Multiple SSID may not be broadcast AP 1242

Similar Questions

• datpiff may not broadcast on firefox, but on all other browsers, it's OK? It's embarrassing

  datpiff may not broadcast on firefox, but on all other browsers, it's OK? It's embarrassing

  check these links urself, they spread smoothly on chrome, etc.

  http://www.datpiff.com/pop-mixtape-player-2014.2.php?Mediaid=m24050af & TrackID = 6

  but firefox? Forget it

  The link you provided above also works on my Firefox browser. Maybe you do not have Flash installed or your version is perhaps obsolete.

  Please check if all your plugins are up to date. To do this, go to the Plugin Check site.

  Once you are there, the site will check if all your plugins have the latest versions.
  If you see in the list of plugins that have a yellow button to update or a red button update now , please put to update these immediately.

  To do this, click each yellow or red. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps in the installation process.

• Broadcast the ssid on WLC for multiple ssid

  Hello

  I'm looking to broadcast the ssid as 13 on the controller, but another 2 not broadcasting. can we do this? It will be totally 15 SSID, provision of services to clients over several suppliers.

  Thanks in advance

  Hello

  By default, the Cisco access point supports 16 SSID... If you want 15 SSID in werving network customers then its possible at the level of the problems... If the SSID is not broadcast, check if customers correctly enter the credentials and create a manual profile on the laptop or something... it will work.

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• Unique SSID from the multiple SSID

  Hello

  We seek to deploy wireless at five sites great campuses, one in each State.

  Does anyone have any ideas on the deployment unique verus multiple SSID SSID for each location.

  Are the benefits of filing a return and security to identify red devices associated with

  a unique SSID.

  The question was raised that it would be easier to configure one SSID to scan wireless

  devices that have separate SSID different places.

  Would appreciate any experience on this design

  Mate,

  Remember, when you're dealing with WLC, you do not configure the APs.  You configure the WLC and configs will be propatated of all APs manages the WLC.

  The WLC, you can use up to 18 SSID but you can configure 1 024.

  Currently, I have three SSIDS and one of them is for VoWLAN.

  Moreover, some hand scanners do not like the (hidden) SSID broadcasting.

• BVI Interface inaccessible since the addition of multiple SSID

  Announcement to the community for the first time.

  I have a simple HomeLAN which consists of a Cisco router for series 800-> switch PoE Cisco3560-> Cisco Aironet 1131AG Access Point.

  Everything works well for a while in which I had a simple port to "change the access mode" configured on the switch facing the AP and one SSID on the access point that is configured in stand-alone mode (without controller).

  My provider has enabled IPv6 on my broadband connection and I started to reconfigure my installation this afternoon to allow this.

  I decided to run only a bunk Dual LAN and a separate native IPv6 only test LAN for proof of concept.

  With this in mind, I changed the switch port to the access point to a "mode trunk switch' using simple dot1q encapsulation. I have also consulted the post helps very https://rscciew.wordpress.com/2014/05/24/multiple-ssid-configurations-on... after finding in this community post on the topic of multiple SSID https://supportforums.cisco.com/discussion/10899511/how-broadcast-2-ssid...

  I have now two SSID broadcasting (we will call double stack and ipv6 only for the sake of the argument). The SSID double stack uses VLAN 2 and 1 bridge, while the SSID only ipv6 uses 6 VLAN and bridge 6.

  I must stress at this point that my router (where I want to layer 3 for the two LANs gateways) I have DHCP, DHCPv6 and SLAAC configured on relevant VLANs.

  I seem to be the 2 VLAN trunking of properly and I can see the SSID broadcast in my house. I can connect to the SSID (authenticate and form an association as seen in 'show the dot11 association'), but I don't get an IPv4 address or IPv6 assigned to all clients (I tried Mac OS x, iOS, Android, and Windows phone). Furthermore, I can't ping the IP bvi1 of the AP - that is the element that is annoying me more that I must console to the AP to make any changes at all.

  Here is an overview of my AP configuration, with relevant parts removed for safety...

  dot11 syslog
  !
  dot11 said ipv6 only
  VLAN 6
  open authentication
  shared authentication
  authentication wpa key management
  MBSSID-guest mode
  WPA - psk ascii 7
  !
  dot11 said double stack
  VLAN 2
  open authentication
  shared authentication
  authentication wpa key management
  MBSSID-guest mode
  WPA - psk ascii 7

  interface Dot11Radio0
  no ip address
  no ip route cache
  !
  the cipher mode vlan 6 encryption tkip aes - ccm
  !
  the ciphers of vlan 2 encryption tkip aes - ccm mode
  !
  has declared ipv6 only
  !
  such double stack
  !
  MBSSID
  root of station-role
  Bridge-Group 1
  Bridge-group subscriber-loop-control 1
  Bridge-Group 1 block-unknown-source
  No source of bridge-Group 1-learning
  unicast bridge-Group 1-floods
  Bridge-Group 1 covering-disabled people
  !
  interface Dot11Radio0.2
  encapsulation dot1Q 2
  no ip route cache
  Bridge-Group 2
  the bridge-group subscriber-loop-control 2
  Bridge-Group 2 block-unknown-source
  No source of bridge-Group 2-learning
  No extinction unicast by bridge-Group 2
  Bridge-Group 2 covering-disabled people
  !
  interface Dot11Radio0.6
  encapsulation dot1Q 6
  no ip route cache
  Bridge-Group 6
  the bridge-group subscriber-loop-control 6
  Bridge-Group 6 block-unknown-source
  No source of bridge-Group 6-learning
  No bridge Group 6 unicast-flooding
  Bridge-Group 6 covering-disabled people
  !

  interface FastEthernet0
  no ip address
  no ip route cache
  automatic duplex
  automatic speed
  Bridge-Group 1
  No source of bridge-Group 1-learning
  Bridge-Group 1 covering-disabled people
  !
  interface FastEthernet0.2
  encapsulation dot1Q 2
  no ip route cache
  Bridge-Group 2
  No source of bridge-Group 2-learning
  Bridge-Group 2 covering-disabled people
  !
  interface FastEthernet0.6
  encapsulation dot1Q 6
  no ip route cache
  Bridge-Group 6
  No source of bridge-Group 6-learning
  Bridge-Group 6 covering-disabled people

  Bridge IRB

  1 channel ip bridge

  interface control2
  MGMT AP Interface Description
  address 192.168.1.6 IP 255.255.255.0
  no ip route cache

  IP default-gateway 192.168.1.50

  As you can see I can not ping the gateway of AP - I would be very grateful if someone could point me in the right direction with regard to what I'm doing wrong here?

  Thank you

  Mick

  OK means your AP is to have IP vlan2:

  Do it like this and try again:

  !

  interface Dot11Radio0.2
  encapsulation dot1Q 2
  encapsulation dot1Q 2 native
  Group 1 bridge
  Bridge-Group 2
  !
  interface FastEthernet0.2
  encapsulation dot1Q 2
  Group 1 bridge
  encapsulation dot1Q 2 native
  Bridge-Group 2

  !

  Or alternatively, you can delete the name native dot11radio0 and fa0.2. (It should also work without it), but be sure that for vlan 2 you have bridge Group 1.

  Concerning

  Remember messages useful rates

• RAID 0 for a RAID configuration not "this computer's hardware may not supported booting from this drive.

  I want to install a new HARD drive in a tower of the mine to a friend. It was initially created as a RAID 0 configuration with two 160 GB HDD. The replacement is a single 1 TB of HARD drive. I get the message "this computer's hardware may not supported booting to this disk.» Am I missing an approach from a RAID 0 for a RAID configuration, no?

  Hi RegularPencils,

  I suggest that you check in the basic input/output system (BIOS), if you find an option to disable the RAID. If you find, disable the RAID and try to install Windows vista, check if it helps.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Error message when you try to install Windows Vista on a computer that contains multiple RAW hard disks: "Windows cannot find a system volume that meets its criteria for installation.

  http://support.Microsoft.com/kb/933925

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why this SSID is not visible from my laptop?

  Cisco Aironet 1200 installed on the test network. My laptop is picking the signals emitted by the 3 other access points, but not the 'TEST' one.

  Please find attached an access point running-config. Can you help me and advise please why this SSID is not visible?

  I am aware that portion of Cisco ACS/AAA configuration may have to be fine tuned as well, but whatever the configuration of my CSA I should still be able to see the SSID brodcasted in my laptop, isn't that right?

  under your SSID on the DotRadio11 0 interface, add the guest mode command. This allows the SSID be in messages so that your customer can see.

• Disseminate the Multiple SSID

  Hello

  I have an AP 1252 and I wanted to know what I need to do to set up to broadcast multiple SSID

  y at - it something I need to do on the web interface or something through CLI. Thanks in advance

  and have a great day.

  Please copy - paste the 'controllers to see the output. This will let us know if we can or we cannot broadcast multiple SSID.

  The command to enable this featute is...

  AP (config) #int dot11 0

  AP(Config-if) #mbssid

  SSID #dot11 AP (config)

  AP (ssid-config) #no - guest mode

  AP (config-ssid) #mbssid - guest mode

  SSID #dot11 AP (config)

  AP (ssid-config) #no - guest mode

  AP (config-ssid) #mbssid - guest mode

  This will do

  Concerning

  Surendra

• Multiple SSID on AIR-SAP702I-E-K9 (700 Aironet Access Point)?

  Hello community

  I wonder if it is possible to simultaneously run multiple SSID (actually 3) on a single Cisco AIR-SAP702I-E-K9, which is a standalone AccessPoint (AP). Each SSID should be linked to a different VIRTUAL LAN. Or do I need another model or even an AccessPoint driven by the controller to run multiple SSID on different VLANS to the same AP?

  Thanks in advance.

  Kind regards
  Adrian

  Hi Adrien,.

  Yes, you can have multiple ssid on the AP standalone. Each SSID must be mapped to a VLAN different.

  Kind regards

  Shubham

  Please do not forget to note positions that answered your question and mark as answer or was useful

• There is NO selection update software on my phone! How are Iphone 3 # IOS updated? It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  There is NO selection update software on my phone! How are Iphone 3 # IOS updated?

  It may not be this difficult OR the answer is "It cannot be upgraded" - which is?

  The model number you have listed is an iPhone 4, which can be upgraded to iOS 7.1.2. To have the option to update software on the phone, you need at least iOS 5, otherwise you will need to use iTunes on your computer sync to perform the upgrade.

• This cable or accessory is not certified and may not work reliably with this iPad.

  I get the following message: "this cable or accessory is not certified and may not work reliably with this iPad." Oh, and the message repeats every so often. At first, I thought maybe would it be the earbuds, but I get the message, even though no headphones are attached. I get the message when no cable is attached. This occurs even if no cable is fixed. A hypothesis as to what is happening there?

  < re-titled by host >

  These alerts can appear for several reasons: the cable is defective, damaged or may not be certified by Apple, or your device might have an accumulation of dirt or damage. Follow these steps:

  Before you try the following steps, make sure that the USB cable and your port is clean!

  1. Restart your iOS device.
  2. Try a different cable certified by Apple or a charger.
  3. Make sure you have the latest version of iOS.
  4. Contact Apple support to implement the service.

  I hope that you will charge your iPad in no time!

• What is BRetail benefits! You may not know whatever it is without being part and the computer crashes until you uninstall Mozlla!

  Pop up are on your opening page except if you join us, blocking the computer! The only way to fix it is to restart the computer and uninstall anything related to Mozilla!

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• Firefox 16.0.1 warns about closing multiple tabs but not defined options to warn

  Firefox itself upgrade just 16.0.1 version. Now, when you try to close multiple tabs, I get the warning "confirm close" even if the option "Warn me when closing multiple tabs" is not checked.
  I tried checking this option, confirming the change, then uncheck this new option & confirming 2nd change, too. This made no difference. Firefox is obedient not the setting of the option.

  The problem only occurs before the update of 16.0.1 but occurred at the first session, subsequently and has persisted since.

  Here, all this and you will be perfectly fine...
  even if the option is selected the subject: config is always set to 'true' by default (on the new version of firefox)

• Yahoo: 'Sorry, comments has not been loaded properly. things may not work. "Circle of rotation... IE works fine.

  YAHOO comment section: "sorry, comments has not been loaded properly. things may not work. "I get a radial circle of spinning - not to load the comments. Firefox 8 worked well. Help?

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Gmail said "some important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I visit Gmail using Firefox version 8.0 (running w7) I get this message: "important features may not work in this version of your browser, if you have been directed to the basic HTML version. Upgrade to a modern, like Google Chrome browser. Try the standard version in any case. "

  When I click "Try Standard Version Anyway" it works, but for some reason, Gmail is say that Firefox 8.0 is not a modern browser. Also, whenever I visit Gmail, he returned to the basic HTML version... ba.

  It seems that Google is trying to make you switch to Chrome. I would stick with Firefox, but Gmail is an important part of my browsing...

  I found the solution... browsing around, I found this link:

  http://www.Google.sh/support/forum/p/Gmail/thread?TID=627898d83a02180f & hl = in

  In type of Firefox:

  Subject: config

  Filter the results with:

  "general.useragent.

  All fields that are "BOLD" must be reset to ZERO. Do a RIGHT CLICK and RESET each field "BOLD".

  Worked on my w7 machine!