MUSE lost BC publication settings after update to 2015.2

Similar Questions

• I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me!)

  I lost my bootcamp partition after update to El Capitan (solitary method T did not work for me: () is lost forever?)

  I can't access my files or the partition from the finder

  My bootcamp partition size is 380 GB.

  This is all the information on the situation:

  sudo TPG - r - vv show disk0

  

  sudo fdisk/dev/disk0

  

  diskutil list

  

  sudo-l/dev/disk0 Gdisk

  

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  

  Sudo gdisk/dev/rdisk0

  

  in IPARTITION

  

  My bootcamp partition is referred to as a free space

  in the finder

  

  Thanks a lot for your help!

  How do you have a 100 MB NTFS file system and free space after the partition of 100 MB. You have a MSR (100 MB), but your windows are the current MSD.

  SIP is activated. Your MBR has no bootable entry, because it is not marked. Please describe in detail what steps were tried.

  What is the year/model of your Mac?

• bug in settings after update 4.2.2

  Hello guys, I have a bug in my Xperia L in the settings after update to Android 4.2.2
  The problem is in storage that I can't transfer data to the sd card. When I click it, it crashes with a message "Unfortunately the parameters have stopped."
  Any idea about it?

  arbz wrote:
  Hello guys, I have a bug in my Xperia L in the settings after update to Android 4.2.2
  The problem is in storage that I can't transfer data to the sd card. When I click it, it crashes with a message "Unfortunately the parameters have stopped."
  Any idea about it?

  Known issue.

  wait fix sony selection until this problem.

• Cannot import AVCHD file in Premiere Pro after update to 2015.3

  After updating to 2015.3 this morning I can no longer import the files into AVCHD folder, the program just guard locking up and I'll get the RESPONSE message is NOT in the import window. I'm on a Windows 7 computer.

  Hello

  Turn off 'Enable accelerated h.264 decoding (reboot required) Intel' last show point below in Edit > Preferences.

  

  Vinay

• Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  Photoshop does not start after update CC 2015 and I can't install new applications... What can I do?

  If you leave CC 2015 Installer remove older versions of Photoshop you can re - install older versions using the creative Cloud Desktop application or through direct downloads, you can install.

  Direct download links of Adobe CC 2014: 2014 creative cloud release | ProDesignTools

  Download new Adobe CC trials: direct links (no Assistant Manager) | ProDesignTools

  Download Creative Suite 6 applications

• Problem download after effects CC 2014 after update to 2015 CC

  So I just tried to open AE CC 2014. But it does not open. So I searched online help and someone said that I had to update. I've updated to 2015 for CC and then CC 2014 uninstalled. I discovered how to redownload CC 2014, but the tutorial didn't help. When I press "View previous Versions", it shows only Edge animate CC and Gaming SDK. So now, it tells me that I have to buy the 2015 version again even if I already bought the 2014 version. + I have another problem. When I open CC 2015 it stops on the loading screen and does not open.

  I discovered that I just had to restart my pc. Then when I tried to press "View previous versions" that has worked! You should try that.

• Personal settings after update!

  I have Vista Business and have recently installed upgrading lasted, and after I restarted my calculated the new home screen showed all my personal settings have been reset. No file disappeared however, but this is a major drawback for me.

  Hi Kobe24,

  Please provide us with more information about the parameters that are lost and the update that was installed that might have caused the problem.

  With the information we have so far, the only option we have is to perform a system restore or you can reset the settings manually.

  To restore the operating system to an earlier point in time, follow these steps:

  1. click on start toreduce this includes this image, type System Restore in the Search box, and then click System Restore in the programs list. Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type your password or click continue.

  2. in the System Restore dialog box, click choose a different restore point, and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on Finish.

  .
  Please let us know if it helps.

  Thank you and best regards,
  David

• Lost all calendar entry after update of Skype Windows Live Mail

  A few days passed I updated Skype and had to reset my password in my Windows Live Mail a/c and have now discovered that I lost all my info, I walked into my calendar. This can be restored?

  Judy Hello,

  Thanks for posting your query on the Microsoft Community.

  With the publication of the description, I understand, after you reset the password for your Windows Live Mail, you've lost all calendar entries on your Windows 7 computer. I will definitely help you to solve this problem.

  I suggest you refer to the suggestions of Linney responded on November 1st, 2009 in below mentioned thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-Live-Calendar-missing-from-Windows-7/e734c677-c1fd-415b-90dB-c2c4691b57fc

  In addition to the above, if you use Office Outlook, and then you can read the Microsoft article mentioned below:

  Invitations from meeting or go missing or are deleted when you view your calendar items in Outlook

  https://support.Microsoft.com/en-us/KB/2515263

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• WRT160N... password does not work to get back in line to restore settings after update firmware.

  The reason for the update of the firmware has been that the router would constantly disconnect, even if the ISP has been connected.  I was hoping that would solve the problem.

  Failed to connect to router just after the firmware has been updated successfully (what said on the screen), but could not use "continue" to to precede.

  Because the screen indicates the success, I closed the browser and reset the default router.

  The next step in the process is to access the configuration page of the router web-based and restore my settings.

  The PROBLEM... Now my password does not work to allow me access to the page of the router's web-based Setup to restore the settings.

  I have an account, but nowhere in the account he mentions the password settings.

  When you reset the default router, the router returns to a cache of user name and a password of 'admin' (without the quotes).  Please try to connect to your router.

  If you continue to have problems, then you must try to reset the router by default.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) connect a computer cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

  If you need additional assistance, please indicate your ISP, the make and model of your modem, the firmware version of your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

  Please let me know how things turn out for you.

• Icon lost bbm blackBerry Smartphones after update 6.1.0.71

  Hi, first of all, I am new to blackberry, then so not know much about them, I bought my 9800 on network o2 uk a few weeks ago, until this morning everything was fine, when I updated messenger blackberry to v.6.1.0.71, once rebooted I had lost my bbm icon, is showing as installed in the application manager , I've deleted and reinstalled several times without success, please could someone help me to recover my bbm?

  Thanks in advance, lee

  Thank you for your help, I tried to delete - reboot - reinstall nothing helped, I finished restoring the factory settings, and then software update operating system via the Desktop Manager before you attempt to upgrade from bbm, all now works well again...
  Thanks again, lee

• Changing the unexpected settings after update

  HI - George here in Rhode Island.

  I have Windows 7 Ultimate 64 bit and whenever I do a "reboot" or (I think) an update causes a reboot; my 'games' (hearts + Spider Solitaire) revert to the default settings. The "Display-bubble" option is checked and all the names of the other players return to the "North-South and West. No other user profile settings are changed.

  I know that this is a trivial question, but it's driving me crazy! I found a reference to this line that suggested Roxio Creator may be the cause, but removal of Roxio did not fix the issue. I tried to reinstall the operating system without success. The only thing I found which may relate is an error in Event Viewer

  -
  -

  7000

  0

  2

  0

  0

  0 x 8080000000000000

  27991

  System

  GW - PC

  -

  SessionLauncher

  %%d Ko

  Links on the error '0 x 8080000000000000' do not seem to help.

  Any help or information would be appreciated.

  Thank you

  Hello
  Method 1:
  Perform the clean boot and check.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See the section step 7 above to start the computer by using normal startup after you have performed the steps in troubleshooting.
  Method 2:
  Method 2:
  Scan a file system (CFS) checker on your computer and see if that fixes the problem.
  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  
  http://support.Microsoft.com/kb/929833
  Method 3:
  I suggest to create a new user account and see if the problem still occurs, follow the link:
  Step 1: Create a new user account.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2: If the problem does not persist in the new user account, try and fix the damaged user account following the link:

  Difficulty of a damaged user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
  
  

  I hope this helps.

• My Muse site gives an error message active resampling after update February 2015...

  My Muse site is to give an active error resampling after February 2015 updated... but there are no icons stand to show what are the images themselves were the problem within the palette. This problem occurred after this most recent update of Muse (2/2015). I seem to also receive this "re-active link" error when I opened my Muse site on another computer in the location of shared file? I do not change my images/assets at all, but I get this error message. If anyone can help please, I can't find an answer to my problem that solves the problem. Thank you!

  Please update to the latest version of Muse.

  Thank you

  Sanjit

• Restore font settings after update to Firefox on Ubuntu 14.04 35.0.1

  After the update to 35.0.1, Firefox fonts became superthin and very uncompfortable.
  I attach a screenshot comparison 31.2 IceCat. The fonts used are clearly the same, I see that in
  GIMP while zooming. And the strategy of smoothing is similar, but Firefox fonts ends more lightweight and thinner.
  How can I go back to the old setting police?

  Turns out it was the freetype-infinality that I installed there is finally the move in 2 weeks. Removing it solved the problem.

• Lost near publication settings file

  Hello

  Recently, I added the AIR SDK Flash Pro CC 3.8.0.1350.

  When I close a file, then open it again, look in the properties panel > publish pane, the target property came back for the "Flash Player 11.7.

  Also, when I click the next key you Script drop-down list, all my Source path references have been lost.

  Is there any solution for this?

  See you soon

  Ben

  Weird!

  Just made it similar to the above with a new FLA + Doc class. Worked fine at the moment.

  So, I saved my FLA problem under a different name, closed and then opened it - everything was recorded.

  So I did and then come back to the original, closed, reopened, and now it works very well also!

  Didn't need to clear the settings or the other!

  Thank you for your time sinious!

• publication settings, how update you flashplayer target

  I'm updating the flash player 17 but can only export to 16

  

  Someday soon (someone I know suggested that it would be today), Flash Pro will support beyond 16. But the Flash Pro team does support not versions beta, they will have to wait for the final version and then take some time to integrate this release version. If, hypothetically, a new Flash Pro is released in the near future, it would probably still be at Flash Player 17 because 18 only went live a couple of days.