My Aero glass iam does not not on vista ultimate sp2

Similar Questions

• The Aero Peek feature does not work on my computer that I've recently upgraded to the version of Win 7 Home Premium 32 bit.

  After you have installed Windows 7 Home premium, I noticed that the aero peek feature does not systematically after a fresh reboot upward. Sometimes when I turn on my computer the aero peek feature turns on immediately and works well. On other occasions when I turn it on it just does not come to the top. I had the box customize and found the checked enable aero peek. Still aero peek doesn't work. So to summarize if aero peek turns on it works fine. However, it does not illuminate whenever I boot my machine eventhough that the box is checked. Please notify.

  Try this: launch REGEDIT, navigate to HKEY_CURRENT_USER and make sure that EnableAeroPeek is set to 1, rather than 0.
  It can help.

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• Photosmart premium C309a to flat glass copy does not work, please help.

  I get the error message 'Original Jam' and ' reload the document and then restart work ", when I try to copy from the glass flat.

  Please help if you know how to solve this problem as soon as POSSIBLE. Thank you.

  Hi, I just took one of these all in printers for my office on site, so I wanted something that does everything in one package.  For the price with discounts and rebates, I couldn't let this go.  While I was in the store, the printer he had the same problem as described, but I thought he was just manipulated man so I went and picked up one.  After setting up this morning and going through the features, I continued to get this message when I tried to scan, copy or fax:

  "Original Jam".

  "Reload the document, and then restarting the work.

  It seems that the printer does not know when to stop once the feeder is empty and has no more paper to deal with.  After playing with the printer to search for clues, I opened the top paper feeder and glanced at the mechanism that pulls the paper in.  On the cover there is a picture that shows how to get out of gear.  I managed to pop the mechanism as shown outside.  When I went to reinsert the gears, it does seem easy, but after some tests of attention, the seat of gears in which they must be.  You will notice that the left rear of the printer, denoting the set of gears, there is a latch-hook with equipment which still supported upward.  I have to be down, but mechanically, it is designed to be in the air in the non-operational position.

  After I reinstalled the paper training gear set, I double-checked all the features of the printer and it seemed to work fine.

  Suggest users try to remove and reinstall the mechanism to see if this corrects the problem.  Don't forget, the latch with a gear on the top left rear of all remains sustained upward, so it's normal.

  I hope this helps!  God knows that HP will not help you when you need it.

  I had the scr * ed on their PC HP Pavilion Slimline 3020n.  HP is fully aware of a motherboard design flaw that they neglect to difficulty.  They recognize the design defect and continue to deliver parts until exhaust you the warranty!

  -Glenn

• Satellite L30: The sound does not work on XP Sp2

  Hi, sorry but I cannot well English.

  I have a problem. I do not have CD with drivers, but I download from the toshiba site.

  Yesterday, I reinstal windows, then I install all the drivers and I have a problem with the audio drivers.
  In Device Manager is all good, his system is activated, drivers of instalation, I have no problem. But sound does not work.

  You have any ideas?

  Hello

  If the sound does not appear on your laptop, you must first check the volume control on the side of the laptop. Turn it up to the max level.
  Then check the sound devices and audio in the control panel if any controller is disabled or turned to the lower floor.

  Additional connect headphones and check if you can hear something.

  By the way: have you installed the correct drivers? On the Toshiba page, you will find two different sets of portable Satellite L30

• Satellite P300D-15O - display drivers does not-XP/Vista

  Hi all

  After buying this Satellite P300D-15O tried several times the reinstallation of operating systems: Windows XP Pro, Windows Vista x 32 and x 64 version, but does not display drivers offered by Toshiba downloads: it runs only the Windows standard vga drivers after you have installed and not working drivers for AMD/ATI HD3470.

  Max resolution is 1152 x 864. The laptop has been pre-installed with Vista Home Premium and good work and resolution of 1440 x 900 ATI drivers; but I want a new installation on my own without any addition of pre-installed software from McAfee/Google etc - The Toshiba telephone Customer Service can't help for this problem, they have NO answer, :(! Is there a solution with the inf files? Can anyone help!

  THX, endo

  Hello

  In my opinion, make you a huge mistake. Laptop with factory settings is perfect set up and all hardware components are working properly. OK, I understand you don't want to use some additional preinstalled software, but you must understand that you don't have to do it.

  I have absolutely the same option about it than you and the first thing I did with my Satellite P200D is to remove all the software, I don't want to have installed on the system.

  You can do the same thing. Go to the control panel > programs and features and then remove all the additional software. Later, install your favorite software and be happy with it.
  I do the same thing. Why install OS Vista own especially if you ve already paid for a Vista license.

  What do you think of this?

• Re: Qosmio F30-131: remote control does not not with Vista Ultimate

  Hello!

  I just installed Vista Ultimate but my remote does not work.
  I reinstalled everything in the right order as written in the command file install on Toshiba Homepage but its always answers don't not under Vista.
  I can just turn on my laptop when its off the remote control.

  Anyone know what to do?

  (PS: I do not have my Toshiba restore CD for Windows XP MCE)

  Hello

  You reinstall the remote control manager? This utility enhances support for a remote control on your computer.
  How about Value Added package? There is a new version available. Try to update it too.

  But back to the basics, the Qosmio F30-131 belongs to the series of PQF30E. Did you choose the drivers for this series?

  However, this laptop has been delivered and pre-installed with Win MCE. Can this remote works only with the XP version of Windows Media Center.

• Satellite Pro L40 - wireless adapter does not work - Vista

  I recently had some problems with my laptop.
  A couple of weeks, I put in a disc of OpenSuse.
  It's not stable anything, but locked me out of my original Vista operating system.

  I reinstallled Vista Home Basic, but there are a few problems.
  Mainly, my wireless adapter does not work.

  When I flip the button to turn it on nothing happens and it is not recognized in Windows.
  I installed Atheros Driver, but still nothing happens, light is not yet.

  Any advice?

  Hello

  First check the device-> network adapters area manager
  You see the WLan card? Or the unknown device appears?

  If there is an unknown device, then the WLan driver has not been installed correctly or you tried to install a driver badly these two options are possible.

  Remember that your wireless network card? Maybe it was a Realtek WLan card?

  If it's a Realtek WLan card, try the WLan driver from the Realtek website and look for 802.11 g (RTL8187B) chip or you will simply check the page of the European driver Toshiba too the Realtek WLan driver also appeared on the Toshiba page

• T400 - 6474 keys does not work - W7 Ultimate

  The b, n and dows arrow keys does not work. I tested with two different kayboards FRU T 42, 3230. I reinstalled the keyboard driver without solving the problem. Any suggestion. Kenneth in Stockholm

  Problem solved after update of the system. k

• Dv5 does not load Vista, failing hard drive test

  I have a laptop HP DV5 with Vista - 2 years and more under warranty.  He had some problems with Windows Update error codes, I did a system restore to a point a little backward.  This does not solve the problem, so I tried to cancel restoring the system back to the State of our days.  This was fine, but then the system locked up when he tried to restart itself-it has attempted to restart for 45 minutes and got nowhere, so I turned off.  This throw Windows completely, as the system restore was not full yet, so now that my computer will boot the HP logo and start up options, but then get hung up trying to load windows (I have a black screen with a scroll bar down cycles endlessly with Microsoft Corporation written below)

  Bottom line - I can't get the computer to boot windows, and system recovery does not work.  Tried directly from the hard drive and vain and ordered HP-put one disk disks this morning, once removed from the HP screen, I get the bar "Windows loading files" at the bottom, which ends in about a minute, but then it just goes back to its normal load upward, with the scroll bar and Microsoft Corporation at the bottom of the screen.  So I can't open basically even the system restore window.

  I just ran the self-test of the primary hard drive and had hard disk Test do not.  I'm not particularly computer saavy (I didn't know that to do this test in reading this forum), if anyone can tell me what I should do next?  I don't want to go somewhere and get screwed!

  Thank you!

  -Becky

  Hi Becky,

  The result of the primary Hard Drive Self Test means your hard drive is defective and must be replaced.  It is the HARD drive in my dv5.

  http://www.Amazon.co.UK/320GB-Scorpio-WD3200BEVT-SATA-5400rpm/DP/B0013E0A0M

  Hard drive replacement is not difficult (generally remove two screws from the cover of the HARD drive on the bottom of your laptop, remove a futher two screws holding the disc in place then pulling on one leg to lift the reader.  Then unscrew the metal casing around your old drive - often called the caddy drive - attaching to your new drive, insert the new drive, fix it with two screws and replace the cover.  Then simply insert your recovery DVDs to load Vista on your new drive.  Here is a Youtube video showing this.

  http://www.YouTube.com/watch?v=8U23F8JuKKE

  I hope this helps.

  Best wishes

  DP - K

• code 80070020__could does not update vista

  When I tried to installed an important update it keeps failing

  http://support.Microsoft.com/kb/883825

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  If the above does not solve the problem, repost in the appropriate Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• XP does not see Vista, but Vista see XP...

  Articles:
  (1) - 1pc with Windows Xp
  (2) - 1pc Windows Vista
  (3) - Linksys router

  First of all, I tried to do a network (connection) between two pc's (machines).
  The problem is that the pc of Windows XP does not see files and a Windows Vista-based computer, however, the computer Windows Vista see Windows XP machine.
  So in practice, it works only on one side. I tried to ping the Vista machine on my XP machine and it works. (succesfull 4 and 0 failed)
  I also tried to look on Google and this forum, but I can only find the opposite of my problem (XP Vista instead of XP Vista).

  Thank you very much.

  Okay, take a look at this article and see if it gets you on track: http://www.howtogeek.com/howto/windows-7/share-files-and-printers-between-windows-7-and-xp/ 
  -B-
  http://www.officeforlawyers.com
  Author: Guide to counsel for Microsoft Outlook

• Audio does not work, Vista OS

  I woke up this error message at startup: Driver Support has stopped working.  A problem causing the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.  I looked for drivers, found Slimware & bought their drivers download.  When I did, my audio stop working.  After spending hours with their Helpline, it still does not work, so I asked for a refund & uninstall their software.  Does anyone have any help?  The speaker on the bottom right has a X next to it.

  Hello

  You do not 3rd use programs such as driver Updaters, tune up Utilities and registry cleaners, optimizers, etc..

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  Driver downloads:

   

  Acer:

  http://us.Acer.com/AC/en/us/content/drivers

   

  ADVENT:

  http://www.adventcomputers.co.UK/product-downloads

   

  Alienware:

  http://support.Alienware.com/Support_Pages/Restricted_Pages/driver_downloads.aspx

   

  ASUS:

  http://www.ASUS.com/support

   

  Dell:

  http://www.Dell.com/support/drivers/us/en/19/ProductSelector

  eMachines:

  http://www.eMachines.com/EC/en/us/content/drivers

  Fujitsu:

  http://www.Fujitsu.com/us/support/

  Gateway:

  http://us.gateway.com/GW/en/us/content/drivers-downloads

  HP:

  http://WWW8.HP.com/us/en/drivers.html

  Lenovo:

  http://support.Lenovo.com/en_US/downloads/default.page#

  LG:

  http://www.LG.com/us/support/software-manuals

  Samsung:

  http://www.Samsung.com/us/support/downloads

  Sony Vaio:

  http://eSupport.Sony.com/Perl/select-System.pl?Director=driver

  Toshiba:

  http://support.Toshiba.com/drivers

  See you soon.

• Does not work Vista startup repair cannot repair, System Restore cannot repair.

  I have a Dell Inspiron with Windows Vista. On commissioning, it is said: "Windows could not start. A recent hardware or software change might be the cause. "then offer to 'Launch Startup Repair' or 'start Windows normally '.

  When asked to boot normally, it tries to start, but broken, return back to this page.
  When he was asked to run the Startup Repair, it opens the program scans the system for several minutes and then says "Startup Repair cannot repair this computer automatically.

  When we click on diagnostics and repair details, it is said:

  "Last startup successfully: 03/10/2011 15:42:52.
  Number of repair attempts: 8

  Details of the session
  Drive system = \Device\Harddisk
  Windows directory = C:\Windows
  AutoChk run = 0
  Number of root causes = 1

  The test is performed:
  Name: Search for updates
  Result: Completed successfully. Error code = 0 x 0
  Name: Drive for System Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Troubleshooting disk
  Result: Completed successfully. Error code = 0 x 0
  Name: Metadata for the drive Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0

  Root cause found:
  Startup Repair tried several times but still not determine the cause of the problem. »

  If not, we can look at the advanced settings:
  System Restore = "no restore point created the disk of your computer system. To create a restore point open System Protection.
  Windows complete PC Restore = "a valid backup location is not found. Windows cannot find a backup on this computer. »
  = Windows Memory Diagnostic tool does not solve anything when parsing
  Command prompt
  Reference Dell Factory Image Restore = not tried but am avoiding wiping all your own hard drive for as long as possible...

  He's not in Mode safe, and I don't know what is happening. It happened when I shut it down (holding the power button down) update that it had frozen.
  What should I do? Thank you.

  Hello

  Method 1: I suggest that you do the startup repair using the Windows Vista installation disc and check if it works.

  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

  a. Insert the installation disc.

  b. restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  c. If prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. choose your language settings, and then click Next.

  e. click on repair your computer.

  f. Select the operating system you want to repair, and then click Next.

  g. in the System Recovery Options menu, click Startup Repair.

  See: How can I fix a startup (startup)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-fix-a-boot-startup-problem

  Method 2: If above method fails, then run the command chkdsk WinRE (Windows Recovery Environment) and check if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: Select command prompt from the system recovery options and follow the mentioned below as follows:

  Type the following command and press ENTER.

  Chkdsk /r

  Note: Chkdsk /r command erases / corrupted hard disk data corrections. Some of your personal files/data may be erased.

• CD/DVD not detected or does not, OS-Vista (Home), SP1.

  Laptop HP Pavilion DV700, OS Vista Home Premium, SP1, CD/DVD not detected and does not. Please advice. Thank you.

  If the CD is not autostart, try to look at its contents in Windows Explorer. Also note that you posted the answers Sandbox Forum, which is for the test, not for technical questions.

  Stefan Blom, Word of Microsoft MVP