Cisco 877W router + wireless WPA

Similar Questions

• Radio card of Cisco 2811 router wireless

  Hello

  Is it possible to configure the card wireless in a router as a customer to use another radio as gateway?

  The situation is that I need to set up Internet access temporary to query users on a local network cable but have no Internet connectivity. I have a Novatel MiFi, which allows Internet connectivity which I want the radio on the router to connect to. In this case, the radio will be more than one client or a bridge.

  Thanks for any input.

  Vincent

  The answer is no. Cisco access points using the Protocol IAPP talk to each other... Cisco with Non-cisco, we cannot communicate...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Cisco Linksys E1000 Wireless-N Router

  If anyone knows please tell me about "Cisco Linksys E1000 Wireless - N Router" and how it is maximum cost?, coz one of my friends have this router and I think to buy it. so I want to know that all the failures have in this series of router. I would really appreciate it.

  Hi supun.aka,

  I can say that it is one of the stable the Linksys routers.  Once you have configured, make sure that the network is secure and the router's firmware is up to date.

• Update wireless WPA on satellite A110-276

  I have the laptop above that has built-in wireless 'WEP '. We again lapop work which has integrated wireless WPA.

  Can I upgrade my satellite WPA Wireless so that they can both work out of the box of wireless router?

  Hello

  WLan encryption depends on the material (WLan card)
  You cannot activate the WPA through day of any driver WLan or LAN troubleshooter.
  If the wireless network adapter does not support WPA you will not be able to afford him.

  You need to replace the minPCI wireless network card or you use a USB WiFi key that supports WPA encryption.

• LAN does not work when the Cisco E1000 router hangs

  Original title: Download sp3

  Remember - this is a public forum so never post private information such as numbers of mail or telephone! I bought recently a new Cisco E1000 router. My computer is a laptop model Lenovo 0769.

  I am running windows XP with sp2. The cisco software requires sp3. I called support of cisco and even they couldn't get to download sp3. My network is wireless on the router and I had to install from another laptop computer on the system. My LAN does not work when hooked. What do you suggest to me.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi mdenrique,

  1. what exactly do you mean by LAN (Local Area Network) does not work? You get the error message?

  If you have not installed Service Pack 3, try the following steps:
  Step 1: Download Service Pack 3
  see How to obtain the latest Windows XP service pack .
  b. scroll the window and click on "Download now the Windows XP Service Pack 3 package" to download the service pack.
  c. save the file on the desktop.

  Step 2: Install Service Pack 3
  a. open the file downloaded and follow the instructions in the wizard to complete the installation.
  b. restart the computer once the installation is complete.

  For more information, see steps to take before you install Windows XP Service Pack 3

  Note: Once you have installed service pack 3, install the router and check if the problem persists.

  Step 3: To troubleshoot LAN, run home and small Office Networking Troubleshooter
  a. Click Start and then click Help and Support.
  b. under Pick a help topic, click Network and Internet.
  c. under network and the Web, click on resolution of networking or Web problems and then click on home and small Office Networking convenience store.
  d. answer the questions in the troubleshooter to try to find a solution.

  For more information, see the following articles:
  1 see How to troubleshoot a network in Windows XP
  2 see two resources to solve the problems of connection network in Windows XP

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer connection on another printer on cisco valet router

  I have a router (R1) provided by Verizon that connects me to the internet. Also connected to this router (R1) is a computer (PC1) and also my Cisco Valet (R2), which gives me connections wireless. Connected to the M20 Highway Cisco is a wireless (PC2) laptop and a printer wireless HP (PR1). Even if the Cisco M20 (R2) is connected to the internal network from Verizon (R1), PC (PC2) and printer (PR1) are on the internal network of Cisco (R2). I want (PC1) to be able to view and print to printer (PR1), but (PC1) on the router (R1) does not see printer (PR1). Laptop computer (PC2) also on Cisco (R2) can see and print it on the printer (PR1) very well, so wireless is not the issue. The issue is that PC1 must pass through and see PR1.

  PC1 <-->R1 R2 <--> <-->PR1

  If anyone can help with the configuration of the router. Thank you.

  What is the IP address of the main router and router M20?

  Ensure that both routers are in the same IP range.

  R1 is connected to the internet port M20?

  You connect 2 routers to each other. Use M20 as a wireless access point.

  Consider that the IP address of the main router is 192.168.1.1.

  Then change the local IP address of the M20 to 192.168.1.2. Disable the DHCP server on the M20.

  Connect the cable to the R1 to the port Ethernet 1 M20. In this way all devices will be in the same IP range.

• WGA54G connection to my router using WPA

  Hi all

  I'll explain my problem briefly, I have 2 PCs of each in another room, I wanted to use WGA54G to connect a PC to my wireless network. I tried to foloow all the tutorials that are available to the general public to connect to my wireless network, but I have no success... I don't know that I did everything correctly. Wireless G indicator is on (green) which means that it is connected to my wireless network. but when I connect the PC itself I won't get any IP address!

  I set up my WGA54G to help on the Web. I wanted to make sure if it is working with WPA security since my router using WPA, which is more secure than WEP.

  Anyone can advice me so that I can not how to use my WGA54G, please if you need any additional information tell me and I can provide you but please solve my problem. I thank very you much for your cooperation.

  If you have connected your WGA54G to your computer, like your dosent adapter games have a DHCP server on it, so every time that you connect your adapter for games on your computer, you must assign a static IP address to your computer.

  Click the Start button > settings > Panel > Network Connections - right click on the icon for the local area network connection and go to properties - in the "Général" tab select "TCP/IP Internet Protocol" and click on the properties button - select "use IP address following" - provide the IP - 192.168.1.5 subnet mask - 255.255.255.0, default gateway - 192.168.1.1 - favorite DNS 192.168.1.1, auxiliary DNS - 4.2.2.2 > click the Ok button to save and click 'Close' on the main properties window.

• WRT160N router wireless and speed Test

  Hello

  I was wondering if someone could help me.  I've just changed in the old Netgear G router to a router cisco Linksys N.  When I'm connected wireless sitting next to the modem and the router of my speed test shows more than 20 on the download, but when I go up a floor in the House it drops at least 2 on the download.  I thought that this router was supposed to expand the range and allow more devices to connect wireless taken less bandwidth.  Is there something I can do to improve the speed in addition to spending my router wireless on the main floor where is most of the navigation on the internet?

  Hahahaha WOW no no not the router to the modem worked!  I went from 1.5 on 15 on downloading downloading when I had about one foot apart from each other!  Awesome.  I have not been very high over the years!

• E2500 Cisco's router dual-band

  Hello

  I just install the Cisco E2500 router and set up my wireless network.

  I bought the router hoping it would give me a more powerful than my old G Linksys 2.4 Ghz signal.

  Using inSSider I see my router and unfortunately it seems that both the 2.4 Ghz and 5 GHz range are both at the same time. I need help. The strength of the signal under RSSI is - 60 to-57 for the 2.4 Ghz and 5 Ghz range.

  I have to turn off one of these groups or what should I do to get a stronger signal?... my old Linksys router was to-50.

  Help... I'm not at all intuitive on routers, but I think that I would have only one band at a time or someother setting needs to be changed in order to improve my signal strength.

  Where we cut a band anyway?

  Any help would be appreciated.

  Thank you

  Tom.

  Hi GV Expert,.

  Thanks for your explanation as to what is measured and its relevance.

  I would like to run the test that describe you.

  First; When you say to connect my computer to a single band, I say - would allow a band to achieve this result?

  In addition, how do you transfer a file, we are talking about transfer between my two computers?

  Thank you for your patience and your help.

  Tom.

• PIX IPSec VPN with Cisco 877W

  Hi all

  I am trying to create a VPN between a PIX and a Cisco 877W tunnel but can't seem to get the tunnel. When I do a 'sho crypto session"on the Cisco 877, I get, he said session state is declining, then changed to NEGOTIATE DOWN, but it is now down again... Please find attached the configs for both ends... Are there commands to confirm that the tunnel is up other than to try to ping the remote end? I would greatly appreciate any help lift this tunnel.

  Kind regards

  REDA

  Hello

  Based on the configurations of joined, to do some changes. For example:

  1. the isakmp policies do not match on the router and the pix. Make sure the hash group Diffie-Hellman and life correspond on the 877 and pix.

  2. the access list for the ipsec traffic must be images of mirror of the other.

  3. make sure life of ipsec on the two peers.

  I hope it helps.

  Kind regards

  Arul

  Rate if this can help.

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• How to recover or find the network key for a router wireless (Netgear)

  Network wireless adapter NIC Ethernet network device

  How to recover or find the network key for a router wireless (Netgear)

  Hi RaymondKramp,

  ·         What version of Windows is installed on your computer?

  If you have lost the key to network and not connected to the network, then you can reset the router to factory settings wireless.

  If you lost the key network and connected to the network, and then log on to the Web page of the router and get the key.

  For more assistance, you can contact Netgear Support:

  http://support.NETGEAR.com/app/home

  Hope this information helps.

• MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless

  MG 7720 - "MP Drivers not can be installed" - Windows 7, router wireless

  It is a Canon PIXMA printer - new.  Everything seems to be downloading fine until it gets to the stage where the MP drivers are downloaded.  At this point, an error message is displayed: "MP Drivers could not be installed" I tried to install with the method of USB cable but no luck there.  I'm at my wits end at this point.  All the advice - please help.  Thank you.

  Hello.

  Try to temporarily disable all firewall or anti-spyware programs on the system when running the installation.  It may be possible that another program is preventing the MP Drivers Installer.

  If you continue to have difficulties, find more help contact us.

• my router wireless guard Plug and go offline.unplug and it works again

  my router wireless guard Plug and go offline.unplug and it works again

  Contact the technical support of the manufacturer of the router.

• How counfigur tp-link router wireless? I have the Wireless ADSL router. I want to add 1 wireless router in this system. What can I do? Please, I beg you. suggest me. ___thank

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?

  1. to configure the router wireless in a network?
  2. I want to set router adsl on a network. How can I do?