HPE 235f: Hpe 235f black screen

Similar Questions

• HP Pavilion HPE h8 - 1213c: black screen of death because of the new graphics card (EVGA geforce gtx 960)

  I just bought a new card (EVGA geforce gtx 960) to kick some butt. But during installation, it seems to be held on a black screen of death? Not the most fun to see... in any case, I had asked the store clerk if it would work and he said to, but it doesn't seem like it does... Is there a new BIOS I should download or something? Any help would be nice...:.

  My computer is a HP Pavilion HPE h8 - 1213c

  The graphics card is an EVGA geforce gtx 960

  If you have both. You can use one or. PIN 8 can be used as a 6 pin as well.

  http://www.EVGA.com/products/ProductList.aspx?type=0 & Family = GeForce + 900 + Series + Family & Chipset = GTX + 960

  2 smaller cards use a single PIN 6. The rest use a single 8 pin.

• HP Pavilion Elite HPE - 400z CTO: H - RS880 - Μatx Motherboard BIOS Update caused crash, to see a black screen now?

  I have a desktop HP Pavilion Elite HPE-400z running Windows 7 (64), my computer was working fine, however I thought that I needed to update the drivers and things from the HP website.

  The first thing I installed was the following: H - RS880 - Μatx Motherboard BIOS Update

  That restarted immediately frozen mouse on a black screen. When I turn on the computer the lights and the fan turns on but the screen remains black. Their is nothing wrong with the monitor, it's light is on, but when turn light it just says: "monitor going to sleep".

  I went through these troubleshooting pages: http://support.hp.com/us-en/product/HP-Pavilion-Elite-HPE-Desktop-PC-series/4269972/model/4300925/do...

  http://support.HP.com/us-en/product/HP-Pavilion-elite-HPE-400-desktop-PC-series/4269972/document/BPH...

  without success.

  Any other suggestions of what I could do to fix this?

  Hello

  Disconnect the PC and press and hold power for 30 seconds. Remove and replace the battery CMOS. It's a $4 item. Now let's see what happens. If no joy, then try the steps above once again.

  If your PC support has been changed or modified then put it back in its original state.

• Black screen with a white flashing dashboard on the top left corner

  I try to use the recovery disks (four in total). I put the first disc in and it ran on F11 and it ran, then he asked me to assess extra and who ran very well. Then he asked for 1 system recovery disc and that went very well, last she asked me to put in disc 2 of the system recovery and all I got was a black screen with a related flashing on the top left corner of the screen and it did not run. So now I'm stuck, and the disk 2 and 3 did not perform. Help! I really don't want to spend three hours on the phone with HP. I have a HPE-470F, Windows 7

  I hope we can get it worked. Normally you do not press F11 when you use recovery discs. Not sure, but you may have triggered a step wrong using it.

  Follow the instructions here closely again with an attempt to recover:

  http://support.HP.com/us-en/document/c01867418

  Also as Dokie says-good luck! Let us know how it goes.

• Black screen problem.

  Hello!

  While I was watching a movie from Itunes on my iphone and took a screenshot. As I looked in my album, I ended up getting a black screen. There is a desire for this?

  

  I guess this is supposed to work this way because you don't own the rights to the film.

• iPhone 7 more stuck on black screen with the spinning wheel

  How can I fix it? I tried to reset, go into DFU mode, recover from iTunes. Nothing works. I can't use iTunes because he wants me to grant access from my iPhone is not responding. DFU mode doesn't work, the screen does not any combination of seconds I hold down the buttons to. This has happened more than an hour. Should I just wait for the battery to die? Please note that I do not live in the United States or the U.K. or anywhere with an Apple Store, I can take it to.

  Thank you

  Hello! I think that I may have a solution to our problem of the black screen with the circle of rotation.

  I came across this post today because my iPhone all nine 7 (which I've upgraded to the latest ios) also got stuck on a black screen with the circle of rotation. I tried to update some of my apps, when suddenly the screen froze. I clicked once on the home button and the screen become black with the subsequent appearance of the circle of rotation.

  I have tried everything - simultaneously press the home button and power (does not work). connected to itunes to do a restore (it won't let me not because my "find my iPhone" was turned on - but I could not turn off because my phone was insensitive).

  In any case, a very useful Mr. Damon (Senior Advisor to Apple) helped me via chat to solve the problem.

  Here's what I did:

  1. make sure that your iPhone is disconnected from the socket or the computer.

  2. hold the POWER button and the VOLUME DOWN button at the same TIME. If it works, the screen should turn off almost immediately.

  3. connect your iPhone to the computer. (when I have connected to the computer, my iPhone automatically on and was ready to be reused).

  The steps below are for those whose iPhones did not turn with the above steps. The following steps are designed to allow you to disable remote your 'find my iPhone', so you can do a manual restore from iTunes.

  4. go to www.icloud.com.

  5. click on Find iPhone

  6. given that the phone is turned off already, he won't be able to find it. On the top bar, click DEVICES.

  7. click on your iPhone.

  8. click on "delete account".

  9. go into your itunes and do a restore.

  I did have to do steps 4 to 9 more, because as I said, my iPhone automatically activated after step 3.

  This really worked for me. I hope this works for everyone else too! Have a great day!

• Mac mini black screen after upgrading to sierra

  Hello!

  My probleme:Mac Mini end 2014 black screen to start immediately after the upgrade of Sierra.

  Thanks for your help.

  Kentr0n

  Is there anything on the black screen (boot) at all ever?

• iOS 10 wheel black screen

  Been using iOS 10.0.1 for about a week on an iPhone 6 and it is buggy. The questions below are only occurred since the upgrade to iOS 10. Please fix in the next version or offer a solution.

  1 random black screen with the spinning wheel. The upgrade went very well, so not this black screen. But at least every day my phone stopped responding and displays a black screen with the spinning wheel. After 5 to 10 seconds, I invited me to enter my password as if the phone has rebooted. I'm not the only person knows - and even managed to capture the image below.

  2 - I activated the option 'open finger rest' in respect of the accessibility of the home screen, but this does not always work. Once again, about once a day, to rest my finger to open the results in me being invited to press the home button to unlock. Whenever this happened I checked and confirmed that 'rest finger to open' has been enabled.

  

  Thank you

  I have the same problem.  3 co-workers have the same problem.  I opened a discussion with the Apple support, however, they said it was just my phone and that I should backup my phone and do a factory restore.  This is pretty extreme, especially considering that 100% of my immediate peers with iPhone devices 6 face the same frustration.

• MacBook (2010) starts with black screen with flashing Apple logo

  I recently got ahold of a Macbook Pro 2010 running very slow so I did a reinstall of the operating system (which was a living nightmare, Macintosh is not as easy to manage as it was at the time of PowerPC) once I got to the top and running, I decided to upgrade to the latest version of El Capitan (an update (not an upgrade I already had a version out there) once I rebooted and let the computer do its thing he began to start up normally, but after finishing the progress bar, he went to a black screen (with the screen still on) that flashed the boot from time to time Apple logo. I forced shut down the computer and start in safe mode with success (that's how I'm typing this post now).

  Thanks in advance.

  When you reinstalled, did you remove any third-party system before reinstalling.

  A Mac that runs in Mode without failure, but are generally not normally indicates some incompatible system changes.

  Software common problems are things that are intended to clean, protect, optimize, accelerate, or otherwise maintain your Mac.

• Black screen for 10 seconds and then lock screen after ios 10

  I am facing a problem where my iphone 6 randomly shows a black screen with a loading circle in the Center for about 10 seconds and then wakes up to the password lock screen.

  Called in support and they mentioned to install ios 10 via itunes instead and a new device settings and do not restore the backup to diagnose the problem.

  Is anyone else having the same problem? Any suggestions that might be faster than the one mentioned by the Apple Support

  Colleague and I have this specific question. Getting really boring. The app I was on lost its place, its similar accidents are happening

• I need help on my macbook pro i5 13inch mid 2012 model when I open all black screen

  I stopped just my macbook pro, when I open all the black screen but it has power... can I bring it to apple store to fix. How will they charge?

  The cost will be dependent on what may be wrong.  It could be the GPU or the screen is who is several hundred dollars.  It could be the connection of the screen, which will be very little costly to repair or even for free if only the connection is loose.

  Foe a final quote, bring the product to an Apple store genius bar.

  Ciao.

• Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Hi, I bought a new Apple MacBook Air yesterday of FNAC in Geneva, and when I got it home I couldn't go beyond the black bar. In the end, I got a white circle with a slash and a black screen. Please tell us what to do. Thank you.

  Bring her back. It's new, it's at the shop for sorting or replace it, not you to try to fix it.

• Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Please I have iPhone 6 more stopped working all of a sudden shows apple logo then black screen I can solution?

  Have you tried to restart the iPhone by pressing and maintaining the sleep/wake and home buttons?

• phone calls disconnected with black screen cannot close

  my iphone screen 6 turns black while talking and calls disconnected - cannot disconnect caller or turn off the phone

  I cleaned the (sensor area) and removed the protective shield - I also 'reset statistics' under cell which worked for a few days but now turns black screen while calls speaking, be disconnected or conversations break up - can not turn off the caller's phone - I have the latest update 9.3.5

  georgefromma wrote:

  I removed the protective shield...

  "Protective shield"?

  Its existence on your iPhone is maybe a problem.  You can try to use the iPhone without this "shield" because it can hinder the iPhone proximity sensors.

• 10.11.6 - black screen with cursor in security update 2016-001

  Hello

  After installing safety day 2016-001 10.11.6 and reset as part of the installation process, I get a white apple logo, the white line will blink twice and then I get a black screen with white cursor. The cursor moves with the mouse but nothing happens and I do not get the login screen. This happened on my MacBook Pro and my iMac (retina 5K, end of 2014) (2015).

  Any help is greatly appreciated.

  Best regards

  Tom

  Same problem with iMac 5K, no problems with MacBook 2016 if. Very glitchy update indeed.