Multiple select FilePicker
How can I use the qml FilePicker but allow users to select multiple files.
I have it
mode: FilePickerMode.PickerMultiple
Tags: BlackBerry Developers
Similar Questions
-
Settlement data based on multiple selection ListBox reference need help
Hello again,
The question that I have is selecting from a listbox with multiple selection to fill the tables with the selected data. My code is as follows:
Void loadData_EventClick (ByRef This)
Dim j
Dim k
k = 0
If ListBox.MultiSelection.Count = 0 Then Exit Sub
For j = 1 To ListBox.Items.Count
If ListBox.MultiSelection (j). Count = True Then
k = k + 1
End If
Next
TextBox.Text = k
End Sub
The code works perfectly up to the second if statement. My current channel group list contains 16 channels and with the second if statement guided the textbox output is equal to 16 (i.e. k = 16), which is what I expected. Im just using the k = k + 1 for the test. Eventually will be replaced by operating code specific to what I need to do.
So the question that I have is to get the code to recognize what values are selected and referring to the index for the selections in a table. Im not sure on how to do it.
Any help is very appreciated.
Thank you
~ Nathan
Attached JPEG shows the current user interface and the output of k with the second if statement commented
Hey Nathan--
ListBox.MultiSelection () is a function that returns an array of [multiple] selected items in ListBox.
ListBox.MultiSelection.Count is a property that returns the number of items in the table above.
Therefore, the logic in your second IF statement that says if ListBox.MultiSelection (j). Count = True really makes no sense because:
- The array returned by the multiple selection (using (j) indexing now refers to a single selected item in the list (which has not its own 'Count' property)
- If you don't the array index, assuming that you had selected 4 items in your list, your statement would still be actually as said if 4 = True which is not what you get.
Make sense?
Here is a modified version of your code that I hope makes it a little more obvious how these elements relate to one another. Give it a run; of course, 75% of the code is extranneous to you working end to account, so make sure that you subsequently delete what you won't need.
Sub loadData_EventClick (ByRef This) ' creates the event handler
Dim j
If ListBox.MultiSelection.Count = 0 Then Exit Sub
TextBox.Text = "Total ListBox items:" & ListBox.Items.Count & + "" \n "".
TextBox.Text = TextBox.Text & "Total selected items:" & ListBox.MultiSelection.Count & + "" \n "".
TextBox.Text = TextBox.Text & "Selected Items:" & + "\n"
For j = 1 to ListBox.MultiSelection.Count
TextBox.Text is TextBox.Text & ListBox.MultiSelection (j). Text & ", index" & ListBox.MultiSelection (j). Index & + "\n"
Next
End SubYou are making great progress; It will get quickly easily faster and we are here to help – do not hesitate.
-
Multiple selection in string tree
I make a tree with line 15, I set the selection to 1 or more. now, I want to make a multiple selection of tree to appear in control of the chain, how can I do this?
Thank you
Use the Value property:
The order in "response" will be the order that items have been selected.
-
How can I do a multiple selection in Enum control or control of the ring or control Combo box
How can I do a multiple selection in Enum control or control of the ring or control Combo box
You can not.
You can use a listbox control.
An alternative solution is to write the code and each selection, the user gives an enum, for example, can be send to a table and invite the user to continue to select...
-
Problem Manager multiple selection with system dialog box
I currently have a problem with the help of system on a manager of multiple selection dialog as the code below works fine:
multiSelectHandler { status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged actions: [ DeleteActionItem { id: deleteActionItem onTriggered: { var selectionList = listView1.selectionList(); var selectedItem = dataModel.data(selectionList); console.log(selectedItem); for (var i = 0; i < selectionList.length; ++ i) { _sql.deleteClient(dataModel.data(selectionList[i]).clientID) dataSource.loadData() } } } ] }
However, when it is changed to use that a dialogue system, the feature does not work and the console record results:
selected list: undefined
selected item: undefined
multiSelectHandler { status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged actions: [ DeleteActionItem { id: deleteActionItem onTriggered: { multiSelectDeleteDialog.show() } attachedObjects: [ SystemDialog { id: multiSelectDeleteDialog title: qsTr("Delete Clients") + Retranslate.onLocaleOrLanguageChanged body: qsTr("Are you sure you want to delete these clients?") + Retranslate.onLocaleOrLanguageChanged onFinished: { if (result == 3) { console.log("Cancelled") } else { console.log("Deleted") var selectionList = listView1.selectionList() console.log("selected list: " + selectionList) var selectedItem = dataModel.data(selectionList); console.log("selected item: " + selectedItem); for (var i = 0; i < selectionList.length; ++ i) { _sql.deleteClient(dataModel.data(selectionList[i]).clientID) dataSource.loadData() } } } } ] } ] }
With the help of Roger Leblanc, it works now
multiSelectHandler { status: listView1.selectionList().length + qsTr(" Clients Selected") + Retranslate.onLocaleOrLanguageChanged actions: [ DeleteActionItem { property variant selectionList property variant selectedItem id: deleteActionItem onTriggered: { deleteActionItem.selectionList = listView1.selectionList() deleteActionItem.selectedItem = dataModel.data(selectionList); multiSelectDeleteDialog.show() } attachedObjects: [ SystemDialog { id: multiSelectDeleteDialog title: qsTr("Delete Clients") + Retranslate.onLocaleOrLanguageChanged body: qsTr("Are you sure you want to delete these clients?") + Retranslate.onLocaleOrLanguageChanged onFinished: { if (result == 3) { console.log("Cancelled") } else { console.log("Deleted") for (var i = 0; i < deleteActionItem.selectionList.length; ++ i) { _sql.deleteClient(dataModel.data(deleteActionItem.selectionList[i]).clientID) dataSource.loadData() } } } } ] } ] }
-
Can't get multiple selections of work ListView
The example code here seems very simple:
https://developer.BlackBerry.com/native/reference/Cascades/bb__cascades__multiselecthandler.html
I use the code example to use with ListView as my model:
ListView { id: listView objectName: "listView" dataModel: photosModel.photoGridModel snapMode: SnapMode.LeadingEdge layout: GridListLayout { id: gridListLayout objectName: "gridListLayout" } onTriggered: { var newPage = photosPageDefinition.createObject(); photosModel.setPage(newPage); navigationPane.push(newPage); navigationPane.peekEnabled = false; photosModel.launchFullscreen(indexPath); } multiSelectAction: MultiSelectActionItem {} multiSelectHandler { // These actions will be shown during multiple selection, while this // multiSelectHandler is active actions: [ ActionItem { title: "Tag" imageSource: "asset:///images/tag.png" onTriggered: { // TODO } }, ActionItem { title: "Share" imageSource: "asset:///images/share.png" onTriggered: { // TODO } }, ActionItem { title: "Move" imageSource: "asset:///images/folder.png" onTriggered: { // TODO } }, DeleteActionItem { } ] status: "None selected" onActiveChanged: { if (active == true) { console.log("Multiple selection is activated"); } else { console.log("Multiple selection is deactivated"); } } onCanceled: { console.log("Multi selection canceled!"); } } }
When loading the application, I long press on an item in the GridView control and nothing happens.
Can you clarify what this means 'does not '?.
EDIT:
OK, now I see. To make it work, you must set an empty or nonempty ActionSet for each listitem.
StandardListItem { title: ListItemData.title contextActions: [ ActionSet { } ] }
Now, it will work.
-
Need to field multiple select the option without having previously selected deleted
Hi all
Request Express 4.1.1.00.23
Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
I have a requirement of adding a field of multiple selection to a single screen, and I added the list to multiple selection, without a second thought. Of course, the question is when a user tries to edit a record, click on (with the CTRL key) two options in the selection list multiple, but not clicked on those previously selected, then we lost them. Then I thought to create checkboxes and thus those already selected will be always checked when try to update.
But I want to do with the multiple selection field. So I was wondering if there is a way?
Thank you!
Sam82 wrote:
Request Express 4.1.1.00.23
Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production
I have a requirement of adding a field of multiple selection to a single screen, and I added the list to multiple selection, without a second thought. Of course, the question is when a user tries to edit a record, click on (with the CTRL key) two options in the selection list multiple, but not clicked on those previously selected, then we lost them. Then I thought to create checkboxes and thus those already selected will be always checked when try to update.
But I want to do with the multiple selection field. So I was wondering if there is a way?
This is the behavior expected multiple-selection list. It can be changed using a point hidden shadow and JavaScript, but there is no way out of the box to achieve what you propose.
Selections several lists are usually a bad idea:
- Users do not know how they work
- They are confused and source of errors, except if all options are visible (which generally wastes space UI)
- The resulting values of treatment is problematic
- They are often the cause of a model of incorrect data or result
Checkboxes or a shuttle are much better options and controls for multiple choice options.
-
Add the data in a field of multiple selection?
Just got got off the phone with the support of Eloqua ask about the possibility of adding data in a field of multiple selection over time. Apparently, it's possible through mailings of form, but no list will be mailed. Wouldn't be great if during a download list, you had the ability to add data from a field in your file .csv for existing values in this area in Eloqua. Here's a use case for this scenario... in our society of industry can be part of multiple market segments. Depending on the event, a person can feel they are part of the market segment 'Radar', but another event specializing in Sonar... they indicate that they are part of the market segment "Sonar", both being true. There is currently no easy way to enter these data in Eloqua over time as part of the downloads from the list. Based on the scenario above, the existing value is 'Radar', but if "Sonar" is the value of the field for the next download it replaces the value of 'Radar '. Ideally, we would be able to capture the two values.
I said that if there is enough interest in this idea, Eloqua would consider developing a new option for downloads from the list add vs crush. I hope others can find a use case for this idea.
Hi Tina,
I know it's a bit old but I had a simular problem on adding values to a multi select. Here's how I approached it.
1. Add a text based contact field Eloqua to transfer your csv values. Let's call it "MultiSelect download Value" for this example.
2. Add Eloqua add values to a multiselect contact field. What we'll call "MultiSelect Final.
3. create a program that will add the download list.
4. in the program, create a step to update Contact data
. in the update rule, update "Definitive MultiSelect' field, Append the value in the field value, value will be hardcoded, check use a delimiter": ", marks the conditional rule the field" value to download MultiSelect "equals the value hard coded or one that you would like the field to be.
b. create all update settings you need for your data.
I approached this way because our downloads from the list should be add the data over time. The field ' value to download MultiSelect ' allows it to be overwritten on each download.
Let me know if you want more details.
Thank you
Blake
-
Limit of characters in multiple-selection list
Hi people,
Throw this out there to see if anyone has had this problem, and how they may have gotten around him.
It seems that the Multi Select lists have a limit of 1000 characters, i.e. If you select so many items in the list and its over 1000 characters, you cannot save the file.
I would like to say that ok we will have to just a few lists rather than a big workaround, but the customer fixed the list up in this way, and now that we create the hypersite to allow them to select items in this list, it's possible they could try on the hypersite select all. Clearly, it seems that we will have to have validation on the website to ensure that they do not select more than 1000 characters of a value of items in the list, but it would be useful if there was a way Eloqua to enable this.
The one you have any ideas/advice?
Something is very appreciated.
Thank you
Andrew Mc.
I think the challenge is that the multiple-selection list is already built and already used in other functions.
Andrew - you're right that to resolve this problem, you would have to update the list in Eloqua (again, just the option values, not the option names) and also the list in SFDC - you are on right track here.
I hope this helps!
-
Why multiple selection in parameter throwing error BI publisher 11g?
Hi all, I have under SQL statement with parameters.
Select 'TABLE_A '. "" s_number "as"s_number. "
'TABLE_A '. "" SM "like"sm. "
'TABLE_A '. "" Loc "as"loc"
'TABLE_A '. "" Co "as"co. "
'TABLE_A '. "" s "as"dry. "
'TABLE_A '. "" m_days "as"m_days. "
'TABLE_A '. "" b_time "as"b_time. "
'TABLE_A '. "" e_time "as"e_time. "
'TABLE_A '. "' build ' as"build. "
'TABLE_A '. "" RM "as"rm"
'TABLE_A '. "" aid_credits "as"aid_credits. "
"TABLE_D. "" Co "as"co_1. "
"TABLE_D. "" co_des "as"co_des. "
"TABLE_D. "" pre_co_des "as"pre_co_des. "
"TABLE_D. "" cont_cou_des "as"cont_cou_des. "
"TABLE_D. "' end_sm ' as 'end_sm '.
"St." » « « « dbo ». » TABLE_A' 'TABLE_A '.
"Left outer join"st. " """dbo"."" TABLE_D""TABLE_D.
on ('TABLE_A'. "Co"= "TABLE_D". ("" Co ")
where ('TABLE_A'. ("" in(:PSM) SM "or: PSM is null)
and ('TABLE_A'. ("' in(:PLOC) Loc" or: PLOP is null)
and ('TABLE_A'. ("" in(:PCO) Co "or: BCP is null) and"TABLE_D. "" end_sm "="
order by 'TABLE_A '. "' s_number ' ASC
I defined in the parameter section
multiple selection is enabled
can select all is selected
NULL value last selected for all parameters: PSM, PLOP, BCP
now my question is that if I select more than one value in the settings it throws error «an error has occurred on xml data recovery»
oracle.xdo.XDOException: java.sql.SQLException: type [Hyperion] [SQLServer JDBC Driver] [SQL Server] non Boolean expression specified in a context where a condition is expected, near ', '.
Please help me what is?
Kind regards
Sam
For this reason, the error is: PSM is null,: PLOP is null and: BCP is null.
Because it is possible to assign multiple values to a variable to link plain. You must manage this in different ways.
If she is Oracle DB - decode(:PCO,null,columnxxx,'dummy')
-
How to enable multiple selection in a TableView via dragging the mouse
Hello
I work multiple selection in my TableView but only via the combination SHIFT + click or by using the keyboard, but how can I enable selection of multiple rows in the table via a drag of the mouse? It doesn't seem to work out of the box.
Thank you
Robert
Take a look at this thread:
Re: How can I select multiple cells in tableview with javafx only with the mouse?
-
Multiple selection works only not active based on
Hello
I tried to create an asset base with a multiple selection, but it strives to 7.6, but not in 11g. Not able to select multiple values from the drop down.
The default tag is not is also reflected. Here is the code I use.
< NAME of ASSET = 'Changes' DESCRIPTION = 'Changes' MARKERTEXT = "' * ' PROCESSOR ="5.0"DEFDIR =" / apps/shared/storage/ChangeSet_Test1 ' RENDERUSINGTEMPLATE = 'no' > "
PROPERTIES of <>
< PROPERTY NAME = "AssetTypes" DESCRIPTION = "AssetTypes" >
< STORAGE TYPE = "VARCHAR" LENGTH = "30" / >
< TYPE INPUTFORM = "SELECT" MULTIPLE= 'YES' SOURCETYPE = "STRING" VALUES = "Left, Right and Center" DEFAULT= "" OPTIONDESCRIPTIONS = "Left, centered, right" / > "
< SEARCHFORM DESCRIPTION = "AssetTypes updated / created" TYPE = "SELECT" SOURCETYPE = "STRING" VALUES = "Left, Right and Center" OPTIONDESCRIPTIONS = "Left, centered, right" / >
< / PROPERTY >
< / PROPERTIES >
< / ASSETS >
Concerning
Bishnu
Hello BishnuSatpathy,
This is a known bug prior 11.1.1.8 patch 4.
For more information, please see note 1587776.1
I suggest that you upgrade your version to 11.1.1.8 patch 5 to solve this problem, or you can also try the workaround mentioned in the note
1 - Open the [PATH_TO_SHARED_FOLDER]/elements/OpenMarket/AssetMaker/BuildEditSelect.xml file
2. remove the dojoType = "the attribute fw.dijit.UISimpleSelect" lines 67 and 115 "
3 - restart the application.
4. multiple items can be selected after you make this change.
BTW, do not forget to add SIZE = "4" in the INPUTFORM, otherwise you get a narrow selection box.
Concerning
David
-
Filter Gallery multiple selection in Muse?
Is there a widget that makes possible by selecting several categories in a gallery?
Like this (http://designwoop.com/labs/filtered-portfolio/), but with the ability to select categories A and B without selecting C?
I saw some of the filters gallery here (is it possible Muse? portfolio tri), but none of them does support multiple selection, I see.
You can try this:http://musewidgets.com/collections/all/products/gallery-filter
or if you host the BC then you can use Web app to create a gallery and add the filter values.
Thank you
Sanjit
-
Is there a way to multiple selection data source in a Web App?
I created two Web Apps. I'm trying to multiple selection of one of the lists.
The idea is - I have a list of manufacturers and a list of distributors, a few hundred in each list. I would like to be able to set up a select field type 'data source' Web App Distributor and for that to be a function of multiple selection.
Does anyone know how to do this?
Web apps are only a 1 to 1 relationship, BC at this time doesn't support 1 to many, or many-to-many on web applications. If you can't sorry.
-
Multiple selection with binding variable error
Hello world
I tried to put in place an array of adf multiple selection with another table, by following the tutorial (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/75-multi-parent-row-detail-views-328078.pdf), page 3.
I created all things and first of all I had an exception error, which I fixed, but now, whenever I try to select multiple lines, it won't update the table of the adf.
In this example, I choose a service line and it shows the emplooyes, but every time I try to choose another line by ctrl clicking on it, the employees table be updated.
Since I tryied to follow the tutorial, I'll put the code for the bean, I created for this purpose (it's a little different than the code given by the tutorial, but only because I had to get rid of the exception error)
I use jdeveloper Studio Edition Version 12.1.2.0.0.
Here is my code for the bean.java:
Select listen port defined for the departments table. The selected line keys are read in the reference table.
For each line, the Department ID value is read and added to a string buffer that generates a comma-delimited
List of the departmentIds. In the end, this string is passed as an argument to the link of action ExecuteWithParams
{} public void onDepartmentTableSelect (SelectionEvent selectionEvent)
variable to hold the string containing the selected set value line departmentId
StringBuffer departmentIds = new StringBuffer();
Go to the main table to read selected line keys
RicheTableau rt = selectionEvent.getSource ((richeTableau));
RKS RowKeySet = rt.getSelectedRowKeys ();
Iterator selectedRowsIterator = rks.iterator ();
memorize the current line to place it back in the end key
CurrentRowKey () rt.getRowKey = (list);
for each selected master line, determine the departmentId
int size = 0;
{while (selectedRowsIterator.hasNext ())}
size ++;
The rowKey () selectedRowsIterator.next = (list);
each value is terminated by a comma
If (departmentIds.length () > 0) {}
departmentIds.append(",");
}
take the current line
rt.setRowKey (rowKey);
JUCtrlHierNodeBinding wrappedRow = rt.getRowData ((JUCtrlHierNodeBinding));
Line rw = wrappedRow.getRow ();
/*
Number departmentId = (number) rw.getAttribute ("DepartmentId");
*/
int departmentIdInt = rw.getAttribute ("DepartmentId") (Integer);
oracle.jbo.domain.Number departmentId = new oracle.jbo.domain.Number (departmentIdInt);
departmentIds.append (departmentId.stringValue ());
}
back the foreign currency on the line
rt.setRowKey (currentRowKey);
Run the query on the detail table
BindingContext bctx = BindingContext.getCurrent ();
BindingContainer links = bctx.getCurrentBindingsEntry ();
OperationBinding executeWithParams = bindings.getOperationBinding("ExecuteWithParams");
executeWithParams.getParamsMap () .put ("departmentIds", departmentIds.toString ());
executeWithParams.execute ();
refresh the detail table
AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance ();
adfFacesContext.addPartialTarget (employeeTable);
}
}
If someone has an idea of why it isn't updated table, please answer. Any idea can help.
Thanks in advance.
Greetings,
Frederico Barracha.
Finally, I found the problem...
The problem was that I had to remove a line in the properties of my table, the property services: selectedrowkeys, because he only spent the last selected row.
Yet, I apreciate the help and I had to replace a code in the bean.java, in reason of the exception error and you had to do. Maybe I did a configuration in the wrong way and he would not.
Thanks for the help.
Kind regards
Frederico.
Maybe you are looking for
-
It is typical for firefox send an alert virus with a phone # to call to solve the problem?
I got a warning on my computer today saying that my computer was threatened by a virus. The warning gave a phone number I should call and give me instructions on how to remove the virus. I'm afraid that this warning is actually a scam if I don't want
-
How can I restore delicious sidebar?
I've just converted from v.3.6.24 to v.8. I use Delicious bookmarking system. When v.8 opened its doors, I could see the delicious sidebar. I closed the sidebar to get a better view and now I can't find a menu item that you want to restore. V.3 there
-
Is the latest driver for the PXI-5402 OR-FGEN 14.0
I have LabVIEW 2014 installed on my PC and then I reinstalled OR-FGEN 14.0 but according to me, he said that there was either a patch or service pack, or a newer version available. Is this correct or is 14.0 the latest driver FGEN?
-
600 G1 powers during the night.
I have a new Pro 600 G1 with the last BIOS installed 2.21. The user said after the shutdown of the system (out of service) for the day, morning it's back the morning. This has happened several times since the PC was installed less than 2 weeks ago.
-
Why my network drives mapped reconnect when disconnected from my laptop?
Whenever I have withdraw my machine it fails to reconnect to a network drive while you are using the wireless. It's quite strange, because if I anchor again it not is not even reconnect on LAN.