My ATC-220-EB52 having problems installing Nvidia GTX card 750i, screen does not light

Similar Questions

• P1102w: Problem installing P1102w, PC, printer is on does not recognize, Windows 8

  I have problems to install the printer.  Loads of software and extracted, then when I go to wireless network connection, it says he's expecting me turn on the printer when the printer is turned on and connected to the USB port.  I even changed USB ports.  It is still not let me install.

  Hi @gawright59,

  I see that you have problems of configuration of the printer on the wireless network, the printer is not recognized as the USB connection during installation. I will definitely do my best to help you.

  This can occur when the printer is already recognized as the USB connection and windows does not yet detect.

  The best way to solve this problem is to unplug the USB cable, run uninstall and reinstall the printer software again. Do not connect the USB cable until you are prompted during the installation. Select the wireless installation. (do not install the printer as a USB connection and then run the Wireless Setup Wizard)

  The other way to resolve this issue when you receive the message, is to leave the USB cable connected, remove the printer in the devices window and printers and Device Manager.

  Here are the steps for access to the devices and printers and Device Manager.

  From the desktop, hold down the Windows and X. This will bring up a list, open Control Panel and then devices and printers. Right-click on the printer and on the left, click on uninstall.

  To access the Device Manager:

  Press the windows key and press X on the keyboard at the same time in the office.

  Then click on Device Manager in the list.

  Verify that connections in Device Manager for the entries of the printer, under Bus USB controllers look for a USB print media or anything with an exclamation yellow, storage device or an unknown device. Right click and uninstall the device.

  Then reconnect the USB cable and it must be detectable again.

  Feel free to click on the "Thumbs up" button below if it helps.

  If there is anything else I can help you, let me know. Thank you.

• Problem installing RCU with ADR: database Version does not match

  People,

  Hello. I have implemented PeopleSoft Campus Solution 9.0 revision 5 for a University.

  I need to develop the application for Admission online for future student to apply for admission.

  My installations of PeopleSoft are below:

  Server machine: Oracle Linux 5.10 (64-bit)

  Client computer: Windows XP Professional (64 edition) with the Internet Explorer browser

  Architecture Internet Oracle Linux 5.10 Server:

  (1) database server: Oracle Database 11 g version 11.1.0.6.0 is

  (2) the server application: Tuxedo 11 g

  3) web server: logic of Web 10.3.6.0

  (4) browser: Firefox Mozila

  (5) two Instances of huge database on the database server: 8.53 PeopleTools and Campus Solution 9.0.

  In order to develop the application for Admission online for students from the perspective, I need to make 3 parts below:

  (1) ADR installation (Application Development, Runtime) 11.1.1.6.0 (64-bit)

  (2) install the RCU 11.1.1.6.0 to create the scheme of OWSM_MDS (32 bit)

  (3) create or expand the WebLogic domain

  I installed Oracle ADR 11.1.1.6.0 (64-Bit) with Weblogic 10.3.6.0 in machine Server Oracle Linux 5.1 with success.

  Now I install RCU 11.1.1.6.0 (32-bit), on step 2 of 7 audit of the overall requirements, I face a problem like below:

  Type of database: Oracle Database

  Host name: 192.168.196.102

  Port: 1521

  Service name: HRCS90

  User name: SYS

  Password: mypass

  Role: SYSDBA

  Database is connected successfully. Verification of the 2 first elements are passed successfully.

  But check the 3rd issue "Check condition for the specified database" has not passed. The error message is below to:

  "The database that you are connected is not a supported version. Enter the database with version equal to or greater than 10.2.0.4.0 in 10 g or a version equal to or greater than 11.1.0.7.0 in 11 g. See the matrix of certification for the supported DB version".

  My database is the database Oracle 11 GR 1 material which is 11.1.0.6.0. This version corresponds to Tuxedo 11 g and WebLogic 10.3.6.0. If changing the database version, the entire Architecture of Internet PeopleSoft should be changed.

  The version of the RCU I install is 11.1.1.6.0 (32 bit) which does not really match ADR 11.1.1.1.6.0 (64 bit).

  My questions are:

  (1) what version of the RCU can be installed with Oracle Database 11 GR 1 material is version 11.1.0.6.0 (64 bit) and MARC 11.1.1.1.6.0 (64 bit) ?

  (2) is there another way to solve this problem? Find the right version of the RCU or update the version of database?

  Thanks in advance.

  Or you can try to do this work around (this work around will ignore checking the version of database)

  http://www.xenta.nl/Blog/2009/11/17/install-Oracle-fusion11g-repositories-on-11g-DB/

• Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100

  My checksur.log said

  =================================

  Preparation of control system was updated.

  Binary version 6.0.6002.22441

  Version 9.0 package

  2011-06-29 15:32

  Checking Windows Service Packages

  Checking of manifests package and catalogs

  (f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_4_for_KB948610~31bf3856ad364e35~x86~~6.0.6001.2123.mum line 1110: nam

  Checking package Watchlist

  Watchlist checking

  Checking packages

  Control components store

  Hello

  These should help to resolve the problem:

  How to fix Windows Vista error 800b0100 update
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ==========================================================================

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  ================================================================

  If necessary, you can get free reports of incidents however generally above allows to solve this problem.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVD and CD. Can anyone help? See more details. Thank you.

  Hi guys, having problems installing adobe photoshop 11 (with or without activated antivirus) elements but able to read any other DVDs and CDs. error message: Error 1935. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system.

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you have problems with a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• HP G6-1184SA: Bluetooth problem - not installed / display upward in Device Manager - does not at all - HELP!

  Hello

  I just reinstalled windows 7 64 bit on my HP G6-1184SA.

  I managed to get all the other drivers to work from the Drivers HP section on the Web site.

  However I have a problem with drivers Bluetooth.

  • It does not appear in Device Manager.
  • It is obviously not working and I don't even know how I get it to the settings to find/installation/use.
  • I tried all the drivers Bluetooth 4 under my driver on HP product page. (2 of the drivers made me have BSOD and I got in safe mode to remove).

  So basically, I want to get the Bluetooth on my laptop at work - there is no key on the keyboard or button to activate it - but I know there are as I've used it before you reinstall the operating system.

  Please notify.

  Thank you.

  Hello:

  The page on the link below product specification indicates that your laptop does not come with built-in bluetooth.

  If so, this feature would be are indicated as well as the specification of 802.11 wireless connectivity b/g/n.

  http://support.HP.com/us-en/product/HP-Pavilion-G6-1100-notebook-PC-series/5082224/model/5119776/document/c02863651/

  If you still believe without a shadow of a doubt that your laptop came with bluetooth, little matter what the State of the record, then the only suggestion I can offer for you to install the HP software Connection Manager and see if you can turn on the bluetooth car radio using this software.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112799-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5119776&sw_lang=&product=5119775

• I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem

  I have tally 7.2 work well in Windows XP, but when I installed window 7, tally 7.2 does not work, how can I solve this problem

  You have a version of Tally that had no support of the years. If you want to continue with the Tally, you will need to upgrade to the latest version...

  This seems to be the official site... http://www.tallysolutionss.com/

  It may be more friendly... http://tallyworld.com/

• I have tally 7.2 work well in Windows 7, but when I installed window 8, tally 7.2 does not work, how can I solve this problem

  I have tally 7.2 work well in Windows 7, but when I installed window 8, tally 7.2 does not work, how can I solve this problem

  Hello

  Thanks for posting in the Microsoft community!
  I'm sorry to hear that tally 7.2 does not work with Windows 8. I hope that the steps helps you to solve the problem.
  Before troubleshooting, provide us with information.
  1. what happens when you try to use tally 7.2?
  2. you receive an error message?
  3 is the issue limited to match 7.2?
  
  You can check if the software is compatible with Windows 8.
  Make the programs more compatible with this version of Windows
  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us
  If this is not the case, try to run the program in compatibility mode.
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Check the event viewer for error logs.

  a. move the mouse to the bottom left of the screen and right click to see a list of options

  b. Select Event Viewer

  c. click an event log in the left pane

  d. double-click an event to view the details of the event. Events are classified as error, warning, or information, depending on the severity of the event.

  Let us know if the suggestion provided was useful. If you have additional questions, we will be happy to help you.

• I updated my Vista home Premium to Windows 7 Ultimate but my Nvidia GeoForce 9600 m GT does not work

  Hello

  I updated my Vista home Premium x 64 Windows 7 Ultimate x 64, but my Nvidia GeoForce 9600 m GT does not work. It says Version Missmatched.

  I have HP HDX X 18 - 1180US laptop.

  Is there a link for update or fix this problem?

  Thank you

  Chance

  Hello

  Please use driver for Windows 7 of this:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3860290#N256

  Kind regards

• I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  original title: why isn't my laptop recognize the eathernet link?

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
  then the SATA, Audio, USB, LAN, etc, drivers.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• When you try to attach a PDF file as an object the WORD 2013 64 bit I'm estates following error: "the program used to create this object is AcroExch. This program is either not installed on your computer, or it does not. To change this, install AcroE

  When you try to attach a PDF file as an object the WORD 2013 64 bit I'm estates following error: "the program used to create this object is AcroExch. This program is either not installed on your computer, or it does not. To change this, install AcroExch or ensure that all the dialog boxes in AcroExch are closed. "even disabled protection at startup mode. Who made no difference

  Hi sdesk.

  This problem occurs with the 64-bit application as Acrobat is a 32-bit application making it incompatible to insert objects into a MS Word 64-bit application.

  As a workaround solution insert the object as a 'Create New' rather than create a file.

  

  Let me know if it helps.

  Kind regards
  Nicos

• The scroll feature does not work on my mouse.  I installed new batteries, but it still does not.

  The scroll feature does not work on my mouse.  I installed new batteries, but it still does not.

  Look in the system Prefereces - mouse and make sure the scrolling feature is set up how you want. If the action still does not work, please reset the SMC and the PRAM by iMac SMC and the PRAM reset

• I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc.

  I installed my USB drive but it does not recognize my imac. Only allows me to insert a disc. I'm on OS 10.6.8

  The requirements for the SuperDrive Apple USB are:

  The system configuration required

  Compatible with the following computers:

  MacBook Pro with the Retina display

• I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download

  original title: installation FIXIT

  I try to install the progrsm Fixit and it does not allow me to make the race he leaves on the download?

  Hello

  1. What operating system do you work?
  2. What Fix - it you are trying to install?
  3. What version of internet explore do you use?

  Please refer to the below link mentioned before asking your question so that you can provide all the relevant information for us to help you:

  http://support.Microsoft.com/kb/555375

  You can try the following:

  Remove temporary internet files

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Also try to save the file on your computer, then run it.