Authentic SD card?

Similar Questions

• Change the authentication of card network from WEP to WPA 2

  I have the WNDR3400v2 of Netgear router. I have a laptop with win 7 and another on Windows 8. I have Time Warner cable internet service.
  Currently I use a security key WEP with it as advised by netgear support in the early stages of the installation after the purchase of the unit. I realize that the key WPA2 is stronger than the WEP key. I should have told this by the customer and must have helped with WAP2 key features. But now I'm with WEP security key.
  I intend to change the current WEP WPA 2 security key.  After going to the settings of the router on www.routerlogin.net, I changed the security to WPA2 key
  After removing the netoworks previous, I added network manually in Control Panel of Windows 7 (add notwork wireless) and I tried to follow the instructions, I can see the network in the list of available networks but cannot connect to it. Radio message Intel says failed to connect with the DHCP server. Wired internet connection works fine, but no wireless connection. I'd appreciate any help on this matter.

  I was able to reset the router if you plant. After that, the parameters have been a piece of cake. Thank you very much for the help in this regard. I don't know why he did not cooperate before you restore it. In any case I appreciate it. Thank you.

• Only smart card authentication

  What is this new version of broker VDI only smart card support? I know it was something that works on VMware.

  Hello

  VMware View 3 does support authentication of card chip. You can choose mandatory or optional.

  Thank you

  Christoph

• Authentication failed-2008 NPS of VPN from Cisco IOS

  I'm trying to authenticate VPN connections to a Windows 2008 Server NPS Radius server.

  Local authentication works very well.

  This is the cisco configs:

  AAA new-model
  AAA authentication login default local
  AAA authentication login VPNauth local radius group
  local AAA VPNgroup authorization network
  AAA - the id of the joint session

  radius of the IP source-interface Loopback0
  RADIUS-server host x.x.x.x auth-port 1645 acct-port 1646 button 7 xxxx

  list of authentication of card crypto VPNMAP customer VPNauth
  card crypto VPNMAP VPNgroup isakmp authorization list
  crypto card for the VPNMAP client configuration address respond
  map VPNMAP 10-isakmp ipsec crypto dynamic dynmap
  ...

  ... other cryptographic controls

  This is the section of the NPS logs:

  Information about authentication:
  Connection request policy name: VPN
  The network policy name: -.
  Authentication provider: Windows
  Authentication server: x.x.x.x
  Authentication type: PAP
  EAP type: -.
  Identifier for account: -.
  Results of logging: Accounting Information was written in the local log file.
  Reason code: 16
  Reason: Authentication failed due to incompatibility of user credentials. The provided username is not mapped to an existing user account or the password is incorrect.

  I have PAP enabled on network connection request policies /...

  I'm stuck

  Help, please

  You can run a "nipple aaa"command to see if the user can be authenticated successfully?"

  I think this might be a configuration problem on the NPS server. You can google it. Here is one that I have found, refer to the position of "irishHam".

  http://social.technet.Microsoft.com/forums/en-us/winserverNIS/thread/bfbbbae4-A280-4b3f-B214-02867b7d33e3

• How to enable Single Sign On RDP on Win 7

  I telecommute from home using RDP to my workstation.  The two machines are Win 7 Pro.  We went to smart cards just for more than a year.  Right underneath a year ago we started having problems when reading maps Service would crash when processing authentication by card reader.  This required a local reboot.  (If you have any idea why that was happening I would hear it, but this is not not the subject of this question I have had no luck tracing the cause of this error)

  Login using RDP launches 2 authentication of card reader. The first seems to be initiated by the customer, the second by the host.  The first still works fine, the second sometimes throws an error that causes the card down reading Service.

  If I enable Single Sign-On on my client, I think I could avoid the second round of authentication and its related errors.

  Here's my problem.  It seems that I need to change the group policy to do this and gpedit.msc is not distributed with Win 7 Pro (at least that's what I read and is not on my machine).

  Is there a way to set the SSO on Win 7 Pro?  I use the VPN for the client and the host must be on the same domain.

  Thanks for your help,

  Dan

  Hi Dan,.

  Thanks for posting your query on the Microsoft Community. If I understand correctly that you are referring to RDP, I suggest you post this query on Technet Forum. Our Technet Forum support team will be more than happy to help you. Please click the link below to do so:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  For more information, do not hesitate to contact us. We will be more than happy to help you.

• A Site with IPsec without restoring a new tunnel

  Hello, I have a question about IPSec S2S.

  Network.PNG

  

  In this topoloy, I would like to that IPSec S2S between 172.21.0.0/24 and 172.22.0.0/24.

  The serial line is the first priority and route on ISP is the second priority for routing.

  The question is how can I create the IPsec Site to Site connection without restore when the routing path changes?

  The AR configuration:

  !
  version 15.1
  no service the timestamps don't log datetime msec
  no service timestamps debug datetime msec
  no password encryption service
  !
  hostname AR
  !
  !
  !
  !
  !
  !
  !
  !
  no ip cef
  No ipv6 cef
  !
  !
  !
  username cisco password 0 BR
  !
  !
  license udi pid CISCO2901/K9 sn FTX1524YO05
  licence start-up module c2900 technology-package securityk9
  !
  !
  !
  crypto ISAKMP policy 10
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  !
  cisco key crypto isakmp 10.0.0.2 address
  address of cisco crypto isakmp 200.200.200.2 keys
  !
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac TS
  !
  CMAP 10 ipsec-isakmp crypto card
  defined peer 10.0.0.2
  defined by peer 200.200.200.2
  game of transformation-TS
  match the vpn address
  !
  !
  !
  !
  !
  !
  pvst spanning-tree mode
  !
  !
  !
  !
  !
  !
  interface GigabitEthernet0/0
  IP 100.100.100.2 255.255.255.252
  automatic duplex
  automatic speed
  card crypto WCPA
  !
  interface GigabitEthernet0/1
  IP 172.21.0.254 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  the IP 10.0.0.1 255.255.255.252
  encapsulation ppp
  Chap PPP authentication protocol
  2000000 clock frequency
  card crypto WCPA
  !
  interface Serial0/0/1
  no ip address
  2000000 clock frequency
  Shutdown
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  router ospf 1
  Log-adjacency-changes
  Network 10.0.0.0 0.0.0.3 area 0
  network 172.21.0.0 0.0.0.255 area 0
  !
  router RIP
  version 2
  network 100.0.0.0
  network 172.21.0.0
  No Auto-resume
  !
  IP classless
  !
  IP flow-export version 9
  !
  !
  list of IP - vpn access scope
  IP 172.21.0.0 allow 0.0.0.255 172.22.0.0 0.0.0.255
  !
  !
  !
  !
  !
  Line con 0
  !
  line to 0
  !
  line vty 0 4
  opening of session
  !
  !
  !
  end

  Configuration of BR:

  !
  version 15.1
  no service the timestamps don't log datetime msec
  no service timestamps debug datetime msec
  no password encryption service
  !
  hostname BR
  !
  !
  !
  !
  !
  !
  !
  !
  no ip cef
  No ipv6 cef
  !
  !
  !
  Cisco spends 0 username AR
  !
  !
  license udi pid CISCO2901/K9 sn FTX1524L63A
  licence start-up module c2900 technology-package securityk9
  !
  !
  !
  crypto ISAKMP policy 10
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  !
  cisco key crypto isakmp 10.0.0.1 address
  address of cisco crypto isakmp 100.100.100.2 keys
  !
  !
  !
  Crypto ipsec transform-set esp-3des esp-sha-hmac TS
  !
  CMAP 10 ipsec-isakmp crypto card
  defined peer 10.0.0.1
  defined by peer 100.100.100.2
  game of transformation-TS
  match the vpn address
  !
  !
  !
  !
  !
  !
  pvst spanning-tree mode
  !
  !
  !
  !
  !
  !
  interface GigabitEthernet0/0
  IP 200.200.200.2 255.255.255.252
  automatic duplex
  automatic speed
  card crypto WCPA
  !
  interface GigabitEthernet0/1
  IP 172.22.0.254 255.255.255.0
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  the IP 10.0.0.2 255.255.255.252
  encapsulation ppp
  Chap PPP authentication protocol
  card crypto WCPA
  !
  interface Serial0/0/1
  no ip address
  2000000 clock frequency
  Shutdown
  !
  interface Vlan1
  no ip address
  Shutdown
  !
  router ospf 1
  Log-adjacency-changes
  Network 10.0.0.0 0.0.0.3 area 0
  network 172.22.0.0 0.0.0.255 area 0
  !
  router RIP
  version 2
  network 172.22.0.0
  network 200.200.200.0
  No Auto-resume
  !
  IP classless
  !
  IP flow-export version 9
  !
  !
  list of IP - vpn access scope
  IP 172.22.0.0 allow 0.0.0.255 172.21.0.0 0.0.0.255
  !
  !
  !
  !
  !
  Line con 0
  !
  line to 0
  !
  line vty 0 4
  opening of session
  !
  !
  !
  end

  Thank you very much!

  Although you might go this route, I wouldn't.

  I would use VTI (GRE tunnels that run over IPSec) interfaces.  One on the series circuit and the other on the circuit of the ISP.

  You can then either use GRE KeepAlive to detect which tunnels are in place and use static routes or dynamic routing as EIGRP Protocol (put a higher value of the 'bandwidth' with the 'bandwidth' command on the favorite tunnel).

• 1811 and VPN Client

  I'm trying to connect to my router Cisco VPN Client 4.8 of Pentecost Cisco1811 Pentecost rsa - sig (certificate). On the Cisco VPN Client I resive username request I spend. When I insert them on the 1811 I resive this message on the console

  % CRYPTO-6-VPN_TUNNEL_STATUS: Group: does not exist

  My ios config is:

  AAA new-model

  !

  !

  local VPNUSER AAA authentication login

  local AAA VPNUSER authorization network

  !

  AAA - the id of the joint session

  !

  resources policy

  !

  !

  !

  IP cef

  No dhcp use connected vrf ip

  DHCP excluded-address IP 192.168.10.1

  !

  SDM-IP dhcp pool pool

  import all

  network 192.168.10.0 255.255.255.0

  default router 192.168.10.1

  Rental 2 0

  !

  !

  no ip domain search

  "yourdomain.com" of the IP domain name

  !

  ! Crypto pki token by default user pins *.

  Crypto pki token removal timeout 30 default

  !

  Crypto pki trustpoint TP-self-signed-2095781077

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 2095781077

  revocation checking no

  rsakeypair TP-self-signed-2095781077

  !

  Crypto pki trustpoint CA_Server

  Terminal registration

  Serial number no

  full domain name no

  IP address no

  password

  name of the object O = 5100, OU = customs, CN = ROUTER1

  revocation checking no

  rsakeypair SDM-RSAKey-1180596453000

  !

  !

  TP-self-signed-2095781077 crypto pki certificate chain

  string CA_Server crypto pki certificates

  !

  crypto ISAKMP policy 10

  BA 3des

  Group 2

  ISAKMP crypto identity dn

  !

  ISAKMP crypto client configuration group guest_group

  DNS 10.1.1.3

  pool vpnpool

  !

  !

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  !

  Crypto-map dynamic dynmap 10

  game of transformation-ESP-3DES-MD5

  !

  !

  list of authentication of card crypto client vpn_map VPNUSER

  card crypto vpn_map VPNUSER isakmp authorization list

  client configuration address card crypto vpn_map throw

  client configuration address card crypto vpn_map answer

  vpn_map 10 card crypto ipsec-isakmp dynamic dynmap

  !

  What can I do

  What is the OU on the certificate you have for the customer?

  What is guest_group or something else?

  Thank you

  Gilbert

• VPN works, but cannot access the LAN...

  I have cisco vpn client connection to a 1721 at the office. the client connects and I can access the office LAN but but not the local network. I have the box checked in client vpn to allow access to the local network. Help, please!

  Thank you!

  Matt

  Here is the config:

  Current configuration: 3901 bytes

  !

  version 12.2

  horodateurs service debug datetime msec

  Log service timestamps datetime msec

  encryption password service

  !

  Cerberus hostname

  !

  start the system flash c1700-k9o3sy7 - mz.122 - 11.T10.bin

  AAA new-model

  !

  !

  RADIUS AAA server group SERVERS RADIUS

  auth-port 1645 192.168.69.1 Server acct-port 1646

  !

  AAA authentication login LOGIN group SERVERS RADIUS local

  local NETGROUPAUTH AAA authorization network

  AAA - the id of the joint session

  !

  username mattheff password xxx

  username mikeheff password xxx

  clock timezone CST - 6

  clock to summer time recurring CDT 2 Sun Mar 2:00 1 Sun Nov 02:00

  IP subnet zero

  !

  !

  IP domain name heffnet.net

  name of the IP-server 68.94.156.1

  name of the IP-server 68.94.157.1

  DHCP excluded-address IP 192.168.69.1 192.168.69.99

  DHCP excluded-address IP 192.168.69.111 192.168.69.254

  !

  dhcp HEFFNET_LAN_POOL_1 IP pool

  network 192.168.69.0 255.255.255.0

  router by default - 192.168.69.254

  Server DNS 68.x.x.1 68.94.157.1

  !

  audit of IP notify Journal

  Max-events of po verification IP 100

  VPDN enable

  !

  VPDN-group pppoe

  demand dial

  Protocol pppoe

  !

  !

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group VPNGROUP crypto isakmp client

  8mathef8 key

  68.x.x.1 DNS 68.94.157.1

  heffnet.net field

  pool VPN_CLIENT_POOL

  ACL 102

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac VPNSET1

  !

  crypto dynamic-map 10 DYNMAP

  game of transformation-VPNSET1

  !

  !

  list of authentication of card crypto VPNCLIENTMAP customer LOGIN

  list of crypto isakmp NETGROUPAUTH VPNCLIENTMAP card authorization

  crypto card for the VPNCLIENTMAP client configuration address respond

  card crypto VPNCLIENTMAP 10-isakmp dynamic ipsec DYNMAP

  !

  !

  !

  !

  interface Loopback0

  IP address 1.1.x.x.255.255.252

  !

  ATM0 interface

  Heffnet WAN/SBC DSL Interface Description

  no ip address

  No atm ilmi-keepalive

  PVC 0/35

  PPPoE-client dial-pool-number 69

  !

  DSL-automatic operation mode

  no fair queue

  !

  interface FastEthernet0

  Heffnet LAN Interface Description

  IP 192.168.69.254 255.255.255.0

  IP nat inside

  IP tcp adjust-mss 1452

  route VPN_ROUTE_MAP card intellectual property policy

  automatic speed

  !

  interface Dialer69

  MTU 1492

  the negotiated IP address

  NAT outside IP

  encapsulation ppp

  Dialer pool 69

  PPP chap hostname cerberus

  PPP chap password xxx

  PPP pap sent-username [email protected] / * / password xxx

  card crypto VPNCLIENTMAP

  !

  local IP VPN_CLIENT_POOL 192.168.70.200 pool 192.168.70.253

  IP nat inside source list interface INTERNALLY Dialer69 overload

  !

  IP classless

  IP route 0.0.0.0 0.0.0.0 Dialer69

  no ip address of the http server

  !

  !

  INTERNAL extended IP access list

  deny ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255

  IP 192.168.69.0 allow 0.0.0.255 any

  !

  record 192.168.69.1

  access-list 101 permit ip 192.168.69.0 0.0.0.255 192.168.70.0 0.0.0.255

  access-list 102 permit ip 192.168.69.0 0.0.0.255 any

  !

  VPN_ROUTE_MAP allowed 10 route map

  corresponds to the IP 101

  set ip next-hop 1.1.1.2

  !

  alias exec s show ip interface brief

  alias exec sr show running-config

  !

  Line con 0

  privilege level 15

  Synchronous recording

  line to 0

  privilege level 15

  Synchronous recording

  line vty 0 4

  privilege level 15

  Synchronous recording

  line vty 5 15

  privilege level 15

  Synchronous recording

  !

  Scheduler allocate 4000 1000

  end

  Hi Matt,

  The config looks good. Please make sure that you get a route to 192.168.69.0 255.255.255.0 network only after the connection to the VPN client. Please also correspond to the exit "route print" before and after the connection. One last thing, I hope that the local network is not 192.168.69.0.

  HTH,

  Please rate if this helps,

  Kind regards

  Kamal

• IOS VPN will not respond to connections Cisco VPN Client.

  Hi all

  I'll put my routers fire here.

  I have two 2921 SRI both with licenses of security concerning leased lines separated. I configured one to accept our workers to remote Client VPN Cisco VPN connections.

  I have followed the set up process I used on another site with a router 1841/s and the same customers and I have also checked against the config given in the last guide of IOS15 EasyVPN.

  With debugs all assets, all I see is

  038062: 14:03:04.519 Dec 8: ISAKMP (0): received x.y.z.z dport-60225 Global (N) SA NEW 500 sport package
  038063: 14:03:04.519 Dec 8: ISAKMP: created a struct peer x.y.z.z, peer port 60225
  038064: 14:03:04.519 Dec 8: ISAKMP: new position created post = 0x3972090C peer_handle = 0x8001D881
  038065: 14:03:04.523 Dec 8: ISAKMP: lock struct 0x3972090C, refcount 1 to peer crypto_isakmp_process_block
  038066: 14:03:04.523 Dec 8: ISAKMP: (0): client setting Configuration parameters 3E156D70
  038067: 14:03:10.027 Dec 8: ISAKMP (0): packet received x.y.z.z dport 500 sport 60225 Global (R) MM_NO_STATE

  Here is the abbreviated config.

  System image file is "flash0:c2900 - universalk9-mz.» Spa. 154 - 1.T1.bin.

  AAA new-model
  !
  !
  AAA authentication login default local
  local VPNAUTH AAA authentication login
  AAA authorization exec default local
  local authorization AAA VPN network
  !
  !
  !
  !
  !
  AAA - the id of the joint session

  crypto ISAKMP policy 10
  BA aes
  preshared authentication
  Group 14

  ISAKMP crypto group configuration of VPN client
  key ****-****-****-****
  DNS 192.168.177.207 192.168.177.3
  xxx.local field
  pool VPNADDRESSES
  ACL REVERSEROUTE

  Crypto ipsec transform-set aes - esp esp-sha-hmac HASH
  tunnel mode

  Profile of crypto ipsec IPSECPROFILE
  the HASH transform-set value

  dynamic-map crypto VPN 1
  the HASH transform-set value
  market arriere-route
  !
  !
  list of authentication of card crypto client VPN VPNAUTH
  card crypto VPN VPN isakmp authorization list
  crypto map VPN client configuration address respond
  card crypto 65535-isakmp dynamic VPN ipsec VPN
  !
  !
  local IP VPNADDRESSES 172.16.198.16 pool 172.16.198.31

  REVERSEROUTE extended IP access list
  IP 192.168.0.0 allow 0.0.255.255 everything
  Licensing ip 10.0.0.0 0.0.0.255 any

  scope of IP-FIREWALL access list
  2 allow any host a.b.c.d eq non500-isakmp udp
  3 allow any host a.b.c.d eq isakmp udp
  4 ahp permits any host a.b.c.d
  5 esp of the permit any host a.b.c.d

  If anyone can see anything wrong, I would be very happy and it would save the destruction of a seemingly innocent router.

  Thank you

  Paul

  > I would be so happy and it would save the destruction of a seemingly innocent router.

  No, which won't work! But instead of destroying the router, I can do it for you. Just send it to me... ;-)

  OK, now more serious...

  1. The default Cisco IPSec client uses only DH group 2, while you set up the 14. Try to use Group 2 in your isakmp policy.
  2. You have your virtual model in place? She is not in the config.

• Disable XAuth for remote access VPN

  Hi guys,.

  I would like to know if I can jump XAuth for access to remote VPN on a router.

  Here's my config, all working beautifully, always on connection I do not see any window username & password after having clicked on the Vpn profile.

  local VPNUSERSAUTH AAA authentication login
  local AAA VPNUSERS authorization network
  ra-user privilege 0 1cannotTELu secret user name
   
  crypto ISAKMP policy 7
  BA aes
  sha hash
  preshared authentication
  Group 2
   
  Configuration group customer crypto isakmp VPNUSERS
  theKEYallneedt0 key
  VPN-pool
  ACL ACL-SPLIT-VPN
   
  Crypto ipsec transform-set esp-3des esp-sha-hmac 3DES-SHA
  crypto dynamic-map VPNDYNMAP 1
  game of transformation-ESP-AES128-SHA
  market arriere-route
   
  list of authentication of card crypto map-OUTSIDE client VPNUSERSAUTH
  list of crypto card authorization card-OUTSIDE isakmp VPNUSERS
  client configuration address card crypto map-OUTSIDE meet
  card crypto 6500 map-OUTSIDE-isakmp ipsec dynamic VPNDYNMAP
   
  local IP VPN-POOL 10.1.24.1 pool 10.1.24.25
  IP extended ACL-SPLIT-VPN access list
  ip licensing 192.168.11.0 0.0.0.255 10.1.24.0 0.0.0.255
   
  Thank you very much!

  Hi Florin,

  In the case of remote VPN access, the user must be authenticated by name of user and password or certificates.
  You can deploy authentication certificate based as follows: -.
  http://www.Cisco.com/c/en/us/support/docs/security-VPN/IPSec-negotiation-IKE-protocols/22520-unityclient-iOS.html#router-config

  This will use the certificate for authentication of users and only requires name of user and password.

  Kind regards
  Dinesh Moudgil

  PS Please rate helpful messages.

• Problems with VPN on a PAT router

  Hello

  I have problems to make my VPN to work. I read through various examples of configuration, but don't always have it work properly.

  Scenario: connection with the Cisco VPN Client to my router from outside.

  Router works like NAT/PAT overload. Internet: Internal FA0/1 network: FA0/0

  Problems: connection is working without problem, but I can't access anything in the network behind the router. Some hosts ping sometimes works, sometimes doesn't.

  Does anyone have an idea of what could be the problem and what wrong with my setup?

  Thanks in advance!

  Here is my configuration:

  Current configuration: 5817 bytes
  !
  ! Last modification of the configuration at 14:41:13 CEST Saturday, July 3, 2010
  !
  version 12.3
  horodateurs service debug uptime
  Log service timestamps uptime
  no password encryption service
  !
  router01 hostname
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5 - CENSORED-

  activate the password - CENSORED-

  !
  clock timezone THIS 1
  clock to summer time it IS recurring
  AAA new-model
  !
  !
  local USERLIST of AAA authentication login.
  local GROUP AAA authorization network
  AAA - the id of the joint session
  IP subnet zero
  IP cef
  !
  !
  !
  Max-events of po verification IP 100
  IPv6 unicast routing
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  username password 0 - CENSORED - TEST

  !
  !
  !
  !
  crypto ISAKMP policy 10
  BA aes 256
  preshared authentication
  Group 2
  the local address ADDRESSPOOL pool-crypto isakmp client configuration
  ISAKMP xauth timeout 60 crypto
           
  !
  Configuration group customer isakmp crypto GROUP
  -UNCENSORED - key

  pool ADDRESSPOOL
  ACL 150
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac SET
  !
  crypto dynamic-map 10 DYNMAP
  Set transform-set
  market arriere-route
  !
  !
  list of authentication of card crypto client DYNMAP USERLIST
  list of crypto isakmp DYNMAP card authorization GROUP
  crypto card for the DYNMAP client configuration address respond
  card crypto DYNMAP 10-isakmp dynamic ipsec DYNMAP
  !
  !
  !
  !
  !
  !
  interface FastEthernet0/0
  IP 172.16.0.250 255.255.252.0
  IP nat inside
  automatic speed
  full-duplex
  !
  interface FastEthernet0/0.93
  encapsulation dot1Q 93
  IP 172.20.2.5 255.255.255.252
  !
  interface Serial0/0
  no ip address
  Shutdown
  no fair queue
  !
  interface FastEthernet0/1
  DHCP IP address
  NAT outside IP
  automatic duplex
  automatic speed
  No cdp enable
  card crypto DYNMAP
  !
  interface Serial0/1
  no ip address
  Shutdown
  No cdp enable
  !
  !
  local IP ADDRESSPOOL 172.17.0.100 pool 172.17.0.150
  IP nat inside source list 1 interface FastEthernet0/1 overload
  IP nat inside source static tcp 172.16.1.51 80 interface FastEthernet0/1 81
  IP nat inside source static tcp 172.16.2.4 2909 interface FastEthernet0/1 2909
  IP nat inside source static tcp 172.16.2.1 3389 3389 FastEthernet0/1 interface
  IP nat inside source static tcp 172.16.1.51 50000 interface FastEthernet0/1 50000
  IP nat inside source static tcp 172.16.1.51 52000 interface FastEthernet0/1 52000
  IP nat inside source static tcp 172.16.1.51 52001 interface FastEthernet0/1 52001
  IP nat inside source static tcp 172.16.1.51 52002 interface FastEthernet0/1 52002
  IP nat inside source static tcp 172.16.1.51 52003 interface FastEthernet0/1 52003
  IP nat inside source static tcp 172.16.1.51 52004 interface FastEthernet0/1 52004
  IP nat inside source static tcp 172.16.1.51 52005 interface FastEthernet0/1 52005
  IP nat inside source static tcp 172.16.1.51 52006 interface FastEthernet0/1 52006
  IP nat inside source static tcp 172.16.1.51 52007 interface FastEthernet0/1 52007
  IP nat inside source static tcp 172.16.1.51 52008 interface FastEthernet0/1 52008
  IP nat inside source static tcp 172.16.1.51 52009 interface FastEthernet0/1 52009
  IP nat inside source static tcp 172.16.1.51 52010 interface FastEthernet0/1 52010
  IP nat inside source static tcp 172.16.1.51 52011 interface FastEthernet0/1 52011
  IP nat inside source static tcp 172.16.1.51 52012 interface FastEthernet0/1 52012
  IP nat inside source static tcp 172.16.1.51 52013 interface FastEthernet0/1 52013
  IP nat inside source static tcp 172.16.1.51 52014 interface FastEthernet0/1 52014
  IP nat inside source static tcp 172.16.1.51 52015 interface FastEthernet0/1 52015
  IP nat inside source static tcp 172.16.1.51 52016 interface FastEthernet0/1 52016
  IP nat inside source static tcp 172.16.1.51 52017 interface FastEthernet0/1 52017
  IP nat inside source static tcp 172.16.1.51 52018 interface FastEthernet0/1 52018
  IP nat inside source static tcp 172.16.1.51 52019 interface FastEthernet0/1 52019
  IP nat inside source static tcp 172.16.1.51 52020 interface FastEthernet0/1 52020
  IP nat inside source static tcp 172.16.1.11 80 interface FastEthernet0/1 80
  IP nat inside source static tcp 172.16.1.11 443 interface FastEthernet0/1 443
  IP nat inside source static tcp 172.16.1.1 25 interface FastEthernet0/1 25
  no ip address of the http server
  no ip http secure server
  IP classless
  !
  enable IP pim Bennett
  !
  access-list 1 permit 172.16.0.0 0.0.3.255
  access-list 101 permit tcp any any eq 50000
  access-list 101 permit tcp everything any 52000 52020 Beach
  access-list 101 permit tcp any any eq www
  access-list 101 permit tcp any any eq 443
  access-list 101 permit tcp any any eq smtp
  access-list 101 permit tcp any any eq 3389
  access-list 101 permit tcp any any eq 2909
  access-list 150 permit ip 172.16.0.0 0.0.3.255 172.17.0.0 0.0.0.255
  access-list 151 allow ip 172.16.0.0 0.0.3.255 all
  !
  SHEEP allowed 10 route map
  corresponds to the IP 151

  !
  public RO SNMP-server community
  !
  !
  !
  !
  !
  Line con 0
  exec-timeout 0 0
  line to 0
  line vty 0 4
  password - CENSORED-

  !
  NTP-period clock 17180405
  source NTP FastEthernet0/1
  NTP 162.23.41.34 Server
  NTP 162.23.41.56 Server
  NTP 162.23.41.55 Server
  !
  end

  Jenny,

  The NAT config is a little weird, you list 1.

  List 1 is everything inside. (so all traffic inside subnet must be natted).

  You must create an extended access list and create the entry

  IP access-l ext 195

  10 deny ip LOCAL_ADDRESS LOCAL_MASK VPN_POOL VPN_MASK

  1000 ip LOCAL_ADDRESS LOCAL_MASK perm all

  and apply that list to NAT overload.

  This gives a try and let me know.

  Edit: Ouch, 12.3 Mainline... Ollllllllllllld

• IOS Easy VPN Server / Radius attributes

  Hello

  I made an easy VPN server installation with a running 12.2 2621XM router (15) output T5. VPN Clients/users are authenticated against Cisco ACS 3.2 by RADIUS.

  It works fine, but there is a problem that I can't solve. Each user must have the same VPN assigned IP address whenever it is authenticated.

  The ACS sends the right radius attribute (box-IP-Address) back to square of IOS, but this address is not assigned to the client. The customer always gets the next available IP address in the local set on the router.

  How can I solve this problem?

  You will find the relevant parts of the configuration and a RADIUS "deb" below.

  Kind regards

  Christian

  AAA - password password:

  AAA authentication calls username username:

  RADIUS AAA authentication login local users group

  RADIUS AAA authorization network default local group

  crypto ISAKMP policy 1

  Group 2

  !

  crypto ISAKMP policy 3

  md5 hash

  preshared authentication

  Group 2

  ISAKMP crypto identity hostname

  !

  ISAKMP crypto client configuration group kh_vpn

  mypreshared key

  pool mypool

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac shades

  !

  mode crypto dynamic-map 1

  shades of transform-set Set

  !

  users list card crypto mode client authentication

  card crypto isakmp authorization list by default mode

  card crypto client mode configuration address respond

  dynamic mode 1-isakmp ipsec crypto map mode

  !

  interface FastEthernet0/1

  IP 192.168.100.41 255.255.255.248

  crypto map mode

  !

  IP local pool mypool 172.16.0.2 172.16.0.10!

  Server RADIUS attribute 8 include-in-access-req

  RADIUS-server host 192.168.100.13 key auth-port 1645 acct-port 1646 XXXXXXXXXXXXXXXX

  RADIUS server authorization allowed missing Type of service

  deb RADIUS #.

  00:03:28: RADIUS: Pick NAS IP for you = tableid 0x83547CDC = 0 cfg_addr = 0.0.0.0 best_a

  DDR = 192.168.100.26

  00:03:28: RADIUS: ustruct sharecount = 2

  00:03:28: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

  00:03:28: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

  4, len 73

  00:03:28: RADIUS: authenticator 89 EA 97 56 12 B1 C5 C2 - C0 66 59 47 F7 88 96

  68

  00:03:28: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

  00:03:28: RADIUS: NAS-Port-Type [61] Async 6 [0]

  00:03:28: RADIUS: username [1] 10 "vpnuser1".

  00:03:28: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

  00:03:28: RADIUS: User-Password [2] 18 *.

  00:03:28: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/4 l

  in 108

  00:03:28: RADIUS: authenticator C1 7 29 56 50 89 35 B7 - 92 7 b 1 has 32 87 15 6

  A4

  00:03:28: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:28: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

  00:03:28: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

  00:03:28: RADIUS: Tunnel-Password [69] 21 *.

  00:03:28: RAY: box-IP-Netmask [9] 6 255.255.255.0

  00:03:28: RADIUS: Framed-IP-Address [8] 6 172.16.0.5

  00:03:28: RADIUS: [25] the class 37

  00:03:28: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

  000010]

  00:03:28: RADIUS: 2F 33 63 30 61 38 36 34 31 61 76 70 75 73 [3/c0a8641a 6F 2F

  /vpnus]

  00:03:28: RADIUS: 65 72 31 [1]

  00:03:28: RADIUS: saved the authorization for user 83547CDC to 83548430 data

  00:03:29: RADIUS: authentication for data of the author

  00:03:29: RADIUS: Pick NAS IP for you = tableid 0x82A279FC = 0 cfg_addr = 0.0.0.0 best_a

  DDR = 192.168.100.26

  00:03:29: RADIUS: ustruct sharecount = 3

  00:03:29: RADIUS: success of radius_port_info() = 0 radius_nas_port = 1

  00:03:29: RADIUS (00000000): send request to access the id 192.168.100.13:1645 21645.

  5, len 77

  00:03:29: RADIUS: authenticator 13 B2 A6 CE BF B5 DA 7th - 7B F0 F6 0b A2 35 60

  E3

  00:03:29: RADIUS: NAS-IP-Address [4] 6 192.168.100.26

  00:03:29: RADIUS: NAS-Port-Type [61] Async 6 [0]

  00:03:29: RADIUS: username [1] 8 'kh_vpn '.

  00:03:29: RADIUS: Calling-Station-Id [31] 13 "10.1.14.150".

  00:03:29: RADIUS: User-Password [2] 18 *.

  00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:29: RADIUS: receipt of 192.168.100.13:1645, Access-Accept, id 21645/5 l

  in 94

  00:03:29: RADIUS: authenticator C4 F5 2F C3 EE 56 DA C9 - 05 D6 F5 5 d EF 74 23

  AF

  00:03:29: RADIUS: Type of Service [6] 6 leavers [5]

  00:03:29: RADIUS: connection-ip-addr-host [14] 6 255.255.255.255

  00:03:29: RADIUS: Tunnel-Type [64] 6 01:ESP [9]

  00:03:29: RADIUS: Tunnel-Password [69] 21 *.

  00:03:29: RADIUS: [25] class 35

  00:03:29: RADIUS: 43 49 53 43 4F 41 43 53 3 A 30 30 30 30 30 31 30 [CISCOACS:0

  000010]

  00:03:29: RADIUS: 2F 34 63 30 61 38 36 34 31 61 2F 6 b 5F 68 76 70 [4/c0a8641a

  [/ kh_vp]

  00:03:29: RADIUS: 6 [n]

  00:03:29: RADIUS: saved the authorization for user 82A279FC to 82A27D3C data

  Assignment of an IP address via a server Raidus is currently not supported, even if your Radius Server is through an IP address, the router will ignore it and just assign an IP address from the pool locla. In fact, the pool room is the only way to assign IP addresses currently.

  On the only way to do what you want right now is to create different groups VPN, each reference to a local IP pool with an address in it. Then ask each user connect to the appropriate by their VPN client group.

  Yes, messy, but just try to provide a solution for you.

• Cisco ipsec Vpn connects but cannot communicate with lan

  I have a version of cisco 1921 15.2 (4) M3 I install vpn ipsec and may have customers to connect but cannot ping anything inside.  A glimpse of what could be wrong with my config would be greatly appreciated.  I posted the configuration as well as running a few outings of ipsec.  I also tried with multiple operating systems using cisco vpn client and shrewsoft.  I am able to connect to the other VPN ipsec running 1921 both of these computers by using a client.

  Thanks for any assistance

  SH run

  !
  AAA new-model
  !
  !
  AAA authentication login radius_auth local radius group
  connection of AAA VPN_AUTHEN group local RADIUS authentication
  AAA authorization network_vpn_author LAN
  !
  !
  !
  !
  !
  AAA - the id of the joint session
  clock timezone PST - 8 0
  clock to summer time recurring PST
  !
  no ip source route
  decline of the IP options
  IP cef
  !
  !
  !
  !
  !
  !
  no ip bootp Server
  no ip domain search
  domain IP XXX.local
  inspect the high IP 3000 max-incomplete
  inspect the low IP 2800 max-incomplete
  IP inspect a low minute 2800
  IP inspect a high minute 3000
  inspect the IP icmp SDM_LOW name
  inspect the IP name SDM_LOW esmtp
  inspect the tcp IP SDM_LOW name
  inspect the IP udp SDM_LOW name
  IP inspect name SDM_LOW ssh
  No ipv6 cef
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  Crypto pki trustpoint TP-self-signed-2909270577
  enrollment selfsigned
  name of the object cn = IOS - Self - signed - certificate - 2909270577
  revocation checking no
  rsakeypair TP-self-signed-2909270577
  !
  !
  TP-self-signed-2909270577 crypto pki certificate chain
  certificate self-signed 01
  license udi pid CISCO1921/K9 sn FTX1715818R
  !
  !
  Archives
  The config log
  Enable logging
  size of logging 1000
  notify the contenttype in clear syslog
  the ADMIN_HOSTS object-group network
  71.X.X.X 71.X.X.X range
  !
  name of user name1 secret privilege 15 4 XXXXXXX

  !
  redundancy
  !
  !
  !
  !
  !
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  property intellectual ssh event logging
  property intellectual ssh version 2
  !
  !
  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  !
  ISAKMP crypto client configuration group roaming_vpn
  key XXXXX
  DNS 192.168.10.10 10.1.1.1
  XXX.local field
  pool VPN_POOL_1
  ACL client_vpn_traffic
  netmask 255.255.255.0
  !
  !
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  tunnel mode
  !
  !
  !
  crypto dynamic-map VPN_DYNMAP_1 1
  Set the security association idle time 1800
  game of transformation-ESP-3DES-SHA
  market arriere-route
  !
  !
  list of authentication of card crypto SDM_CMAP_1 client VPN_AUTHEN
  map SDM_CMAP_1 isakmp authorization list network_vpn_author crypto
  client configuration address map SDM_CMAP_1 crypto answer
  map SDM_CMAP_1 65535-isakmp dynamic VPN_DYNMAP_1 ipsec crypto
  !
  !
  !
  !
  !
  the Embedded-Service-Engine0/0 interface
  no ip address
  Shutdown
  !
  interface GigabitEthernet0/0
  IP 76.W.E.R 255.255.255.248
  IP access-group ATT_Outside_In in
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  NAT outside IP
  inspect the SDM_LOW over IP
  IP virtual-reassembly in
  load-interval 30
  automatic duplex
  automatic speed
  No cdp enable
  No mop enabled
  map SDM_CMAP_1 crypto
  !
  interface GigabitEthernet0/1
  no ip address
  load-interval 30
  automatic duplex
  automatic speed
  !
  interface GigabitEthernet0/1.10
  encapsulation dot1Q 1 native
  IP 192.168.10.1 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  property intellectual accounting-access violations
  IP nat inside
  IP virtual-reassembly in
  !
  interface GigabitEthernet0/1.100
  encapsulation dot1Q 100
  10.1.1.254 IP address 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP nat inside
  IP virtual-reassembly in
  !
  interface GigabitEthernet0/1,200
  encapsulation dot1Q 200
  IP 10.1.2.254 255.255.255.0
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  IP nat inside
  IP virtual-reassembly in
  IP tcp adjust-mss 1452
  !
  local IP VPN_POOL_1 192.168.168.193 pool 192.168.168.254
  IP forward-Protocol ND
  !
  IP http server
  IP http authentication aaa-authentication of connection ADMIN_AUTHEN
  IP http secure server
  IP http timeout policy slowed down 60 life 86400 request 10000
  !
  IP nat inside source map route ATT_NAT_LIST interface GigabitEthernet0/0 overload
  IP nat inside source static tcp 192.168.10.10 25 expandable 25 76.W.E.R
  IP nat inside source static tcp 192.168.10.10 80 76.W.E.R 80 extensible
  IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 443 443
  IP nat inside source static tcp 192.168.10.10 76.W.E.R expandable 987 987
  IP route 0.0.0.0 0.0.0.0 76.W.E.F
  !
  ATT_Outside_In extended IP access list
  permit tcp object-group ADMIN_HOSTS any eq 22
  allow any host 76.W.E.R eq www tcp
  allow any host 76.W.E.R eq 443 tcp
  allow 987 tcp any host 76.W.E.R eq
  allow any host 76.W.E.R eq tcp smtp
  permit any any icmp echo response
  allow icmp a whole
  allow udp any any eq isakmp
  allow an esp
  allow a whole ahp
  permit any any eq non500-isakmp udp
  deny ip 10.0.0.0 0.255.255.255 everything
  deny ip 172.16.0.0 0.15.255.255 all
  deny ip 192.168.0.0 0.0.255.255 everything
  deny ip 127.0.0.0 0.255.255.255 everything
  refuse the ip 255.255.255.255 host everything
  refuse the host ip 0.0.0.0 everything
  NAT_LIST extended IP access list
  IP 10.1.0.0 allow 0.0.255.255 everything
  permit ip 192.168.10.0 0.0.0.255 any
  deny ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
  refuse the 10.1.1.0 ip 0.0.0.255 192.168.168.192 0.0.0.63
  deny ip 10.1.2.0 0.0.0.255 192.168.168.192 0.0.0.63
  client_vpn_traffic extended IP access list
  permit ip 192.168.10.0 0.0.0.255 192.168.168.192 0.0.0.63
  ip licensing 10.1.1.0 0.0.0.255 192.168.168.192 0.0.0.63
  IP 10.1.2.0 allow 0.0.0.255 10.1.1.0 0.0.0.255
  !
  radius of the IP source-interface GigabitEthernet0/1.10
  Logging trap errors
  logging source hostname id
  logging source-interface GigabitEthernet0/1.10
  !
  ATT_NAT_LIST allowed 20 route map
  corresponds to the IP NAT_LIST
  is the interface GigabitEthernet0/0
  !
  !
  SNMP-server community [email protected] / * /! s RO
  Server enable SNMP traps snmp authentication linkdown, linkup warmstart cold start
  Server enable SNMP traps vrrp
  Server SNMP enable transceiver traps all the
  Server enable SNMP traps ds1
  Enable SNMP-Server intercepts the message-send-call failed remote server failure
  Enable SNMP-Server intercepts ATS
  Server enable SNMP traps eigrp
  Server enable SNMP traps ospf-change of State
  Enable SNMP-Server intercepts ospf errors
  SNMP Server enable ospf retransmit traps
  Server enable SNMP traps ospf lsa
  Server enable SNMP traps ospf nssa-trans-changes state cisco-change specific
  SNMP server activate interface specific cisco-ospf traps shamlink state change
  SNMP Server enable neighbor traps cisco-specific ospf to the State shamlink change
  Enable SNMP-Server intercepts specific to cisco ospf errors
  SNMP server activate specific cisco ospf retransmit traps
  Server enable SNMP traps ospf cisco specific lsa
  SNMP server activate license traps
  Server enable SNMP traps envmon
  traps to enable SNMP-Server ethernet cfm cc mep-top low-mep Dispatcher loop config
  Enable SNMP-Server intercepts ethernet cfm overlap missing mep mep-unknown service-up
  Server enable SNMP traps auth framework sec-violation
  Server enable SNMP traps c3g
  entity-sensor threshold traps SNMP-server enable
  Server enable SNMP traps adslline
  Server enable SNMP traps vdsl2line
  Server enable SNMP traps icsudsu
  Server enable SNMP traps ISDN call-information
  Server enable SNMP traps ISDN layer2
  Server enable SNMP traps ISDN chan-not-available
  Server enable SNMP traps ISDN ietf
  Server enable SNMP traps ds0-busyout
  Server enable SNMP traps ds1-loopback
  SNMP-Server enable traps energywise
  Server enable SNMP traps vstack
  SNMP traps enable mac-notification server
  Server enable SNMP traps bgp cbgp2
  Enable SNMP-Server intercepts isis
  Server enable SNMP traps ospfv3-change of State
  Enable SNMP-Server intercepts ospfv3 errors
  Server enable SNMP traps aaa_server
  Server enable SNMP traps atm subif
  Server enable SNMP traps cef resources-failure-change of State peer peer-fib-state-change inconsistency
  Server enable SNMP traps memory bufferpeak
  Server enable SNMP traps cnpd
  Server enable SNMP traps config-copy
  config SNMP-server enable traps
  Server enable SNMP traps config-ctid
  entity of traps activate SNMP Server
  Server enable SNMP traps fru-ctrl
  SNMP traps-policy resources enable server
  Server SNMP enable traps-Manager of event
  Server enable SNMP traps frames multi-links bundle-incompatibility
  SNMP traps-frame relay enable server
  Server enable SNMP traps subif frame relay
  Server enable SNMP traps hsrp
  Server enable SNMP traps ipmulticast
  Server enable SNMP traps msdp
  Server enable SNMP traps mvpn
  Server enable SNMP traps PNDH nhs
  Server enable SNMP traps PNDH nhc
  Server enable SNMP traps PNDH PSN
  Server enable SNMP traps PNDH exceeded quota
  Server enable SNMP traps pim neighbor-rp-mapping-change invalid-pim-message of change
  Server enable SNMP traps pppoe
  Enable SNMP-server holds the CPU threshold
  SNMP Server enable rsvp traps
  Server enable SNMP traps syslog
  Server enable SNMP traps l2tun session
  Server enable SNMP traps l2tun pseudowire status
  Server enable SNMP traps vtp
  Enable SNMP-Server intercepts waas
  Server enable SNMP traps ipsla
  Server enable SNMP traps bfd
  Server enable SNMP traps gdoi gm-early-registration
  Server enable SNMP traps gdoi full-save-gm
  Server enable SNMP traps gdoi gm-re-register
  Server enable SNMP traps gdoi gm - generate a new key-rcvd
  Server enable SNMP traps gdoi gm - generate a new key-fail
  Server enable SNMP traps gdoi ks - generate a new key-pushed
  Enable SNMP traps gdoi gm-incomplete-cfg Server
  Enable SNMP-Server intercepts gdoi ks-No.-rsa-keys
  Server enable SNMP traps gdoi ks-new-registration
  Server enable SNMP traps gdoi ks-reg-complete
  Enable SNMP-Server Firewall state of traps
  SNMP-Server enable traps ike policy add
  Enable SNMP-Server intercepts removal of ike policy
  Enable SNMP-Server intercepts start ike tunnel
  Enable SNMP-Server intercepts stop ike tunnel
  SNMP server activate ipsec cryptomap add traps
  SNMP server activate ipsec cryptomap remove traps
  SNMP server activate ipsec cryptomap attach traps
  SNMP server activate ipsec cryptomap detach traps
  Server SNMP traps enable ipsec tunnel beginning
  SNMP-Server enable traps stop ipsec tunnel
  Enable SNMP-server holds too many associations of ipsec security
  Enable SNMP-Server intercepts alarm ethernet cfm
  Enable SNMP-Server intercepts rf
  Server enable SNMP traps vrfmib vrf - up low-vrf vnet-trunk-up low-trunk-vnet
  Server RADIUS dead-criteria life 2
  RADIUS-server host 192.168.10.10
  Server RADIUS 2 timeout
  Server RADIUS XXXXXXX key
  !
  !
  !
  control plan
  !
  !

  Line con 0
  privilege level 15
  connection of authentication radius_auth
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  transport output pad rlogin lapb - your MOP v120 udptn ssh telnet
  StopBits 1
  line vty 0 4
  privilege level 15
  connection of authentication radius_auth
  entry ssh transport
  line vty 5 15
  privilege level 15
  connection of authentication radius_auth
  entry ssh transport
  !
  Scheduler allocate 20000 1000
  NTP-Calendar Update
  Server NTP 192.168.10.10
  NTP 64.250.229.100 Server
  !
  end

  Router ipsec crypto #sh her

  Interface: GigabitEthernet0/0
  Tag crypto map: SDM_CMAP_1, local addr 76.W.E.R

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
  Remote ident (addr, mask, prot, port): (192.168.168.213/255.255.255.255/0/0)
  current_peer 75.X.X.X port 2642
  LICENCE, flags is {}
  #pkts program: 1953, #pkts encrypt: 1953, #pkts digest: 1953
  #pkts decaps: 1963, #pkts decrypt: 1963, #pkts check: 1963
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
  Errors #send 0, #recv 0 errors

  local crypto endpt. : 76.W.E.R, remote Start crypto. : 75.X.X.X
  Path mtu 1500, mtu 1500 ip, ip mtu IDB GigabitEthernet0/0
  current outbound SPI: 0x5D423270 (1564619376)
  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:
  SPI: 0x2A5177DD (709982173)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel UDP-program}
  Conn ID: 2115, flow_id: VPN:115 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4301748/2809)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE (ACTIVE)

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0x5D423270 (1564619376)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel UDP-program}
  Conn ID: 2116, flow_id: VPN:116 on board, sibling_flags 80000040, crypto card: SDM_CMAP_1
  calendar of his: service life remaining (k/s) key: (4301637/2809)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE (ACTIVE)

  outgoing ah sas:

  outgoing CFP sas:

  Routing crypto isakmp #sh its
  IPv4 Crypto ISAKMP Security Association
  DST CBC conn-State id
  76.W.E.R 75.X.X.X QM_IDLE 1055 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  

  

  In your acl, nat, you will need to refuse your VPN traffic before you allow the subnet at all. Just put all the declarations of refusal before the declarations of licence.

  Sent by Cisco Support technique iPhone App

• Remote VPN - no remote LAN connectivity

  Hi all

  I'm having a problem with my remote access VPN to home. I have a router 800 series which is serves as the VPN (this is also my ADSL router modem), and there isn't enough work as it should...

  I can establish a connection to the outside world, and when I run show crypto isakmp/ipsec his I see relevant entries. However, my problem is that once connected, I cannot ping anything in my local network. I can't ping even inside my ADSL router interface. I have another 800 series which is the next leap in broadcasting wireless clients, and is not accessible by ICMP either when it is connected through the VPN.

  I won't go through all the troubleshooting steps that I've taken the case, this post will be a saga. I guess it's a routing problem or a NAT? It is not all NAT entries for the VPN client when it is connected, so I think that I bypassed that correctly.

  I stripped my config back a bit just to try to make it work, I've pasted below:

  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  encryption password service
  !
  hostname blah - blah
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5

  !
  AAA new-model
  !
  !
  local AAA_VPN AAA authentication login
  local AAA_VPN AAA authorization network
  !
  AAA - the id of the joint session
  !
  resources policy
  !
  !
  !
  IP cef
  IP domain name blah.com/results.htm
  name-server IP 208.67.222.222
  property intellectual ssh
  property intellectual ssh

  property intellectual ssh
  no accounting vlan
  !
  !
  !
  username secret blah 5

  username password blah 7
  !
  !
  crypto ISAKMP policy 1
  BA aes
  preshared authentication
  Group 2
  life 3600
  !
  ISAKMP crypto client configuration group xxxxxx
  password key 6
  pool VPN_address_pool
  !
  !
  Crypto ipsec transform-set VPN_transformset aes - esp esp-sha-hmac
  !
  Crypto-map dynamic dyn1 10
  game of transformation-VPN_transformset
  reverse-road remote-peer x.x.x.x (the ISP gateway address)
  !
  !
  list of authentication of card crypto client VPN AAA_VPN
  VPN isakmp AAA_VPN crypto card authorization list
  open crypto map configuration VPN client address
  crypto map VPN client configuration address respond
  VPN ipsec-isakmp dyn1 10 crypto dynamic map
  !
  Bridge IRB
  !
  !
  interface Loopback0
  no ip address
  Shutdown
  !
  ATM0 interface
  xxxx.xxxx.xxxx Mac address
  no ip address
  no ip redirection
  no ip unreachable
  No atm ilmi-keepalive
  DSL-automatic operation mode
  !
  point-to-point interface ATM0.50
  link to high-speed description
  DHCP IP address
  IP mtu 1492
  NAT outside IP
  IP virtual-reassembly
  no link-status of snmp trap
  ATM with a road ip bridge
  PVC 0/101
  aal5snap encapsulation
  !
  VPN crypto card
  !
  interface FastEthernet0
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  !
  interface Vlan1
  no ip address
  Bridge-Group 1
  !
  interface BVI1
  description of the LAN interface
  IP x.x.x.x 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  IP local pool VPN_address_pool x.x.x.x where x.x.x.x (do not overlap with any of my other used private beaches)
  IP route 0.0.0.0 0.0.0.0 x.x.x.x (Gateway ISP)
  IP route x.x.x.x 255.255.255.0 x.x.x.x
  !
  no ip address of the http server
  no ip http secure server
  IP nat inside source tcp static x.x.x.x interface ATM0.50 x x
  IP nat inside source map route ROUTE_MAP_VPN interface ATM0.50 overload (prevents the VPN pool specified in the line to refuse to ACL_NAT_VPN to be translated)
  IP nat inside source tcp static x.x.x.x interface ATM0.50 x x
  !
  ACL_NAT_VPN (basis of the road map) extended IP access list
  refuse the x.x.x.x (pool VPN) 0.0.0.255 ip x.x.x.x 0.0.0.255
  allow an ip x.x.x.x 0.0.0.255
  allow an ip x.x.x.x 0.0.0.255
  allow an ip x.x.x.x 0.0.0.255
  !
  access-list 1 permit x.x.x.x 0.0.0.255
  access-list 1 permit x.x.x.x 0.0.0.255
  177 permit icmp any one access list - ignore, used for troubleshooting
  ROUTE_MAP_VPN allowed 10 route map
  corresponds to the IP ACL_NAT_VPN
  !
  !
  control plan
  !
  Bridge Protocol ieee 1
  1 channel ip bridge
  !
  Line con 0
  exec-timeout 0 0
  Synchronous recording
  no activation of the modem
  line to 0
  line vty 0 4
  exec-timeout 0 0
  Synchronous recording
  transport input x
  !
  max-task-time 5000 Planner
  end

  Well, if you see encrypted/decrypted packets move away a lot of problems.

  You can TEST inside the router of the VPN Client (LAN) IP?

  This local network should have a default gateway pointing to the router or a route from the pool of VPN.

  Federico.

• Easy VPN support

  Hello all.

  I'm putting in place an easy VPN between a router connection, 2811 and year 887. I'm getting a few errors which I can't solve. Your help with this would be greatly appreciated

  They are set up as follows, with the intention that the 887 can be put in a home user, connected to their generic router DSL and provide connectivity in the enterprise. In this configuration, it is a 877, but the intention is that the configuration of this device should not be set.

  NAT firewall external IP to the 10.228.156.33 address present on R3

  Trying to connect to R1 R3, but returns the error

  08:48:42.905 11 Oct: % CRYPTO-4-EZVPN_FAILED_TO_CONNECT: EZVPN (Remote) Ezvpn is in the READY State, the previous status was CONNECT_REQUIRED and event is CONN_UP. Session is not after 180 seconds of login, the connection reset

  08:48:42.905 11 Oct: % CRYPTO-6-EZVPN_CONNECTION_DOWN: user (customer) = group = GroupName Client_public_addr = 172.17.4.43 Server_public_addr = 1.2.3.4

  and a sh crypto isakmp sa, indicates a connection R3, but it happens to expire after 180 seconds

  R3 displayed a route to 10.153.100.0/24 via f0/1, but not HIS R1 fo

  User names, passwords and keys are correct, but removed the configs below

  Thanks for your help

  

  Config of R1

  router host name
  !
  boot-start-marker
  boot-end-marker
  !
  !
  Select the secret xxxx

  !
  No aaa new-model
  Crypto pki token removal timeout default 0
  !
  !
  IP source-route
  IP cef
  !
  !
  !
  !
  client IP dhcp pool
  Network 10.153.100.0 255.255.255.0
  router by default - 10.153.100.1
  10.203.2.10 DNS server
  !
  !
  No ipv6 cef
  !
  !
  license udi pid C887VA-W-E-K9 sn xxxxx!
  !
  username privilege 15 password 0 xxxxx xxxx
  !
  !
  !
  !
  VDSL controller 0
  !
  !
  !
  !
  !
  Crypto ipsec client ezvpn remote control
  connect auto
  Group groupname key xxxxxx
  network extension mode
  1.2.3.4 xauth userid interactive Peer mode
  !
  !
  !
  !
  !
  ATM0 interface
  no ip address
  Shutdown
  No atm ilmi-keepalive
  !
  interface Ethernet0
  no ip address
  Shutdown
  !
  interface FastEthernet0
  no ip address
  !
  interface FastEthernet1
  switchport access vlan 2
  no ip address
  !
  interface FastEthernet2
  switchport access vlan 2
  no ip address
  !
  interface FastEthernet3
  switchport access vlan 2
  no ip address

  !
  interface Vlan1
  DHCP IP address
  Crypto ipsec client ezvpn remote control
  !
  interface Vlan2
  IP 10.153.100.1 255.255.255.0
  Crypto ipsec client ezvpn remote inside
  !
  IP forward-Protocol ND
  IP http server
  no ip http secure server
  !
  enable IP pim Bennett
  IP route xxxxx 255.255.255.255 Vlan1
  !
  not run cdp
  !
  !
  !
  !
  !
  Line con 0
  exec-timeout 0 0
  line to 0
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  StopBits 1
  line vty 0 4
  opening of session
  transport of entry all
  !
  Scheduler allocate 20000 1000
  end

  R3 #.

  no password encryption service

  !

  hostname R3

  !

  boot-start-marker

  boot-end-marker

  !

  Select the secret xxxxx

  !

  AAA new-model

  !

  !

  local VPN_xauth AAA authentication login

  local VPN_group AAA authorization network

  !

  AAA - the id of the joint session

  !

  !

  IP cef

  !

  !

  voice-card 0

  No dspfarm

  !

  username privilege 15 password: xxxx xxxx

  Archives

  The config log

  hidekeys

  !

  !

  !

  !

  crypto ISAKMP policy 1

  BA aes 256

  preshared authentication

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  ISAKMP crypto client configuration group groupname

  key xxxxx

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto ipsec remote access profile

  !

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  !

  !

  list of authentication of card crypto clientmap client VPN_xauth

  card crypto clientmap VPN_group isakmp authorization list

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  !

  !

  !

  interface FastEthernet0/0

  IP 10.203.4.33 255.255.255.0

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/1

  IP 10.228.156.33 255.255.255.0

  full duplex

  Speed 100

  clientmap card crypto

  !

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 10.228.156.254

  IP route 10.0.0.0 255.0.0.0 10.203.4.254

  !

  !

  IP http server

  no ip http secure server

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  exec-timeout 360 0

  password xxxx

  !

  Scheduler allocate 20000 1000

  !

  end

  Hello geoff,

  Found something...

  on the R1, the peer is configured as 193.128.190.33 but that IP is not set in R3 is natted on firewall? If so, we allowed the udp port 4500 to this ip address?

  concerning

  Harish