Music and sounds spoken turns on there is not a program open to cause this. Impossible to turn off

Similar Questions

• Music and sounds are coming through too fast and too sharp.

  Music and sounds are coming in my treble speakers too much and too fast. Looks like Alvin and the chipmunks. It happens on all sounds from a CD or the Internet. All diagnostics check out OK. It's Windows XP. Any ideas how to adjust the sound quality?

  Hello Jcbrewer,

  Thank you for your message.  Take a look at the information below which I copied from http://www.microsoft.com/windows/windowsmedia/knowledgecenter/mediaadvice/0067.mspx.
  Why my music sounds like chipmunks sing?

  Don't worry, little domestic rodents in Windows Media Player is not configured. Instead, the clock of your soundcard probably has a timing problem. To resolve this issue, try to reduce the level of hardware acceleration for your sound card by following these steps:

  1.	In Control Panel, open sounds and Audio devices.
  2.	In the Volume , in the settings area of the speaker tab, click the Advanced button.
  3.	In the Advanced Audio properties dialog box, click the performance tab and adjust the hardware acceleration slider to adjust the calendar clock for your sound card.

  Remember that, if your sound card supports multi-channel (5.1) audio playback, turn off hardware acceleration (moving the cursor of None) will cause the sound card to play all the audio multichannel stereo (two speakers).

  If you can't solve the problem by adjusting hardware acceleration, you can check with the computer manufacturer for an updated audio driver.

  Another possibility is that it could be a joke any.  You can perform a clean boot that will start the computer without programs 3rd party.  The steps are below:

  1. Click Startand then click run.
  2. Type msconfig in the Open box, and then click OK.
  3. On the general tab, click Selective startup.
  4. Under Selective startup, clear the following check boxes:
     • SYSTEM process. INI file
     • Process of VICTORY. INI file
     • Load Startup items
  5. Click the Services tab, select the hide all Microsoft Services check box, and then click disable all.
  6. Click OK.
  7. When you are prompted, click restart.
  8. After the computer starts, start the program or game and see if the problem is resolved.

  If the problem is resolved, you can check in Add/Remove programs to see if there are any suspicious software that needs to be removed.  You can also check your startup programs in MSCONFIG.  To access msconfig, click on 'Start' > select "Run" > Type msconfig in the box and click on enter.  You will see the Startup tab, you can check all suspicious programs start at startup and remove them.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• No voice in the audio, only music and sound effects - while playing the movie in Media Player

  Original title: Media Player

  I get everything on trailers, but when I get to the movie there is no audio voice only music and sound effects, how can I fix it's on media player and centre

  Possible solution:

  After spending the afternoon to tackle this (troubleshooting, downloads driver updates, etc.) I just found out that my subwoofer cable is bad!  If I raise to create a good connection, the sound is fine... until I can replace it.  Then you can try it.  :)

• I just updated my ios to 9.3 and I would turn off the 6-digit password that he continues to ask me. When I go into settings/general there is no disable password? How can I do this

  I just updated my ios to 9.3 and I would turn off the 6-digit password that he continues to ask me. When I go into settings/general there is no disable password? How can I do this

  Go to settings > Touch ID and password > disable password.

• Equium A20 fell and the screen turns off always

  Hi, I was using my satellite A20 long (4 years). Never had any problems. Recently he fell and the screen turns off always.

  I can see the toshiba logo and the windows logo also when starting, and even I can enter the BIOS and change the boot order too... but as soon as windows load screen is black. I don't understand

  Anyone with the solution?

  Thanks in advance...

  Hello

  > but as soon as windows load screen is black. I can t understand
  This means that the display output has accidentally changed to an external.

  Have you checked if something would be visible on the second external monitor?
  Select this check box.

  In addition I advise to use the FN + F5 keys to check if you can switch the output back to the internal display.

• How to disable automatic closing in windows 7, I leave my computer download to ngiht and it it turns off

  How to disable automatic closing in windows 7, I leave my computer download to ngiht and it it turns off

  Hello Yugo123!

  Thanks for writing on the Microsoft forums.

  This problem is due to the power plan that you use or the default settings. That's what you have to do.

  How to change the power Plan settings in Windows 7

  Just look at the options where he is asked about to turn off the display device & hard. Simply change their return on the '' NEVER. ''

  That's all. I hope this helps.

  
  

  Anurag Shukla
  Microsoft Certified Professional

  Please click on the check mark as answered check on this Page if this post solves your problem, because it helps people who need quick access to answers.

• I would like to have my account for photoshop elements 9 off, because I changed my computer and didn t turn off it until I removed it.

  I would like to have my account for photoshop elements 9 off, because I changed my computer and didn t turn off it until I removed it. Can I do it myself or someone has to help me?

  Moving to download, installation, setting up

  Hello

  Learn how to enable or disable Adobe applications refer

  Hope that helps!

  Kind regards

  Sheena

• I have upgraded to Windows 10 and forgot to turn off the previous applications.

  I have upgraded to Windows 10 and forgot to turn off the previous applications. How can I disable all applications that are enabled in the creative cloud first?

  Hi,

  Please see enable and disable Adobe products

  Hope that helps!

  Kind regards

  Sheena

• Hard drive receiving "there is not enough space available to complete this operation" in Windows 7

  Hello, I have install windows 7 upgrade from windows xp. My total hard drive is 500GB.but after installing windows 7, it shows 150 GB of disk space is not allocated. I tried disc managemaent IE right click on "Unallocated disk 150 GB" then volume.then simple new format then on next-next and then finish... and it displays error   "there is not enough space available to complete this operation".n haa, I did a system restore in windows xp. Since the pc went slowly & with money problems... But it does not work.

  Therefore, I installed windows 7 holding the pc faster. I think the restoration of the system to occupy this disk 150 GB space.so is show unallocated.

  Please, be sure to this my problem. Tell me how to keep back my total 500 GB... Give me an appropriate solution.   I will thanxful to you.

  Kind regards

  Pranjal

  * original title - 150 GB hard drive is unallocated.showing "there not enough space available to complete this operation" _ *.

  Hi pranjal1,

  Please see article with other useful information:

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• There is not enough disk space to save this theme in your computer

  I am UNABLE to record ANY theme in my computer for sharing! everytime I try I get the following error "there is not enough disk space to save this theme on your computer! but I have MORE than 50 GB free! even record on my drive hard 2 TB results in the SAME error! No MATTER how big or small the theme is, the result is that EVERY TIME the error! and google has NOTHING when I searched it!

  Hello

  It seems that you are unable to record the themes, you get the error: "there is not enough disk space to save this theme on your computer.

  Here are a few troubleshooting steps that you can try to solve this problem.

  Method 1: We will perform disk clean and check if the problem persists.

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-in/Windows7/delete-files-using-disk-cleanup

  Method 2: Connect to the different user account and check if you can save the theme.

  If it works fine in another user account, then the current account may be corrupted.

  
  

  See this link to create a new user account and then copy files and settings old user profile to the new user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Music and sounds of the game won't play; all other sounds work

  I have an iPod 5th generation touch. I checked my volume and the volume of ringtone and leaves. All the sounds are turned on. I checked for if sure speaker working, (it does because the music plays and keypad lock and sounds of device clicks), and I checked in game controllers and all sense I could think of to make sure sounds is enabled. I check everywhere he looks good, but the sounds of the game will not play AGAIN. I'm starting to think that maybe it's a problem of material with my iPod touch 5g because I also have a 6g-key and everything works on it just. Does anyone have any ideas if I could solve this problem?

  Try:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset all settings

  Go to settings > general > Reset and tap reset all settings.

  All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.

  -Restore from backup. See:

  Restore your device from an iCloud or iTunes backup - Apple Support

  https://support.Apple.com/en-us/HT204184

  -Restore factory settings/new iOS device.

  If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

  https://www.Apple.com/retail/Geniusbar/

• Where can I find free background music and sound effects?

  Hello out there.

  Like many editors amateurs looking for a site to download for free instrumental return music for my projects.

  I'm looking for acoustic guitar, drum-n-bass and also some sound effects.

  If you used or you know of any sites please let me know.

  I begin a project, is nothing that I need quickly.

  I do not add any music to the last.

  So I mustn't keep repositioning it on the time line I do edits and cuts.

  I appreciate any guidance.

  Jim

  Try a search on Google.

  Something decent, you're most likely going to have to pay. Studio Cutz site has a huge amount of music, sound effects and short intros, you can listen. Not free though.

  We have a collection of CD of Studio Cutz at work use us from time to time. The quality is above average for this type of product and the price is reasonable for what you get.

• Crack speakers and buzz only with online video. In charge of the music and sound of the DVD fine

  I have a HP 15-r011dx laptop with windows 8.1 when on youtube or videos CNN, the speakers carack and pop. The ads CNN play before the story are very good as a DVD or my music loaded. I relly don't want to reinstall. I've had the computer for 3 weeks and I don't know if she was there from the beginning. I have updated all of HP, including the BIOS and tried another browser and adjusted the volume levels. Windows has made updates.

  Hello

  I have some other ideas, but it becomes more an environmental issue. Something (I couldn't say what) is causing interference with the audio. As this occurs only with online video/music and not anything ran computer laptop or DVD directly, this indicates that it would be something to do with the Internet.

  There might be questions about Internet bad signals via wireless or bad connections to Web sites. You have problems with streaming?

  You can also try to connect to your network with an Ethernet cable, to test. The question is perhaps more wireless streaming. Again, this could indicate some sort of interference.
  You can also test your router with the nearby. If you notice the problem disappears in some places but is apparent or worse in others. Check to see what's around, other devices may cause the buzz.

  Have you noticed problems in streaming video and audio on other capable network devices (iPhone, Desktop, etc.).

  The last possibility, again it goes back to poor/bad Internet could be the router itself. If it is older, then it might 'go. '

  I know nothing of the above are direct troubleshooting suggestions for the laptop, but two doing exactly the same thing is very rare. More often then not it is and indication that "something else" happening. The idea and the tests above could help determine what exactly will.

  I would like to know how it all happens.
  Thank you.

• Doesn't have installation of Vista updates. He continues to try set up the third update with 0% completion and then it turns off and start again from the beginning. Keep in the loop... Help! There is no error message.

  As above. He is not in windows more simply the third update installation and then turns off computer and restart new since the beginning. Tried running safe mode but without success

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:
  

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• When I run an analysis complete, there is a 'ultrww.cab' file and the computer turns off. McAfee said to contact Microsoft technical support on this subject

  When you run a full scan by McAfee, my computer comes in a file named "ultrWW.cab" and turns off.

  McAfee said to contact Microsoft technical support on this subject

  What a lame excuse.

  Make an indication where ultrWW.cab?  See this thread on a similar problem with Kaspersky AntiVirus: http://forum.kaspersky.com/index.php?showtopic=80688

  If the file that causes the problem is in a subdirectory of C:\MSOCache, you can remove the entire C:\MSOCache and all its subdirectories, but use disk cleanup (start > run > cleanmgr > OK) to do.  Read both of these items first:
  http://ask-Leo.com/whats_msocache.html
  http://support.Microsoft.com/?kbid=825933