My 9 year old iPhone at all lights

Hello

I've owned my old beautiful iPhone since it was released in 2007, the story is that it seems the most time I got the more times I had to put it on charge, I remember first four years have I had to load it as once every 3 days now, I remember in 2012 I had charge my phone at least 2 times a day Now only today, it only lasts about 10 minutes fresh off so I have to take a charger laptop with me I use my phone for banking by internet, photos and music and reading, and this phone is important to me because it has pictures of my deceased parents and wedding photos, the problem is it won't turn little matter what I it was at least 3 days because it does not show the signs of life, I have never dropped this phone in cash or whatever it is I hold down the button and nothing I have let it charge for a good load for about 2 days and nothing please help

Hello

Unfortunately the batteries begin slowly die over time and wasting time, they hold their charge. I'm surprised that yours lasted so long! Therefore, you have more you had to load. Have you tried to use a different cable and plug directly into your computer or by using an adapter in your wall in an outlet that you have tested with another device to ensure that it always works?

Tags: iPhone

Similar Questions

  • connect 6 1 year old iphone to itunes for the first time without data loss

    They (pc and iphone) are both devices allowed on the itunes account.

    Can you give us more information please? What kind of messages do you see? -AJ

  • My 5 years old Satellite Pro P300-19 q has developed all of a sudden a fault

    Without realizing, I posted the message below on the Forum we Toshiba:

    Hello

    My laptop which is 5 years old and has worked without any problems, has suddenly developed a fault I don't seem to be able to untangle. It starts ok and gets on the screen "Toshiba Leading Technology" and it's not there. Should not or reaction to something. I tried to enter the power on Start menu and pressing the F12 key, it recognizes and says 'Please wait' but nothing happens. It applies to "Configure" button F2 and F8. There is absolutely no response and HDD led light does not illuminate.

    I have not installed or changed anything. It runs Windows 7 and I don't have the recovery disc and the installation CD original W7 but they are useless if I can't access the startup option.

    I also removed the HD and connected by USB connection to my work desk and access all my files and programs, so it doesn't seem to be something wrong with the disc either.

    Can someone offer me some suggestions?

    ___I HAVE HAD THE FOLLOWING RESPONSE_; __

    Looks like you have a corrupted BIOS.

    I recommend asking Toshiba http://pc-support.toshiba-europe.com/ for any help. They got the disc special crisis to retrieve the faulty ROM BIOS module and instructions on how to install it.

    I contacted the technical service of Toshiba UK enclosing the message above but have not heard
    anyone after. Does anyone have information about this recovery disk and where I could get it?

    I also think that the BIOS can be troublemaker in the whole of the situation. When you start your machine, it begins with the verification of low level material and later start to load the operating system preinstalled.
    In your case the laptop is blocked for some reason any on this first step.

    Unfortunately, your options are pretty limited. What you can try is to remove the check and RAM modules and so portable HARD drive will pass this first stage.
    AFAIK the disk of this crisis is for internal use only so I don't know if you will get it somewhere. What you can try is to google a bit and maybe upload it somewhere with specific instructions on its use.

    In the end, I must say that these issues don't occur so often and I have to ask anyway: you may have updated the BIOS or done something that may be responsible for this?

  • IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

    IM moving to the United States, to the United Kingdom, and have a 1 year old Office Mac, Ipad 2 and iphone 5 s, I need new Chargers/cords?

    You need not buy new Chargers.

    You need to plug adapter American Electric type.

    http://www.worldstandards.EU/electricity/plugs-and-Sockets/

    All computers/Apple iOS devices come with voltage: 100-240 v AC.

  • I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?

    I need to transfer my history of the text and images from my old iPhone to my new iPhone, but have already moved all other data to my new phone via iTunes and spent time to organize.  How do I reset this transfer without any?  I transfer a 5s to itself.

    For your photos, try importing them to your computer and their synchronization then back to the SE.

    Import photos and videos from your iPhone, iPad or iPod touch - Apple Support

    For your texts, they moved with the backup restore?

  • Hello. I have perchased the new iphone, and I gave my old iphone to my little brother. I erased all the content and the date in the settings menu. This will automatically delete all my photos data old messages etc. thanks

    Hello. I recently perchased the new iphone, and I gave my old iphone to my little brother. I erased all the content and the date in the settings menu. This will automatically delete all my photos data old messages etc. thanks

    Follow the directions here: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support before giving the phone to your brother. -AJ

  • I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVDs, serial number and pack

    I have 2 MacBook Pro, we are years and the other is 8 years old, I got photoshop cs2 on the former. After cleaning the disc hard I couldn't load the cs 2 on any of my laptops. Can I purchase an upgrade for it? I have all the DVD, the serial number and packages, but I can't use it.

    Pricing plans and creative Cloud membership | Adobe Creative Cloud

  • Help continuity when using 4 (old) and El Capitan (keeping an eye on my 9 year old)... I'm new to mac is so go easy on me.

    Well, 1st of all... Hello. Second... If you take it easy on me please... I am new to Mac but not new for iPhones. I have an old 4 I used to keep an eyeout on my 9 year old... I just got my mac and started having all loaded profiles and today there is no activity on iMessage. I think I know the answer, but as I said, I got a Mac for about 2 days, but it took many years of iPhones.

    My initial guess is that continuity is not able to interact with any iOS prior to 8.1, but it used to. The only other was activate keychain and turn on the transfer procedure. The other phone is a 6. Anyone know what all the seetings should be?

    Thank you...

    Cory

    Continuity is not supported on the iPhone 4.

  • My 7 d is two years old. Photos seem to be burned. Disgusting ISO performance. What should I do?

    I compared it with the same old 7 d bodies or more. They perform much better.

    I installed firmwere. Areas of high lights are always too well burned which gives the feel of a 10 year old camera.

    Is it possible to change the sensor? It will make a difference?

    How much it can cost to change the sensor?

    Yes, it would be useful to see an image with the EXIF info.

    It is possible, that something is wrong with the camera.

    However, it is also a good possibility that something is out of adjustment. Have you tried to reset the device to its default settings? Only from your description, I suspect that exposure Compensation value highly the positive side. This assumes that you use in one or the other of the auto exposure modes, of course.

    Or, it is possible that something is "stuck" in the memory of the device. You might want to try "reboot" of the camera. It's pretty simple to do with the 7 d. Turn off the camera, remove the two batteries (battery and the small battery, silver date drawer merchandise the rechargeable), turn on the camera, press the shutter button once. It does not occur, but it should drain the remaining power in the camera and to make a "reboot", clear memory. Turn it off again, reinstall the battery, then check the time. Is it is necessary that needs to be reset, then you have a good reboot. If not, start over, but not remove the battery for half an hour, maybe an hour this time. Check the date and time again.

    If none of the above help... you could also try reinstalling the firmware. Download a new copy on the Canon site and follow the instructions. It's easy, just be sure your camera batteries are charged correctly (if the camera turns off due to low battery in the middle of an update of the firmware, it can "brick" the camera, which means you will have to go home.)

    If the reset to the default values, by restarting and reinstalling the firmware do not help and we cannot give you useful advice in watching one or a few sample photos, it may be necessary to send the camera to check. There might be a bad element, but it is likely that the sensor or the shutter. A bad sensor normally comes as black bands of dead pixels, or all of the black image. A bad filling is normally an area of the image partially black. Mainly, I would suspect a measurement system that is out of whack... or incorrect shutter... or the incorrect aperture control.

    I have two 4.5 year, 7 d, each with about 100 000 clicks on it, and they work fine. I hope that we can find a simple solution to the problems with yours.

    ***********
    Alan Myers

    San Jose, California, USA.
    «Market softly and carry a great lens.»
    MATERIAL: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
    FLICKR & REPROGRAPHY

  • Photosmart 6510 "Printer Error" and all lights flash

    I have a 1.5 years, Photosmart 6510 B211a who works well. Now, all lights are flashing and or my USB connected PC (Win 7 Ultimate 64-bit), or my iPad or iPhone (OS 7) connected wireless will be printed.

    When the printer is turned on it goes as usual, wireless and power light stay on and displays correctly (Apps, Snapfish, Photo, copy, Scan), I can print from all devices.

    Symptoms:

    1. in ~ 5 minutes, no noise, all LEDs (displays the screen "Please turn printer then turn it on again."

    2 "(Printer Error is lit above screen, lights beside screen and power and wireless) starts to blink in unison"

    printer does not print

    3, every 10 seconds, a very low "short moan" noise, like something is trying to move inside the printer

    4. when power is cycled it will again be print normally for about 5 minutes and then stop again with flashing lights.

    Have you tried the following.

    1. hard reset (more than once - fired power and USB)

    2. uninstalled and reinstalled software and drivers

    For any help or suggestion will be appreciated.

    Possible solution

    I had the same problem when I moved the printer to a new PC. To end, I decided to change the USB port to which the printer is connected to. well, it worked! Printer now work correctly for wired operation and wireless.

    Not sure if I got a bad USB port or that the cable was not seated properly, or if the USB port had no authority to provide the connection to the printer.

    Hope this helps someont with this problem.

  • 6 64GB iPhone - restart all the time

    Hello

    Since yesterday my 6 64 GB Iphone restarts all the time.

    There are apple journal on the screen, then screen is black and once again apple appears.

    I can't stop it, I can't go to the deskop. Nothing. Mobile phone doesn't help.

    What will happen? Please notify.

    I've read a few articles that the iPhone 6 have such problems because of the memory of TLC.

    My cell phone is 15 months old, still on warranty. I will send a formal complaint to Apple?

    Thanks in advance for any advice.

    Martin

    MY phone which does too! is it not so boring! I have an iPhone running iOS 10.0 6. Help, please

  • I need to transfer my music libr of old iPhone to the new iPhone. Old iPhone is now dead, but still have Bluetooth options

    Hello

    I need to transfer my music library on my old iPhone that is now dead but have to still my new iPhone bluetooth SE. Is there a simple way to do it by connecting the two or a PC?

    Hi mirror_reloaded,

    Thanks for checking out the communities Support from Apple! I understand you wanting to get your music transferred to your new iPhone SE. I listen to music every day while working, so I can understand wanting to make sure that you have access to your music.

    Synchronize music with an iPhone only works in one direction, from your computer to your iPhone. You are not able to transfer the music from your iPhone to another iPhone, but there are other ways that you can move your music and I would be happy to go on those who are for you.

    First of all, if you have any music you bought on iTunes, you can always re - download these purchases with your Apple ID click and follow the section "music". "»

    Download your purchases past - Apple Support

    In addition, you can always connect your new iPhone OS in your computer with iTunes to sync any music or media that are not an iTunes purchase.

    Sync your iPhone, iPad or iPod touch with iTunes on your computer via a USB - Apple Support

    See you soon!

  • Transfer of Whatsapp & Contacts Backup on old iPhone to new iPhone 4 SE but iCloud different accounts

    Salvation all of Indonesia.

    I hope you can help me on the above problem above and have a good solution step by step for it.

    Basically, what happened is that I just bought an iPhone brand new SE to replace my old iPhone 4. I especially want the history of cats Whatsapp for iPhone 4 to iPhone, so that's what I did yesterday:

    #1. I supported Whatsapp history on the iPhone 4 to iCloud by car.

    #2. I then downloaded and installed Whatsapp in the new iPhone is activated my old Whatsapp account there and discovered that there is no backup of Whatsapp to iCloud Drive.

    #3. Intrigued, I uninstalled the app SE Whatsapp, active Whatsapp account in the old iPhone 4 and saw that I indeed backed up.

    #4. I then proceeded to repeat the step #2 and once more, it there was not any backup detected the iCloud drive.

    There I stopped doing anything at the Whatsapp on two iPhones, until this morning, I decided to check on e-mail accounts used to iCloud by car for two iPhones, and to my surprise I found that I have use different emails for each iCloud, say the iCloud account on the old iPhone 4 (where the backup Whatsapp is located) is 'A' and the iCloud in the new iPhone is 'B '.

    Now what should I do? I can do:

    Option 1: Disconnect / remove account iCloud 'A' on the iPhone 4, then the newspaper with iCloud account "B", save the history of Whatsapp cats again, then download the backup of Whatsapp in the iPhone SE?

    or

    Option 2: disconnect / remove account iCloud 'B' on the iPhone, then connect with iCloud account "A", then download Whatsapp backup in iPhone SE? "

    A question:

    -A device, not the iCloud & App Store/iTunes email account must be the same or may they be different?

    Thanks for all the help

    You should do Option 2.

    The iCloud Apple ID may be different from the ID of iTunes/App Store.

  • I wanted to pass on my old iPhone 5 in order to do that I deleted my iCloud account out of this phone, or say that I thought, I went to delete e-mails and other things, it turned out that the data also has been deleted my iphone6 and my iPad... Help me pl

    I wanted to pass on my old iPhone 5, so I went to remove my account iCloud out of this phone, or so I thought. I went to delete the email, etc. out of this phone, it turns out that he has also deleted all my data on my iPhone 6, which is what I use, as well as on my iPad. What should I do now? Help please

    Don't know what you were doing.  If you removed real emails, then they are in your email trash folder.

    All you have to do is to restore as new iPhone before giving it away.

    Read this article:

    What to do before you sell or give away your iPhone, iPad...

  • My I pad is three years old. Always load up. It was very fast, but has recently begun

    I have apple I pad 4, he is three years old. OS 9.2.1 appliction10, 12.5 GB, available 3.8 GB capacity. It was very fast loading. Recently is seems to take forever. Several minutes.

    Try closing all your apps and force restart the iPad. This will affect all the data.

    Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close. Do this with all applications.

    Force now restart your iPad. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

    IF this does not help, after the return of more detailed information such as what do you exactly mean by it takes several minutes to load.

Maybe you are looking for

  • Match vs Apple-ITunes music (library iCloud)

    Is there a reason to maintain a subscription Match after Apple signed music to iTunes? the main reason that I had another match was to maintain access continuous songs "incomparable" (especially my own demos and stuff notcommercially available) that

  • I have an i phone 6 (9.3.1) I can disable burst mode?

    I get the burst mode, even though I type quickly once the button in photo taking!  I don't want this feature on my phone!

  • HPE 235f: Hpe 235f black screen

    I have a desktop HPE 235f. Going against my better judgment, I have improved the Windows 10 Office to try out it. Bad ideal. I started to havexecute problems. So I used one of my old recovery disk I did downgrade to Windows 7 Home. The computer worke

  • get a real of Editbox

    Hello I would get a real of an Editbox For example, I would type 10.51 and bring in my script. Right, now I get a string: "10.51. And I would like to convert it to a real use. How can I do? Best regards Frédéric

  • Partner account is no longer associated with my business

    I had a live windows, or something like it's called this week, account partner services Partner MS for the better part of 10 years. This weekend, this association has been removed. I was not informed of this by any entity Ms. Now I am unable to acces