My antivirus McAfee crashes when executing a complete sca

Similar Questions

• 11.1.1.3 DRM Blender crashes when executing the batch

  We are with a certain frequency see crashes when we execute a batch of our hierarchy Blender counts in our version of work.  When this happens to logging in the client appears to hang everything without much possibility of starting any work.

  If anyone has experienced this?  The hierarchy has any 26 000 nodes and some 10 properties to each node.

  Does anyone have experience crash/lockup DRM with good handling issues or troubleshooting tips?  I imagined we might see a kind of deadlock after an http timeout, but I see no information in the newspaper, I appreciate any basic troubleshooting tips.

  
  Agnete

  Hi Agnete,

  If you see crashes then I would check the the application event log on the application server main DRM for the problems with DRM engine treats when problems are encountered. If there are fatal errors with DRM engine treats and then I saw this connection cause problems.

  If the mixture is run by the customer of the batch, make mistakes returned in the log for the client to batch?

  Concerning

  Craig

• Exception (or crash) when executing a XmlModify with multiple delete express

  Hi all
  
  The following code snippet looks like my path of execution of update of the nodes in a document.
  

      XmlManager manager = DbController::getInstance()->getManager();
      XmlContainer container = DbController::getInstance()->getContainer();
      XmlTransaction mainTransaction = manager.createTransaction(DB_TXN_NOWAIT);
      XmlQueryContext queryContext = manager.createQueryContext();
      XmlTransaction childTransaction = mainTrContext->getXmlTransaction().createChild();
      XmlDocument document = container.getDocument(childTransaction, "mydocdir/docname", 0);
      childTransaction.commit();
  
      XmlValue nodeXmlValue;
      XmlQueryExpression docNodeExpression = manager.prepare(mainTransaction, "/acquisitionProtocol", queryContext
      XmlResults resultList = docNodeExpression.execute(mainTransaction, mainTrContext->getDocument()->getXmlValue(), queryContext
      if (resultList.size() > 0)
      {
          resultList.next(nodeXmlValue);    
      }
  
  //                        XmlValue nodeXmlValue(mainTrContext->getDocument()->getXmlDocument());
      
      XmlUpdateContext updateContext = manager.createUpdateContext();
      XmlModify modifier = manager.createModify();
  
      XmlQueryExpression nodeQueryExpression = manager.prepare(mainTransaction, "./location", queryContext);
      modifier.addRemoveStep(nodeQueryExpression);
      XmlQueryExpression nodeQueryExpression = manager.prepare(mainTransaction, "./id", queryContext);
      modifier.addRemoveStep(nodeQueryExpression);
  
      nodeQueryExpression = manager.prepare(mainTransaction, ".", queryContext);
      modifier.addAppendStep(nodeQueryExpression, XmlModify::Element, "location", "yves/test", 0);
      modifier.execute(mainTransaction, nodeXmlValue, queryContext, updateContext);
      mainTransaction.commit();

  When I run the modifier (2nd last line), it throws the following exception or crashes:
  

  DBcursor->get: DB_READ_COMMITTED, DB_READ_UNCOMMITTED and DB_RMW require locking
  Exception code: 5
  Error text:Error: Invalid argument File: NsEventReader.cpp Line: 828
  DbErrno: 22

  The problem occurs when you add more than one expression to remove the object to change. If I use delete as a single expression, the code works correctly.
  However, I can add many add expression without problems.
  What I'm doing wrong here?
  
  
  Thanks in advance
  
  Yves
  
  Published by: ywillems on December 10, 2008 07:55
  
  Published by: ywillems on December 11, 2008 05:37
  
  Published by: ywillems on December 11, 2008 07:05

  Yves,

  The problem is, I believe, tied up in a change quite complex, I do it for the current development tree (2.5). Here's yet another patch for 2.4.16 that would deal with this specific problem. I am not sure 100%, because there might be an effect of skin of onion here and further changes may be needed. The obvious solution for you is to use separate instances of XmlModify or rewrite your XmlModify code to use XQuery Update directly. The latter is preferable since XmlModify will eventually disappear.

  Best regards, George

  --- dbxml-2.4.16-original/dbxml/src/dbxml/Modify.cpp
  +++ dbxml-2.4.16/dbxml/src/dbxml/Modify.cpp
  @@ -286,10 +286,9 @@
   {
        unsigned int count = 0;
  
  -     XmlQueryContext qc(((QueryContext&)context).copy());
  -
        ModifyStep::Vector::const_iterator i = steps_.begin();
        for(; i != steps_.end(); ++i) {
  +          XmlQueryContext qc(((QueryContext&)context).copy());
             count += (*i)->execute(txn, toModify, qc);
        }
  
  @@ -301,11 +300,11 @@
   {
        unsigned int count = 0;
  
  -     XmlQueryContext qc(((QueryContext&)context).copy());
  
        toModify.reset();
        XmlValue value;
        while(toModify.next(value)) {
  +          XmlQueryContext qc(((QueryContext&)context).copy());
             ModifyStep::Vector::const_iterator i = steps_.begin();
             for(; i != steps_.end(); ++i) {
                  count += (*i)->execute(txn, value, qc);
  

• Explorer.exe & Dr. Watson continually crashes when executing the Dragon Naturally Speaking program... with the following error messages _

  Win XP Prof SP3 using: X 2 AMD Athlon 64 Dual Core processor 5200 + w / 4 Gig of Ram

  Info from the application event viewer;

  Failing application explorer.exe, version 6.0.2900.5512, failed module comctl32.dll, version 6.0.2900.5512, address failure 0 x 00076215.

  Failing application drwtsn32.exe, version 5.1.2600.0, failed module dbghelp.dll, version 5.1.2600.5512, address 0x0001295d failure.

  The details are as follows,

  Product used is Dragon Naturally Speaking (DNS) version 10.1 and according to the seller the problem isn't a problem caused DNS by their Tech Support who I worked with for more than a week...  However the problem only occurs when this program is running.  The only way that I was able to temporarily fix the problem is to stop the DNS program in the Task Manager process section and restart explorer.exe

  Given that the supplier says it's a matter of Windows and with the info I provided please help.

  Thank you.

  Try saving the DLL for applications that crashes.

  http://nuance.custhelp.com/app/answers/detail/A_ID/6204/kW/web_ie.dll/r_id/100023

  It worked for me with IE crashing.

• Computer crashes when executing the analysis of security at the following address: C:\ProgramFiles(x86) \Photo-Service\optionallMobules\allFonts.swf

  Original title: C:\ProgramFiles(x86) \Photo-Service\optionallMobules\allFonts.swf

  When I do a scan of security whenever the reached scan as this point, the computer freezes and thoughts?

  The point is C:\ProgramFiles(x86) \Photo-Service\optionallMobules\allFonts.swf

  Hello

  
  NOTE: Before performing the following steps, you need to check if the files mentioned in the site are related to evaluation of PhotoShop edition.
  To resolve this problem, we must work in the mode of WinRE (Windows Recovery Environment).
  See the following link for more information about system recovery options.
  
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  See the section: to open the Options menu system recovery on your computer to enter System Recovery Options
  Under the recovery tool, choose command line.
  
  (a) choose the option for command line.
  (b) type Notepad and press enter.
  (c) a Notepad opens, click file , and click Open.
  (d) click on computer.
  (e) go to the location where the file resides. (C:\ProgramFiles(x86)\Photo-Service\optionallMobules\allFonts.swf)
  (f) delete the folder.
  
  Then, restart the computer and perform analysis. Check if it helps.

• Photosmart 3200 crashes when executing "routine maintenance".

  I've owned this Photosmart 3210 for several years.  Suddenly, whenever I turn it on, it says that it wants to run "scheduled maintenance".  When I say 'OK' to perform, the printer hangs forever.  I can't cancel or turn it off.  I have to unplug the machine.  When I plug it again, he asks to perform maintenance again.

  I can skip the step, but it takes at least a few buttons pushed to bypass.  Not everyone in my family remembers to do, but we should not have anyway.  What is this interview there after all this time?  Why it runs?  Or how can I turn off, at least?

  The title is different, but try the procedure described in this document:

  http://support.HP.com/us-en/document/c01386363

• CS6 hearing crashes when executing Adaptive reduction of noise

  Hello world!

  That's the problem, I edit an audio file, execution of adaptive noise reduction filter, and somewhere during the processing of the computer just crashes. It happens sometimes and sometimes not. I saw that computer showed up to a warning message just before the accident, but I wasn't fast enough to read what is written there. Recently, I made an installation system and have just a few programs installed. Before reinstalling the system the problem wasn't there, although the program (hearing) is exactly the same. What should do?

  Sekou 108 wrote:

  The system is Win 7 64 Edition family. It was working ok before. Maybe I should install all of the updates? I hate to do, my experience is that it slows down the system in the long term, but it sounds like I should do.

  I run the pro version, but it is basically the same. I have all the updates that are installed, but I have not noticed it slow down at all. Mind you, it's a fast system anyway. But if it crashes, then the installation of updates will not solve this; you need a new first reinstall an absolutely clean disc. Well, it of a pain - but look on the bright side; you are not running Windows 8. Recently, I lost almost a day of my life on it, and I'll it never to return. The rule of thumb about M$ that the OS has not changed - it is only odd people who deserve to be bother with, as a general rule. And none of them deserve installation until the first service pack is released.

• Install Acrobat Mac crashes when executing scripts package

  I just bought the update to Mac XI of Acrobat Pro, and while the download went well, the installation process is blocked by the end. I can't exit the program and it does not seem to move forward. Suggestions on how to proceed?

  So, here's the deal: I recently udgraded to a new iMac with OS X10.9, more a Mac Pro with OS X 10.6.8. I migrated my CS6 apps on and they all work fine, except that I get these Acrobat update notice, and they have always failed. So, I uninstalled wrong version of Acrobat, 10.1.8 olde before buying the update from Adobe today. Now, I can't get the update to install on the new iMac, but it installs and runs fine on the old Mac Pro. But of course I want the transition from the old to the new, and I'm stuck with no Acrobat on the new machine.

  The Setup program is run line after line of these errors:

  Nov 23 15:46:45 Big - ex, iMac.local installed [476]:. / Preinstall: sudo: unable to stat/etc/sudoers: permission denied

  Nov 23 15:46:45 Big - ex, iMac.local installed [476]:. / Preinstall: sudo: no source validates found sudoers, quit smoking

  Nov 23 15:46:45 Big - ex, iMac.local installed [476]:. / Preinstall: sudo: unable to stat/etc/sudoers: permission denied

  They just keep and...

  Message was edited by: [email protected]

  Hi James,

  You must contact Apple in this regard, as it is clearly a permissions problem.

  You might want to try the steps mentioned in the: https://discussions.apple.com/thread/3680870?start=0&tstart=0

• PC crashes when saving files on network

  When I try to save a copy of a file on my network drives, my PC hangs indefinitely until I end the process that is suspended.

  No one else on the network is affected by this symptom, and the PC has no problems to access the network or the Internet

  Hello
   
  1. were you able to save files previously without this problem?
  2. you remember changes recently?
   
  Follow the steps mentioned below and check if they help to solve your problem.
   
  Step 1: Check Event Viewer for detailed information on the problem. Consult the following links.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
   
  Step 2: Try to save a file on the desktop and check if the computer crashes. Also open the Task Manager and try to end the process SearchIndexer.exe. This, as mentioned below.
   
  a. right-click on the taskbar and select Task Manager.
  b. click processes tab, and find SearchIndexer.exe.
  c. Select the message and click on end process.
   
  Step 3: Temporarily try to disable the antivirus on the computer program and check if the problem persists. If the problem does not occur, check if there are updates available for the safety program
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software  
   
  Note: Check that you activate your anti-virus protection on the computer back after you complete these steps. It is not recommended to disable these settings on the computer. It's just to solve the problem.
   
  Step 4: If this is not enough, put the computer to boot in order to check if the computer crashes when saving a file. If the problem does not occur in the clean boot state, then you can try the procedure in the following Knowledge Base Article and see the application or program is the cause.
   
  http://support.Microsoft.com/kb/929135
   
  Note: Make sure that you put the computer to a Normal startup, once the troubleshooting completed.
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Satellite L675-11R - crashes when loading the BIOS

  Hello

  My daughter L675 crashes when loading the BIOS.

  Yesterday the system firstly could not start with a "Boot failed" error, as the HARD drive is not found.

  I restarted and is gone in BIOS - the HARD disk was recorded and shown as a first Source of seed. After reboot, the system has failed again with the same error.

  After several attempts, even if it does not. now that appears in a black screen, blinking cursor top left. Hot start works, but another key not seem to provoke a reaction. I can't start the BIOS Setup.

  I removed the HARD drive and connected it to my PC. It was recoginized and I am able to write to it. A W7 disk verification completed successfully and some problems have been "fixed". But when I reinstall the drive of the laptop, it still does not start.

  I double checked that the drive & Modules of memory are well inserted.

  Any ideas I can try?

  Thank you

  John

  Well, the cursor blinking in the upper left corner is a typical sign of a malfunction of the HARD drive.
  I think you need to format the HARD drive using other computers. Delete all partitions and insert the HARD drive into the L675 again.
  Then try to install the Windows system on this device.

  In addition, you can try to check this HARD disk using a 3rd party software.
  Drive Fitness Test is a free tool that can help you test the ability of the HARD drive.
  If some errors would be detected, then a replacement HARD drive would be desirable.

• Satellite L350-212 crashes when it's on battery only

  Satellite L 350-212 bought in June 09 all at once crashes when it's on battery only.
  It started to happen after being OK for once.

  The battery such recommended procedures have been followed.
  Is it a bad battery or what? I need to replace?
  Or did I miss something in the configuration of the computer?

  Hello

  Eventually he would launch a battery
  Did you notice that the battery is empty while the accident occurred?

  If so, try to calibrate the battery again
  The battery must be unloaded until it is completely empty and then load it again
  Repeat this procedure twice and then test the functionality of s for laptop.

  If that does not help, then you should test a new battery.

• Crashes when closing logic plugins

  Hey guys

  This is my first post so please excuse me if I did not follow the validation rules!

  After the update to 10.2.1 two days ago has developed a major problem:

  When I close all the windows plugin logic (after adding a compressor for example) logic is completely blocks and I have to restart the program. Also, it crashes when I close a logic with windows plugin project open. This problem occurs only with the plugins of logic. 3rd party plugins are fine as plugins for Apple.

  Everyone also knows that?

  I appreciate any help!

  Thank you very much!

  Is not the case here Samuel... on any of my systems testbed... including OS X 10.11.3 and LPX 10.2.1

  However, if you could copy and paste the contents of one of the newspapers crash you get then logic falls down..., I'll take a look / see if something stands out as being the cause for you...

  See you soon...

  Nigel

• MAX crashes when you try to connect to the remote server in VISA

  Hi, I'm running a problem with MAX OR when trying to setup of a client/server VISA system.  I had the first server tried 4.3 visa but she not even me would record the port on the server settings.  When I tried to connect to the server from a remote machine to access the RS232 ports, it could hang NI MAX or do nothing, depending on how I tried to implement.  If I click with the right button on the remote system in the right configuration pane and follow the wizard through, it doesn't matter, if I go to the toolbar tools-NI-VISA options and follow the wizard, NI Max crashes at the end.  Then I went online and got the version 4.4.1 and tried with the same results.  I also have abnormalities in safeguarding some configurations OR max leading me to question if there are questions of privileges.  The operating system is Windows XP Pro with Service Pack 2 on all machines.  I'm logged on with administrator rights and everything seems to have full read/write privileges, but I still have problems.  The issue of saving the port settings, I tried manually setting the parameters, as described in

  http://digital.NI.com/public.nsf/allkb/8EBAEC8A57BB48BE862574F90072D3DD

  but unsuccessfully in version 4.3, but it worked very well when I upgraded to 4.4.1 without modification of rights or privileges so some things seem weird.  Any help would be greatly appreciated.

  Hardware Dell with Windows XP Professional and SP2 computers

  The server computer has a 16 port Rocket port RS232 port Council

  I will access ports with a program written in LV7.1, but I haven't gotten that far yet

  Network is fine, I can ping the server to the client computer and permissions are set on the server and the client is pointing the right machine.

  Thank you

  CS

  Thanks for the reply.  We use MAX 4.5 so it wasn't the problem.  We are not exaclty sure what the problem is / was set apart he healed himself when we all uninstalled and deleted the VXIPNP directory and reinstalled everything.  When we did, everything came and worked as it should.  One thing that may or may not be relevant, is when I was put in place of the customers, I went through the Options Tools - NI of VISA-VISA to complete configuration rather than right click on remote systems.  Previously, this would cause MAX to crash when you complete the wizard if I though it would be a good test when I put first and, since it worked, I followed this procedure on the rest of the computers.  Anyway the problem is solved and it works.  Thanks again for the input.

• Outlook express crashes when connecting with the mail server

  Outlook express 6 crashes when the connection with the mail server, please advise, thank you!

  Try to remove your e-mail account and then close and reopen OE and then add it back again.  Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3

  Steve

• WMP 11 crashes when right click on the application

  WMP 11 crashes when I right click any where on the screen of the application or you are trying to click on tools or view, among many other things. I'm trying to get the list pane to see the and if I click on playing, and the drop nothing appears. usually crashes right after that as well. Please help, I can't find anything about it!

  so, I thought about it! for anyone else who has this problem - I hope that this saving you countless hours of frustration, I've experienced...

  -J' restored wmp version 9

  -J' completely deleted all system files and applications to version 11

  -J' rebooted my computer and reinstalled version 11

  -for some reason, it works! :)

  This may seem very simple, but I've tried so many different configurations and random ideas that I'm frankly surprised, it worked! Hope this helps someone else.