multiple use of Camera Raw in the same session of Photoshop a Foto

Similar Questions

• Camera Raw 8 the same choice of cultures like in Lightroom and Photoshop?

  Seriously, how it would be difficult to give Camera Raw 8 the same crop choice being in Lightroom and Photoshop (for example, Fibonacci, Triangle, diagonal, etc.)? This disparity in the features is inexcusable and embarrassing. Surely, the teams to communicate?

  Curt,

  I agree with you, but alas, this is NOT the case!
  Select the CROP tool. Click and hold down to activate 'See the overlay.'

  In the CROP tool dedicated to the Photoshop application, there are options.

  In the dedicated LightRoom crop tool, there are options.

  In Camera RAW (of ANY vintage), there is ONLY the rule of thirds (which appears by default when you select Show overlay and not by name or by choice).

• Two versions of Camera Raw on the same computer?

  Hello

  I have CS5 and Camera Raw 6.7

  I have Lightroom 3.6 and I want to upgrade to Lightroom 5.

  I can't go to CS6 or CC

  I will be buying a new camera, with RAW files are not supported in Camera Raw 6.7

  If I install the camera 8 raw with Lightroom 5, I'll be able to:

  -Use Camera Raw with CS5 8

  -If not, I'll be able to have two versions of Camera raw, 6,7 and 8 on my computer and use 6.7 with CS5 and v8 with Lightroom?

  or it would be simpler just to convert RAW files to DNG format and use in CS5 and Lightroom 5?

  Thanks for the tips.

  ACR 8.x install unless you have CS6 or CC cab 6.7 remains the last word, as long as you have CS5.

  But Lightroom 5 will work fine alongside CS5. Lightroom is completely self-contained and does not rely on an external cab.

  You can send a file of 5 Lightroom to Photoshop CS5 for further editing and the final result will be the same, it will just be rendered by Lr and ACR. Full compatibility of workflow between the two, however, requires that the versions are at the stage (so both communicate and pass parameters between them, obviously not possible when these settings are not the same).

• Camera raw for the Canon G11 on Photoshop CS3

  I just got a Canon G11 and I found that the last Camera Raw can open for her raw images, but it works on CS4. I have CS3... no idea how to open my raw images?

  TNX

  You will need to download the latest version of the DNG Converter and convert your raw images to DNG (Digital negative).  Be sure to set the option to use Camera Raw 4.6 and later.  If you are using a Mac, the DNG Converter only works on files (at least that is my understanding).  On the PC, it is possible to convert individual images.  In any case, the DNG Converter is a solution.  The other solution is to upgrade to a new version of Photoshop.  Your choice.

• When sending multiple images to photoshop camera raw, no images are displayed in photoshop.

  I send multiple images in camera raw to the bridge as part of my work. I make my changes and then select them all and click on the button "open the Images. When I did earlier using Photoshop CS6, all these images open in Photoshop CS6 and be aligned at the top of the window. Now that I have Photoshop CC, when I click on the button 'open image', I'm being transferred to the CC of Photoshop, but some images are open upward. Only a few hours after I downloaded Photoshop CC, Images have been sent there by Camera Raw, but they were sent one by one. I had to finish the job on a single photo, save it, then another of the images I sent Camera RAW would show up. Now, back to Photoshop after a break of 3 hours, I can not camera raw to send images Photoshop CC. I had to go back to my Photoshop CS6 in order to continue work on my assignment. I knew that there will be some changes in CC, but do not think they would be this boring.

  Also, in order to get several images displayed in Filmstrip mode in Camera Raw, apparently I have to send via Bridge. I can't drag and drop a folder into Photoshop CC. Is there a way around this?

  Hi terryleemartin,

  If please check, is your Photoshop and Bridge are updated to the latest version.

  In addition, reset the Photoshop preferences default back so if there is no change in the settings of this problem.

  Reference: Preferences in Photoshop

  Kind regards

  Mohit

• Opening multiple .dng through Camera raw in Bridge for use in Premiere Pro?

  I was going to the coast of this video ( CINEMA DNG & FIRST PRO CS6 - YouTube ) to try and shade of color all my .dng files and then take them in first pro to put it in my calendar. Whenever I try to select all files and open them in camera raw, it gives me the notification of "". "" I can open a single file in photoshop by double clicking it and color of that medium grade but obviously I cannot do for each file in the video, and it is yet to help me with the import.

  Even trying to open a file in camera raw gives me the notification. I tried Googling the problem but they are all adapted to open it in photoshop, I can do, just can't open multiple as seen in the video.

  I'm under Bridge, Photoshop, and Premiere Pro on CC.

  Thank you very much

  If you have a bunch of images, just use Bridge / Camera Raw to color correct your images and then select all in ACR and save in any file type that you want. Then you can import them into first. Warunicorn I prefer to use ACR for correction of images, original colors because it's pretty powerful, and then if they stayed a few tweaking the color grading in first or SpeedGrade use.

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• Use Camera RAW with the Sony Nex-3

  Hey guys!

  I want to get more details on my photos.

  I'm using Adobe Photoshop CS5

  Sony NEX - 3 camera Compact (listed in the camera raw compatibility list)

  First, I changed the photo cameras to jpg in RAW format and made some photos.

  At home I tried to open the files with Camera Raw. Does not work. The sony camera recorded images as ARW file.

  So I downloaded Adobe DNG Converter. I've converted the ARW in a RAW file and opened it with camera raw.

  So far so good! I opened the FIRST photo with Photoshop. Just to test with 8 & 16-bit also. My camera supports 16-bit?

  I compared the RAW file with the jpg created again.

  Normally the quality of the raw file should be much better than the jpg compressed, I think.

  I took a quick glance at some other pictures of jpg (I shot in JPG Mode) and compared with the FIRST Images (RAW Mode).

  I have seen absolutely no difference between RAW and JPG.

  I also tried an exact correction of the tonal value at the two images.

  Even with the other image corrections. More details, noise, sharpness... even.

  With the Sony NEX-3 there was also a program included RAW that opens the ARW files.

  I do not see too many differences between RAW and jpg here.

  What I a m d INGO evil ?

  I must say that I am a beginner camera's gross. I tried for the first time. I thought it would be easier!

  The screenshot below see you an image on the left and a 16-bit DNG on the right.

  I have not found any difference!

  I would greatly appreciate your help and some good advice.

  Best regards Andi

  

  You have a lot of questions, and you will get countless different answers.

  Firstly, raw images are generally images 12 or 14 bits.  Your camera doesn't have to support that, because it's one of the benefits of shooting in raw.  Camera Raw opens the images in a 16-bit workspace.  Due to the additional bits and other factors as well, you're able to do a lot more with images.  If you have deep and strong or extremely brilliant shadows highlights overexposed, you will find that you can recover a lot more detail in these troubled when areas you work with raw image data.  The fact is that if you have perfectly exposed image and you're not overexposed areas or mitigate the shadows, it will be difficult to see the difference.

  If you really are not a bad thing.  You must do some experiments more and some studies to better understand yourself the advantage for the filming of raw images.  If you're like most people who contribute here, once you realize you has all the benefits of shooting raw images, you will probably stop shooting JPEG in total.

• To connect to vCenter using the same Session with PowerCLI

  Hi all

  Is it possible that we can establish multiple connections to vCenter using the same session with Powercli.

  As connect-viserver-Server "vcenter1" - domain\domainacnt of the username-password "Password".

  is to establish several connections and we want to limit, because we are in the process of report generation based on the web developing using Powercli with IIS.

  Please suggest.

  You can use the Session parameter on the cmdlet Connect-VIServer .

  I use this for the PowerShell Workflows, see workflow of PowerShell and PowerCLI

• Camera RAW with the new computer?

  New computer with Win 8.1... I use Photoshop CS5 and I have a Canon EOS600D. Please can you tell me what DNG Converter I should download. Also it will combine with PS automatically or I will introduce in plugins for example?	LEA

  In fact, you should be able to use the camera raw 6.7 (plugin) in photoshop cs5, which is expected to open these files in photoshop cs5.

  Camera Raw plugin | Supported devices

  Applications of camera Raw compatible Adobe

  If in photoshop cs5, you go to help > about plug-in and click on the words of Camera Raw, which version would you say?

  If it is a version number less than 6.7, you get the update to camera raw 6.7 from here:

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Camera Raw 6.7.1 update

  You can also try help > updates inside, photoshop cs5, but that may not work.

• How to use headphones and speakers at the same time

  I want to use headphones at the same time that I use the speakers.

  I am hard of hearing and need the LOUD volume. When others are watching a film, projected on HDTV, they won't let me turn the volume up to where I need it, which is why, headphones and speakers at the same time.

  I use Windows 7, I want to stick with Windows 7, so I want a Windows 7 solution.

  If there is no solution for Windows 7 and there is a solution using Windows 10, then and then only, I will be upgrading to Windows 10.

  Using headphones and speakers was possible under Windows XP. I think that a kid at Microsoft, with a regular audience, thought this feature was redundant and removed. Large.

  Macs will play through the headphones and speakers, so maybe it's time to buy a Mac!

  Hi Bob,

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you want to use headphones and speakers at the same time on your Windows 7 computer. I will certainly help you get this fixed number.

  I suggest you check the suggestions contained in below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/headphones-speakers-at-the-same-time/7ed31bcf-3762-430D-9c9f-e6967d670d0e

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• use two different characters in the same domain

  Hi, how to use for different fonts in the same field?

  unless "crush you" painting: you do not have.
  If you do, you can use graphics.setFont

• During the installation of camera Raw 9.1 (Mac, with CS6) Photoshop seems to only show Camera Raw version 8.7 even though it said installation was successful?

  Hello: anyone can tell me why when I install Camera Raw 9.1 (Mac, with CS6) Photoshop seems to only show Camera Raw version 8.7 even though it said installation was successful?

  Bruce - thanks. I'm not sure you've seen this, but I looked on the "Update" menu on my laptop and updated the application manager. Who did the trick. I opened the Camera Raw 9.1 download successfully and it was installing on my hard drive, but without the CS 6 update, it was not to find the right place to go. This issue is now resolved, and updated the latest watch information box.

  Thank you!

  Craig

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• Images uploaded by share subscription can be used by a company in the same division?

  Images uploaded by share subscription can be used by a company in the same division? If I alter the image or do not change it? They will not change it, just posting on a blog or other social media.

  Yes, provided that they fall within the license agreement.

  http://wwwimages.Adobe.com/content/dam/Adobe/en/legal/servicetou/Adobe_Stock_Terms_en_US-2 0150313_hpc.pdf