My Canon 530 printer sharing problem?

Similar Questions

• Canon i850 printer shared by Windows XP and Win7 does not print the entire page

  I've just updated my Vista laptop to Windows 7 as a place to upgrade. All migrated without problem except this shared printer. I downloaded the updated driver from MS download the catalog and the Win 7 Add the fron Canon pack I have installed in that order. The printer is connected to the desktop from Win XP to USB and is configured as a shared printer. Windows 7 sees the printer and also its status but print a test page prints only the windows of the flag in the upper left corner of the rest of the page is empty. Print directly to the printer under Win XP works perfectly. All ideas are welcome. Thank you.

  Well, I've had sorted it here's what I did:

  Removed all instances of canon i850 of devices and printers in Win 7.Rebooted, and then at the Run prompt run this command, "Printui/s/t2" without the quotes... Removed the i850 canon drivers and packages, then restarted again. Then I turned on the printer and plugged into a USB port on the computer to Win7... It installed the driver for me to Windows Update and a USB driver. I then added a printer shared in devices and printers selected local printer and set up the port as: \\xp computer name\share name\. I chose the same driver in the list that was created previously Setup USB canon i850... Restarted then installed the Canon Add / on module: aomwin110ea23us.exe. Restarted again... NOW, I CAN PRINT!

  Nice day.

• Printer sharing problem

  I'll keep this short because I think that there may well be a simple solution!

  I had a network of 5 computers to work (all XP) with a Canon ip4600 shared printer. Following a failed motherboard, I now have a box of Windows 7 (64-bit, I discovered today). All works well for file sharing, but the printer installation via NM 5.5 pro will not accomplish.  When asked to do hangs just of NM (I left it for 2 hours).

  I suspect that it is because the printer is installed on XP 32 bit and the '7' box wants 64-bit drivers, but I can't think how to do this job all together again.

  I tried to install the printer locally on the '7' box, but I really don't want to use it as a server, so I have not tried that still share the path. Local install didn'ty help NM, though.

  Any suggestion would be appreciated.

  Hello

  I pulled out my hair for about half a day asking about the same problem. I found a solution to workaround/good on a windows forum. Here is the link, hope it works for you too.http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/523a479d-c197-40b3-a633-078d80d79eb1/

• Win 7 - XP network discovery (file/printer sharing) problem HELP

  Guys, please.

  Post here the list of all Windows 7:
  SERVICES |
  PROTOCOLS |
  DRIVERS |
  REGISTRY KEYS |
  FILES |
  PERMISSIONS |
  and anything else necessary to restore network configuration/connection, Discovery Network and the printer file sharing within a group residential with different Windows versions (win 7 - x 64 - ult, XP pro sp3, XP Home, wireless devices).

  All ping each other perfectly, networked computers have access to internet through powerful router, each of them receives predefined IP from the dhcp server on the router automatically, but still can not see each other in a working group (it was fixed accurately on each machine). I also tried to createa join and sever a homegroup on win 7 and installed the responder LLTD Link Layer Topology Discovery () I would like to see finally a xp machine on network card (without access and not in 'network')
  Advanced sharing options have the value recommended, firewall is disabled and uninstalled antivirus software.
  
  However I access an XP machine fom the other and can access files of Win 7 on my IPad, but neither Win 7 see XP or vice-verse, and when I try in win 7 to access its own share files on himself through the 'network' says network error with the code «0x800704cf» "Convenience store" did not help.

  (permissions? group policy? bug registry? mediacenter? what else could have caused the problem?)

  Everyone please, don't crowd in the topic suggestions to check all the above, I've done hundreds of times. Please understand that just post something here I asked can help thousands of people have their network problems sold due to tons of discussions related to this topic.

  (Thanks in advance and sorry for my English, I'm from the Ukraine)

  Hello Goshkin,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• Canon printer this print spooler problem

  I have a printer canon set up a network for the last 12 months without a problem.  Today, when I press print, the document goes to the spooler, but does not print.  Only when I restart the computer will display the items.  All other computers on the network are not performed.  According to the Canon when I called them, they said that I had a problem of print spooler.  The spooler is set to automatic and when I manually restart the spooler prints the item.  The printer driver has been reinstalled and I am sure this isn't the printer.  How can I solve this problem, then the element I want to print, print when I press the button? If the computer is connected to the router by cable, this problem does not occur

  Hello
   
  You can follow below link that can help you to solve your problem:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows7-64x-and-Canon-LBP7200CDN-print-spooler/a7485628-5790-44DD-9864-b48650afe0aa

• File and Printer Sharing for Microsoft Networks-problem

  Hi all
  I use pc (vista HP 32 bit) sharing-i ' ts works great except one problem:
  what I do, the check mark of V in "sharing files and printers for Microsoft networks".
  is disabled / be empty after each reboot of the pc - and I have to manually check and click OK again.
  How can I fix this and make "File and printer sharing for Microsoft networks" checked permanently?

  (I use the network server private & computer browser Services work. I do not use the password protected sharing)

  Thank you

  http://www.Vistax64.com/attachments/tutorials/2609d1232212061t-file-sharing-turn-off-network_connection_properties.jpg

  problem solved:

  It was Lenovo access connection network for lack of security settings.

  Thank you

• Problem to a file/printer sharing network.

  Hello

  I want to do a network to share files, printer and internet. I have already shared the internet by all connection to the access point devices through wireless and connecting the access point to the cable modem, but I can't share any file or folder.

  I tried many things to create a small network of win xp, but I failed.

  I have a wireless access point Dap1150 D-Link wireless modem 1 billion for the ADSL2 +, a PC (win xp) with a normal network adapter and an external wireless LAN adapter + a laptop (win 7) which has two cards and support network wi - fi.

  Please help I have searched a lot but I couldn't find anything useful.

  H

  Assuming that the "billion for ADSL2 wireless modem + ' is a router, and it is configured as one.

  Since you have a Windows 7 computer too, the network must be configured take into consideration.

  -------------------------------

  Maybe this can help.

  ---------------------
  

  The following looks like a long history (it's only 600 words). I know not what is knowledge of the user, and exactly what has been done already. The info go through the motions of the configuration and verify most of the common aspects of the LAN Windows OS features '.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  -----------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  ** Note . All the users who are allowed to share need to have an account on the computers they are allowed to connect to everyone is an account, that means a group of all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Home premium to Windows 7 64 bit - ip 2700 canon will print is no longer

  This printer will print the test page when prompted, but won't boot with the word perfect or word or documents of any software.

  This printer print for 1 day. Canon has been contacted and updated drivers have been installed.
  A check of the log of application for printing services services - identifies a spooling print error 2114 - could not share printer on the network. This error started with a connected printer earlier and continuing with this printer.
  Can someone help

  Try to run the troubleshooting of the printer utility.
  Click Start.
  In the search bar, type troubleshooting.
  Select the printer in the list and click Next.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Step 2:
  Also update the printer drivers in the Device Manager. Click Start and in the bar search devmgmt.msc and press ENTER.
  Step 3:
  Accounts of comments WE turn on both computers.
  Step 4:
  Configure file sharing / print:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Turn on WE network discovery
  Turn ON file and sharing printers
  Put IT in the section sharing public folder
  Turn ON password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, running on Windows 7 sharing files and printer as above will take care of this for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine. With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. Don't STOP FIREWALLS; CONFIGURE them PROPERLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT CREATE PASSWORDS, EVEN IF ONLY the MOST SIMPLE . If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers.

  Troubleshoot network printer:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
  For your reference:
  why cant I print http://Windows.Microsoft.com/en-us/Windows7/
  http://Windows.Microsoft.com/en-us/Windows7/printer-a-part
  http://Windows.Microsoft.com/en-us/Windows7/Install-a-printer-on-a-home-network
   
  PIXMA iP2700 - replacing a FINE cartridge

  Contact Canon for more help.
  Canon Europe - contact US

• Printer sharing via LAN - EPSON XP-335

  Hello

  We use 3 Macs connected via LAN (Ethernet, we do not use Wi - Fi).

  I have connected an EPSON XP-335 via USB to Mac #1, and it prints fine.

  On all Macs, I installed the software EPSON printing and active "Sharing printers", via preferences > sharing.

  but when I try to print from Mac #2 or #3 I get this message "not connected":

  

  What should I do?

  Thank you very much.

  Hi coxorange,

  Please use the Apple Support communities for help. From your post, I understand that you are unable to access the printer that is connected to one of your iMac, others in the House. I know it's nice to be able to print from all of your devices, so I'm happy to help you to provide advice for this.

  From the information you provided, it seems that there is some confusion about the way the printer is shared on your devices. In order to have a shared printer, you must only share from the computer to which it is connected. From there, you can connect to this printer with other computers. Perform these steps on the iMac to which it is attached:

  How to share a printer:

  1. Open sharing preferences if it is not already open (choose Apple menu > System Preferences and click Sharing), then check the box print sharing.

  2. Under printers, select the printer you want to share.

     When you share a printer, all users on your network ("everyone") can use by default. If you want to restrict access to specific people, go to steps 3 and 4.

  3. Click on the button Add at the bottom of the users list, and then do one of the following:

     • Select a user in users and groups, that includes all your Mac users.

     • Select a user from the network or users groups network, which includes everyone on your network.

     • Select a person in your contacts. Create a password for the person, then click on create an account.

  4. When you add people to the list of users, access to the shared printer is reset to no access for the users of your network ("everyone"). To provide access to everyone again, click the triangles, then choose can print.

  Source: OS X El Capitan: share your printer

  Once the printer is shared, you'll want to implement on your other computers. Check out the second section of this article, titled "Add a Wi - Fi or network printer":

  OS X El Capitan: Add or remove a printer

  If you continue to have problems with your printer setup, here are some additional articles that may help you identify the problem:

  OS X El Capitan: print troubleshooting

  Troubleshoot printer on your Mac

  I hope you have a great rest of your day, cheers!

• Canon MX850 printer not verified by El Capitan

  Hi - I have El Capitan and tries to install my wireless Canon MX850 printer. I installed the latest drivers for Canon (11.7.1.0) and put in place the printer in printers and drivers. However, when it comes to test the printer, it does not. The printer is connected via wifi. Router is fine, other computers can access. I tried the fixed IP address - but that doesn't work either. It is simply not to find it. Any ideas?

  This means you enter wrong IP address in the configuration dialog box, you select a communication protocol that does not support the printer or the printer is inaccessible on the network. If you try to use a shared printer from another computer or from a device such as a router, verify that the printer is actually shared. OS X printer sharing could be disabled without your knowledge.

• T61 file Microsoft XP - pro and printer sharing uncheck on Intel(r) 82566 NIC M after reboot

  I check the file Microsoft and sharing printers, but after reboot it is not checked for Intel (r) 82566 NIC connection profile M.

  Anyone else seen elsewhere or fixed?

  Problem setting in the section security for the profile in Thinkvantage Access Connections; He was set to cancel Microsoft File and printer sharing.

• Want to 5640 e - Allinone: HP Envy 5640 cannot print without problem indicated

  My hp wireless want 5640 e - Allinone scanner/printer all of a sudden couldn't print more with no error showing.

  This printer has been used very frequently and it used to work well.  However, I kinda stopped using it for about 2 weeks, and today when I tried to print, whenever I sent a document to print, the printer status showed 'Impression' and suggested that the documents have been printed successfully; However, the printer was actually nothing.

  I tried to uninstall/reinstall the hp printer driver for several times, used hp print and scan doctor showing all the controls without error, turned off the firewall, checked the wireless connection for my laptop and the printer and even used a USB to connect my laptop and printer, but still failed to get a response from the printer.  Fortunately, he was able to print an internal test page by printing HP and scan doctor, but not a test page.  In all these processes, the State of the printer was still showing indicating "Ready" for printing without error.

  On the other hand, my printer have been able to print several documents sent from computer laptop of my roommate via connection Wi - Fi, and my laptop would have also ordered my roommate, a Canon one printer, to print via wifi.

  This situation has botherd me all night and I'm actually much more dependent on the printer now that the school year has started.   I really hope that someone can solve my problem and I would appreciate his helpfulness.  Urgent need of your help!

  Thanks in advance,

  Willow

  Hey Willow.

  I see that you are having a problem wireless printing using your printer HP Envy 5640.

  If your roommate can print using your printer wireless, then I think that there is nothing wrong with his connection.

  To restore the State of your printer, you can try to do a Hard Reset. Simply unplug the power cable from the wall outlet, then to the back of the printer. Wait at least one minute, then plug it on both ends. Normally the printer will power on automatically. If this is not the case, simply press the power button.

  Blue wireless light should remain solid, once the printer is powered completely.

  On your PC, go to run by pressing Windows + R keys on your keyboard.

  Type services.msc and Services window should appear.

  Restart the services listed below by right-clicking on them and selecting restart. If it has not started yer, select start.

  1. print spooler

  2 IP Helper

  3. web client

  4. network access protection agent

  Try to print all your documents and see if it will work.

  Hope this will help.

  Nice day!

• HP Deskjet 5550: Printer sharing via Router/USB?

  So, I have an ASUS router with EZ printer sharing function. I have connected my printer to the router via USB but I can't find the printer in windows. When I surfed in to my router, I see the printer via the firmware on the router and the router has detected my printer model.

  I tried with the only available software for my printer, nothing helps. I also downloaded a software from ASUS, same progress. Any suggestions?

  Router ASUS RT-AC51U

  HP Deskjet 5550 printer

  10 Windows 64-bit computer

  Apparently I had to install an ASUS file on my computer, I just tried to run WinRAR. Problem solved!

• My Canon MX330 printer is not printing and the In use/Memory light on.

  My Canon MX330 printer is not printing and the In use/Memory light on.

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon.

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MX330 - software and drivers<- select="" your="" version="" of="">
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mx_series/pixma_mx330#ServiceAndSupport

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have a Canon ip6600D printer which only becomes an error 6500, cleared error now no printing

  I have a Canon IP6600D printer and today it started acting.

  First of all, I found it turned off earlier today and I had problem trying to lights up but finally did and received an error message indicating an invalid legacy was plugged in to the printer - remove the device.  Nothing new has been connected to the legacy just usb that connects to my laptop.

  After about an hour of playing with the printer, unplug the unit, unplug the USB cable, turn on / off power with and without the USB cable, the message changed to an error message 6500.

  I played with it for about an hour, trying several things, on and outside, opening the lid with the inks and pressing the power button, etc... saw a message about a reset, which doesn't seem to work at first, but I tried once more to the power of the printer and everything seemed fine.  He showed several inks were out, so I replaced them with new cartridges and now no impression at all!

  I tried to send a word document that is black and white, went by his movements, seemed it was printing, but the page is empty.  I tried to send a picture of the PC - again took time to print the photo, but the page is empty.  I tried to use an SD card to print a photo and even once - took time and sounded like it was printing, but the page is empty.

  I tried to clean the heads, print an alignment page, etc..., all the basic things to correct the wrong impression but still nothing but perfect blank pages - no ink at all.

  Any suggestions?

  Hi Stevenoh,

  It is recommended that you contact the direct technical assistance. There is NO charge for this call. Information in real-time to a technical assistance call live would be very beneficial in this case.

  Please call 1-866-261-9362, Monday - Friday 10:00-10: 00 ET (excluding holidays). A Canon technical support representative will be able to solve this problem more quickly.