My card is authentic?

Similar Questions

• Authentication card smart - authentication certificate user

  I am developing an authentication solution for BlackBerry based on cryptographic SIM cards. I managed to create a pilot smart card reader and a driver of smart card using the RIM Crypto API. The use of these two, I'm able to import a
  certificate stored on the SIM card, enable the authentication of users in two phases that checks the password device and the STEM to the certificate. I can also set up a TLS session using private keys and certificates stored on the card.

  However, when you try to activate the "Authentication certificate" option in the password options panel, I encounter a problem. After selection of the certificate and click on save, the device asks me to enter the password device and the PIN smart card, what I'm doing. Debugging tells me, that the PIN is properly checked with the card. Subsequently, a 'Card access smart' popup appears with information that the 'Options' of RIM application attempts to access the card with the information "the private key will be used to initialize authentication certificate". When I enter PIN code OK, I said: 'failed to initialize authentication certificate. Check that the certificate is not on the smart card used for two-factor authentication. »

  Can someone tell me why this is? Must the certificate be special in some way (content, restriction of the use of the key etc.)? The certificate is obviously present on the map, as there is for example a client certificate for TLS sessions setting. Also, what makes this "initialization" all of the average of certificate?

  Well, I think I'll answer myself that I managed to solve this problem

  After some debugging I realized that:

  • After the second PIN prompt appears, the method of signRSA (net.rim.device.api.crypto.RSACryptoSystem, net.rim.device.api.crypto.CryptoTokenPrivateKeyData, byte [], byte [], int, int, java.lang.Object) in our RSACryptoToken extension is called
  • This method gets a context (last parameter) object, which is a SmartCardSession
  • during the processing of the request of sign (cf. the smart card and examples of smart card of RIM drive) must not create an another smart card session, but instead reuse the provided in the framework.

  Trying to establish a new session of chip due to the demand to block, because the sessions are exclusive, i.e. only can be opened simultaneously.

• W700 i5 wireless certificate does not

  I'm trying to connect my tablet to my corporate network, but do not accept the certificate for the connection.  I have a laptop windows 8 HP that connects without any problems and the acer tablet will connect to the company network comments without problem.  I used the same settings of the computer laptop windows 8, up sitting the two devices side by side and comparing each screen in the Setup wireless for the network, but without success on the tablet.

  I have connected to my router dlink at home, the guest network uses the same cisco network hardware to connect the corporate network, and just about every store\restaurant I went to that wireless connected on the first try.

  I tried without downgrading the driver to previous 2 versions of the pilot but remained without effect.

  Is there a problem with the integrated certificate based card wireless authentication?  Has anyone else experienced using a certificate based authentication with wireless that worked?

  Installation of the new driver on the download page and now my network works as it should.  No problem connecting to the certificate based network and in addition to this, every 5 seconds stops when the connected network are gone.  On all the driver this update solved all my problems of network.

  10.0.0.225 driver version

  (Also have a ready model HP HP which is not on the market, but which had the same problem, seems to be a problem of qualcomm isn't a problem of Acer\HP.  Update the driver qualcomm on the HP fixed the same issues I had with it.)

• HELP the HELL Sandisk 32 GB Extreme 30 MB/s slow test?

  I bought do not understand that there are a lot of scammers out there. BobobUk a seller on eBay sold me one card 32 GB Extreme which is rated at class 10 and 30 Mbps.

  Using my portable player and H2Testw, recommended here, I found:

  The write speed is 6.95 MB/s while the speed of reading is 3.06 MB/s.

  It's in my portable player tested. The speed may be wrong or a sign of a fake card? Or is it my drive on the laptop?

  What it should be in terms of speed? I use my SD.MS/Pro/MMC/XD player on my laptop, its a so so old HP Pavilion dv9000, on Vista.

  What should I do?

  HERE IS THE RESULT:

  30424 write took 1 h 12

  Audit 30424 took 2 hours and 45

  Test completed without error.

  You can now remove the *.h2w of test files or check out them again.
  Write speed: 6.95 Mbps
  Playback speed: 3.06 Mbps
  H2testw v1.4

  Thank you very much.

  Concerning

  assuming that the card is real, it is likely that the drive of the laptop causing the transfer speed slow. most laptop manufacturers use the slower cheaper drive possible. You can contact technical support sandisk to confirm if the card is authentic and if it is I would recommend to get a player of USB higher speed like the one below.

  http://shop.SanDisk.com/store/sdiskus/en_US/DisplayProductDetailsPage/parentCategoryID.11443000/Cate...

• 90 MB/sec Sandisk Extreme SDHC?

  Hi all

  I found this product on Amazon, sold by Amazon directly.

  

  http://www.Amazon.com/DP/B013CP3KZ6

  I don't see this item on the official website of Sandisk.

  This could be a fake? Just to be safe, I bought the 'old' version 60 MB/s, but if this turns out to be a fake, even the authenticity of one I wonder.

  Hello

  If the card was sold by amazon directly then the card is authentic, and you can use it normally. In order to be 100% sure, you can also contact sandisk support to ask them if this card exists.

  You can contact them through this link

  http://www.SanDisk.com/about-SanDisk/contact-us/

• Impossible to download CF

  Hi, I bought a card Kingston 16 GB compact flash for my Sony Alpha 350 DSLR and while this works very well in the camera (pictures are visible), I'm unable to download any of the photos via a direct connection or card reader - Vista (SP2) does not recognize the card. I tried other USB ports and also my work computer, and nothing works.  Kingston confirmed that the card is authentic and it should work fine.  Any ideas?

  When the camera is connected or the memory
  card is in the reader... to go to... Start / computer...

  Is the camera or player recognized by a reader
  Letter? Probably tell... Removable disk...

  If_Yes_right click on the drive letter which corresponds
  for the photo/player device and in the menu...
  Choose open or explore.

  This should display the directory of the memory
  Card and let you copy and paste the content to
  a folder on your hard drive.

  For the camera/card to be recognized automatically.
  You can meed to adjust your AutoPlay settings:

  See the following links:

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings Windows Vista: How to customize AutoPlay
  http://www.vista4beginners.com/AutoPlay

• KB931125 Rompt Web server authentication by smart card...

  Windows 2008 Enterprise SP2 IIS7

  The Web site is authenticated against AD with smart card.  Works great... until KB931125 is installed.  As soon as this update of root certificate is installed, all customers get 403.7 error.  I'm going back the VM to the snapshot before KB931125 was installed and everything works well again.  It don't seem to be a way to delete/cancel the damage inflicted by this update of root certificate.

  I found this post: http://msmvps.com/blogs/bradley/archive/2007/03/01/warning-problems-with-root-certificates-update-kb931125.aspx and cleaned on the certificates, but it is not always correct it.

  Please notify.

  It turns out that I'm not a not delete simply not enough of the root certificates.  It works now after the removal of about 1/2 of them.

• mutual authentication failed in the emv card.

  I try to send the STORE_Data command on my EMV card to store values of the IMB. Here, I got a document that describes the APDU command to install and customize the application EMV on JCOP 2.4.1 revision 3.

  Here, in the document, command sequence is similar-

  SELECT
  INITIALIZE UPDATE
  EXTERNAL AUTHENTICATION
  STORE DATA FOR DGI
  ...
  ...
  STORE DATA FOR DGI.
  
  

  Line written in this Document is - "securitythe key value of the issuer field (encryption, MAC and key encryption key): 404142434445464748494a4b4c4d4e4f." and the value of the sequence counter 0

  
  

  I just downloaded GPSHELL 1.4.4 and try to run the following script:-

  mode_211
  enable_trace
  establish_context
  card_connect
  select -AID A000000003000000
  open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
  card_disconnect
  release_context
  
  
  

  and I got the output as:

  D:\users\Amitp\My Documents\Downloads\GPShell-1.4.4\GPShell-1.4.4>GPShell.exe he
  lloInstalll.txt
  mode_211
  enable_trace
  establish_context
  card_connect
  select -AID A000000003000000
  Command --> 00A4040008A000000003000000
  Wrapped command --> 00A4040008A000000003000000
  Response <-- 6F658408A000000003000000A5599F6501FF9F6E06479100783300734A06072A864
  886FC6B01600C060A2A864886FC6B02020101630906072A864886FC6B03640B06092A864886FC6B0
  40215650B06092B8510864864020103660C060A2B060104012A026E01029000
  open_sc -security 1 -keyind 0 -keyver 0 -mac_key 404142434445464748494a4b4c4d4e4
  f -enc_key 404142434445464748494a4b4c4d4e4f // Open secure channel
  Command --> 80CA006600
  Wrapped command --> 80CA006600
  Response <-- 664C734A06072A864886FC6B01600C060A2A864886FC6B02020101630906072A864
  886FC6B03640B06092A864886FC6B040215650B06092B8510864864020103660C060A2B060104012
  A026E01029000
  Command --> 8050000008FB3EE9FE0812ABFF00
  Wrapped command --> 8050000008FB3EE9FE0812ABFF00
  Response <-- 0000322000186396921901020000CEBCF3A2D47130C736B6480E4DD59000
  mutual_authentication() returns 0x80302000 (The verification of the card cryptog
  ram failed.)
  
  

  Why is this authentication failed here? To send the command to store I must past this control. any suggestion / idea help me out of this error.

  Thanks in advance...

  I can reproduce the cryptogram of the map with my tool

  KeyDiv	: 00 00 32 20 00 18 63 96 92 19
  KeyInfo	: 01 02

  SequenceCounter: 00 03

  CardChallenge: 70 73 2 c F3 B5 DB

  CardCryptogram: 77 3B 2D 91 35 F6 ED B4

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 02 00 18 63 96 92 19 0F 02 F0

  generated kmac: 63 59 D2 9 63 B8 6 b 1 91 68 F4 3 C 4 b 27 F6 AD to

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 F0 01 00 18 63 96 92 19 0F 01

  generated kenc: 11 CB 6 b 70 AB E0 5F B1 23 D6 22 88 38 EB 3A E1

  Last 6 bytes of KEYDATA: 00 18 63 96 92 19

  Entrance to the triple of the 18 ECB:00 63 96 92 19 03 00 18 63 96 92 19 03 0F F0

  generated ENCs: 21 DC A5 B4 b 21 17 47 72 02 77 4, 58 F3 EB 6 b 8,

  Session CNTC: 6a B9 66 F2 B2 8F 11 49 31 FE 5F 77 04 0E B4 A5

  Session of the CCMC: C4 F0 42 64 F4 BD 2 8 BEING 52 06 1st FF 1 has 00 4F

  Session RMAC: F7 2 b 72 74 and 74 82 15 6 73 67 05 E6 52 17 B6 E5

  Session ENCS: E3 90 86 E6 F8 8F 58 BB D0 77 A2 0E 0E CF 9 d B2

  Calculated Card Crypto: 77 3B 2D 91 35 F6 ED B4

  Now ext authenticate.

  Cryptogram of the calculated host: FD 89 A6 AB 1 b 6 06 E1

  APDU to wrap: 80 82 01 00 08 FD 89 A6 AB 1 b 6 06 E1

  Your cryptogram of the host is very GOOD, but the MAC is not!

  The cryptogram is done with Kenc

  the MAC is made with Kmac

  Here's how: this method can be used for any APDU after ext authenticate

  block length: 3

  Apdu using updated MAC calculation

  entrance to the SCP02 C - mac calculation: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 80 00 00 E1

  Ext-AUTH: 84 82 01 00 10 FD 89 A6 AB 1 b 6 06 AC 32 6 a 86 3 a DC C8 DF E1

  I read your message:

  1. -------------------------------
  2. mac session key generation
  3. ------------------------------
  4. KENC: = DES3 (KMC) [00 18 63 96 92 19 02 F0] | DES3 (KMC) [00 18 63 96 92 19 0F 02]
  5. = 6359D29C63B86B1A 9168F43C4B27F6AD

  I agree, the KMAC is correct, even if you named KENC

  At this point, the ICV is zero

  The mac algorithm is MAC final retail (single with final MAC of triples)

  Make sure that you do not mix the key pieces to use for the only part OF THE, here, it should be C4 42 F0 64 F4 BD 2 8.

  Also make sure that you calculated the MAC with the CCMC, not the MAC KEY DERIVED SESSION KEY because I think that you did!

• Card reader chip as a pass through for VMware View 5.1 device (NOT USED for AUTHENTICATION)

  I try to get a USB Smart Card Reader * to work on related under VMware View 5.1 clones

  * not as an authentication device, just like a transmission of smart card reader

  Not tried:

  1 activated pass through card reader in the registry for the VMware view client

  2. active "allow redirection of card reader" in the policy active directory

  3. customer connected to view, selected USB drive list, connected to the customer

  After that, the card reader will appear with a "generic smart card", but it does not actually work.

  We executed the diagnosis of the smart card and he pointed out that the drivers are ok and windows service is ok, but the map can not be found.

  PS: When we tried first, about 2 weeks ago it worked, but it has suddenly stopped working. (Needless to say that the virtual machines and the Clients were restarted several times).

  Check that you have not installed the "PCoIP smart card Redirection" option during the installation of the agent. If it is present, it will redirect calls made RDP client smart card. Because you use a 'local' to the desktop USB drive, you don't want to do.

• Smart card authentication does not

  I am currently configuring a deployment view in our environment.  Installation requires that we use smart cards to connect (Aladdin eToken Pro).  I have the aladdin software installed on the client computer.  When I run the client to view I don't get invited to my PIN and instead get a message indicating that this smart card is required for the connection.

  Smart card for my domain authentication is working because I need a smart card to connect to our current physical machines.

  Has anyone had an experience getting the aladdin etokens to work?

  Thank you

  Casey Shenberger

  It's really weird.  I don't expect this step to get this part working, but I guess stranger things have occurred.

  In general, the answer to your question is to set the GPO of Agent 'AllowSingleSignOn' to false/stop.  Then the SSO will not be attempted in remote desktop.  If, as you say, you don't want users to have access to the smart card reader in the remote desktop connection or for use with applications, the next step depends on the Protocol.  If the end users use PCoIP, then it seems that you do not want to install the Sub-function "PCoIP Smart Card" of the agent Installer and devices will not be redirected.  If end users use RDP, then use one of the client group policy to turn off the smart card redirection.  In my view, there is also a PCoIP GPO to do the same thing (or he respects the GPO of RDP, offhand, I don't remember that one).

• Only smart card authentication

  What is this new version of broker VDI only smart card support? I know it was something that works on VMware.

  Hello

  VMware View 3 does support authentication of card chip. You can choose mandatory or optional.

  Thank you

  Christoph

• Authentication required each time new sim card entered the Iphone

  After the new update apple this week of May 18, 2016, whenever you change the sim card, you will need to re - authenticate your apple ID.  It's very embarrassing for people who travel often and use the dual sims or will frequently use different sim card for different countries.  It's that apple has not even given the user a choice to turn off his mandatory.  Especially when you travel to a new country and buy a new sim card and activate it using your iPhone, it becomes almost impossible since you need to first find a journal in your iPhone and then active sim card wifi, making it an extremely difficult process.

  While some may want this feature, it is not logical for everyone. Ask apple to make this optional choice / deleting it or explain how to get rid of.

  Your iCloud account and iMessage active on the phone?  If so, Yes, it will require you to do whenever you change the SIM card and that is never going to change. You can try to connect on iCloud, iMessage and FaceTime and see if she is no longer doing this.  But as long as you use the services of Apple (and find my iPhone with iCloud), which are related to the phone in use with the device number, you will be prompted to confirm whenever you switch SIMs.

• Authentic SD card?

  I just got a card class 4 16 GB sandisk micro sd on amazon and on the map he reads to Japan instead of China. Maybe it's a fake ID?

  Ah, I see States ad "bulk packaging", not in retail packaging. So yes, I suppose they might look different. Memory cards are sold in bulk mainly to suppliers such as phone makers, the camera makers, etc. for them to include in their product. They must be visually and easily differentiate retail counterparts.

  You can usually get a better price on cards in bulk, but also be aware that SanDisk is not any guarantee of these elements. Only the cards sold in retail packaging (or with retail series # appropriate) have warranties on them. So if you have a problem with it, you have no recourse but to buy another card. And which generally denies the savings that you see on the purchase of the item of packaging in bulk in the 1st place.

• card network said authentication attempt

  My wireless card is up to date and I have an acer with windows 7 home prem and im wondering how can I go about fixing the adapter... troubleshooting does not work all it says is that my network adapter does not work correctly or my access point. Another computer on my network can connect perfectly well and has no problem... ive tried everything please help

  Hello

  Assuming that wireless router is configured correctly, it is a signal and the wireless card on the computer is physically in.

  Maybe this can help.

  These steps and tell us where is the breaking point.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  ------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there is Wireless Utility a seller is not running with the native Windows wireless utility (Service WLAN).

  ----------------

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd AV/Firewall/security software part, s costume keep blocking aspects of Local traffic even it they are off (disabled).

  If possible set up the firewall correctly, /Security costume otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

  ---------------------------------------------------

  A message in the small window that says connected wireless doesn't means that you are really a valid functional connection.

  Above everything is OK, you must be able to connect to the router.

  Connection to the router means that you can enter the IP of the router base in an address bar in one go, being able to connect and configure the router menus see.

  If it doesn't connect to the router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

• BlackBerry curve 8520 locked to smart card authentication. The phone says PIN does not and is not true.

  Hi all
  I have a big problem. I'm testing my smart card pilot in a BB 8520 curve. If someone wants to work with the BlackBerry Smart Card Reader and smart card a not suported must implement a smart card driver. And wthat I did.

  Everything works fine until it played some erroneous password settings results in the block of the card, and obviously I can not unlock the phone. I have

  The problem is that, although I've unlocked the map etc now the phone still saying that the pin code of the card is wrong. I'm sure I'm in the well axis and the problem is not on the driver code. It's as if the phone has been collapsed and always says that the spindle is bad.

  I tried many things and nothing works. I reset the phone, I deleted all the data, I reinstalled the software, everything, but I still get the locked phone.

  I guess this could solve by modifying the COMPUTER policies for passwords or something like that. I don't know, I'm not just a BlackBerry user. I only do it for work.

  I'm desperate. Could someone help me? Any value idea for me. I have a backup of everything, so I don't worry about what was the solution.

  If you think that you should put this post in another part, please let me know.

  Is attached a picture to show exactly what is happening to me. The DIF is on the PIN to the chip card. The other password its ok.

  

  Thank you.

  OK, I solved the problem.

  I made a backbup, then I did a factory reset password bad presentation 10 times, and I have restored the backup.

  I know that he's not a nice solution, but in my case was salvation!