My 2.2 update seems to be stuck

Similar Questions

• My update seems to be stuck to install. Any way to stop it and try again?

  My update seems to be stuck to install. Any way to stop it and try again?

  MY update is also at a standstill.  I turned the computer and disable several times, but nothing works.  Tried to start in "safe mode", but which does not work either. Anyone have another suggestion?

  IMac, mid 2011

• After downloading recently some 60 more Windows updates that me seems to be stuck in an infinite loop restart your computer.

  * Original title: download Windows updates

  After downloading recently some 60 more Windows updates that me seems to be stuck in an infinite loop restart your computer.

  Download the historical State successful but may need to restart.   Several attempts to restart always end with reboot so unable to see if other updates are available.

  Windows Update does not work

  This is a very common problem lately.

  Download and run the appropriate version for your system from the system update readiness tool.  System 32-bit X 86 must https://support.Microsoft.com/en-ca/KB/947821.  System 64-bit X 64.

  As a general rule, the following rather simple and fast process should be.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-update/Windows-Update-problem-error-code-80080008/de8114b5-1487-4B31-9b28-f11974718df1?auth=1  This thread has essentially lists a series of commands that I found generally fixed WU.

  Start, all programs, accessories, right-click on command prompt, select run as administrator, OK.  Type the following in the black box:

  1. net stop wuauserv
  2. net stop cryptSvc
  3. net stop bits
  4. net stop msiserver
  5. Ren SoftwareDistribution.old C:\Windows\SoftwareDistribution
  6. Ren C:\Windows\System32\catroot2 catroot2.old
  7. net start wuauserv
  8. net start cryptSvc
  9. net start bits
  10. net start msiserver
  11. pause
  12. Output

  Services of type in the text box above the start planet.  Find each of the following items and make sure they are set to automatic: Intelligent Transfer in the background, cryptographic, Windows Installer, Windows Update services.  Double-click on each item and choose automatic.

  Now restart Windows Update.  Do NOT restart Windows.   Be very, very sick, it will probably take a while.

• Keyboard on my satellite error - 'L' key seems to be stuck, forces logut

  Hello I'm fixing a satellite phone with a keyboard error, the 'L' key seems to be stuck permanently down, except that it's not! Also by clicking on the button start requires the user to be disconnected and returned the the login screen.

  The keyboard is very well, I checked and cleaned and he ran through a keyboard test program, I started the system by using restore dvd navigation of xp sp2 installation.

  Updated the bios to the latest version of xp put, same error.

  I restored using a different copy of xp sp2, same error.

  I've also been to windows update (without clicking Start!) and checked to make sure that the laptop has had the latest updates (there) is not a problem of update, I also checked for viruses and the machine is clean.

  If someone has had this problem or did someone knows how to solve. I don't want to not bin the machine because it is only two years old, but she seems to be a hardware error any in my opinion.

  I have used some text here in a previous post on the closed forum that was not resolved so indeed I'm restarting, but I have the same problems-plus in my case disconnection forced by clicking Start.

  Hello

  For me, this looks like a keyboard failure.

  A friend of mine had a similar problem with non-Toshiba notebook.
  Finally, the technician changed the keyboard and the problem was gone.

  I think you should just ask a Toshiba ASP, who is responsible for your country for a control and possibly replacement keyboard

  I think this should help

• Keyboard on my satellite error - 'L' key seems to be stuck

  Hi everyone, I was asked to fix a satellite phone with a keyboard error, the 'L' key seems to be stuck permanently down, except that it's not! The keyboard is very well, I checked and cleaned and he ran through a keyboard test program, I started the system using a Linux live cd rather than the windows XP operating system, it already has in it.

  In the live cd that we still get the same error, i.e. the "L" key continuously showing also depressed is not the driver, it takes the bios I think.

  I've also been to windows update and checked to make sure that the laptop has had the latest updates (there) is not a problem of update, I also checked for viruses and the machine is clean.

  If someone has had this problem or did someone knows how to solve. I don't want to not bin the machine because it is only two years.

  See you soon

  Cervantes01

  It seems that you've tried everything that is possible to fix this. But without succeeding :(

  It s time for a professional look by laptop technician. Maybe the entire keyboard needs to be replaced. Who knows?
  Without any specification check it s not easy to provide an exactly fault diagnosis

• Updates to Windows vistsa stuck in step 3

  My laptop has been updated the vista software while my laptop was in mode 'sleep', I woke up thinking, I had not turned off and just opened and closed, it does not on the screen... the screen must have said, once again updated step 3 of 3, 0% complete, please do not turn off the computer.
  Now, he seems to be stuck in a cycle of say the updates and then stops and then restarting without me pressing anything. I tried now pressed the power button and from the laptop in safe mode, but the same thing happens again. Sometimes the desktop appears and I tried shuitting down continues properly, but the same cycle!
  It's very frustrating and I need my laptop for college work!
  Please help... my laptop is a toshiba EQUIM A200 - 1V0 PSAF5E model number - 002005 5 K bought in December 2007.

  Hello

  You can use the solutions here:

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx
  Rob - bicycle - Mark Twain said it is good.

• Not updated Windows Vista gets stuck

  I've seen several threads on these, but they do not seem to help.

  I have Vaio laptop with Vista operating system threads. It used to work well until last year.  However, lately when I try to start the computer, it did update Windows and gets stuck on update 3. I tried all the options in advanced mode by clicking on F8 key-start in safe mode, starting with the command line, start in recovery mode, etc. and they all end with the same question.  I don't have a backup boot drive.  I need to recover important data on the computer and need to start the machine atleast once.  Still, I don't want to disassemble the drive hard, etc..

  Can you please help.

  Thank you

  Hello
  Welcome to the Microsoft community.
  Please follow the suggestions in this article and check if that helps.

  Windows Update crashes when installing updates in Windows 8, Windows 7, or Windows Vista

  Note: Follow the steps in method 3 first, and then try the FIXIT.

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• I have an iMac 27 inches. The mouse seems to be stuck. Changed batteries but nothing seems to move the pointer.

  the mouse seems to be stuck. changed the batteries for new ones, but nothing makes pointer move. ?

  Reset the SMC and the PRAM by LANDAU and iMac SMC reset instructions (this may need to be done 2 - 3 times) and then repeat the test. Please post back with your results.

• BIG PROBLEM with Dell Laptop keyboard - CONTROL seems to be stuck

  The CTRL (left) seems to be stuck in a way. Not like in the operating system that you are stuck where you cannot open stuff but physically. It works and everything, but when I press on the edge of the lower left there feeling like it won't go down any further. Now here's the thing
  I had the EXACT

  Same problem with my ALT key on the top right corner, after hours and hours of press here and find good... The point 'G' {in this term well say it means good} button, who fixed it, but now I have it again with the CTRL key

  and when you tilt your head to the level of keyboards and press gently on the left-hand side of the CTRL key, you will see the L. R left side down and the right side is not, but if I do it with another key to sound normal, balanced sound, pressing on anywhere will descend the whole key.

  Sorry to be paranoid, but it drives me crazy, I don't want to send it in for repair, I tried to drag the undernath paper, there is no food or anything there, I never eat near my laptop - and I tried to suck with vacuum on LOW Power and a sliding brush. Nothing came out. Don't know what to do.

  Any help would be appreciated.

  It won't go down, he's going like halfway and feels more difficult to drive, and I don't want to break it.

  Hello

  There seems to be a hardware problem, I suggest you to contact Dell for assistance.

  http://support.Dell.com/

• my standard drawing tools in a given paper seem to be stuck in some kind of preset isometric drawing. someone knows how to get back to 'normal '. my cursor has a cross and an arrow pointing to the left.

  Hoping that this is easy. my standard drawing tools in a given paper seem to be stuck in some kind of preset isometric drawing. someone knows how to get back to 'normal '. my cursor has a cross and an arrow pointing to the left.

  disable the perspective grid. Shift + ctrl + I

• I am loading windows xp update and it seems to be stuck at loading files Qlogic, is this normal or is at - it something wrong?

  My computer crashed.  I use windows xp and talked to a technician who informed me that I have to reinstall windows because I could not the computer to boot from a boot disk or safe mode.  I have an upgrade to Windows XP Professional edition.  I tried to use that and it seemed like it was loading, but now is the 'Setup is loading files (qlogic and qla12160, 64-bit PCI DOUBLE 160 M SCSI HBA)..." "and did not move a 30 minutes.  Is this normal or is it blocked and what am I doing here?

  You use an upgrade? You have the admissible disc of the original software so that it can be installed? If this isn't the case, you can't.

  http://www.Google.com/search?q=Setup+is+loading+files+%28qlogic+and+QLA12160%2c+64+bit+PCI+dual+160M+SCSI+HBA%29&ie=UTF-8

• Update system seems to be stuck?

  I started an update system about an hour ago and he is sitting on the white screen Sony Experia. The power button does not work so I can't even interrupt the update to see if something crashed.

  I only have available Linux so I couldn't use the method of updating PC so apart to disconnect the phone from the charger and let the battery die, y at - it something I can do?

  Yes, try pressing the power button / stop and volume up at the same time, the phone should go off. Turn it back on.

• HP Pavilion p6 200ukm: Windows 7 update takes forever or stuck?

  I recently installed a new HDD with Hp OEM dics and I tried to use windows update, but it seems to take forever to find updates. I don't know if its stuck or if it theres something wrong, but I can't find the updates.

  Any advice or help on how to solve this problem?

  Thank you

  Hello:

  See if the installation of these two updated microsoft windows patches work for you...

  https://support.Microsoft.com/en-us/KB/3083710

  https://support.Microsoft.com/en-us/KB/3102810

• BlackBerry Smartphones download updates seem to take too much time

  I download updates for my Curve 9300,

  first of all why do download 659 modules which seems a lot?

  He reached 286 and stuck? What happens when I plug United Nations as reviews say it can restore my useless device? I'm 3 + hourrs and waiting?

  Yes, the upgrade process is not ideal.

  After three hours, I think that I unplug it and hope for the best. The process should make a backup first, so you should not lose any information from any front.

  Let us know if you need help.

• iPad iOS 3 9.3 update failed and now stuck in recovery mode

  Hello

  When the update of iOS was released, I first downloaded iTunes may and then I press the button to update. Unfortunately, the update process is stuck with the message "Waiting for iPad ' for 30 minutes. After that I disconnected the iPad I'm not able to recover from the iPad. I can put in restore mode. When I chose to restore the iTunes unpacked iPad iOS 9.3. By pressing the button restore the iPad change from the "Connect to iTunes" screen for the Apple Logo, he's retired (Message of ITunes: 'Prepare iPad'.) Then the Apple Logo with an empty progress bar is displayed and the message on iTunes becomes "Waiting for iPad» and more coming. I tried 2 different Macs, 4 different cables. Any idea?

  Leif

  Press the sleep/wake and home buttons and keep them for at least 10 seconds.

  Try using DFU mode:

  • Connect your device to your computer via a USB cable.
  • Turn off the device.
  • Press and hold the Power button for 3 seconds
  • Press the Home button while holding the power button and hold both for 10 seconds.
  • Release power but KEEP the Home button NOW button.
  • After about 15 seconds, iTunes will tell you that it has detected a device in Recovery Mode.
  • Restore your device

  More info here: https://www.theiphonewiki.com/wiki/DFU_Mode

  Contact Apple support team and ask for help:

  https://www.Apple.com/support/iPad/contact/