My Acer Aspire V3 - 571 G have a square on the screen where the mouse does not respond.

Similar Questions

• I have a problem with the touchpad does not not on Windows 7.

  Original title: help. My touchpad scroll has stopped working.

  I have a laptop of Acer Aspire 5750z-4830. Touchpad scrolling does not scroll when I try. How can I put it to the top after that I took it to be repaired? Since I got it home now it won't work. And I don't have the cd to reinstall.

  Hello

  Thanks for posting your question in the Microsoft Community forum. I understand that the touchpad scroll has stopped working.  I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  This problem may occur if there are some differences in the file system or the associated scroll Touchpad drivers. Follow these methods:

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  You can also follow this link and check if that helps.

  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 3.

  Check if control panel touchpad mouse is enabled or not. Follow these steps.

  1 - click on 'start '.

  2 - Select 'Control Panel' click the icon of the '' mouse. '' If you don't see the mouse icon, select Classic view of the control panel.

  Tab 3 - Click the "peripheral" in the window that appears. Select the 'enable '.

  4 button - Click on the 'apply' and select 'OK '.

  Method 4.

  Alternatively, you can also try the following steps.

  1 - Locate the "Fn" button in the lower right or left side of the keyboard of the laptop. The 'Fn' key has different text color on it or the key itself is a different color.

  2 look for the function key (F1-F12) on the top of the keyboard that disables or active the touchpad on the laptop. The key usually has an icon that looks like a touch pad with a finger touch she or a touchpad with a diagonal line through it.

  3 - Press "Fn" both the touchpad function key simultaneously to reactive the touchpad on your laptop. Move your finger on the touch pad to make sure it works. Press to disable the touchpad again at any time.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• I have a problem with the Bitlocker does not not after entering the password.

  Original title: my bitlocker encrypted Drive not respoding after entering the password.

  Hello

  I tried to block my external hard drive with bitlocker, but unfortunetly got encryption interrupted before finishing because I accidentally unplugged the hard drive, I use windows 7... And now when I enter the password the bitlocker stops responding until I unplug the external drive, I tried to decipher the drive using bitlocker repair tool in cmd, but she also is stuck at 29% every time if I managed to get some data back but not my whole data.

  , I just want to know that is there any way to recover my entire data or unlock the drive?... .Please help!

  Thank you

  I'm sorry to say, but you have made two big mistakes:

  (a) you forgot to backup your data regularly, e.g. once per week.
  (b) you have not backed up your data before making a major change, such as when your data encryption.
  There is a small chance that you can repair the damage with the found here BitLocker Repair tool:
  http://TechNet.Microsoft.com/en-us/library/ee523219 (WS.10) .aspx
  If this isn't the case, then you will have to deal with this disaster as a harsh reminder that regularly back up the files is not an option but a 'must '.

• I have PS 12 elements, the program does not recognize the RAW format of my new Canon 7 d mark II camera... any suggestions...?

  My PS elements 12 is up to date, and the program says that my version of RAW cannot be recognized. I just bought a Canon 7 d Mark II. It wasn't a problem with my Canon 7 d uggestions or ideas are appreciated... Thank you

  The new camera requires Camera Raw 8.7. Photoshop elements 12 will accommodate only up to 8.5. You will need to upgrade Photoshop Elements or use the DNG Converter to create DNG copies that you can use with what you have.

• do I have wacom tablet or other brand draw on my pc? the mouse does not work.

  been trying to use the paint on my computer Windows vista, Home Premium edition, but as you know drawings do not well: irregular line, colors overshot, etc., honestly speaking, I need to get the sometype of wacom tablet or other brands that blow my mind early, you could send thoughts on this subject to me, evil go to "The Art Institute this Summer" I want to just be prepared. Thanks for help past and keep strong!  PFC Brian Noble, U.S.Army veteran

  Hello

  ·          What is the problem with the mouse?

  ·          What is the mouse works on another application?

  ·          What is the number and model of the mouse?

  ·          When did it stop working?

  To understand more about paint used in Windows Vista, you can consult the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-paint

• I have a problem with the Aero does not.

  Original title: Aero do not work

  Aero will not work on my pc cause my graphics card is an Ati Radeon 9200 series and doesn't support Aero cause the producer do not release the update. I'm looking for a solution to make aero work? Thank you.

  Hello Nello,

  The support of the ATI Radeon 9200 series to only Windows XP drivers. These drivers do not support WDDM 1.1, and therefore will not support the Aero features. I've looked everywhere and there seems to be no work around that. In this case, I would say that you can buy a new graphics card or contact AMD support for assistance:

  http://support.AMD.com/us/contacts/pages/global-technical-support.aspx

• Acer Aspire E1-571: current password for boot Acer bios menu

  Hello

  I'm using a computer laptop acer aspire E1 - 571 and I want to enter the boot menu by pressing F2, so he asks the current password that I don't know. Help, please

  Hello

  This is the HP forum, you may need this repost on the Forum Acer or communicate with their help, however, if you enter an incorrect password 3 times, you receive a stop code?  If you do, post back with the code.

  Kind regards

  DP - K

• my mouse on my laptop does not respond correctly, going where ever he wantsa go and don't type wht words I will have a few seconds delay, can't play games or do much his frustratjing

  the mouse does not well, typing is slow and have to wait for the words to catch up, internet or disable, this has just begun, I can't select things very well, it takes time to play a game or write a letter

  Hi Kandikane,

  A. are you referring to the touch pad or external mouse?
  B. What is a USB or a wireless mouse?
  C. who is the manufacturer of your computer?
  D. recent changes made on your computer?

  You can try to update the drivers and let us know the result

  1. click on Start.

  2 type devmgmt.msc in the start search box and press on enter.

  3. right click on the driver, and then choose Update.

  Previous post: the result.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Scalability of memory Acer Aspire V3 - 571 G - 9686

  Hello

  There are about 1 1/2 year, I bought an Acer Aspire V3 - 571 G-9686. It came with 6 GB of RAM setup in this way:

  SPD EEPROM (DIMM0) information

  Manufacturer: ston

  Part No.: 56X64D3S13C9G

  Serial number: 146718E64C0018E4

  Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

  Format: IMM (67.6 x 15)

  Size: 2048 MB (ranks 1, 8 banks)

  Buffered module: No.

  Registered module: No.

  Module SLi Ready (EPP): No.

  Module XMP: No.

  Module XMP 2.0: No.

  Width: 64 - bit

  Ability of Error Correction (ECC): unspecified

  Prefetch buffer: 8 bits

  Manufacturing: Week 10, 2012

  Temperature probe: no

  Heat spreader: Yes

  Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

  Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

  TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

  -------------------------

  Information SPD EEPROM (DIMM1)

  Manufacturer: your technology

  Part No.: I1C1674EV

  Serial number: 000018E64C0018E4

  Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

  Format: IMM (67.6 x 15)

  Size: 4096 MB (2 ranks, 8 banks)

  Buffered module: No.

  Registered module: No.

  Module SLi Ready (EPP): No.

  Module XMP: No.

  Module XMP 2.0: No.

  Width: 64 - bit

  Ability of Error Correction (ECC): unspecified

  Prefetch buffer: 8 bits

  Manufacturing: Week 23 of 2012

  Temperature probe: no

  Heat spreader: Yes

  Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

  Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

  TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

  ------------------

  So, it's a 2 GB module and one 4 GB. Different manufacture.

  My question is:

  What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB?

  Thanks in advance for any help.

  Kind regards.

  Hello

  You wrote:

  "What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB? »

  In fact, you have 2 sticks of memory 667 MHz. In dual channel, it means to 1333 MHz.

  Specifications of aspire V3 - 571 G-9686:

  Chipset: Mobile Intel HM77 Express.

  Processor: Intel Core i7-3632QM

  Integrated graphics card: NVIDIA GeForce GT 640M - 2 GB RAM DDR3

  You can upgrade up to 8 GB (2x4gb) and Max frequency 1600 MHz. For example: If you install a single stick of 4 GB - 1600 MHz, it is single-channel: 1600/2 = 800 MHz.

• Acer Aspire V3-571, a continuous beep on startup

  Hello

  I have an acer aspire v3 - 571 that keep a beep on startup. I can get into Windows 7 by pressing "ESC".

  However, after I enter Windows and use my browser (mozilla firefox), the Web page is scrolled automatically at the end of the page. Despite manually by pressing the scroll bar and bring the scroll bar to the top of the page, just wedpage keep automatic scrolling at the end of the page.

  Initially, I suspect my wireless mouse was defective, but even after changing for wired operation smile, the problem persists.

  Now I am suspecting if the problem is the built-in trackpad or the built-in keyboard key 'END '. Please en; ighten me on what I need to do to solve the problem above.

  If it is a sound signal and go to page END...

  There are many more to check, take a look at your 'End' button, use a cloth with compressed air to clean up a bit.

• ACER Aspire E1-571 initialize problem.

  Hi everyone, I recently bought a new hard drive for my acer Aspire E1-571 gor because the old one (500 GB hitachi) "crushed". Then I did today, it's a WD scorpio blue 2.5 "320 GB. I have installed the new drive, run an installation of windows 7 x 64 ultimate edition of windows install I divided on 2 partitions, formatted and installed the system disk. Installation is completely normal and fast but the laptop keep coming at startup screen ACER logo then restarts after the instalator finished and did the final restart before you run the Windows for the first time and again and again and again to infinity so I reinstall windows once more and it's the same thing. After that, I got the new drive from the laptop and put it in another laptop of mine an Asus and windows proceeded to the desktop without any problem. So my question is what is the case, do I need a disk for acer hitachi because no other brand will not work with it or what? or maybe its a sort of Matherboard problem with the disk?
  Thanks for the help!

  Hmm, how about uefi? After a few readings in a thread, it seems that bios is one of messing around.

  see this link; http://community.Acer.com/T5/notebooks-netbooks/Windows-7-UEFI-install-on-aspire-E1-571/TD-p/50201

  or perhaps this, simple and could be much more useful, http://community.acer.com/t5/Notebooks-Netbooks/Installing-Windows-7-on-acer-aspire-E1-571G/td-p/930...

  some posts here might be useful (as I browse some of them, some say install win7 on GPT with active uefi)

• Installation for Officejet 4500 disk crashed in Acer Aspire E1-571

  I have a laptop Acer Aspire E1-571 with Windows 7 64 bit and has recently purchased the officejet 4500. I used the disc that came with the printer to install the software and during this process, an error box emerged which didn't say anything other than "error". Then I was asked to restart my computer and do, my computer could not restart and had to start itself in system repair mode to correct everything that had happened. It works fine now, but I don't know if I should try to install the drivers from the HP website or not, because I would not let this happen again.

  I did not at all connected USB and configuration was going well until the error message occurred.

  Hi Lulzpup,

  Download and run the installation using the software on the link below. Let me know what you find?

  Driver and HP Officejet Full Feature software

• How to activate Bluetooth for Acer aspire E1 - 571.

  Original title: Bluetooth for acer aspire E1 - 571

  I recently got a new computer and am wondering how to activate Bluetooth. It is an Acer Aspire E1 - 571 equipped with windows 8 whenever I go settings > change PC settings > wireless, Bluetooth button doesn't click or drag. If there is a way for me to turn it on can you let me know? And also, if there is a shortcut to turn Bluetooth on and off could you let me know about it too please, thanks.

  Hello

  Acer Aspire E1-571 seems to have integrated Bluetooth connectivity. You can press Fn + F3 to activate the Bluetooth on the computer.

  You can also check with the Support of Acer and see if the keys are located to activate Bluetooth.

  We can also refer to the articles and check if it helps to activate Bluetooth.

  Add, remove, and manage your devices and printers

  Why Windows is not find my wireless device?

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and updates of firmware for the computer.

  Windows Update: frequently asked Questions

  You can also visit the Acer support website to install the latest version of the Bluetooth drivers and check.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• Acer aspire V5 571 P - stop with power cable removed

  Acer aspire V5 571 P - when cell phone fully charged and power cable removed from the laptop shuts... Help?  Thank you.

  Looks like there may be a problem with the internal battery. Battery reset press and hold the button for 4 seconds. Then, charge the battery and see if it works when unplug you the unit. If it is not the case, contact technical support to set up the repair.