MXF any 'no audio or video stream.

Similar Questions

• Import of failure - GoPro Hero4 4k30fps-"the file has no audio or video streams.

  I try to import a video of 4k30fps of a Hero4 GoPro black and I get this message "the file has no audio or video streams.

  I tried to import into a number of different ways, is there a help or advice?

  I use Windows 7 64-bit and Adobe Premiere 8.0.1 (21)

  Thank you

  Uninstallation and reinstallation of a "Typical" Apple's Quicktime installation seemed to fix the problem.

• The file has no audio or video stream

  Before asking this question, I did a quick search and found out that someone else has already reported that this problem and cause seem to be the lack of Quicktime player when you import mov files.  In my case, I have on my PC, and as a matter of fact, the export worked perfectly with these mov in my sequence front of quicktime.

  Today when I opened my project, these * files mov became offline.  And when I tried to Link Media, he gave me not wander from audio or video stream.  What is wrong with him?  I did nothing of PP since the last time where everything was perfect.

  Never mind.  I just thought of it myself.  I installed the kkkkk emulator on my PC that apparently confused the system.  After uninstalling it, PP works well again.

• . MOV in CC files: the file has no Audio or Video Streams

  I've recently updated the Prime Minister to CC, since I questions auditing all .mov files.

  The specific ones Im trying for my current project is exports of EI, visited .mov without loss of animation, worked well in CS6, will play in quicktime and other generic company but still get the message of that the queue has no Audio or Video Streams trying to import them into a project.

  QuickTime is updated so I do not understand why him will not play, is this a bug CC?

  I will return to cs6 on my another computer they open very well...

  I've seen a few topics on this zero with a resolution and in addition to those from where the cam is an export of EI, anyone able to help it prevent me from work atm...

  Troy

  I had tried, has not worked for me, I think it was a confrontation with sorreson for me, I reinstalled is and all the progs out of squeeze and have no problem now, when I have the time to do a recovery point and test it out I will, right now got to a lot of work to spend time on it

  Sent from my iPhone

• Premiere Pro CS6 importing .mp4 = "the file have no audio or video streams."

  Hello

  When I import a clip in Adobe Premiere Pro CS6 MP4, I get the following message:

  "Failure to import a file.

  151_0010_01.MP4

  Error message

  The file has no audio or video streams. »

  I have the latest Quicktime, and I reinstalled Premiere Pro CS6 several times already.  If someone knows a solution for this, I'd be very happy.  Below are my system info and the clamp.  Thank you, Robert.

  Operating system

  Win 7 Ultimate 64 bit

  CLIP INFORMATION

  Full name \BPAV\CLPR\151_0009_01\151_0009_01.MP4

  Format: MPEG-4

  Operating name: XDCAM EX 35

  Format profile: Base Media / Version 2

  Codec ID: mp42

  File size: 1.76 Gio

  Duration: 7 min. 5 sec.

  Overall bit rate mode: Variable

  Overall bit rate: 35.6 Mbps

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Video

  ID                                       : 1

  Format: MPEG Video

  Operating name: XDCAM EX 35

  Format version: Version 2

  Format profile: Main@High

  The format, BVOP settings: Yes

  Format settings, matrix: Custom

  Parameters of the format, GOP: M = 3, N = 15

  Codec ID                                 : 61

  Duration: 7 min. 5 sec.

  Bit rate mode: Variable

  Bitrate: 34.0 Mbps

  Maximum bit rate: 35.0 Mbps

  Width: 1 280 pixels

  Height: 720 pixels

  View picture format: 16:9

  Frame rate mode: Constant

  Frame rate: 29.970 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  Compression mode: lossy

  /(pixel*Frame) bits: 1.231

  Stream size: 1.68 Gio (96%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  Primaries: BT.709

  Transfer characteristics: BT.709

  The matrix coefficients: BT.709

  Audio

  ID                                       : 2

  Format                                   : PCM

  Parameters of the format, "endianness": Big

  Format settings, sign: signed

  Codec ID: two

  Duration: 7 min. 5 sec.

  Bit rate mode: Constant

  Flow: 1 536 Kbps

  Channels: 2 channels

  Sampling: 48.0 KHz

  Color depth: 16 bit

  Stream size: 77.9 MiB (4%)

  Language: English

  Encoding date: UTC 2009-07-19 04:22:10

  Marking date: UTC 2009-07-19 04:22:10

  DELETE files inside "Media Cache files" and "hide media".

• The file has no audio or video streams.

  We have two new PC, identical CS5 running. You can open a .mov without problem and the other gets this error "the file has no audio or video streams." Can't import the file from the network. All the settings seem to be the same on both machines.

  The two PCs have installed Quicktime?

• IDS/IPS signatures for monitor audio/video streaming applications

  Hi people,
  Can someone Advisor on the names or signatures that could be used successfully to control the use of streaming on the network applications. The plan must feed to MARS and then create reports on streaming applications use to use it later for the creation of a security policy preventing the theft of bandwidth.

  Perhaps suggestions on how to create a custom signature to monitor the audio and video streams would be appreciated.

  Eugene

  Hello Eugene,

  It is possible to matching strings video specified in your capture by examining the Type of content. Run after the connection with a TCP reset or refuse the inline package will keep the video of the game - which will save bandwidth that the video would have used otherwise. However, it is important that we establish the role of the IPS appliance. The IPS is designed to detect and limit the attacks by matching known traffic patterns. For TCP, this obligation can also include some that drop a bag to disrupt a flow. The IPS is not fundamentally designed to monitor flow and provide a number of bytes for a particular protocol so that the use of protocols analysis can be performed.

  The signature below will drop packets with the flv-application Content-Type, which will keep the video that you have tested on break.com of play. Each video streaming site works differently. A screenshot of each video streaming site will have to be examined and another custom signature written, if you want to block all. Also, keep in mind that many sites offer different options for streaming videos. It may ask you to take multiple shots at each site - one for each method of streaming.

  signature-60001 0
  alert-severity average
  GIS-description
  Flv-application TCP SIG - name string
  output
  engine-tcp chain
  products-event-action alert | Reset tcp-connection
  Regex-string flv-application
  service port 80
  the service management
  output
  alert frequency
  Summary-fire-all mode
  output
  output
  status
  enabled true
  output
  output

  Thank you

  Blayne Dreier

  IDS Cisco TAC team

  * Please check our Podcast *.

  TAC security show: http://www.cisco.com/go/tacsecuritypodcast

• WiFi, drop any audio/video streaming via Bluetooth

  Hey everyone, so I had a problem recently.

  I recently got a bluetooth headset. It's a BlueAnt Q1. I have updated to the latest version of the software package and also have had no problem with him.

  In recent weeks I noticed wifi PRE stall while I'm listening or watching an internet video stream with my Blueant Q1 is connected. The flow stops, and either Stitcher/Pandora/Mediafly reports an error of some sort. The only reason why I know that its wifi is because I tested it. I look carefully until I see the problem arise. The phones wifi goes down to 0 bars, and then this little icon three points could appear as it reconnects. I tested it on two of my routers, which is a wireless bridge. This happens on both. I had my phone because I think that 6 months now and never had any problems with wifi or streaming content until I started using bluetooth.

  Here are some specs and the equipment I use.

  Palm pre more (Verizon)

  BlueAnt Q1

  Wireless Asus, one acting as a wireless bridge two routers

  (The problem occurs on both)

  ASUS WL-520 (DD - WRT)

  ASUS WL-520gC (wireless bridge, DD - WRT)

  Everything is up to date on the firmware and upgrades. Also when this problem arised, I didn't any changes in versions of firmware/software to upgrade before or since I got the bluetooth headset. Other than the upgrade of the headset to the current firmware.

  The thing is, I don't remember what happens the first week or so by using my bluetooth headset.

  Any advice? Or maybe it could be a known issue? Any help would be appreciated, thank you!

  I posted too soon. Apparently its my two routers current-wrt firmware dd that caused the problem. Used an old non-ddwrt router and it was very good. Replaced by a different version on both my current routers and seems to work correctly. Weird, but I'm not complaining.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• HELP V3 - 572 G Windows 10 update NO SOUND and wont play any audio or video file

  Hello world

  I just upgraded to windows 10, very nice update and don't usually return to 8.1, but unfortunately not windows programs will play files, audio or video of any kind and when you use VLC Player or youtube videos, the files will play but no sound?

  I checked all the regular suggestions such as the properties of the device and it claims to work fine etc., sound is not mute, except pass by and update drivers I don't know where to go from here.

  I was going to do a reset, keep my files, remove applications and settings, etc., I was warned it would remove apps, but a lot of what seems to be crucial drivers/programs will have to be re-installed manually. Also after doing a reset, you lose the ability to go back to 8.1

  Since when they were abducted during a reset?

  Any help is very appreciated,

  see you soon

  Jessie

  Uninstall your Realtek drivers and install the latest audio driver Realtek available here:

  http://www.station-drivers.com/index.php/downloads/func-startdown/1618/

  Web site, 100% reliable, you must extract the files, double-click on the exe and the balance sheet to create a folder on the file setup.exe

• How to make a streaming audio and video on BlackBerry.

  Hi all

  Please someone help me.

  I must be a 3rd part java application that can stream audio and video server and can play only audio/video on my phone from BB.

  Please share me your ideas or related links to do the same as soon as POSSIBLE.

  Thanks in advance.

  Thanks Peter.

  It's really useful links

• I hear no comong audio or video of any website, like Youtube or Kelby Training, any ideas?

  In the last two days, I lost all my audio online on FF.
  Is there a switch or something I can have disabled what can cause this, or was it the last updated?

  Like I said it just happened in the last days...

  See what to do if Firefox will play all of the sounds and difficulty common audio and video questions

  You can click on the Volume icon in the Windows taskbar near the clock and click on the link to mix down to open the mixing console.
  
  You can adjust the volume level for each application in this window, so make sure that Firefox is not set to mute or set at a low level.
  
  You will see only the Firefox program in the mix if you are on a website that plays sound.

• Satellite C650-152: Audio and video started to jump after software update

  Download the latest BIOS updates and as requested my laptop network card, and now all the audio and videos, including on the internet, jump every few minutes.
  Really annoying as didn't have the slightest idea on the computer technical stuff and it doesn't seem to be in any way ask Toshiba support.

  Any help would be appreciated, I have a Satellite C650-152 with Windows 7.

  Hello

  Go into the BIOS (F2 when starting the laptop) and in the BIOS the BIOS default settings.
  Press F9 for default settings.
  Save the changes and restart the device.

  May I ask if this product just streaming audio or video from the internet or have you noticed that play audio and video files stored on the HARD drive?

• Read the H264 video stream in applicaton of media

  Hello

  I'm using DataSource/SourceStream way, following the article 'How To - audio in support of the application of media'

  I can get only the video stream H264 remote server, without audio stream or rtsp Protocol or any information of container.

  Can I feed this video H264 stream directly to the player? If so, I don't know what type MIME to use the setContentType() function. Be it "video/H264" or other types MIME? I checked "http://www.rfc-editor.org/rfc/rfc3984.txt" and found "this type is only defined for transfer via RTP.

  Appreciate for your help!

  Finally, I got H264 video streams play fine.

  I got my BlackBerry9000 (OS5.0) yesterday and tested H264 video streams can be fed directly to the drive using InputStream. And Ms. type should be "video/mp4".

• Error Blu - ray: 'invalid operation', Code: "19", note: "attributes main video stream must be compatible with the playList.

  Hello

  I can't create a Blu - ray folder or Blu‑ray Image with my project.  Whenever I click on Build, I get this error:

  Purpose of Blu - ray: "< timeline > Untitled chronology", error: "invalid operation", Code: "19", note: "attributes of the main video stream must be compatible with the playList.

  I created my .m4v file and .wav files in Adobe Media Encoder using the H.264 Blu - ray built-in HDTV 1080 p 23.976 high quality.  I also tried to create several variants (encoded Dolby Digital audio, tried the HDTV 1080 p 24 high quality preset).  No matter what I still get the same error above.

  I only have a basic (no movement) menu, but I tried to remove it and still get the error.

  Still isn't my files and I want to keep it this way if possible and use the best rendering of SOUL of transcoding capabilities.  The only change I make for the presets of SOUL must enable VBR 2-pass and use maximum render quality.  Who should not cause the issue?

  I searched the forums and did not find anything.  Someone suggested to restart yet, but that did not help.

  Any suggestions?

  Thank you

  Graham

  I finally got the Blu - ray folder created.  I imported my original uncompressed AVI again and let the transcoding.

  So, the moral of this story is that still did not like the pre-transcoded from Adobe Media Encoder files.  Your suggestion on the audio being a slightly different length as the video could be a possible cause, if SOUL actually creates files with this problem.