My Apple Watch worked fine then nothing, fully charged. Any suggestions?

Similar Questions

• My Apple Watch works fine, but now the time is 12 hours off - he thinks it's night now - how can I fix?

  My new Apple Watch works very well for several weeks, but today the time is 12 hours off - he thinks it's night now - how can I fix?

  HI -.

  Try the following steps:

  On your iPhone, go to: settings > General > Date time & - check that the value is automatically activated.

  Check that Bluetooth and Wi - Fi are activated on your iPhone:

  -Phone: Settings > Bluetooth - on.

  -Phone: Settings > Wi - Fi - on.

  Check that your iPhone and Apple Watch are connected:

  -When you show the time on your watch, drag upward on your watch dial > drag left / right for the look of settings > check it shows connected and shows a green phone icon. Disable airplane Mode if it is enabled.

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• I get error 1603 when trying to install Goggle Voice Chat, I am running VISTA on my dell. It was working fine then one day it just stopped... help!

  My Goggle voice chat was working fine, then one day it just stopped. I tried to reload, but all I get is error 1603... can someone help me with this? I use Windows VISTA

  Hello

  ·         What is the exact error you are getting?

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  For more information I would suggest you follow the link.

  http://www.Google.com/support/chat/bin/static.py?page=known_issues.cs

  http://www.Google.com/support/chat/bin/answer.py?hl=en&answer=162044

• All applications, works fine, then suddenly complete with error

  I get all the reports with errors until I restart the OracleFormsServer-Forms60NEWPROD and all works fine then after submitting again.

  And what happening everyday twice or more.

  And during this time all users could not connect to the app.

  Any suggestion.

  I tried

  APP-FND-1630 error for simultaneous applications accessing the database. (Doc ID 554377.1()

  but it did not help.

  We are the

  RDBMS: 9.2.0.8.0

  Oracle Applications: 11.5.10.2

  Can I 2003 Server R2

  
  

  Now the problem is solved

  By increasing the size of the Windows non-interactive process heap.

  After that I found

  Event type: WARNING

  Event source: Win32k

  Description: A desktop heap allocation failed

  on windows 2003 event viewer.

  Please see

  "Not enough memory" error message appears when you have a large number of programs running

  http://Pitss.com/us/2012/10/08/frm-93552-and-Windows-error-a-desktop-heap-allocation-failed/

• Satellite M35x-s109 - screen is black, the fan works momentarily then nothing

  I have a Satellite M35x-s109 (4 years and more under warranty). I went to turn on the laptop after being in hibernation for a few hours.

  The fan kicks on momentarily - then stopped working. The screen displays a picture very very low sign windows on the screen but nothing else. I can not even a cursor appears. It is powered as indicated by the Green led on the front of the laptop. The battery is fully charged. I tried to connect with the power adapter as well. I tried to connect an external monitor to the laptop.

  The only image that appears is the Windows form indicating which loads. Then after a few seconds of loading, the image on the external monitor is empty and the monitor goes into sleep mode. The laptop is turned off automatically or custom fade at all and the only way for me to turn it off is to take out the battery.

  Any ideas what's wrong with the laptop? Thanks in advance.

  It's very strange question. try to remove the battery, leave cell phone 20 minutes without any food and try to start with power current only. Try it without, and later with the external monitor.

  When the external monitor goes into standby mode, try to use the FN + F5 key combination to see if you get the image on the external screen again.
  Play a little with it. If nothing is done it may be something serious with the screen and I'm afraid that you need professional help.

• This is what Apple Watch works with iPhone 6SE

  The 6SE isn't on the compatibility with the watches is because it's new?

  Yes, the Apple Watch will work with the iPhone model.

• Cannot get pse14 to open it. It was working fine. now, nothing.

  I have a paid version of pse14 that has worked fine until this afternoon. Now I can't open it. I was going to uninstall it and download it again, but I don't think I can upload it again with pay them again. I am just learning how to use adobe. So I'm a bit lost here. Any help would be great. Thank you

  You don't have to pay again.

  PES 10, 11, 12, 13, 14 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 14: http://prodesigntools.com/photoshop-elements-14-direct-download-links-premiere.html

• Watch does not illuminate. Fully charged. White screen. Can someone help me?

  ieatch. Sports watch just went blank. It is fully charged. Will not come. Tried to release the side button. Tried to fix the charger.  Nothing works. Can anyone help? Thank you.

  Hello

  Try restarting your watch force: hold down the side button and the digital Crown (ie the two buttons) for about 10 seconds, until you see the logo.

  If this does not help, then try to charge your watch for about 2.5 hours, making sure that you follow the instructions from here:

  Check your battery and load your Apple Watch - Apple Support

  After this period, if it has not already restarted automatically, remove it from the charger and:

  -Try to restart it (by pressing the side button until you see the Apple logo).

  -Then try force it restarts again.

  More information:

  If your Apple Watch does not respond or won't turn on - Apple Support

• How can I sync my iPhone and Apple Watch to a new computer without losing any data?

  I'm about to fix my laptop and I need to change my iTunes on PC. But I don't want to lose any data on the health of the Apple Watch.

  Copy of the data of all iTunes from the laptop to PC will have all my apps and music. But what about the backup? They are encrypted to record data on the health of my Apple Watch.

  Can I copy and paste the encrypted data backup iTunes?

  Please I need help.

  Move an encrypted backup from one computer to another value may not work, but as long as no device should be restored now you should be able to migrate from the library to the new computer and then take a fresh encrypted backup of each device.

  Migrate a library iTunes from one computer to another

  These are two approaches that work normally to move an existing library to a new computer.

  Method 1

  1. Save the library with this trick of the user.
  2. Remove the old computer if you no longer wish to access content protected on it.
  3. Restore the backup to your new computer by using the same tool used to back it up.
  4. Keep your current backup in the future.

  Method 2

  Connect the two computers on the same network. Share your old computer < user music > folder and copy the folder of library full iTunes in the < user music > on the new folder. Yet once, remove the old computer so is no longer necessary.

  These two methods should give the new computer, a clone of the library work which was on the former. What about iTunes is it is still the 'home' for your devices library you should not have problems with iTunes will erase and reload.

  I recommend method 1 because it establishes a current backup for your library.

  Note If you have iOS devices and that you have not reached your contacts and calendar all in all items, then you need to create a dummy entry in your new profile and iTunes expected to merge existing data from the device.

  If your media folder has been separated in the main folder of iTunes, you may need to do some preparatory work to make it easier to move. See make a library of portable split.

  If you are in the unfortunate position where you're able to access your original library or a backup and then see recover your iTunes from your iPod or an iOS device to get tips on how to configure your devices with a new library with the maximum preservation of data.

  TT2

• I intend to buy a Apple Watch in the United States, but I have a European iPhone 6 Plus. Anyone know if I have a problem with syncing my iPhone (EU) and the Apple Watch (US)? I think not, but any ideas?

  I intend to buy a Apple Watch, United States of America, but I own a European iPhone 6 Plus device. Anyone know if I have a problem with the sync between devices? I don't think, but it would be more useful to have a definite answer for this as my assumption...

  Hi John

  The devices normally work together.

  There is no difference in the hardware specifications for the watch. It can be configured to use your preferred language and format of the region.

  Adapter USB power to the watch will be located in the United States. To charge your watch via food in Europe, you can use the magnetic charge cable supplied together with a real 5W Apple (iPhone) or 12W (iPad) adapter USB power (or with a third party, Apple certified adapter).

• If I click on "PIN to the browser" the sensitive axis is unselected and vice versa. I need object "PIN at the top of the browser" and 'sensitive pine' work at the same time. Any suggestions?

  In the latest version of muse to adobe, I have me against "PIN at the top of the browser" and 'sensitive pine' work at the same time.

  Now if I choose an object and the axis 'browser', "sensitive pine" is unselected and vice versa.

  The need is for the header with the logo and menu bar to be pinned to the top of the browser, so that the page scrolls in the header bar.

  Now when I click on the sensitive left axis for the logo and the sensitive right pin for the navigation bar, the "pin at the top of the browser" gets deselected.

  Any suggestions or workarounds will be appreciated.

  Kind regards

  Vijay

  Hi all

  Thanks for that bring to our attention. We will consider adding this feature in the future.

  RyanDoyle - it's an interesting hack you have found! Unfortunately, I wouldn't count on that it works like this in the future, as a bug which is to operate. If you drag the screen to change the width of the browser as a Muse, you'll see that the behavior of the elements in the status button (a menu, for example) is different from when exported. However, if you make a small change to your hack, so it should always work: set button "width sensitive" State instead. In addition, I don't see why all parts must be in separate to this job state buttons, but I've only tried a simple example myself.

  An another workaround I used is to create another, more breakpoint. For example, if I have a menu that is pinned to the top left of the browser in the dots stop, then in a breakpoint, I would pin in the center top of the browser. Normally, I wouldn't add more breakpoints, but there is a way that I found to work around the problem. Ryan workaround is perhaps the best way to go if you take my advice and use a status button sensitive width instead of the width of the browser.

  Hope this helps,

  Anna

• video worked fine, then no controller, now no video

  My video here:
  
  http://mrrogershood.com/
  
  used to work properly. you click on the game and the video begins with a clear controller on the video. then, yesterday, I got on and the controller had disappeared. now the video will not play. WHATS GOING ON!

  once more answered my own question...

  the problem ended that I handed my domain name to another web address. It did not work for some reason, but it has messed up the flash. weird.

• Internet works fine then stops working until I have disable and enable the adapter

  I have this problem for about 3 weeks, I have an ISA 2004 on windows server 2003 server connected to the LAN and WAN, get internet of Wan, the question is the always-connected WAN connection but the show me there is no Internet to disable and enable! .

  I have updated the driver, do back down, reinstall and change of management of the power to the unit but the problem still exist and appear every day in the morning.

  can someone help me solve this problem?

  Thanks in advance

  Hello

  The problem you are having is more complex than what is generally answered in the Microsoft Answers forums. Appropriate in the TechNet forums. Please post your question in the TechNet forums.

  Please post your question in the TechNet Forum.

  You can follow this link to ask your question:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Apple Watch stopped monitoring activities (walking, movement, etc.) suggestions on how to make. I have already reset my phone and watch and which did not help.

  all of the suggestions!

  Hi loulou

  Try the following steps:

  • On your iPhone, go to: settings > privacy > Motion & Fitness - check that fitness and health monitoring are enabled.
  • On your iPhone in the app shows, go to: My Watch (tab) > General > detection of wrist - make sure it's open.
  • On your iPhone, in the application of the watch, go to: Watch My > privacy > Motion & Fitness - Fitness Tracking off turn (or, if it is currently disabled).
  • Restart both devices in two turn off together, and then restart your iPhone first:
    • To turn off your iPhone: press and hold the sleep/wake button until the Red slider appears. slide it to turn off. To restart, press and hold the sleep/wake button.
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off. To reactivate: press and hold the side button until you see the Apple logo.
  • If you disabled fitness in step 3, now go back to the configuration and turn it back on.

• I can't open the PDF with Adobe Reader XI... get an error that "Adobe has stopped working" then it closes.  Any suggestions?

  I can't open the PDF with Adobe Reader XI... get an error that "Adobe has stopped working" then it closes.  Is it a question of Adobe, Microsoft problem or security issue?

  Since you talk about Microsoft, I guess you're on Windows.

  Can you open Reader by itself?  If so, try to disable the Protected Mode [Edit |] Preferences | (Improved) security].