Driver not intended for this platform

Similar Questions

• Satellite L30-114: driver not designed for this platform when installing IDE controller

  Hello! I have the satellite L30-114, I bought months ago. I have Win XP SP2 with all updates and the bios 2.3.

  A few days ago, I tried to reinstall the drivers for the ide controllers. I have delited in "Device Manager" and restart the system. After you start windows normally are both installed PCI - IDE controllers, then find ide channels (primary and secondary ide channal on ich) and the strange thing happens here: instead of the normal installation of these 4 channels, window "driver not intended for this platform". and after each reboot those devices Installing, to give me 4 windows "driver not intended for this platform".

  Now in Device Manager, I have 2 controllers IDE standard normal, and not 4 channel IDE working with yelow «!» The funny thing is that I not install new ide drivers. Drivers are the same who worked before reinstalling. Now the computer works, but is worth than before. on the toshiba site there is no driver Ide "planned for this platform.

  Anyone know how can I solve this problem? or where is located this driver? or what chipset whith this controller model in this notebook?

  Hello

  In my opinion, there is no reason to do something like that. If the laptop works well let it go. Go to the Toshiba download page and download driver chipset for your laptop model and install it manually.

• Driver is not intended for this platform (install the latest driver for Verizon Wireless WAN (UNDP))

  Hello

  My Verizon Wireless WAN has worked on my T500 (2081CT 0, 4 GB of RAM, Windows Vista Business 64) since I received it last September. This morning it stopped working. Said that the card has not been activated. Ask Verizon and Lenovo have been pretty useless - each blamed the other, I so put on my own.

  -I uninstalled the driver for the Qualcomm HS USB card integrated, downloaded the latest version of the driver (transferred via CDROM since I can't connect to this laptop to the network where I work) and tried to install it. The HS-USB card is now displayed in the devices as "Unknown device" Manager (under 'other devices'), and his device status is:

  "The drivers for this device are not installed. (Code 28)

  Driver is not intended for this platform.

  To reinstall the drivers for this device, click on reinstall the driver. »

  Huh?

  Of course, reinstall driver does not work, the first problem is that he can't find online because I don't have internet connection without the card.  This driver has been installed from the following link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69999

  Seems to me that it should work on this machine. What I am doing wrong?

  -Some additional background: I've had several accidents recently, including at least two yesterday with blue screens. Easy to believe something has become corrupted, that's why I tried to uninstall and reinstall the driver.

  Help!

  Thank you very much.

  Solution was to uninstall the 'unknown device', search for new hardware and follow the promts by selecting all default values.

• Mouse - "driver is not intended for this platform" laser help?

  I have a Lenovo wired laser mouse that I got when I got my SL500, and it worked fine on it, but I recently put in a new hard drive and install Vista Business 64-bit and then well hell at work.

  Now that I'm gone, I started to install software and devices, well, mister mouse drivers and Vista 64-bit agree, and I get this wonderful message indicated in the title of the topic. I tried to download the software lasted and the mouse drivers cause also, I tried the CD first.

  What should I do now? Try the mouse drivers bluetooth or something prehaps? Try to install it as a PS/2 device?

  Good thing I really like my TrackPoint, if not I would be quite upset.

  Edit: I figured it, I uninstalled Ultranav, installed the mouse, then installed Ultranav again. It's pretty weird that is not only the work, or that it isn't some kind of alert. (I also turned off avast! and steam, so it could be them, but I doubt it)

  Marked as resolved - see Edit at the bottom of the post from Xeogin above ^.

• Printer error ' ' the installed print head is not intended for this printer or is damaged.

  Original title: printer does not print

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  I have a hp photosmart B110a all-in-one printer and the following warning came on the screen. "the installed print head is not intended for this printer or is damaged" useless to Sam the printer now does not work. can someone advise on how to remedy the situation. Thank you

  Hello

  You will need to contact the HP Support for this hardware problem.

  HP drivers & support | United States:
  http://WWW8.HP.com/us/en/support-drivers.html

  You can also check on the Forums of HP Support for other users who may have solved that problem.

  HP - HP Support Forum Support Forum:
  http://h30434.www3.HP.com/PSG/

  Concerning

• Download the file from the TFTP and get this error "this image is not valid for this platform.

  Hi guys

  You try to download a new IOS for my CISCO ASA using TFTP I get the following error

  Access tftp://189.206.211.24/asa825-33-k8.bin...!

  % Error copy tftp://189.206.211.24/asa825-33-k8.bin (this image is not valid for this platform)

  -Anyone has the same error.

  Also, I have tryied using the ASDM but I get the same error.

  Kind regards.

  Hello

  As says the Description This is not for model ASA5580.

  Click on the link connected with your account

  http://software.Cisco.com/download/type.html?mdfid=281191384&flowid=4378

  Then choose the software Adaptive Security Appliance (ASA)

  Then navigate through the drop-down list on the left

  Provisional-> 8-> 8.2.5 interim

  And you will get the visibility (click to enlarge)

  

  -Jouni

• HP 2300 error "cartridge not intended for this printer.

  Hello

  I recently completed a 94 black ink cartridge and when I installed it, a message appeared: "black cartridge inserted now is not intended for use in this printer."  First and only time I had a reflilled of the cartridge.  How to operate?

  Sounds like a user related error message. Unfortunately, some machines can detect if the cartridge has been tampered with or reused. For various reasons, reload a cartridge is not recommended because it may harm your machine. This error message indicates that the power connection is damaged, and probably the error will remain until a new cartridge is bought to replace the old.

  I assure you that although the reloaded cartridges work much of the time, they have a failure rate much higer and the factors that can affect the mechanics of the machine at all times.

  I would like to know if this is the information that you need!

  -Spencer

  PS have a great weeekend!

• Error message - cartridge in the slot on the left is not intended for this printer

  HP Photosmart C5280 All-in-one has been arrested and brought to the college for the summer.  Now, the error message above is displayed.  The 75 cartridge is correct and a real HP that worked previously.  Removed and reinstalled the cartridge, turned off and restarted the printer, removed, cleaned and reinstalled the cartridge without success.

  What is a printer or cartridge problem?

  The only thing that worked (finally) is the semi full Reset.  Thank you!!!

• HELP to the installed print head is not intended for use this product, or it may be damaged

  Help - please, I get a msg that says: "the installed print head is not intended for use in this product, or it may be damaged. I was trying many solutions I found on my search but nothing doesn't work.

  I was able to find the right answer to the problem I had with my printer. The printer that I have by the way is a HP Officejet 6500 E709a model.

  Here is the solution is simple:

  The print head is the device where sit the ink cartridges.  It may be incorrectly installed.

   

  Remove the ink cartridges (carefully, you can get ink on yourself).  Now using the system of grey lock on the right side of the cart, remove and re - install the print head.  Shake a little before lowering the lock wall.

   

  Now, re - install the ink cartridges.

  
  I had to do this process 2 times because the first time did not work. Make sure that when you remove the print head, the area is clean, try to remove the very careful, a little dust and I hope it will work for you also.

• The model name of my DM9601 To Fast Ethernet adapt is DM9601 to Fast Ethernet Adapterhas has stopped working correctly because a compatible driver is not available for this version of Windows.

  has stopped working properly because a compatible driver is not available for this version of Windows.  This is the error I get and it made my computer unable to re boot. Please help me how to set right.

  Thank youy

  Hello

  you left in the name of material on

  DM9601 USB to Fast Ethernet card; fix?

  and sorry, but I cannot find a driver for him after XP

  you are also posting in the wrong forum

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

  or contact the hardware manufacturer

  they write drivers for their products, not from microsoft

  ______________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• "cartridge in the right location is not intended for use in this printer"

  The printer monitor displays the message "cartridge in the slot on the right is not intended for use in this printer." We have not changed or replaced the cartridge. This is the original cartridge, and is not ink. The printer has worked the last time I tried to print, and I tried to remove and replace the cartridge in as well as restart the printer.

  I suggest that you call the HP Technical Support agents can do the necessary troubleshooting and replace the cartridge or the printer if it is faulty. Also, try to install a new cartridge and see if it works. This will help narrow down the problem to the printer or cartridge.

• I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

  I started the OS from a backup hard drive. Now My Adobe products does not work. "licensing does not work for this product" error code 150:30. Help me please!

  Reinstall the software correctly. Migration / backups do not work due to the specific requirements of the activation system.

  Mylenium

• I have Firefox 5.0.1 and a theme I want download says it works with Firefox 4.0b9pre - 7.0a1, but at the top, he says that he is not available for my platform. What should I do?

  I just downloaded Firefox 5.0.1 and one of the themes I want to download and try says it works with Firefox 4.0b9pre - 7.0a1. Upstairs, however, it is said that the theme is not available for my platform. He arrived with a few other themes as well, but I didn't check what versions they work with. I don't know what this means or what to do about it. The theme is at this link: https://addons.mozilla.org/z/en-US/firefox/addon/bloomind-ft-deepdark-2/

  It is said:

  'Bloomind FT DeepDark 2' is a theme that was created to transform the look of Firefox 4 for Windows users. It was specially designed for the seven, but the rendering is quite specific on XP and Linux (I can t test on MAC, but for those who would like to try on this platform, you can force the download and install it).

  So try to save this file using the context menu.

  • http://KB.mozillazine.org/themes

• DMA between host and target FPGA is not supported for this remote system.

  I try to cover with my FPGA (on the cRIO-9002) of the RTO.  I have install upward of anOpen good VI reference without error, but as soon I try to access thefifo I error-63001 and the attached message wrote:

  Error-63001 occurredat reference FPGA VI opened in the target - multi rate - variables - fileIO_old.vi

  Possible reasons:

  NOR-RIO FPGACommunications framework: (Hex 0xFFFF09E7) DMA from the host to the FPGA targetis not supported for this remote system. Another method for controller of e/s or climatiqueLes associated with the FPGA target.

  What other I/O optionsdo I need to move the data asynchronously to the RTO for the FPGA. I have triedcreating memory, but it seems that I can't write to the memory of the RTOSside.

  We have also a 9012sitting around will using this cRIO rather solve this problem.

  I'm very very greenwhen it comes to LabView, so I apologize if this is an easy question.

  As stated in the readme of the driver NOR-RIO, DMA is not taken in charge from the host to the FPGA on the cRIO-900 x series. The cRIO-901 x supports DMA transfers between host and FPGA and FPGA to host all the cRIO-900 x series controllers only support transfers the FPGA host DMA. As a result, LabVIEW returns an error if you try to transfer using DMA controller for cRIO-900 x.

  The 9012 looks like the ideal solution, you are very lucky to have additional hardware laying around

• Pavilion a010dx x 360: update not validated for this computer

  Whenever I hit find my product and install a graphics driver for the pc detected, the finished download it is not validated for this computer.

  Johan1031 wrote:
  How can I change factory OS? If not, how am I supposed to update my drivers

  HP computers - get HP recovery disks or HP USB recovery disc
  Read this before ordering your recovery discs! (United States and Canada only)
  HP computers - performing a recovery of HP (Windows 8) system
  HP computers - using the Microsoft System Restore (Windows, 10, 8)