My background usually adapt in googlechrome and it leaves white spaces. anyfeatures?

Similar Questions

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 op

  I usually 30 tabs open, and memory rises in an unexpected way, so that when it reaches 1.2 GB, firefox crashes. Also if, for example firefox consumes 700 MB of memory (with lots of tabs open), and if I close the tabs and let just 2 or 3 open, the memory usage does not go down and left to the 700 MB. Thank you for your attention. Cordially, Ricardo

  ID of the Crash

  BP-765e3c37-0edc-4ED6-a4e9-7ed612100526

  See http://kb.mozillazine.org/Firefox_crashes and Firefox plant - troubleshoot and prevent assistance fixing crashes

• Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my AT & T U-verse services?

  Can I use an adapter of lightning and HDMI with my iPhone cable and connect it to my TV without messing up my services AT & T U-Verse?

  Why have something to do with your Uverse services?

• When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  When you play FarmVille, my computer crashes or I get a notice that "bits have been lost" and refresh the page... usually don't work and I have to start all over again.

  I think that there is a prob with this game, it does not matter if you use firefox or IE. Or another browser. It blocks something. Or causes probs.

  FB needs to fix it. There are a lot of people (in a Google search), who are having probs. One way or the other

• I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  I have a Microsoft ISATAP compaq6715b #4 adapter not work and can not get on the internet about this updated driver

  See the following article:
   
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 932520

  Make sure your network connection is working and properly configured.

  You can try to uninstall and reinstall the Microsoft ISATAP adapters using the following steps:
   
  In Device Manager, this adapter under network adapters and are hidden so you need to click the view menu, "Show hidden devices".
   
  1. in the Device Manager, right click on the element of Microsoft ISATAP adapter #4 and choose uninstall.
   
  2. in Device Manager, click on the "Actions" menu and select "Add legacy hardware.
   
  3. click Next, then select "Install the hardware that I manually select from the list (user)", click Next.
   
  4. Select "Network adapters" under common hardware types, and then click Next.
   
  5. Select "Microsoft" to the title of manufacturer and "Microsoft ISATAP Adapter" in the title of the network card.
   
  6. click Next and follow the remaining instructions.

• S2415H adapter part number and possibly how to buy a replacement?

  I have misplaced my adapter while moving and can not understand which adapter I need to buy, either 3rd party or Dell (if they sell them).

  My monitor is the S2415H, but on the back, it is listed as S2415Hb. Not sure if there is any difference.

  I tried to chat/email technical support, but the monitor has no serial number and the serial number does not work so I can not simply contact technical support which is currently closed by phone. If someone who has the same monitor could help or if dell support can provide the part number it would be appreciated. I would like to order as soon as POSSIBLE I currently can't use my PC without him.

  1XRN1 = power adapter 65w
  K260C = power cord

• I waited three days for my membership to renew, usually you go ahead and take my money already?

  I waited three days for my membership to renew, usually you go ahead and take my money already?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• PSE has suddenly started to send photo collages in an unreadable format.  I usually send by drag and drop in Gmail, but recipients are no longer able to view collages.

  PSE has suddenly started to send photo collages in an unreadable format.  I usually send by drag and drop in Gmail, but recipients are no longer able to view collages.

  As an experience, create a new file with something on this topic in PSE, then save it (save as) in JPEG on your desktop.

  Try to send to yourself via your email client.

• To start Windows and then leaves after 38 seconds

  I have Windows XP on an Acer Aspire One netbook, which I bought used.  When I got to the top, it worked fine for half an hour. I was able to connect to internet, download, etc.  Then I stopped.  I started a little later with the power adapter is plugged and an SD card into the slot.  Although I don't think that's the problem, the SD card was not formatted to FAT.

  Now, the computer starts up, the Windows screen and then it goes to "check disk".  Most of the time, he gets exactly "22% complete" and then everything stops completely and instantly.

  Same thing if I go into the Bios: it stops after 38 seconds exactly.

  If I remove the battery and leave for a while, the system starts and not even on the desktop. I am able to open something (Control Panel for example) and then everything stops as before, but it is longer than 38 seconds.

  I have the Windows disc and the drive system supplied with the netbook, but I don't have an external CD/DVD drive for her.  I tried ALT + F10 and it does not help.  I tried to change the Bios 'Internet' boot and it does not help.

  I rebooted about 30 or 40 times.  Same results each time: 38 seconds and death; unless I pull the battery, then I can get on the desktop and then it stops.

  What else can I try?

  Hello

  ·         What is the model number of the Acer laptop?

  ·         You get the error message?

  ·         Were there recent changes made on the computer before the show?

  If the computer stops even in the BIOS, the problem is related to hardware. You can deal with this problem due to the overheating of the processor. Also check if the fans on the processor, heatsink heat and cases are running. I suggest you to contact the Acer Support about the issue.

  http://support.Acer.com/us/en/default.aspx

• 355 G2: HP 355 G2 does not start and charger flashes white

  My laptop HP 355 G2 primer not. I tried to leave the charger for several hours, but it still won't start. Also, the light where the charger goes into the laptop is flashing white.

  I tried to unplug the unit from the power, and now the power button down for several minutes in fact and has not made any difference.

  Remove the battery and plug in the AC adapter.

  Is - what the power\charge led portable light upward?

  Press the powerr button.

  The power of the laptop is on and start on the Windows logon window?

  If so, then the battery is defective and must be replaced.

  If not, then the power adapter has failed and must be replaced.

• Muse is changing some text and images to white during the download of FTP

  Muse is changing some text and images to white during the download of FTP.  I tried to delete and re-create these assets, but still their changed to white... and I have a white background, so it seems as if it is not yet here.

  Hi Michael,

  Please share your Muse file with us for assistance.

  Please download on creative cloud or dropbox and share the download link with me in a private message.

  Kind regards

  Akshay

• What is the best way to remove a white background seamless photo with a photo of the white product in order to make the background transparent for the production of graphic art?

  I'm making a picture of the product of a product of pale whitish color on a white background without sewing (quite complex detail).  I need to make the background transparent for the web and the production of catalogs, I've always used the pen tool to create a clipping path.  Is there an easier way?

  According to the image that you have to work with, you could try an initial with the Quick Selection tool and refine edges.  Save the new output layer with layer mask.

  http://photography.tutsplus.com/tutorials/quick-tip-using-refine-edge-for-improved-masking--photo-14682

  Nancy O.

• Frame unwanted break and infinite white space

  I have a 197 string I want to display in a single text box (and can not have spaces between them, because the cast, I intend to use ultimately has a character assigned to the space that I don't want to appear between the other characters). All the content has to adapt, but once it gets past a certain size (about 11pt), InDesign requires some sort of break, pushing 80 characters in text 'in excess'... which does not appear in a text box, that I put on, but rather still registers as "overweight," so it seems that InDesign creates an infinite white space.

  I have played around with all the options to keep, I tried the hyphenation, I checked and unchecked 'unbreak,' I tried using GREP to find hidden hidden line/column/frame break - nothing.

  Here the whole of the text, visible to 28pt string:

  

  and then disappear to 29pt, although there is still room in the text box for the remaining characters:

  

  Am I missing something? Or is it just not possible? Thank you!

  You'll have to do some manual work:

  • First turn on hyphenation, so you can see all the InDesign hyphenation line breaks drops.
  • Then click with the type tool to point break (end of line), and then choose Type > insert break character > discretionary line break.
  • Once you have done so for all the line endings, you should be able to disable hyphenation without the text becomes overset.

  CARI

• Is it possible to ignore white space when exporting PNG files. Not the background / work plan

  I have icons, which have white features, mask the other lines to create my icons. Instead of me will expanding the traits and then using pathfinder to create transparent traces to finally create a fill black "single", is it possible to simply export and ignore white? Is there a script that would exist? That would make my life so much easier.

  

  Ignore the white on the smallest sprocket, but white on the cotyledon is necessary for the icon. To make this work, I would usually expand all items and use pathfinder to create my forms. It is a bit tedious doing lots of icons. I would like to know if there is an easier way to do it.

  Thank you!

  Make sure that 'White' is in the Swatch Panel, then choose white as "Transparent" and "8-bit" PNG in the color table.

  Or you can rework your works of art to be truly transparent.

  Or fix the PNG in Photoshop.