This cable or accessory is not certified and may not work reliably with this iPad.

Similar Questions

• This cable or accessory is not certified and may not work reliably with this iPhone

  Hello dear,

  Yesterday, I bought a new iphone 5 s

  I start fresh it load completely. restore the backup software and update to the latest IOS 9.2.1

  Today, when plug me the charger, I see this message

  (This cable or accessory is not certified and cannot operate reliably with this iPhone)

  I restart it and try harder to plug and unplug, but still have the same message...

  What can do me? While this charger is original it came inside the box of the iphone

  Thank you

  Check the box at the bottom of the phone where the lightning card plugs in. See if there is any dust, dirt, lint or other debris blocking the area. You can use a dry, soft toothbrush to brush the area clean and use compressed air to blow in the region. See if that helps. Otherwise, you can then take the time to bring the product if you've purchased from Apple then can check the phone or find out the return policy of the place, that you bought, and they can replace it.

• This cable or accessory is not certified popup while not connected iOS 9.3.4

  I've updated to 9.3.4 iOS on my iPhone 6 more this morning. Now, this afternoon, I get a popup every few minutes saying "this cable or accessory is not certified and may not work reliably with this iPhone." I'm not connected to a cable or accessory. Support Apple advises to do a hard reset, which I did. After a few minutes I received once again the context menu. Not plugged into anything.

  Never received that message before today. The only thing I know that has changed is the software update 9.3.4 (G 13, 35).

  Similar experiences please mark as I have this issue too. I saw another post here, a user with an iPhone 5 with this exactly the same problem.

  Kind regards

  Charles Cavanaugh

  Hi ccphd,

  I understand that you get an error that the accessory is not certified, despite not having anything that is connected to your iPhone. I know it's important to have your device works reliably, so I am pleased to provide you with tips to help with this.

  Learn the steps of troubleshooting we have for this message here:

  If your iPhone, iPad or iPod touch won't charge - Apple Support

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  Thank you for using communities of Apple Support, cheers!

• Cable or accessory is not certified, nothings connected?

  Hello

  I have an iPhone 6 display warning "this cable or accessory is not certified and may not work reliably with this iPhone." while there is nothing plugged the iPhone at all... I tried a reboot, but it continues to be, someone has seen this before?

  See you soon

  Coxie

  Hello Coxie85,

  Thank you for using communities of Apple Support.

  I see that you get an alert indicating your accessory is not supported or certified on your iPhone.  Given that nothing is connected, this is indicative of a dirty or damaged load port.  Please follow the steps below to help get this problem is resolved.

  If an alert says that your accessory is not taken care of or certified

  These alerts can appear for several reasons: your iOS device could have a port of loading dirty or damaged, your loading accessory is defective, damaged or not certified by Apple or your USB charger is not designed to load devices.

  Follow these steps:

  1. Remove all debris from the charge on the bottom of your appliance socket.
  2. Restart your iOS device.
  3. Try another USB cable or charger.
  4. Make sure you have the latest version of iOS.
  5. Contact Apple to set up the servicesupport.

  Recharge your iPhone, iPad and iPod touch

  Take care.

• My new pencil Apple gives me a "this cable or accessory is not certified...". "message.

  My new pencil Apple gives me a "this cable or accessory is not certified...". "message. It's out of the box again and I get the message when I plug my iPad Pro. Someone else with the same problem? All the patches?

  Same thing here. I talked to Apple support by chat, but they were unable to help me. I need to call and talk to an engineer, according to them. Can I just ask a replacement, as seems to be evil charge as well. It started after the update to iOS 9.2 and it is momentarily fixed by returning to a backup but simply unplug the pencil once to have the "uncertified" - message pops up again.

• Movies that I own on DVD and I tore and transfer to iTunes appear in my iTunes library on my iMac (El Capitan 10.11.2), and I can sync them with my iPad to watch there, but not in iTunes on my Macbook Air (El Capitan 10.11.2). Why? How?

  Films I own on DVD, and that I ripped and transfer them to iTunes appear in my library in iTunes on my iMac (El Capitan 10.11.2) movies and I can sync them with my iPad to watch here, but they do not appear in my library of films iTunes on my Macbook Air (El Capitan 10.11.2). Why? How can I fix it?

  I don't know why my post says 'Mac OS X (10.7.5) '. All my Macs run El Capitan 10.11.2.

• Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Install OSX 10.11.4 I do cleaning but R command will not work. With the help of USB keyboard so not wifi issues to to worry. Help?

  Would you like to share why you must do a clean install?

  You can try the recovery of the internet (which will work if your older model has been updated to enable of): hold command + Option + R until you see a progress bar (take a while). It will connect you to the Apple servers. When you see the utility window, choose disk utility to erase your disk and when you're done, choose to reinstall OS X.

  Computers that can be upgraded to use OS X Internet Recovery - Apple Support

  PS: Correction: I think not yours can be updated; in this case, you will need the original installation disks to wipe the drive and reinstall.

• Firefox version 3.6 to 11 beta does not work properly with gmail

  Gmail does not work with any version of firefox 3.6 to 11. I tried several more recent versions of firefox and they ALL DO NOT WORK CORRECTLY with GMAIL! It IS VERY FRUSTRANT and BORING! I can't click on the links or just repeat LOADING when I try to delete a message or even go in gmail settings.

  Try Firefox SafeMode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  (If you use it, switch to the default theme).

  • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  Do not choose anything at the moment, just use 'continue in safe mode.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  When find you what is causing that, please let us know. It might help others who have this problem.

• I think Firefox is getting worse, because there are many Web sites that does not work properly with it, while my other browser Google Chrome can.

  There are many sites, but I will say only 1 site because I have very bad memory, so here's the problem, Web site Furaffinity.net, search for his website may not work properly with Firefox, its advanced research, help and toggle the button description can be click but nothing happened after a click. However, my other browsers, Google Chrome and INTERNET EXPLORER horrible can work properly. I tried to fix it by resetting Firefox but it doesn't work.

  Thank you, and I take back what I said about Firefox getting worse.

• After the upgrade to Firefox 4.0, I returned to Firefox 3.6 because plug-ins, such as Media Player, would not work just with 4.0. They now work with 4.0.1?

  After the upgrade to Firefox 4.0, I returned to Firefox 3.6 because plug-ins, such as Media Player, would not work just with 4.0. They now work with 4.0.1?

  I used WMP plugin with Firefox 4 since its release.

  The problem is probably because she couldn't find the WMP plugin. One way around this problem is to install the HTML5 Extension for Windows Media Player Firefox plugin available from http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin

  This add-on will do 2 things, it will install the WMP plugin in a place that can find Firefox 4, it will also add an extension to add additional functionality for use by Windows Media Player. This extension has been reported as causing memory leaks, so I recommend that once you install the HTML5 Extension for Windows Media Player Firefox plugin, you must restart Firefox then uninstall the extension. The extension uninstaller will not remove the plugin, Firefox 4 will still be able to use it.

• Download Nikon D90 photos via a cable of Photos does not work. The picture freezes and does not matter. Any ideas?

  Download photos of Nikon D90 Photos OS El Capitan 10.11.16 cable does not work. The picture freezes and does not matter. Any ideas?

  Try with Capture of Image (in your applications folder)

  LN

• I have a number of games of cards, Word and puzzle that works well with XP but will not work on Windows 7.

  Is there a download of XP compatibility that could solve this problem?

  You can try the comaptibility mode. See: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows for the method.

  If you use Windows 7 Professional, ultimate or enterprise, you can try to use XP mode. See:
  http://windows.microsoft.com/en-US/windows7/products/features/windows-xp-mode for more details.

  If the games are 16-bit and you are running a 64 bit version of Windows 7, the games will not work unless you use an emulator.

  All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• NTLM authentication does not work well with Firefox and WebTier (11 GR 2)

  Hello
  We use authentication NTLM with Jason Straubs NTLM - Sentry feature (http://jastraub.blogspot.com/2008/03/ntlm-http-authentication-and.html) Page.
  
  With the old configuration of Apex 3.2 with HTTP-Server Oracle 10 g 2-companion-album, it works fine.
  
  Now install us a Web server with Oracle 11 GR 2 (Oracle Web Tier). I have set up the DADS. CONF in the same way as the old HTTP server. With IE, it works, but with Firefox, I get a HTTP 401 "authorization required". If I press the F5 key to reload the page in Firefox, it works.
  
  Any suggestions?
  
  Kind regards
  Mark

  Hi Mark,

  I'm sorry that I have not seen that you stayed with APEX 3.2. Therefore, it is fair to ESO who changed...

  First new idea:
  Debug information are useful as we see where Firefox gets to. The flow seems to be the same for both browsers. Perhaps the WebTier sends answers differently. I see another article that could be excluded for Firefox:

          -- See http://www.nabble.com/Empty-POST-requests-on-IE-td15332680.html
          -- We have to trick IE that he thinks the authentication fails, otherwise
          -- he doesn't send any data when issueing a POST because he wants to
          -- do the NTLM stuff again
          owa_util.status_line
            ( nstatus => 401,
              creason => 'Unauthorized',
              bclose_header => FALSE
            );
  

  The commentary says that the part is required for IE. The result for owa_util.status_line is perhaps send too early for Firefox or closed, that the 'old' OSH handled diffrently. If indeed this should be left aside for Firefox, you can try to change the code as follows

  IF WWV_Flow.get_browser_version != 'NSCP'
          THEN
          -- See http://www.nabble.com/Empty-POST-requests-on-IE-td15332680.html
          -- We have to trick IE that he thinks the authentication fails, otherwise
          -- he doesn't send any data when issueing a POST because he wants to
          -- do the NTLM stuff again
          owa_util.status_line
            ( nstatus => 401,
              creason => 'Unauthorized',
              bclose_header => FALSE
            );
  END IF;
  

  This leads me to a second point:
  I remember of this manual, you may need to update the owa_util when using the APEX in combination with OHS 11 g.
  What version of owa_util do you currently use?

  select owa_util.get_version from dual;
  

  APEX 3.2.1 comes with owa_util 10.2.0.6 which is the minimum required version. If your database currently has a lower version, you can update it out of your installation package APEX by running owainst.sql located in the owa- directory as sysdba.

  -Udo

  Published by: Udo on 31.08.2010 14:16
  Comparison of fixed

• Links from Google and long clicks does not work in Safari on iPad Air

  Safari does not open links in a new window.

  menu popup (long click on the link) does not work in safari

  "open in safari" option does not work in other applications (e.g., facebook)

  all these problems today.

  I look for iPad.

  I heard that problems can be due to a new version of iOS 9.3. But my camera has only iOS 9.2.1.

  What happened with safari?

  Unfortunately, it happens for some users with 9.2.1 as well. I think what we can do is to be patient, a solution will come.

• Output TV does not work properly with my new Satellite A100-812

  Hey everybody,
  A little, I have a problem with my new laptop if not satisfactory.
  The only thing that does not work (except some progs) in Vista is out of my tv.

  After many hours spent trawling the net, I came across different solutions, but none worked.
  The A100-812 has a geforce Go7600 who has taken TV svhs.
  First, I tried to connect to my tv through my old cinch cable. It took me 2 days before I gave up and bought a new svhs cable. Cable that works now and after a hell of a lot of attachment,

  I finally have a working tv. Except that its black and white. I used the click right-> NVIDIA Control Panel and changed the signal. I live in the Netherlands, where B/PAL is the standard. But even in trying all the different types of signals I don't get any color.

  Someone else has had this problem and solved? I downloaded the nvidia latestet drivers and I'm desperate, I bought the laptop to make it work!
  Any suggestion is more than welcome.
  See you soon,.
  Retriever

  Hello

  the problem is that the nvidia drivers are still not final. I have an A100 and desktop system and two systems have problems with tv output. It s Yes, probably a clear driver problem.
  After many surveys, I found many comments in the forum of nvidia, where users are desperate and angry about this issue.
  Thus, the only choice is to change XP up to what nvidia will release some drivers work... that s my way.

  Cheers to a disappointed user nvidia