Client RDP stopped working in XP - Service Pack 3

Similar Questions

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• Never managed to get Windows Search to work in XP Service Pack 3, but the Research Assistant works very well.

  Original title: Windows Search

  I've never managed to get Windows Search to work in XP Service Pack 3, but the Search Wizard works fine.  I tried to index the C: drive.  I clicked on 'Rebuild' under Indexiing Options.  The c: drive shows in Indexing Options, excluding some unnecessary subdirectories.  It's all buzzing around for awhile and then says "0 indexed items" and "complete indexing.   I use Norton Internet Security.  What I am doing wrong?

  Hi Victorvan,

  You can uninstall the Search Assistant and check if it helps.

  Check out the following link to uninstall the program:

  How to change or remove a program in Windows XP

• can not get netframe work 3.5 service pack 1 to install always get an error code ox643

  I have a hp windows xp x 86(32 bit) media center 2005, I tried for about 3 to 4 weeks to get to dragon speaking naturally premium to install on the computer > it will not install because it says I have to install netframe work 3.5 SP1 in order so that he can install it. . When I try to install the netframe 3.5 I get a code error message 0 x 643. Is it possible to get the netframe work 3.5 service pack 1 to install when the netframe who entered the computer is part of the operating system. I tried to eliminate the netframe 1.1 work with the system, but also many other programs is tied to it and would not be able to serve.

  HELP PLEASE!

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  If necessary:

  Order of relocation:

  1. .NET framework 3.5 SP1 (this will install the .NET Framework 2.0 SP2 and 3.0 SP2)
  2. .NET framework 1.1 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  3. .NET framework 1.0 (if you have all the programs installed in need, this blog helps you decide whether or not you need)
  4. .NET framework 4

  For more information, please visit: http://blogs.msdn.com/b/astebner/archive/2010/12/22/10108400.aspx

• I can't start my pc. Error: Microsoft Mobile Pc presentation adaptability Client has stopped working

  I can't start my pc in Normal Mode, it has a pop up notice (Microsoft Mobile Pc presentation adaptability Client has stopped working), but it starts in Mode without failure. How to find and install this software. PLEASE HELP ME!

  Hi, Tan,

  Try the suggestions of the links given and check if they help:
  http://answers.Microsoft.com/

  http://www.ehow.com/how _

• When the update of Mozilla to 18.0 the drop-down list of my client site stop working

  My client's Web site is http://arivins.com/.
  When the update of Mozilla to 18.0 the drop down menu the menu (main menu) stop working.
  The site is based on Joomla 1.5.26.
  I try to update for Mozilla 19.0 but still does not work.
  Please help me solve this problem.

  Thanks in advance
  Anton

  The site seems to use a 1.2.5 old version of MooTools which is not compatible with current Firefox releases.

  • http://www.Mozilla.org/en-us/Firefox/18.0/releasenotes/

  Quote: Mootools 1.2.x incompatible with Firefox 18 and newer. Fixed in Mootools 1.3 and newer (see 789036)

  • bug 789036 - MooTools 1.2.x has been broken by the addition of String.prototype.contains

• host process has stopped working for windows services

  my host process for windows services has stopped working please could you find me a solution please

  Hi joottley,

  ·         Exactly when you receive the error message?

  ·         Did you the latest changes on the computer?

  I suggest you try the methods below and check if it helps.

  Method 1: Put the computer in a clean boot State, and if the problem persists.

  Note: After the clean boot troubleshooting, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: If the problem persists in safe mode, then check the observer after return with details and events for the cause.

  What are the information in event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  See the Microsoft article below and install them updated if the problem occurred after you download updates from Windows Updates.

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520/

• to say an error message: DotMac Sync Client has stopped working

  Client synchronization DotMac has stopped working... Windows will close the program

  http://discussions.Apple.com/thread.jspa?threadID=2475961&TSTART=0 MS - MVP - Elephant Boy computers - don't panic!

• Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

  My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

  Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

  Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

  This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?

  Hello

  Please do as I suggested in the answer above is probably the solution.

  You can also do this after the above.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Curse Client has stopped working

  I use Curse Client to add ons for a game online. Received this message today:

  "An error occurred while trying to load a configuration file of Microsoft.net. It is often an indication of a plant damaged in .net.

  We recommend that you visit the Microsoft Download Center to repair your installation of .net. You want to go now? "

  I went there and offered a download of Microsoft .net Framework 3.5 Service Pack 1. I already have version 4.5.1.

  I can't enter in Curse Client at all. I'm not a technical person, so I don't know what to do next. Someone at - there a simple solution?

  I use Curse Client to add ons for a game online. Received this message today:

  "An error occurred while trying to load a configuration file of Microsoft.net. It is often an indication of a plant damaged in .net.

  We recommend that you visit the Microsoft Download Center to repair your installation of .net. You want to go now? "

  I went there and offered a download of Microsoft .net Framework 3.5 Service Pack 1. I already have version 4.5.1.

  I can't enter in Curse Client at all. I'm not a technical person, so I don't know what to do next. Someone at - there a simple solution?

  Have you reinstalled / repaired in .net?

  Sorry, but I must ask because u don't have the state here

• SuperFetch, Client DNS stop working, blue screen blocks as well

  First stop, I have a desktop HP with Windows Vista Home Premium SP2. He was just out of nowhere an error about 2 weeks code would come and tell me one of these services has stopped working. It allows me to close or to find a solution online. This happens every day. It is very random; I don't see a reason for it. I have especially Windows Mail, IE8 and sometimes open Windows Media Player when these things occur.

  One thing I want to point out is that I did a diagnostic run on my computer and I got a BIOME-1 error code for my ram memory. All other material checks were very good. The computer is supposed to have 2 GB of ram, so is it possible if she works only on 1 GB etc... It is the cause of all my problems regarding windows applications crashing? Oh, also just about every day and sometimes more than once a day, I get the blue screen of death crash. I'm so confused, please help!

  I am up to date on all the Windows updates, so I have SP2 and all updates since then. I also use my service of update and HP as well to ensure that my drivers are working all day.

  Thank you
  Will be

  I put only 1 memory stick into the system and run the diagnotics. If it passes, take it out and plug the second stick and then re-run diagnosis. If it fails, get a new module or clean legs with an eraser to erase and blow your motherboard releasing sheep of dust (do not use compressed air can)

  What is your system model?

• Internet Explorer does not work after Vista Service Pack 2 installation with IE 8

  I accepted the installation of Vista Service Pack 2 yesterday with IE 8 upgrade.  Now, I can't get IE 8 or Firefox to connect to the Internet.  I checked my config proxy and it is set to auto detect.  I had Vista analyze my connection with my wireless router and it is no problem. Please notify.

  Uninstall IE8 and see if that helps:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the bad.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Keyboard does not work after the service pack update

  Original title: keyboard problems

  I installed an update of the service Park on my laptop and now it's like my fn key is stuck. the correct key type if I hold down the fn key.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  Some function keys or keyboard shortcuts do not work correctly on a computer that is running Windows 7

  http://support.Microsoft.com/kb/975741

  Method 2:

  Try to download and install the latest keyboard software drivers from the manufacturer's Web site and see if the problem is resolved.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Hot keys on VSphere 4.0 Client has stopped working

  CTRL-ALT does not work on my PC.  It works on others in society.  I tried EVERYTHING I can think of to solve the problems.  ESX 4 does not have hot keys as the Workstation version preferences, so how can you address them?  It worked until I had to recreate the image on my PC and reinstall the VI Client.  Of course install VMTools "fixes" the problem, but it is a problem when installing a Linux VM.  I have to hit CTRL-ALT-DEL, to accuse received the warning about sending this command to the computer, change etc the CD all that setting (or read an email or go to another application) and then go back and get locked until the next time I need the mouse.

  I googled everywhere and no luck - no one has never had this problem? !

  Thank you

  Charlie

  I had a similar problem before. If you have changed the default ctrl-alt keys in VI client WS will be affected too.

  ---

  MCSA, MCTS, VCP, VMware vExpert 2009

  http://blog.vadmin.ru

• iPhone vpn client stopped working

  I have a 5510 ASA and we use customer Cisco vpn on the iPhone 3G for 2 years.  Two weeks ago, we had a consultant put in place a failover site to site on our ASAs VPN.  This day here of iPhone VPN client has stopped working on all iPhones.  The VPN client on the computers works very well.  When I try to connect with the iphone, these are the errors I get log in the asdm.

  5 April 20, 2011 20:09:02 713119 group = rgrayvpn, username = jtenny, IP = 166.137.140.21, PHASE 1

  COMPLETED

  5 April 20, 2011 20:09:02 713904 group = rgrayvpn username = jtenny, IP = 166.137.140.21, IPSec all

  Proposals of HIS found unacceptable.

  3 April 20, 2011 20:09:02 713902 group = rgrayvpn username = jtenny, IP = 166.137.140.21, QM WSF

  error (P2 struct & 0xac4459d8, mess id 0xd809f748).

  3 April 20, 2011 20:09:02 group 713902 = rgrayvpn username = jtenny, IP = 166.137.140.21, withdrawal

  table correlator counterpart has failed, no match!

  5 April 20, 2011 20:09:02 713259 group = rgrayvpn, name of user = jtenny, IP = 166.137.140.21, Session is

  be demolished. Reason: Phase 2

  4 April 20, 2011 20:09:02 113019 group = rgrayvpn, = jtenny, IP = 166.137.140.21 user name, Session

  disconnected. Session type: IKE, duration: 0 h: 00 m: 19s, xmt bytes: 0, RRs bytes: 0, right: Phase 2 Mismatch

  I have attached the ASA configs of before he brought changes and after he made changes.

  I hope someone can help me.  I'm not very experienced with the ASA (that's why I hired a consultant).  I need step by step instructions.

  If its just broken iPhone vpn connection configuration, Yes, it's the only thing you need.

  by the newspaper that you provide, iPhone vpn connection was broken on phase 2, transform-set is the parameter that is being negotiated in phase 2.