Music begins once the image is selected

Similar Questions

• Mac OS 10.6.8 - Photoshop CS5.1 after years of perfect use, suddenly I'm unable to select a layer by clicking on the image and select it in the layers palette.  Solve this problem for me and I'll buy you a new car.  With our thanks, David Heidelberge

  Mac OS 10.6.8 - Photoshop CS5.1

  After years of perfect use, suddenly I can't select a layer by clicking on the image and select it in the layers palette.

  Solve this problem for me and I'll buy you a new car.

  With our thanks, David Heidelberger

  Hi David

  Have you checked your settings to automatic selection in the upper left of the workspace?

  

• When I right click on the image to select the Image view the Do option auto cannot be selected in the window pop up, it's gray, pls help

  It is in this site http://pics.data.bg/zoom/albums/8f13e1013d12c622ea6b3962684c9828

  on the image - right click > View Image > popup window > open with, the Do this automatically check box cannot be checked

  Viewer - Infran View - I do select outdoor with > window navigation every time, this should be done automatically, but the box is grayed out

  is there a solution?

  Thank you

  • Open in browser: https://addons.mozilla.org/firefox/addon/open-in-browser/

• Can I need separate videos to allow a user to 'Play All' (from the beginning to the end) and select certain sequences (ceremony, reception which the sequence chosen start and end at the rest of the video and not the sequence, speech etc.)?

  Hi - I'm obviously new to yet, but that's what I want to do.

  In a wedding video, I want them to be able to:

  1 play the movie from start to finish.

  2. Select a sequence (say speech) who plays since the beginning of the sequence to the END of the whole video.

  So do I need 1 video for the room, as well as 4 sequences - reception, cake, speech, dance?

  Colin

  You can use separate videos or a single video. The only video is easier for your desired navigation. You will find more people asking how to get the 'chapter' or the video scene at the rear to a menu when it ends and also have a game all. So ignore the advice on those.

  Simple video:

  Your single video goes on a timeline. 'Play all' is a button in the timeline, and the timeline has an end action of "last menu."

  Menu of chapter has 4 buttons (plus a fifth to return to the main menu), going to each respective chapter marker. There is no action to end on chapter markers, so when a new chapter is reached, he continues to play as the piece all the.

  Several videos:

  Each video goes on his own script. The end of video action a timeline is timeline two video etc. Play all is a button that goes to the timeline one. The chapter menu also has a button go to chapter one, and it works identical to the play all. Each of the chapter buttons go to their respective chapter deadlines.

  Still may have some problems with a certain time lag, but I do not think that they affect either of these workflows. Don't rely on the preview again; burn a test disc and play on a DVD player.

• the image tag select vs tag image through the function

  Hello
  
  Why is this work:
  

   case when function1( p1, p2 ) = 'N' 
      then
        '<img src="#APP_IMAGES#1.jpg" title="1">'
    else
      '<img src="#APP_IMAGES#2.jpg" title="1">'
    end nv 

  and it is not:
  

  function2( p1, p2 ) images 

  Function1 returns o or N, function2 returns the same img tag as in 'box when' (< img src = "" #APP_IMAGES #1.jpg "title ="1">"). The first statement shows the correct image, that the 2nd way does not show the image (Red Cross).
  
  The report columns are "Standard report column", when I change that to "Display as text", I see the good img tag.
  
  
  Anyone know why it does not work?
  
  Published by: garcol on February 22, 2013 10:48

  This is because SQL is parsed in the first place, as well as chains of substitution. The results were not analysed. If you want to replace in your procedure, you can always pass a string as a parameter substition and then analyze the text returned to be yourself.

• Can I get an imagefield to fill images on all pages once the image is uploaded

  Hello

  I'm fairly new to LC and I have a dynamic long form from scratch. This form will be used by sales, which will be

  'configure' services, taxes ect to be on the form, then send it to the applicant to be filled. I wish that our sales representative to be able to upload an image to a field of the image (logo) and this logo to be displayed at the top of each page. As I can't seem to add an image field action, how can I do? Million thanks in advance!

  They do not have access to the page master - the master page is what the form is built on, where you set your margins, setting page, boilerplate info, etc.

  You could also have a field of the image on the first page and the image of the field where else you need them and use the global binding to share the same data - for global binding to work they must have the same name and then on the object > link set palette data binding to use global data.

  Or you could code with the rawValue: imageField2.rawValue = imageField1.rawValue;

• Beginning of the image control

  I'm learning the LV for the following steps.

  -Zoom in/out images

  -Animate (rotate, zoom in and out, move) pictures, etc.

  May I know where should I run, any good sample, thank you.

  I suggest you take a look at the examples (help > find examples... ) and image search.

  I think that the example of 'RobotArm.vi' is nice and "SolarSystem" and "Robot".

  Hope this helps

• List of input values (multi-column) must return the output text once the value is selected

  Hello

  I am trying to achieve conditional:

  I create a searchVO(select '' empNumber from dual) - to accept the input value (name empNumber).

  I create empLovVO (select enum,ename, addr, city of emp). lov attached to empNumber (searchVO).

  In the list of values when I select a value (emp 1, a, xyz, abc), it must return the default aby associated with emp values 1 to my output texts

  the name of the EMP one.

  addr xyz

  City abc

  It should also automatically change the values if I select another empNumber.

  Please let me know how to achieve this.

  
  Thank you

  Firstly, for the searchVO, add a three other attributes, name, address, and City, the type of string:

  

  and make sure they are still editable:

  

  Then, you're mapped LOV enum attribute EmpNumber, right?

  Do similar for the newly created attributes, in the list of values dialog box validation:

  Ename--> name,

  --> addr addr,

  City--> City

  

  Then, just to show these attributes in the form of output text, and you'll get what you want...

• Once the images are removed, are all changes to Lightroom also went?

  I backed up a few images on a separate disk. Now, I want to remove them from their original location to free up space on this disk to work.

  If I use "Delete Photos... "and remove them training, are not as alleys changes? If Yes, what is the best way to do this? I know that I could save Metadate all these images in the file, but that seems to be not very effective.

  
  Again, I want to:
  1 free space on the disk has by deleting images catalogued, that have been saved on disk (not catalogued) 2.
  2. don't lose any changes.
  3. avoid having to save metadata to file if possible.

  Any ideas appreciated

  Rapak11 wrote:

  Thanks for the reply.

  It sounds like what you're saying is delete files (saved) outside Lightroom. Then, when Lightroom cannot find them, recreate a link to them to the backup drive.

  You're welcome and Yes.

  Rapak11 wrote:

  Which seems contrary to the notice according to all files IN Lightroom, or management difficulties you!

  Indeed, and I'm sorry but really assent should be:

  * Make all the management of files on a small scale in Lightroom.

  * Moving picture of whole root level branches are however better made in OS, then re - link in Lightroom.

  The reasons for this opinion:

  If you move Lightroom photos outside, then they're going to miss, and you go to the forum... or "nonsense" like re-importing--in Lightroom and you do not have these problems... BUT Lightroom file mover is not super strong when moving to 1000 photos - it's slow AND not entirely reliable. So the reason to move the big branches outside of Lightroom and re - link.

  Hope this will make more sense today.

  IMPORTANT NOTE: instead of delete copies out-of-date photo, just rename the root folders they are, so they're going to miss in Lightroom, THEN after you post the new link.., actually consider suppression--as a precaution.

  Rob

• When I right-click on an image in LR and select Edit in PS, PS opens but the image does not open in PS.  CC (2014)

  Everything seems to work as it should, but the picture just does not open in PS CC (2014).  I am very new to PS everything subscriber to CC for photographers a month ago.  I have the last PS and LR (5.5).  Photoshop just open and that's all!  I know the image I selected in LR to open in LR.  I selected edit copy with changes in LR.  When I do the same edit with the same picture and ask for one of the perfect Photo Suite 8.5, the images opens as expected.  I don't know that I have a preference thing incorrectly.

  Al Guden

  Yet once, thanks for the quick reply, but in searching the web I found someone responds that it looked like something that would go far with an uninstall and reinstallation of PS CC 2014.  I have done that and restarted my PC and back and forth works now.  I guess that the problem was caused when the new version has been added without the 2 previous versions being deleted.  When I have remeoved the 2 old versions, I hope that the link had a falling out.  Now everything is ok.

• Show/hide the image with audio (audio does not if necessary)

  Then, I ran some tests to see what was going on so I could better explain my problem.

  I have a slide with a picture that has four clickable areas. First of all, the student listen tell me for a few seconds and then is invited to click on the image areas that are highlighted.

  When the user clicks on one of the fields, an image appears and I taped audio on this 'object '. Note: I didn't use the slidelets substitution as the clickable area is hidden by the new image when the image appears on a click. The user will press a close button that is on the image, set with another clickable button to hide the image then select another pop up box. (See image below... you can see the image of forklift under the transparent image gray... This is where the user clicks the highlighted area).

  

  I tried two ways:

  having the image plays on the whole timeline from beginning to end of blade (be hidden with the show/hide button function)... when I do it, the sound will not play at all (I'm guessing that this is because the audio went silently on the first few seconds of being on the screen, so by the time the student clicked the button finished audio).

  and

  Drag the beginning of the image to close the timeline when the user is asked to click on areas of the screen... when I do that, the sound play a bit, but gets cut off after a few seconds.

  If I click on the areas as soon as the blade begins to play (since i KNOW where the buttons will be activated), the audio plays very well which makes me believe my theory that the audio runs just at the moment where the user gets to click on it.

  There is no break on one of the buttons around this period, so I know this isn't that.

  What I am doing wrong?

  Thank you! :-)

  I'm happy to say after hours of frustration, I finally got to work.

  I went and read your blog Lieve on micro navigation and managed to keep the images at the point of the slide where the user is asked to click on them and define the action of tip:

  to display the image,

  hide the other images and

  Use the assign with 705 rdcmdgotoframe

  and added a line to continue so it wouldn't break (if I do this, it seemed only allows only not the last his image clicked / or show the function works because I have an action secondard on the second tab to display the button 'next' once all are clicked).

  I had to do the math, but thanks to your info on your blog, I was able to understand this. I just tested it and it works... so I'm not going to save and close and breathe until Monday when I can run my final tests on the entire project!

  Thank you!!

  ~ Gina

• How can I open an image that is sent by e-mail? I can see the image at the center of the window

  Original Tilte: how to open an image that is sent by e-mail? I can see, but little in the middle of the window.

  Hi Sevilla55,

  1. what email software do you use on the computer?

  2. What is the size of the image sent in the email?

  In order to open or view the photo sent in a message e you must first save the attachment and see later.

  (a) open the program that you use on the computer

  (b) open the message that contains the image.

  (c) in the message window, click the file menu and then click on save attachments.

  (d) select the location where you want to save the attachments.

  Once the image is saved, then right-click on it and select the program you want to open the image.

  View and use your pictures in Windows Photo Viewer

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Impossible to change the wallpaper, the location of the image does not display images.

  Original title: photo location not display images

  I'm trying to access my pictures folder and select a background for my office. But when I search for the location of the image and select the folder of the screen does not display images, even if the pictures are present in the folder. The screen shows only 'solid colors.
  I moved to the location of my pictures, sounds and video to another folder. Then, the default folders are different.
  In Explorer when I just click on the photos forlder ther is a location tab saying my it's the default folder.
  One last thing.
  If I go to explore and navigate to the folder my pictures, right click on a picture and select 'Set as wallpaper', then it displays the content and the folder.

  Any ideas?
  James

  I got it working again.
  And that's a good reason to not mess with the registry.
  I have used a tweak registry to hide the libraries in the Explorer navigation pane. Once I've restored it Windows seems to have found the files for my photos. I then re - hid libraries and everything seems to work ok.

  James

• Open the image in the pop-up style (similar to facebook)

  Hello

  I'm working on the galleries for my site in Dreamweaver page, what I want to accomplish is to have my images on the site, with bearings (color to BW or vs, have not yet decided) then once an image is selected opens in a pop-up with a black background and darkens the homepage under him.  I would REALLY like arrows on this pop-up to go through images and a place to close.

  I have made rollover effects but am lost here.  As I'm pretty new to Dw is an enormous task to take on me? Any ideas?

  Thank you!!!

  Giuseppe

  Have a look here http://www.adobe.com/cfusion/exchange/index.cfm?searchfield=lightbox+gallery&search_exchan ge = & num = 25 & startnum = 1 & event = search & sort = 0 & interim_dummy_tmpfield = & submit =

  GRAMPS

• HP T610 more: HPDM deployment for t610 image more crashes during the installation of the new initial start of the image

  We are working on the update of our thin clients HP T610 more.  Update us the thin clients in the last image of the OS WES7P and also update to IE11 and Citrix receiver 4.4.

  We use HPDM 4.6.4

  We have successfully several T610s and update the image of the OS and related software with no problems.  We are then able to use the 4.6.4 to successfully shoot HPDM and image of these thin clients updated in the master repository.

  We then create a task to deploy the new image to several thin clients.  We configure the task to use the imagery being cached, and then run the task.  HPDM then successfully deploys the image for thin clients.

  Customers accept the image cache and once the image is fully downloaded they restart to deploy the image.   After the restart, the image unfolds and decompresses correctly, then the thin client, start the original installation of Windows.

  But for 90% or more of these newly imaged thin clients that they get hung up during the installation of Windows (usually during the message that windows is written to the Registry).  Once the thin clients get hung at this stage they are inaccessible and unrecoverable by HPDM and must be copied via USB.

  We believe that the issue is somehow related monitors are connected to thin clients.  If isolate us completely thin clients monitors, then deploy an image the new image is OK.  HPDM reports that the image has been deployed successfully.  If we then go back to thin clients and reconnect the monitors of the thin client is updated and the screen seems to be in standard vga mode low resolution.  A restart of the thin client then recognizes and sets the appropriate screen resolution, and the thin client is good to go.

  What is normal sound monitors must be separated to deploy a new image?

  Thanks for any idea or thougts.

  From the point of view HPDM, disconnect monitor is not required when you deploy the image. Personal thought is that there is a compatibility problem between the display driver, graphics card and the system. Installing Windows intend to write a default registry value based on connected monitor (maybe display settings), for some reason, he was stuck. I'm not the driver or the operating system that you are an expert, I would say that you submit a ticket to HP for additional troubleshooting.