To play DVD but not CD

Similar Questions

• My computer will play DVDs, but not with the sound. I need to reinstall a driver?

  I have no idea why this is happening.

  If you install AC3Filter, which helps?

• Model BDP-S350 will play the dvd but not a blu - ray disc

  So far has never had a problem with my blu - ray player.  The last time I used the player, I watched a dvd movie.  I tried t watch a disc blu - ray today and I kept getting the error message "cannot read disc - unknown.  I tried 5-6 different blu - ray discs.  I made sure that the firmware has been updated and I followed the troubleshooting guide.  Nothing has worked.  It will play DVDs but not blu - ray discs.  Does anyone have a solution?

  Hi jfniep!

  You mentioned that he doesn't play Blu - ray discs? Can I know the title of the Blu - ray disc movies? It's happening on all Blu - ray discs you include those who played before?

• DVD/CD drive will read DVD but not CD

  My DVD player plays DVD but not CD.  Whenever I try to play a CD, the player is a kind of hum noise.  Finally, the Player opens and a popup tells me to insert a disc.

  I tried a system restore and the automated Microsoft fixit tool.  Nothing has worked.

  I use Vista Ultimate.

  Any ideas?  Thank you.

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello everyone my CD Rom has stopped playing DVDs but plays the audio CD and CD-ROM. I tried to uninstall it without result. The box pop up for media player does not appear when I insert any kind of CD.

  Hello
  Try this:
  http://support.Microsoft.com/kb/306318
  b Eddie

• CD - RW drive will play CD but not dvd "Please insert disk".

  drive CD - rw will play CD but not dvd it says: "Please insert the disk".

  It would be like a CD player is designed to play CD to play a DVD, you need get a DVD player.

  DVD players can read DVD and CD, but CD players cannot read CD

• Satellite A50 will record on Dvd, but not on a CD - power calibration error

  My Satellite A50 will record on Dvd, but not on a cd. It happens with power calibration error after about 5% of the record.
  The drive used to save at all!

  --> Power calibration error is a mistake known to me.
  I've read on various sites several suggestions and comments and the power calibration error appear because the lens of the drive can not calibrate correctly.
  It is a hardware malfunction and unfortunately nothing :(

  You will need to replace the drive

• Inspiron 1521, vista - plays CD but not DVD

  Ive tried before to play a DVD, it worked. It was at Christmas last year. CD works perfectly fine, but the DVD doesn't come. I tried today to play some, but will not work. I go to the computer to look at the disks and it recgonizes the DVD, but if I try to open and play in Media Direct (this program also does not), or Windows Media Player, it won't appear. WMP will pop as its about to play, but it will simply disappear. Direct Media simply does not. I don't know what to do. Someone help me please.

  
  

• I can listen to music when I play the DVD, but not what the people say.

  I'm running an Inspiron 1525 with Vista. When I put the DVD to play in Windows Media Player, I can hear the music on the DVD, but nothing that people say. I tried to plug in headphones and readjust the speakers, but I can still hear nothing but the music. This happens on every DVD, but I have no problem with the CD.

  Thank you

  Kathleen

  Hi Kathleen,.

  I suggest you try the following steps:

  Step 1: Change the settings in Windows Media Player volume and control; Follow the steps mentioned in the link below

  Change-volume-settings-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-volume-settings-in-Windows-Media-Player

  Step 2: Check if you have all parameters related to playback of DVD in the software Sound\Audio that may have installed you.

  Step 3: check if you can play DVDs in Windows Media Center

  Play-a-CD-or-DVD-in-Windows-Media-Centre

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-a-CD-or-DVD-in-Windows-Media-Center

  Step 4: Check if the DVD work fine on another computer to eliminate any problems with the DVD itself.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M30: Mat * a UJ - 820 s read DVD but not CD

  I have a Toshiba Satellite M30 and I have problems with my carpet * CD/DVD UJ - 820 s player.

  I had to do a full restore due to a virus problem, and now the reader can not read any CDs.
  I can read movies DVD and load/use of programs to DVD but when I try to use any media CD (load programs, play music CD, burned CD playback) it gives me the error "D:\ is not accessible. Incorrect function. »

  I looked on the forums and have tried to remove the drive from the hardware Manager, tried to change control of the IDE and have downloaded the latest orders that I could find.

  Any help please!

  Hello

  tried a Firmwareupdate for the reader? At this address you can get the latest update if it is not already:

  http://Forum.RPC1.org/dl_firmware.php?category=15&manufactor=18

  So if the problem persists, then your only option would be to contact a local service partner. They will probably check your disk for physical errors.

  Welcome them

• Why my self playing dvd will not be recorded dvd?

  I have a saved auto dvd that won't play on windows media player despite me download a shedding of different codecs. I don't know what the record was made in format, it comes from a canon camera recorded to a dvd player/burner. My computer is HP pavilion and it sees the drive as white, any ideas anyone please.

  I have experienced and recorded the dvd, as well, the DVD - RW and DVD + R with two freewares and I'm able to play an exceptional video on my computer or DVD player.  Two freewares are available on internet and their software can be downloaded and run your browser on a computer.  The two programs are DVDVideoSoft's "Free Disk Burner" and the other "Convert Video" by X2XSoft.  I use video conversion to convert my video the Audio_TS and Video_TS files and output them both in a directory on your hard drive.  C:/DVDdirectory/Audio_TS and Video_TS/DVDdirectory/C: use of software Free Burner of disc to burn both files on the DVD.  The files to burn must be considered in the as free disc burner: Audio_TS Video_TS, otherwise your DVD will not play on anything!

  Free disc burner "finalize" the DVD for you.  The Audio_TS is to render the sounds.  The Video_TS is the image.  Do not be misled by the Audio_TS bend not containing or not list all files!  Your good and ready to burn.

  A pointer, however.  You will find your best record burning SPEED on "more SLOW!  You may be using a DVD that can be recorded at 40 x or 48 x or 16 x, or some fast deal, but always choose 4 x or slower.  I check in at 2.4 x and get better results than the faster speeds.  You paid for the DVD, do what you want to do.  Hope you can understand this and happy saving!

• ATAPI DVD A DH16AYH ATA Device read DVD but not CD

  Engraver of CD/DVD in Compaq Presario 5010NX w / VistaBasic read any DVD but has problems with CD if I insert a music CD, sometimes it will open right and I can play music. Most of the time he just tells me to "insert a disc", usually open the status bar, but not always. If I close the drawer [or eject and close the tray] from 3 to 15 times, he finally opens the CD. Generally. Sometimes I drop and open it on my old computer Millennium, [which never fails to open the CD].  I bought a cleaning disc, but it still happens. Also, it stopped opening the tray with the manual key (1,200 works tent) and will always open with 'Eject' of the computer, but only with DVD and sometimes will open with the "eject" computer with the CD never if it is empty, so I always keep a known disc "opener" in the status bar. (if I forgot, I use a paper clip)

  I did an online search of the Device Manager for a driver update and he told me that the best software is already installed. I just need a new burner? Why is - that it will work with DVD CD not? driving me crazy. Thank you ps can not find a burner mfgr. says simply "drive SuperMulti DVD with Lightscribe" - pps I tried uninstalling the Device Manager, and then restart the computer - no change.  Haven't tried the support.microsoft.com/gp/cd_dvd_drive_problems diagnostic program no solution I came across a post from someone else who had the same problem [former position & 'uninstall & reboot' was the only suggestion on this one.]   I can't believe that it could be physical burner... why he wouldn't hesitate to read the DVD if it was a physical problem?  Help?

  Hello

  Check with Compaq Support, their drivers and documentation online and apply to the
  HP forums for known issues. Compaq can give you more information on the disk.

  Compaq - support, drivers and documentation online
  http://www.Compaq.com/country/cpq_support.html

  Compaq (HP) - Forums
  http://h30434.www3.HP.com/PSG/

  ==================================================================

  Readers to use and this intermittent problem can be caused by wear.

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• After being opened for a while (with several tabs) Firefox does generally and repeatedly play a sound - video will play again, but not sound.

  This problem started happening only recently. I often keep my Firefox open all night with sites like rainymood.com or grooveshark.com playing, as well as several other tabs, including but not limited to Facebook, YouTube, and Reddit. Sometimes, after a few hours/days to not restart Firefox or my computer, Firefox starts to become insensitive - i.e., pages take a long time to load, opening new tabs is difficult for the browser and videos will have up to 30 seconds to start playing. In addition, the sound stops playing. If I start a YouTube video, after the initial period of excessive load, the video will play, but without any audio. Also, sites such as rainymood.com and grooveshark, even Facebook, stop sound.

  Note that this is different from an incident of flash plugin - when flash falls down, the audio and video become inaccessible and a simple refresh or restart of Firefox will solve the problem. But what is happening here is different; If I refresh the tab, nothing changes, and even if I restart Firefox, it opens the same way again until I restart my computer completely.

  Also of note: I had, in the past, this same thing happens, but rainymood.com continued to play, however no other tabs would make sound. The problem is sporadic and I don't know where to start. Also, sometimes it's only a problem of Firefox specific, which means other programs on my computer can make sounds, but sometimes this problem makes my computer all stop making sounds, with the exception of Ventrilo, which works, but is also insensitive in the beginning.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Satellite A100 PSAA9A - can read DVD BUT not CD with Windows XP

  I use a satellite A100 PSAA9A computer laptop and I started having trouble with the CD/DVD drive. It was working fine until yesterday when he decided not read no matter what CD I get the message asking me to insert a disc, when there is a CD in the drive. It still reads DVD good.
  I don't know if he has anything to do with the download of the updates of Windows XP because the troubl seems to start after I did.
  Is there somewhere in the creation for the player who controls this? Also when I run the troubleshooting test it always ignores the test of this drive.
  I'd appreciate any help.
  See you soon

  Optical drives, DVDS, has some different faces to work with CD and DVD, but objective and optics are the same. He had arrived, when in one two heads become a dust or something else. I thing that you must visit the Service and your disk cleanup. But do not use a cleaning disc!
  PS. Windows updates, as and OS, are not issues.
  Make sure it's easy - attempt to start bootCD (not BootDVD) with anyone by pressing F12 at startup. If the running machine - it's Windows, if not - DVD player.
  See you soon

• Reads dvd but not cd

  Here most of the issues have the opposite problem - can read CD but not dvd.  I recently had my computer cleaned using "easy Support. Before that, the computer can read both. Could it be the problem? Any help will be appreciated.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
   
  The article below describes how to troubleshoot common problems that may occur when a Windows XP-based computer cannot read a CD or a DVD in a CD or DVD drive. This article contains several methods that you can use to try to solve these problems, and it also includes some advanced troubleshooting steps.
  
  How to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD
  http://support.Microsoft.com/kb/321641/
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]