Multiple output core
HelloI see that a nucleus may contain "one or more" members of output. But the ShaderJob or using filter in Flash allows for more output. I wrote a kernel filters two inputs (an a vector < number > and the other a BitmapData) outputs corresponding with one criterion. This compiles OK. Is it possible to use it in AS3? Otherwise, I have to run two shaders in order to do this.
The language in the Pixel Bender reference is confusing around this. More than one output is not supported in AS3 or in Photoshop or After Effects.
On a side note, I am really surprised that you were able to compile and run the filter in the Toolbox. I got errors when I tried it on my own machine.
Tags: Pixel Bender
Similar Questions
-
Is a multithreaded using multiple default cores [Linux] application
Hello world
I have a question how the Java virtual machine handles multiple threads on a processor multi-core running Linux [Debian Squeeze, if it is necessary information].
The jvm assigned nets different default kernels? I couldn't find any appropriate documentation for this.
I have read this document (http://developers.sun.com/solaris/articles/overview_concurrent.html) that says that the threads are automatically distributed to the nuclei, but unfortunately this document describes behavior on Solaris OS. Anyone know how it works on Linux (Debian Squeeze)? I guess there could be a difference.
I use JDK5 (Sun implementation) and using the Interface of the executor to start new discussions.
Thx for the suggestions
Edited by: user12842590 the 01.03.2011 06:28
Added application JDK version[url http://java.sun.com/docs/books/jvms/second_edition/html/Concepts.doc.html#33308] Java VM Spec - 2.19 Threads
-
Vocals and guitars/keys using multiple output
Hello
I intend to play a CONCERT with MainStage 3 this weekend, and I'm trying to find a way to make it work. I sing and play on the keys or on guitars. I add a few effects on channel strips in the. I know I could put just outputs of the channels output material, but this will not cause me not to hear anything.
If question 1.
Is it possible to send a string to two independent outputs? for example 1-2 (as my monitor) output and 3-4 for the console?If not, question 2
The other way, I'd do is just send it to THE then set out ancillary differently. Then the question would be - how to send it to the pre fader? So change me the volume will not affect what I'm doing on frontIf you like my so that you got through questions, there is another question asking why my voice sounds like the choir in my ears (as if there are two entrances with a latency, when there is one) I posted it yesterday, but nobody answered yet
Hello
"I know I could put just outputs of the channels output material, but this will not cause me not to hear anything."
Why you say that? Who should produce sound...
But let´s okay focus on your question.
Use option 2 - create a channel at concert level and name such as keyboard and output than your 1/2 material on and do as well send you want.
To choose the post pan, fader pre or post fader, just wait click in the shipment, and the options displayed.
Hope this has helped you.
-
split the signal not showing multiple output
I'm dividing the multichannel signal from acquisition of data NOR-6008. When I connect the data to the separation of the vi signal, there is that a single output eventhough I did the dow to give me all the outputs.
Please help its urgent.
What version of LabVIEW are you using? You can post your VI?
If I remember, one of the versions of LabVIEW had a bug in how the signal split function would work.
-
USB6008 line multiple outputs with DAQmx
Hello
I am trying to connect and control only the direction of a DC 12V the gearmotor using a critical bridge in H Velocty microcontroller requiring a digital input of 3 lines of our NI USB 6008. I was able to use the wizard DAQ to power the motor using 3 functions assistant separated for the 1 task controlling the output of high/low of each line separately, but for this, I have manually to each line output. i.e. 3 Boolean switches should be selected the correct way to move the motor one way or the other.
What I want to do is to use a control Boolean to train the engine turns clockwise or counterclockwise, but can't convert the Boolean control in the form of data that requires the DAQ Assistant. I have to take my entrance and then build the table of 1 x 3 necessary to drive the engine? But then how I let the DAQ know I want that each value in the array to control a different line digital acquisition of data output?
Thank you very much for your help!
Hi Leanne,
Try this. If you have any questions, give a complaint. Also, please look at the examples DAQmx LabVIEW... under 'Help', click on 'Find examples'.
Diane
-
Hello
I'm setting up a host with Esxi4.
Host a 1CPU with 4 cores.
Planning the installation of the vm 2.
Can I connect more than 2 CPU/core to my vm?
If I only assign 1cpu/core to the virtual machine, this means that he cannot use 1core?
I hope that this makes no sense.
Welcome to the community - Yes one vCPU runs on one heart at a time - ig if you want your virtual machine to run on two hearts that you must assign two vcpus - better education is always start with the least amount of vcpus and ad if necessary
-
With the help of several conditional tags with multiple outputs of WebHelp
I have a project that I created for a web application. Within the web application, there are 3 types of customers (business Accts, Accts National and level 1 clients).
I added each help topic associated with the help topics that I created.
Then, I created 3 outputs of webhelp and 3 Table of contents for each type of client.
My goal is to publish the project, where each type of client has their own output generated. Do it this way, which is listed in the help topics of table of contents for each type of customer that is not correctly displayed.
Example: National accounts TOC
What is generated:
I have tagged in the table of contents to the conditional tag appropriate help topics. Help, please. Any advice? I can also be reached at [email protected]
None of your screenshots came through - the icon of camera in the web interface allows you to attach images
-
How to convert (multiple) output lines (multi-column)
HII
I have a weird request. But not sure how to get results out of it!
My query returns two rows to a query I asked.
Current result
10
20
Expected result
10 20
My problem here is that I wanted two values above to be stored in two variables in a single select statement.
If I use a cursor that my problem will be solved. But I'm not much interested in using a cursor for a simple select statement.
is there a possibility that I can convert the output of two lines to two columns?
I use Oracle Release 10.1.0.2.0
Windows Xp operating system.
People here will not appreciate the tags 'Urgent '. I know that :-(.
But some how I'm forced to use this tag "urgent." Sorry for that.
If no response, I will in another way can go to the slider :-(
Any help will be appreciated.
Thank you
Pavan
??? WITH the clause is just a quick way to produce one on the fly table with your sample data. I think you should do a lot of reading material. In any case, use:
select dept, max(decode(rn,1,location,null)) location_1, max(decode(rn,2,location,null)) location_2 from ( select dept, location, row_number() over(partition by dept order by location) rn from ( your-query ) ) group by dept /
SY.
-
Hi all
I have a form that has text_field columns below, from the RECEIVED_FORM_15G table. This table is empty.
(1) CUST_CODE with 1 line item. (Number of items displayed = 1)
(2) ACCT_FD_NO with 10 line items. (Number of displayed items = 10)
There is more than 1 ACCT_FD_NO to 1 CUST_CODE.
When I enter the CUST_CODE and press tab, all ACCT_FD_NO values should appear. I take values in another table called KEC_FDACCT_MSTR ACCT_FD_NO
and in the ACCT_FD_NO, one under the other (topic). So I put in the following code:
BEGIN
PREMIER_ENREGISTREMENT;
FOR CUR_R IN (SELECT ACCT_FD_NO FROM KEC_FDACCT_MSTR WHERE STAUS = 'E' AND ACCT_CUST_CODE =: CUST_CODE)
LOOP
NEXT_RECORD;
: ACCT_FD_NO: = CUR_R.ACCT_FD_NO;
END LOOP;
END;
But the problem is that I'm not able to view the value captured in the next consecutive line items.
It appears in the first and second line item only.
The first value gets displayed in the first column, then the cursor moves to the first line item in the second line of command,
the second value is shown in the second line of billing, (it's because of NEXT_RECORD in my code)
more later all the values displayed in the second line item only. (I checked with message call.)
I want it to display one under the other.
The problem is that the cursor does not move to the third line item after the second line item.
If the remaining values gets displayed in the second line item only.
So what is the problem in my code?
Where should I put the next_record to move the cursor from one line to the next line item item IE the second line item to the third line item
& the third line item in the fourth line of billing and so on... Please let me know.
Thank you.
Is Oracle Designer 6i
Oracle 9i.
The above code is just...
The only error was in the palette property of CUST_CODE, 'required' was not set to 'Yes'.
So after the setting for the 'YES', this has worked perfectly well.
-
Using the procedure with multiple output variables in a query
Hello
We have a process that takes time, which returns 4 variables as out parameters:
The id uniquely identifies a product in our database.procedure calc_values(id in number, val1 out number, val2 out number, val3 out number, val4 out number) is
I would use it in a query (or view), in the form
I tried the following approach, but I'm kinda stuckselect s.id, val1, val2, val3, val4 from something s, product_table p where s.id = p.id
define the type
define an array of this type
write a wrapper function that calls this procedure and returns the results as a table
* the PivotTable in columns
* join this with the product table
It's like I'm on the wrong track, I'm struggling to retrieve the id of the product table in the wrapper function.
Is there a better approach for this? I'm on oracle 10g
Thank you!
RobBelow is my interpretation of what you were asked to do. I don't really know what you want to do or what you need to do.
CREATE TYPE prod_vals_def AS OBJECT (VAL1 NUMBER, VAL2 NUMBER, VAL3 NUMBER, VAL4 NUMBER ); create or replace TYPE prod_vals_tab AS TABLE OF prod_vals_def; CREATE FUNCTION pvals (p_prod_id NUMBER) RETURN prod_vals_tab PIPELINED AS TYPE ref0 IS REF CURSOR; cur0 ref0; out_rec prod_vals_def := prod_vals_def(NULL,NULL,NULL,NULL); BEGIN -- CASE replacing SELECT against table I'm not going to create CASE p_prod_id WHEN 1 THEN out_rec.val1 := 1; out_rec.val2 := 2; out_rec.val3 := 3; out_rec.val4 := 4; WHEN 2 THEN out_rec.val1 := 2; out_rec.val2 := 3; out_rec.val3 := 4; out_rec.val4 := 5; WHEN 3 THEN out_rec.val1 := 3; out_rec.val2 := 4; out_rec.val3 := 5; out_rec.val4 := 6; WHEN 4 THEN out_rec.val1 := 4; out_rec.val2 := 5; out_rec.val3 := 6; out_rec.val4 := 7; ELSE out_rec.val1 := 0; out_rec.val2 := 0; out_rec.val3 := 0; out_rec.val4 := 0; END CASE; PIPE ROW(out_rec); END pvals; WITH s_tab AS (SELECT 1 AS prod_id FROM dual UNION ALL SELECT 2 AS prod_id FROM dual UNION ALL SELECT 3 AS prod_id FROM dual UNION ALL SELECT 4 AS prod_id FROM dual ) SELECT s.prod_id, p.val1, p.val2, p.val3, p.val4 FROM s_tab s, TABLE(pvals(s.prod_id)) p PROD_ID VAL1 VAL2 VAL3 VAL4 -------- -------- -------- -------- -------- 1 1 2 3 4 2 2 3 4 5 3 3 4 5 6 4 4 5 6 7
-
I made this Web page which displays the products and where they are. I am putting in place to allow the user to see only the products in their region. I use a menu of rerouting to display from the query all provinces, they are, but the cfoutput shows all over even if they are duplicates. is it possible to prevent the return of do.
For example:
Chevy 78, Toronto ON
2003 Toyota, Toronto ON
65 ford, Toronto ON.
Now on the menu for rerouting (or if you know a better method) I only want it to show up once the 'ON', instead it is back ON 3 times in the menu dropdown. Is there a way to prevent this?
Thank you
What is
Select a separate province
of SaleItemsorder by province
-
How to automate multiple output of a single input image file names?
I have about 100 eps 4000 pixels wide to treat everyday CMYK images. The site needs of several editions of the same image jpeg: 1000 pixels wide, 850 pixels wide and 80 pixels wide.
Question:
Can I load the single source and save three exits named differently through a single drop?
I expect an automatism-> response of the lot, but I'm a programmer. I haven't touched ExtendScript nor anything in CS scripted, but I can certainly read about it. References to methods that would do a "save under" very similar to save Jpeg for the Web or I can download examples? All links would be useful.
You can find many examples in ps - scripts.com
-
Route signals to output multiple CS6
Hello! Is is possible to route the output signal to multiple output on my interface at the same time? And if so, how to set up that?
Best regards, Charles
The only way I think you can do is put in place several fade after sending each channel, one for each output you want to use. You need a bus to each separate output that you want, and then you have to allocate to each shipment of each channel to a bus each - if you see what I mean.
What you have actually done at this stage is to make the master output redundant, and each bus, with the channels that you want to use sent to her, becomes a new master. Each bus can be allocated specifically to the release of material. Well, it's a little difficult to set up, but it should work.
-
Output multi no instruments not working after 10.2.3
I use many instruments to multiple, output as Steve Slate Drums, where I bus each instrument (kick, snare) in its own way. This allows me to mix and to treat it as a real battery. However, after update Logic 10.2.3, I can use is more instruments to multiple output. Quite simply, it comes out a track and won't let me not re - assign. If I open a new instance of Steve Slate then it works, but for the whole of the existing session, I have (hundreds) al of the drums now out one channel, all the mixture I did make unnecessary. If anyone else has experienced this? Who can I write to the logic of let them know?
Hi Todd
Check if there is an update of the software.
You could try to remove LogicPro preferences and see if it helps.
You can use the "send feedback to Apple" under the Menu bar makes sense to send bug reports. Most likely, you won't hear them, but they do not read the reports and the more people complain, faster a hotfix or feature will be added.
Good luck!
Hope this helps, Greg
-
I use an app that plays back "multi-way" called reading. It has a feature called auto pan which has a toggle button, but when I turn IT says, "Only works with 2 iPad release." My iPad 2 Air apparently has this feature, but the iPad 2, that they have in our rehearsal studio does not work. I'm trying to find out what iPads have this feature, but looking at the specs on the Apple website is not to give me this info! Can someone help me? And I'm not sure I understand because the headphone jack released in stereo must be some different internal separation type pass...?
Thanks much for any help!
What to do with it, their Web site?
AutoPan
Enable AutoPan in parameters to pan the ClickTrack and Guide to the left and all other channels to the right. CustomMixes are made this way before, but you should choose Auto-pan to separate the Guide and ClickTrack for multitrack in the show alive. AutoPan is necessary when using two outputs.
and
Multiple output
Using a compatible USB Interface, you can send several of your iPhone or iPad to your soundboard Audio outputs. For a list of devices compatibleclick here. (Device upgrade Premium) (which takes you to http://www.multitracks.com/products/playback/supported/)
Maybe you are looking for
-
This could be a huge sentence, I connect to my computer and I opened firefox, but its frozen on a gambling site online and google home page (both browsers) they were the previous two my websites on firefox, I don't know what was with my last update w
-
On the previous version - 3.6.17, the Navigation toolbar has arrows to return to a single page, go to a page and a drop down tab for the recent pages menu.New version leaves out unrolling of the tab. I use it constantly. But since he's not here, I we
-
where the entries in the context menu for folders, drives and objects of the Namespace?
There is an icon of DriverCure problems 21 message found on the bottom right of the screen. How can I remove DriverCure? What happens if DriverCure?
-
Does anyone know when they will update HP Support Assistant for Windows 8.1 64bits?
Anyonre know when HP will release an update for HP Support Assistant for Windows 8.1 64 bit or are we suppose to fight with whatever we have, which stops working all the time.
-
Vista E521 DVD drive does not recognize media
My dvd writer (a tsst 653A) is not recognizing any media inserted into it - I have an E521 with Vista. I uninstalled roxio, which is another question-total, because it wouldn't burn DVDs & then decided, it does not recognize no matter what media in d