My c309a keeps asking to remove the usb from the printer device.

Similar Questions

• Computer stops after removing the hardware device.

  Original title: closure of the problem

  Once I am done using bluetooth and easy then disable the bluetooth in my laptop sony vaio, my laptop keeps. It is stuck on the "shutting down" screen and stays just like that. In this case only everytym I use the bluetooth.s

  Hello

  Thanks for asking! If I understand correctly, you have a problem with the computer to close after removing the Bluetooth device.

  Before I continue, I would like to collect some personal information.

  1. Were there of the last changes made to the system before the show?
  2. You get the error message?
  3. The question is limited to specific device?

  Method 1:

  Follow the link to perform a clean boot check, if it helps.

  How to perform a clean boot for a problem in Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  Method 2:

  Follow this update of the driver update Bluetooth drivers. Check if it helps.

  Answer with the results, I would be happy to help you further.

• Printer does not print and I am unable to remove the printer and reinstall

  I have a printer HP1400.  It would not print all of a sudden.  Could not delete the point, that it would not print.  Could not remove the printer either.  Tried to delete as an administrator.  Disconnected everything, rebooted etc but no joy.  Is someone able to help me with this.  I run Vista and have never had any problems before.  Thanks in advance

  Hi Dee31,

  Thank you for your message.

  I suggest clicking on this link and read the article to understand the clean boot method:

  http://support.Microsoft.com/kb/331796/en-us

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to remove the old devices in list "managed device"?

  I would like to know how to remove the old devices (disused) from the list of devices managed on version 2.2?

  Go to management > Unmanage devices and select the devices you want to delete. Click the right arrow to move them in the right pane, and then click on the button "unmanage".

  Thank you

  Lynden

• Whatever it is possible to increase the speed of printing, or is the printing device / network critical connection?

  As the document of the site controller, I mark & print large volumes of documents. Variating in size but that explodes in general strongly when printing.
  Search within Acrobat forums and seems quite common and probably inevitable.

  Tried with/without feeling "like a picture" but did not really much of a difference. Increase in file and the time required for printing on the same.

  However, I think that the internet high speed and or the internal memory of the printing device is too large:

  Internet high speed - also the internal network connections - is a real problem

  Printing for example an original file size 15 MB I've seen explode > 300 MB but the worst is that I can see the indicator of memory on the printer (2.5 GB installed) increase of slow death.

  Takes minutes to load a next page - often with > 50 pages documents printing - multiple copies - really takes hours

  Then of course my colleagues do not appreciate it - local printer however not an option yet.

  
  Assuming that the problem might as well not be Acrobat but also somebody can help me? I'm in contact with suppliers of printing device already to see if a larger internal memory - if possible - would improve situation.

  Next issue will be speed network & internet?  15 Oct status: no improvements made/found yet...

  
  Any help - suggestions welcome!

  The problem is that PDFs are highly compressed, but the need for printers information is just the opposite. Printers are designed on the assumption there is a fast path to the printer - cable USB or network more quickly. There may be problems of speed printer too: a PDF can have be printed a full page of graphics and a slow printer designed mainly for text might crack.

  If printing the image makes no real difference, you have a printer that requires images already...

  If the printer has an available PostScript driver (and the equipment) try this.

  If the printer is capable of printing multiple copies itself (i.e. send once, a lot of printing, rather that send several times), try this.

  If your company can't run to a few hundred dollars for a local printer, then maybe they need to spend tens of thousands on an effective network. (Yes, I know that's not under your control, it's frustrating!)

• C309a error message: remove the USB from the printer device

  My C309A was connected wireless via time capsule or Airport extreme for a year to the network & work find on all Macs. There was an update of the HP software to 2.4.1 on 01/07/10 and since then it won't work. I have reset to default settings, more #/ 3 reboot and it goes through the initialization process but the network configuration wizard cannot find the wireless network and the same error message finally backup on the screen and you can't do anything unless you turn off. He can come back and do not have an error code next time, but it will not find the network either... so you can shut off again and the next time the error message appears. There has never been whatever it is connected to the USB port. I have re - installed software and still have the same problem.

  Please need help or suggestions. Thanks in advance.

  E-mail: [text removed for privacy]

  Here is how to contact HP.

  Please remove the serial number of your post (Options > Edit Post).

• Windows 7 Professional keeps asking to install the validation tool when trying to install Virtual PC and Xp mode.

  Original post: loop Validation

  I just tried to download XP Mode & Virtual PC for my UK professional-Windows 7 64 bit, but then he asked for a tool of validation.

  I downloaded it, it installed itself, and then the page asked me to upload it again, only then let me know that I had already. This happened several times in a row.

  So.

  Is it possible to download a version of 'master' of the ruined, validation tool so that I will not be asked to download the files of more than 155-Ko?

  I had the same problem.  I found myself in the software section authentic Microsoft on the Microsoft Web site: http://www.microsoft.com/genuine/default.aspx?displaylang=en

  Click the validate Windows on the left side of the page.  Return to the XP Mode/Virtual PC and it should allow you to validate now.  Worked for me anyway.

• System keeps asking to reactivate the product key

  recently, when I turn on the computer, microsoft asks me to update or key in my product key that actually, I bought Microsoft 7 Home Prem in Singapore years ago, and after that I entered the key, the system still ask again me the procesure.

  Can you SB. Show me how to solve this problem?

  Thank you

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us
  ----------------------
  Have you installed a new hardware or software since you started facing this problem?

  Do you have any software installed record cleaning? If so, uninstall it, registry software is known to tamper with Windows activation technologies.

  What Antivirus utility you installed?

  What's your date and time correct?

• My 7250 Photosmart all-in-one, will not be printed. He keeps asking to replace the blue ink cartridge lite.

  How can I get around the error message that doesn't work I would like to print?

  jason_h wrote:
  The Photosmart 7250 requires that all cartridges are available to be able to print. It is built into the unit to stop damage to the print head by preventing the ink to dry in the ports.

  If the machine gives an error that a cartridge is low and needs to be changed, then it should be changed to resume printing. For more information on depleted of ink cartridges in the Photosmart 7250 see the link here.
  I replaced the bad blue cart. get the right one tomorrow - more to follow. Thank you

  jason_h wrote:
  The Photosmart 7250 requires that all cartridges are available to be able to print. It is built into the unit to stop damage to the print head by preventing the ink to dry in the ports.

  If the machine gives an error that a cartridge is low and needs to be changed, then it should be changed to resume printing. For more information on depleted of ink cartridges in the Photosmart 7250 see the link here.

• HP 4635 stuck to remove the print mode and custom print job new shipments in Quebec City

  I just installed the HP 4635 printer to my network.  All devices were wireless print yesterday.  Today, the device of the laptop has a print job that I asked to be removed.  He said "deletion" for two days and I can't get it 'take off '.  whenever I have send a new print job to the goes in the line 'behind' the print job that is stuck in the "suppression" of fashion.  I tried to turn it back on.  re-booting, ctrl, alt, delete.  do anything to get this print job 'take off' and deleted.  Suggestions?

  Hello

  On your computer, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

  Reboot the laptop and you should find that the print job has been deleted.

  Kind regards

  DP - K

• remove the printer in "subject: config.

  I uninstalled my printer and then ran ccleaner. When I open "topic: config ' there are about 12 entries listed for the printer I uninstalled. Remove these entries?

  Are these entries also always present if you close and restart Firefox without having to restart the computer?

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• Office Jet 6100: Remove the printer tray

  How did the paper tray removed for transport?

  Hey @Merlot856,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you are looking to remove the tray paper from your printer Officejet 6100. The tray is not removable on this printer. I suggest a larger box or be extremely careful when moving the printer so that the tray is not broken.

  I hope this helps and I hope you have a great week!

• Can not remove the print server role (Windows server 2012)

  I have a small question... I'm trying to remove a role (print server) on my Windows Server 2012. (Yes I know, I need to go to "Add/Remove role")

  

  but each time, the server establishes the uninstall procedure, but when it's time to restart and complete the procedure... the server fail and cancel everything... so in the end I always install the print server.

  

  I try to stop a link of service in this role (as a spooler, printing...) but samething.

  If anyone can help me, I really appreciate it.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• HP Photosmart C4795: remove the printer to computer

  I have a HP Photosmart C4795 who stopped working so I bought another one same model c4795 and my question is that I have to remove the old printer to my computer before I plug in the new? Also I don't have a cd for the new so I can use the old cd? Thanks for any help.

  Hello

  As it is the same model, just go to devices and printers, the existing printer right click and select remove device.

  Onece the device removed, click Start > programs > HP > your printer model and select Add a device.

  Follow the steps on the screen by selecting the link required to set up the new printer.

  Please let me know any questions,

  Shlomi