My backup files are on DVD + R, but when I try to restore, Vista Home Premium States, they are not on the hard disk.
How can I get the recognized without any instructions? Why no instructions? I was at this for hours. Should I move them to the hard drive? Backup looks so good, but I need my files.
Hello
Here are the different ways to back up and restore
and a link to the appropriate forum for the best help available for your question
How to make a backup of your data
http://www.vista4beginners.com/how-to-backup-your-data
How to restore your files
http://www.vista4beginners.com/how-to-restore-files
the 1st link below is how do the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial145.html
and that is how do to recover the backup complete pc
http://www.bleepingcomputer.com/tutorials/tutorial144.html
If you have problems, it's in here is a forum for microsoft specifically for backup issues
http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads
Tags: Windows
Similar Questions
-
I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.
After you run the system update readiness tool, I found the following errors in my CheckSUR.log
=======================================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-09 19:13Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
(f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3eSummary:
Seconds executed: 1221
Found 2 errors
CSI shows lack Total count: 1
CSI Payload file lack Total count: 1Unavailable repair files:
winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest=======================================================
The newspaper CBS.log itself has several types of mistakes, too. Here are some samples:
-Errors 'M²;
2009-10-09 21:10:27, info CBS SPI: from SPInstall
2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper. Continue without. HR: 0 x 80070020
2009-10-09 21:10:27, info CBS SPI: wave 0 detected
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: spent before due diligence
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: M² is not included in
2009-10-09 21:10:27, error CBS could not initialize wrapper M²
2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value-"Could not find the CixTarget Molok" errors.
2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109-"ILLEGAL_CHARACTER" and more "Sqm" errors-
2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
[gle = 0 x 80004005]
2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
[gle = 0 x 80070246]
2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4
2009-10-09 21:30:26, information CBS Exec: comprehensive treatment. Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized. Reboot required: no
2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized. Reboot required: no
2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized. Reboot required: no
2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface. HR 0 x 80070246
2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
2009-10-09 21:31:41, error CBS didn't M² value for parameters
2009-10-09 21:31:41, error CBS failed to set exit code value M²
2009-10-09 21:31:41, error CBS didn't M² for the SKU value
2009-10-09 21:31:41, error CBS doesn't have the m value for the build number------------------------------------------------
I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.
Any help that can be provided would be greatly appreciated.
1 person needs an answer
For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...
After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up. But overall these problems were minor compared to it, that I lived just to fix some missing files.
-
The following files are not on the system: not a path >;
I tried to install several is based on different machines, but I have the following error:
The following files are not on the system:
Details:
CDK_Build_Invoke.VI.ProxyCaller > CDK_Build_Invoke.vi > CDK_Engine_Main.vi > CDK_Engine_PreBuild.vi > CDK_Engine_FileExists.viI've done several front facilities on the same project, I'm not sure what I could do to make it appear suddenly. Has anyone else seen elsewhere? How can I know which files the installer needs?
See this article: not a path error received when building an installer.
-
I just installed DW 13.2. Linked files (all CSS, scripts...) "are not on the local disk" - all works in CS6. Help...
When I insert one of the page of the Web site, it shows in the design window. But when I try to bring any document linked in the left window, code, it is empty and the message says: "whatever.css is not on the local drive. Also, when I click on LIVE, the file looks like she does not see the file CSS, no images.
The same site looks and works OK in the DW CS6.
I'm on Maverick - 2012 Mac Pro - 2 x 2.66 12-core, 64 GB of RAM.
I configured the same way as CS6 preferences. Same location of the site, same links.
Am I missing something? What should I do? I uninstalled the DW CC, cleaned pref and installed it again. Same question.
Help, please.
I think, I solved the problem, but I still think that the Dreamweaver does not recognize the addresses.
I then drive CC_A BB_A Web sites (these are the actual names of the readers). It's always the disk 'data', apart from the OS, but with a different name. everything works. Opening files referred to in the script window, 'live' works as supposed.
I can only speculate that readers 'CC_A' name has confused the program called CC.
I can find no other explanation, since, in addition to the name of the drive - everything else is the same.
Thanks for trying to help.
-
My MacBook Pro is not connect to my Time Capsule so it backs up. IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.
The problem started when I upgraded to Yosemite, sometimes back. I am running 10.10.5.
The MacBook Pro...
Click the 'clock' Time machine at the top of the screen of the Mac
Click Open Time Machine Preferences
Click Add or remove from your drive
Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)
Click remove disk
Close the windows
Restart the MacBook Pro
Click the 'clock' Time machine at the top of the screen of the Mac
Click Open Time Machine Preferences
Click select drive or Add or remove disks
Choose the Time Capsule drive (probably named 'Data') by highlighting
Click use the disk
Close the windows
Wait a while to see if a backup is performed
If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now
Report on your results. If the backup still does not work, we need the exact message that you see there.
-
I reinstalled my CS5 on my new laptop and it shows updates to day, but everytime I try to download it is said that they do not have? they are old? Help!
Hello
What operating system do you use?
You can download and install the updates manually from: http://www.adobe.com/downloads/updates.edu.html
Kind regards
Rave
-
When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.
This has happened
Each time Firefox opened
I tried to download firefox.
User Agent
Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)
When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.
When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.
If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.
A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.
-
Install Windows 7 Home Premium 64 Vista Home Premium 64. It hangs on the last part of "transferring files, settings and programs. Before installation, the installation program tells me Logitech Quickcam 9.0.2 and Mirotune ATSC Capture Device was born to be unintalled. But neither are installed that I can see. What can I do?
so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine
check with them
and read this
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
-
Airport utility in windows 10 does not detect the hard disk, how to?, the Office detect wireless internet no hard drive.
What hard drive? It of a time capsule, or is it a drive connected to an airport extreme?
What model number is the most convenient airport?
Any plugged into USB drive must be formatted FAT32 (no other type of FAT as exFAT) or HFS +, IE standard Apple format.
In addition, not all drives are recognized.
The internal drive of the TC must be recognized, but there could be problems as well according to the age.
-
Version 5.0 on a MAC doesn't let me switch between tabs. Can I open a new tab, but when I try to go in a different tab, it shows me just the content of the tab opened most recently. Help!
In addition, pop up blocker works for a while and then stops working. I have to close and restart Firefox to make it work again. Help!
I had the same problem, but with Firefox 4.0. My first thought was last updated to Firefox (after of course restarting FF), but it did not help and I had the same problem.
Among others, I had an extension installed and enabled called tile tabs 4.10 I thought could easily create this problem. I went in my Add-ons Manager and disabled, restarted Firefox and tabs worked properly again. Unfortunately, the extension of the tile tabs is my favorite Firefox Add-on and I use it almost every day to manage my web tasks. I went to the page Add on for tile tabs and saw that there was a notice that version 4.10 did not work properly on Mac OS and install version 4.9 of the extension. I saw that they had a new is not-yet-seen version 4.11 who has tackled the problem of Mac OS, installed, and everything seems to work properly.
I have no idea why all of a sudden I had this problem as I don't had not updated Firefox or the extension of the tile tabs recently. Also, obviously this could not solve your problem, especially if you have the module installed and active. But our problem started at the same time for both of us it seems based on your post time, so its probably not a coincidence.
But its worth a quick glance and you can check other extensions if you don't have the legs of tile that might be the cause of the problem.
-
How can I get my E drive working again? I inadvertently stopped a backup file and ejected from the disc without it completed stopped. Now, he does not recognize the disc. Please help me. Computer: Compaq (Desktop), Windows Vista Home Premium, Service Packs 1 and 2.
Hello
Check with the support of Compaq, their online documentation and drivers and their forums for
known issues.Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Trying to help a friend with a laptop Gateway T-1625 which has a player of ATA Optiarc DVD RW AD - 7563A which will not read a CD or a DVD. She had some viruses on its system VISTA Home Premium and I backed up his HD using backup on his laptop. After that I restored its system with backup, his drive DVD RW Optiarc quit recognizing a disc when inserted. It shows the E: drive letter in my computer. It shows no 'play' if right click Properties for the reader. Also, if I click on explore, he says "Insert disc" then open the drive. On the Microsoft Support site, he said possible problem, it's in the registry. Go to the registry: HKEY_LOCAL_MACHINE, SYSTEM, current setting, control, class, (4D36E965-E325-11CE-BFC1-08002BE10318), right-click and search for "low filter and or high and delete those values. Restart the PC. In this register, it does not show these filters in the registry for this key. Need help on this. Thank you
Hi oldphoneman,
This problem occurs if the following conditions are met:
· An audio device is disabled.
· Windows Media Player is already running when you insert the disc.
Step 1: Follow the steps mentioned in the article below
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you
-
Complete PC Backup and restore | Vista home Premium | upgrade
I want to create a full backup/restore of my system because 1 of my RAID volume has failed. (My computer is less than 6 months old). I was ignorant when I bought my new system Vista Home Premium won't let me create this type of backup.
In order to get this feature that I have to upgrade to Vista Ultimate for $220? This seems a little high for a function. Also if I update can I erase on my current hard drive when you install the upgraded operating system (i.e. I have to reinstall everything anyway since the full backup/restore will not work until the new operating system is installed)?
TIA
http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx
Above is the link to the complete PC Backup.
It works in business and above.
A preferable and less costly, alternative is Acronis True Image.
See you soon. Mick Murphy - Microsoft partner
-
Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium)
I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing.
I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred".
I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well.
It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers?
Kind regards
Jason.
SOLVED
It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections.
Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged.
Kind regards
Jason. -
I read some information about windows vista. Is Somethins I read several times: "while all editions of Windows Vista can support processors multi-hearts, only Windows Vista Business, Ultimate, and Enterprise can support dual processors."
So my processor AMD dual-core or a quad-core is not used or recognized by Vista home Premium 64-bit? What 32-bit?
As for Intel?
Thank you.
Think catch. The chip in the socket is called a physical processor.
Vista Home Basic and Premium can use a. Any number of cores is OK. Carrots
are called logical processors.
Vista Business, Enterprise and Ultimate can use two jacks. Number any of
cores of each is OK.
Only the editions of Windows Server can use 4 processors and up to.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
IOS10 notifications not working not
I've just updated to iOS10 today and now all of a sudden my notifications to the texts do not come through. Previously, my text messages would cause my phone vibrates and turns on the home screen, where I could read the message. Now, I only get a not
-
Installation of a second hard drive in an HP DC7800 Tower
I am installing a second hard drive in this PC. Here now, the drive in seems to have bit sockets rubber screwed onto the side of the disc. These rings slide into the slots in the area of the disc hard turn... anyone know where I could get these lit
-
My computer does not illuminate? It's like he went into permanent hibernation and screen says no signal input for the two DVI & VGA? It happened after my 2 year old was playing with the keyboard. Power on both drives hard & monitor buttons are oran
-
Samsung galaxy: Samsung Tablet HP printer not wireless printing
How to print from my galaxy tablet from samsung on a non wireless HP printer
-
My computer is very slow to woking
Hello Please can someone help me, I have an Acer laptop running Windows 7, Yesterday all of a sudden, it started to go very slowly. and it will not be closed. I don't see why I looked on the Task Manager to see which could use computers, processing t