Music app Windows 8 does not work.

Similar Questions

• My application get Windows 10 does not work HELP Please

  1 - my get app Windows 10 does not work. Whenever I try to run your PC compatibility check it says:

  The report is not available now, you can always book your upgrade when it's time to start the upgrade we will run another report to make sure that your PC works with Windows 10

  2. when I click on view Confirmation it Says:

  YOUR UPGRADE IS RESERVED

  There is nothing you need to do now, you will receive a notification on your PC when windows 10 is ready to install.

  and it been like this for 4 weeks and nothing happened what should I do to check if the applications on windows 7 runs on windows 10 or not and start the upgrade to windows 10

  Please help thanks

  

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  or

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• After recent, iPhone, 6, update, Windows, Explorer, does not work, see, iPhone

  I installed the latest update required for my iphone ios 6 a few days ago, and now when I try to download pictures from my iphone to my PC (via USB connection), the PC does not see the iphone.   iTunes sees it yet, but windows Explorer does not work.  It seems that some setting has been broken through the update of ios.  A way to solve this problem?

  Restart the computer and the iPhone. Unlock the iPhone before connecting it to the computer. Any change?

  TT2

• Satellite A300-1EH - windows installer does not work correctly

  Hello, this is my first post on this forum!

  My windows installer does not work correctly.
  What should do?

  Soryy, but I did not now much on computer systems.
  I have reinstall this installer?

  I'm waiting for your answers.

  > My windows installer does not work correctly.
  What do you mean exactly? You see a mistake? What exactly happens?
  Maybe your CD is scratched or damaged.

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• Windows crashes, Windows search does not work, EVENT ID 7042, 1006, 3024, 7040

  When I ran the pc fix - it sollution for windows crashing the results were as follows: Windows search does not work.  The reason;  An event id is logged on to windows search.  Event id numbers are... 7042, 1? 006, 1000, 3024, 7040.

  I'm sorry to say that I do not understand what it means, so I have no idea how to solve this problem.  Your help would be greatly appreciated... ty B.Gregory

  Hi beckilu,

  1. what operating system do you use?

  I suggest you run the fixit from the following link and see if that helps.

  Fix Windows Search when it crashes or shows no results
  http://support.Microsoft.com/mats/windows_search/en-us

• SearchWindows of Windows search does not work,

  Windows search does not work "only 4 or 5 green bars just appear. I waited 45 minutes of ror, but he did say that "connection.

  Hello

  1. What is the operating system installed on your computer?
  2. don't you make changes to the computer before the show?

  Please run the fixit from Microsoft mentioned in the link below.

  Fix Windows Search when it crashes or shows no results
  http://support.Microsoft.com/mats/windows_search/en-us

• Windows Update does not work. Microsoft Update NOT work.error code 80072EE2

  Original title: Windows Update does not work. Microsoft Update DOES not work.

  Automatic update does not work.  When I try to manually update I get error code 80072EE2.  I tried Microsoft Automated Troubleshooting Services.  Whenever it reports it has repaired errors, however there is no improvement.

  There may be another reason -

  Most popular right now: http://support.kaspersky.com/viruses/solutions?qid=208280684

  TaurArian [MVP] 07/01/2005-30/06/2011. The information has been provided * being * with no guarantee or warranty. What works for some, may not always work for others.

• Windows Defender does not work

  Windows Defender support & apparently installs without error.  Yet it will not work.  Is it all the portions of Windows XP if you know something let me know * address email is removed from the privacy *.

  Hello

  1. What do you mean exactly by "Windows Defender does not work"?
  2. do you get any error message related to Windows Defender?

  We recommend that you check if Windows Defender service running. To do this, try the following steps:
  a. Click Start, click Run, type services.msc and click ok.
  b. right click on the Windows Defender service and click Start.
  c. restart the computer and check the difference.

  For more information, see Troubleshooting Windows Defender

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update of Windows XP does not work, how do I stop the Office 07/10 updates?

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  For these last months, the web version of Windows Update does not work with XP. When you click on the button for Express or custom installation, the stalls of system looking for updates. So I had to put windows to warn me of updates instead of going on the site, but now it keeps wanting to download me updates for Office 2007 and 2010, but I do not own these products (I use Office 2003).  I could not stop, even when I ticked the box does not warn me of those more. Finally I went to the site and found an option to disable Microsoft Update, which said I could always download the updates to the site, but I can't because he's trying to force me to re - download Microsoft Update.

  What is going on?  I don't like the new Microsoft Update as it keeps nagging me to download updates for the products that I have not yet owned. How can I update Windows XP only?  This is very fustrating.

  Hi Steve,.

  Follow these steps.

  Go to Start | Settings | Control Panel and double click on automatic updates. I'll explain why later.

  Then, tick the option at the bottom to turn off automatic updates, and then click apply/OK.

  Then, go to start, run, copy and paste this command and click OK: services.msc

  In the list of Services, you can see Background Intelligent Transfer Service ?

  Here's a pix what he looks like.

  

  If it is not listed, follow these steps to register the BITS service.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  You might only see qmgr.dll in C:\WINDOWS\system32 depending on your configuration.

  Then, go to start, run and copy/paste: regsvr32 qmgr.dll and click OK

  Do the same with this file: regsvr32 qmgrprxy.dll

  Reboot the system and then copy / paste this command into the field run:
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  If you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386

  If you could only see the file in C:\WINDOWS\system32, change the path to that instead.

  Restart the PC and then go to the Services and you should be able to see BITS in the list.

  Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Reboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then do the following.

  Go to this link and install the IE8 December Update:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404

  If you use IE7, use this link instead:
  http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442

  Finally, go to the Windows Update site and you should be able to download normally.

  If this is the case, re - enable automatic updates in Control Panel.

• Windows Update does not work on new installations of XP Pro

  Hello world

  I installed a new copy of Windows XP Professional on a Dell Precision, I am about to sell, but for some reason any Windows Update does not work. I reinstalled Windows many times, but I still get the same error in WindowsUpdate.log:

  Detection of triggered via api DetectNow
  Received at THE 1 event
  Customer WU succeeds CClientCallRecorder::BeginFindUpdates of AutomaticUpdates with call id {4602F49D-1C30-4205-A0D7-8C4C7143D7A8}
  Customer WU execution call {4602F49D-1C30-4205-A0D7-8C4C7143D7A8} search Call type
  Verification of the different redirector to: http://download.windowsupdate.com/msdownload/update/v5/redir/wuredir.cab
  Verification of the different redirector to: http://download.microsoft.com/windowsupdate/v5/redir/wuredir.cab
  Verification of the different redirector to: http://windowsupdate.microsoft.com/v5/redir/wuredir.cab
  Could not download redirector ACR on test 3: 0x800b0003
  GetWuidentUrlFromRedirector failed due to error 0x800b0003
  IsUpdateRequired failed with error 0x800b0003
  Trying to get proc active data store
  Out-of-proc datastore is now active
  PT: ServerID using {9482F4B4-E343-43B6-B170-9A65BC822C77}
  PT: By using the server URL https://www.update.microsoft.com/ClientWebService/client.asmx
  PT: Calling methods on server
  Add the header accept-encoding: xpress succeeded
  DetectCompressionType return of type 1, hr = 0 x 0
  Methods: 0x8024400a
  PT: Cannot retrieve fault, origin = methods, hr is 0x8024400a
  Synchronization of updates: 0x8024400a
  Customer WU didn't search for update with 0x8024400a error
  Search booster failed, hr is 0x8024400a
  Affecting detection next time to 2012-08-10 07:38:03
  Customer WU reminded AutomaticUpdates with call failed call to search and 0x8024400a error code
  Customer WU complete and delete call {4602F49D-1C30-4205-A0D7-8C4C7143D7A8}
  EVENT REPORT: {3C043957-5881-4F80-8885-81F17DCEC18E} 17 2012-08-09 16:37:59-1000 1 148 101 {D67661EB-2423-451D-BF5D-13199E37DF28} 800b-0003 0 SelfUpdate failure software sync error: Agent failed detecting with reason: 0x800b0003
  EVENT REPORT: {96CC9537-3732-4A2E-B0E3-81C52B13B4BB} 18 2012-08-09 16:38:03-1000 1 148 101 {00000000-0000-0000-0000-000000000000} 0 AutomaticUpdates 8024400 failing software sync error: Agent failed detecting with reason: 0x8024400a

  I tried with and without Avast! Antivirus installed.

  Any suggestions are greatly appreciated - it drives me crazy!

  Thank you!
  Kyle

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

• Update of Windows XP does not work, error 0 x 80245003. Cannot be updated to SP 3, can't update IE 6 to IE 8. How to solve these problems?

  Update of Windows XP does not work. I tried the correction of the error 0 x 80245003 and nothing has changed. Fix, that it won't work because SP 3 is not installed, because of the Windows Update does not. I try to install SP 3 manually, then downloader windows will not install reference SP 2 must be installed. SP 2 is installed. So I tried several ways to solve this problem, and I keep running into roadblocks of Windows. Help, please.

  Hi my NameJoel,

  See the methods mentioned below and check if that helps.
   
  Method 1:
  How to troubleshoot an installation fails on Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950718
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: A firewall is software or hardware that checks information coming from the Internet or a network. Then the firewalleither blocks information or allows information to pass to your computer. If the information is blocked or throughdepends spent on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP Service Pack 2 (SP2) and Windows XP Service Pack 3 (SP3) include firewall software.
   
  See also:
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
  Note: Disable your antivirus software is not usually recommended, some software antivirus prevents certain system changing files. This can cause the Windows XP SP3 installation failure. To make sure that you manage to install Windows XP SP3, temporarily disable your antivirus software, including any third-party antispyware and firewall program. To do this, right-click on the icon for your antivirus program, and then click on disable. The antivirus program icon typically appears in the bottom right corner of the computer screen.
   
  Important: Make sure that you enable the antivirus software after you install Windows XP SP3.
   
  Hope this information helps.

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941

• I am unable to run Windows Search. No matter how I open it, it says "Windows Search does not work."

  I am unable to run Windows Search.  No matter how I open it, it says "Windows Search does not work."

  What is Windows Desktop Search 4.0 that you have installed with your updates.

  If it is uninstall it from Add / Remove programs.

  The update is KB940157

  If it does not show then show updates is on top, use the method below.

  Click Start , type cmd.
  Now in the result of the research with right-click on cmd.exe and select run as administrator if you are not the administrator.
  Type regsvr32 /u "%programfiles%\Windows Desktop Search" and press enter

  You search old back, see if it works.

  The next time you do the Search 4.0 updates appears again.

  You can try it again if you wish.

• iTunes won't uninstall on my XP Professional version 2002. I get an error message that says that the Windows Installer does not work.

  Original title: itunes won't uninstall on my XP Professional version 2002.

  iTunes won't uninstall on my XP Professional version 2002.  I tried to delete all files from apple and it will let me delete the Apple software update.  I get an error MOUSSOKI that says that Windows Setup does not work.  What should I do?

  Hello

  Run the tool fixit in the following article and check:

  Diagnose and solve the program installation and uninstallation problems automatically