My CC app says that it is to install an update, not related to a product. It will not start and says it's installing an update. I can't sign in or use one of my apps or get my files
Help
Restart your computer and then try to open applications.
I hope this helps.
Concerning
Megha Rawat
Tags: Adobe
Similar Questions
-
I'm using Photoshop CS4 on an iMac with OS Lepord of snow. Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine. My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @
You must click on this link 150:30 blue and start with message 11.
Don't forget to leave a space after sudo python before submitting the script.
Remember that you will not see your password when you enter it when calling to make.
-
After subscription and downloading and installing Acrobat DC, I can open it, but when I try to use one of the tools, I get the message that my trial has expired.
Can someone help me?
Hello
It is a problem of Activation, please follow the instructions at the link below, it should help solve the problem:
Connect and disconnect activate Cloud Creative applications
Applications creative Cloud back in test mode after an update until 2015 for CC
Let us know if that helps.
Kind regards
Bani
-
Two days ago my internet connection has been cut, and then I tried to find out. I opened the Troubleshoot, it says that I need to install a driver for my network card. I use Windows 7 Ultimate. What should I do? Should I re install windows 7 ultimate on my computer?
Hello
What brand / model of the computer?
There is no need to re - install Windows 7. You just need to install the network card drivers. Check out the link and follow the steps.Automatically get recommended drivers and updates for your hardware
http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardwareUpdate drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links -
I get windows did not start and each time that I reboot I get the same thing.
* Original title: Windows7
O my pc displays a boot device error so I put in a disk hard new1tb and reinstalled Windows 7 and install goes ok just a little slow, but after the installation is completed after the first reboot I get windows did not start and evry time I reboot I get the same thing tried several hard drives and get the same error not sure of the material cause I can load in the bios very well any help would be great
In addition:
Clear CMOS - 3 ways to clear the CMOS - reset the BIOS
The setup of the BIOS or UEFI firmware, search for UEFI settings so that you can follow special steps to install UEFI below. Also set SATA controller on AHCI, hard drive, all on first start (or if UEFI Boot Manager WIndows).
Then just follow these steps for a clean reinstall Windows 7 making sure to remove all partitions up to unallocated space to make it cleaner. Follow special steps if you have a UEFI BIOS, which will have a system partition EFI in Managment of disk instead of reserved system (MBR) and make sure that the SATA controller is set to AHCI.
Other important to overcome optmizations install them hedges here to resolve the failures of Windows Installation 7
-
We can install adobe cloud programs on several workstations, but only use one at a time?
We can install adobe cloud programs on several workstations, but only use one at a time? Or would it be better to install on our server and having people log in and use them from there?
HI André,.
A single License can only be installed on uptill 2 computers only and yes you can use one at a time . This part of EULA (end user license agreement ) is only applicable for prepetual licenses .
For Creative Cloud subscription , you are able to install the products on two computers and you can use both of them at the same time as well.
Thanks & Regards,
Kartikay Sharma
-
All of a sudden my Epson Workforce 345 all-in-one printer will not print. I get a message that the local print spooler service is not available and I need to restart the spooler. What does that mean?
Hello
Check with the manufacturer of the printer for updated drivers, support and Forums for
known issues.Check with Epson support, their documentatiion online and drivers. As it's Epson OEM
responsible for the proper functioning of the printer and their drivers provided.If there is that no Windows 7 drivers try the Vista drivers if those that exist.
Epson - Support us.
http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=YesEpson - support from Europe
http://www.Epson.co.UK/support===============================
Check chan seen message here - one of the highest.
fixed spooler subsystem app stopped working
http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e===================================
Follow these steps in the kind of prerequisites:
Clean the General corruption and repair or replace the damaged/missing files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html------------------------------------------------------
References to Vista also apply to Windows 7.
Go to the printer manufacturer's website and get the latest drivers - download - REGISTER - install yet. When loan
to install - make a right-click on the pilot - run as administrator.Also check with your support and the Forums printer manufacturer.
--------------------------------------
Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
the latest driver).Check Mr. Fixits here and if you use the other methods go back and try again later.
Problems of print and error - a Mr Fixit of printing
http://support.Microsoft.com/GP/printing_problemsSolve printer problems - a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx------------------------------------------------------
Logon as administrator
Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN
You can copy and paste each line except those brackets and press ENTER after each.
net stop Spooler
(echo suppression of all print jobs)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
del/q %SystemRoot%\system32\spool\printers\*.*
net start Spooler
(sound Done!)<-- you="" should="" see="" this="">
ping localhost n 4 > zero
Another way
http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspxIf you use Control Panel - devices and printers
Try after unplugging your printer if necessary.
-------------------------------------------------------------Also check the spooler print and its dependencies and addictions Service.
Windows 7
http://www.blackviper.com/2009/01/13/black-vipers-Windows-7-service-configurations/#more-2989Windows 7 Service Pack 1
http://www.blackviper.com/2010/12/17/black-vipers-Windows-7-Service-Pack-1-service-configurations/How difficulty Windows Vista print spooler starts do not
http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html------------------------------------------------------------
Check this thread if necessary - to stop and erase the spooler
and here
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Computer not starting and I get an error message
After that I ran the microsoft of what free security scan it found some files that were Trojan horses that he couldn't get rid of, so I deleted manually solve them some of the problems that I had. The end of the analysis told me to restart my computer so I did. But now it will not start and I get an error message that says: "a problem has been detected and windows has shut down to prevent damage to your computer. Then he told me to check the virus and to ensure that it is configured correctly and run the CHKDSK command to check the alteration of the hard disk and restart my computer. How am I supposed to do all this if I can't even start up? I tried to go into safe mode, but the same screen comes up. He gives this technical information at the end of the message. STOP: 0x0000007B (0xF79E4524, 0xC0000034, 0x00000000, 0x00000000) if someone could help me it would be so awesome thank you.
Hello
Check the disk for malware:
Create a Bootable CD with the Trinity Rescue Kit - free - which comes with 5 antivirus programs
Integrable Hirem is another choice - more can be found using Google.Trinity Rescue Kit - download on top right of the page
http://trinityhome.org/home/index.php?wpid=1&front_id=12CD of Hirem boot is another good choice
http://www.hirensbootcd.NET/Download.html
http://www.hirensbootcd.NET/CD-contents/138-HBCD-111.htmlScan a Windows PC for viruses from a Ubuntu Live CD
http://www.howtogeek.com/HOWTO/14434/scan-a-Windows-PC-for-viruses-from-a-Ubuntu-Live-CD/===================================================================
You can also save the data and re-install Windows 7. The hard drive can be set
another computer as a 2nd drive (the best) or in an external USB enclosure. Either would allow
allows you to copy the data to removable media such as CD, DVD or other USB drives.Or you can use a boot Ubuntu CD to back up data.
Use Ubuntu Live CD to backup files from your Windows computer dead
http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer===================================================================
For slightly more:
BCCode: 7B 0x0000007B
INACCESSIBLE_BOOT_DEVICE bug control has a value of 0x0000007B. This bug check indicates that the Microsoft Windows operating system has lost access to the system partition during startup.
Important information if you have received a STOP Code
If you have received a blue screen error, or stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer connect with Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
The following actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
Cause
Bug INACCESSIBLE_BOOT_DEVICE control often occurs due to a failure of the boot device. During the initialization of the I/O system, the boot device driver could have no initialize the boot device (usually a hard drive). Initialization of file system may have failed because it does not recognize the data on the boot device. In addition, repartition the system partition or installing a new SCSI adapter or disk controller could encourage this error.
This error can also occur because of incompatible disc material. If the error occurred in the initial configuration of the system, the system have maybe installed on an unsupported drive or a SCSI controller. Some controllers are supported only by the drivers that are in the library of drivers Windows (WDL). (These drivers require the user to perform a custom installation.)
Resolution
This error always occurs during the startup of the system. This error often occurs before the debugger connection, kind of debugging can be difficult, if not impossible.
Fix a defective boot device: If a boot device is at fault, you must change the boot options. For more information changing these options, see Software Configuration on the target computer.
Solve a problem of incompatible hard disk: If the installation program automatically detects the controller, you may have to skip the detection and the disc of the specific manufacturer allows to load the driver. Also, check the availability of updates for the firmware of the system BIOS and SCSI controller. Updates of this kind are usually available on the website or BBS of the hardware manufacturer.
Delete all material recently added, especially of hard disks or controllers, to see if the error is resolved. If the problematic material is a hard drive, the firmware version of the drive may be incompatible with your version of the Windows operating system. Contact the manufacturer for updates. If you have removed another material element and the error is resolved, conflicts of port IRQ or i/o likely exist. Reconfigure the new device according to the manufacturer's instructions.
Confirm that the hard disk drivers, hard disk controllers and SCSI adapters are listed in the list of the products tested Microsoft Windows market.
If you have recently added a driver, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the menu of Advanced Options , select the last known good Configuration option. This option is most effective when you add a single driver or service at a time.
In addition, check your computer for viruses using any update, commercial software that examines the Master Boot Record of the disk hard antivirus. All systems of Windows files can be infected by viruses.
This error can also occur due to corruption of the hard drive. Run Chkdsk /f /r on the system partition. You must restart the computer before the start of the analysis of disk. If you cannot start the computer due to the error, use the Recovery Console and run Chkdsk/r.
If you cannot start the system in the last known good configuration, you should try to boot from the Windows CD. Then, you can run Chkdsk from the Repair Console.
Warning If your system partition is formatted with the FAT file system the long file names that use the Windows operating system could be damaged if you use Scandisk or another MS-DOS-based disk tool to verify the integrity of your hard disk from MS-DOS. Always use the version of Chkdsk that matches your version of Windows.
If your system has SCSI adapters, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination. For IDE devices, define the IDE port integrated as primary only. Also check each IDE device for setting good master/subordinate/stand alone . Try to remove all IDE devices except for the hard drives. Finally, check the system log in Event Viewer for additional error messages that might help identify the device or driver that generated the error.
BCCode: 7B 0x0000007B<-- read="" this="">
* 1138.html? order = votes http://www.faultwire.com/solutions-fatal_error/Check-for-viruses-on-your-Computer-0x0000007B-=================================================================
If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
protected. The manufacturer of your system will also sell the physical DVD cheap since you already
Clean Windows. You can also do an ERD on another computer.Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
return and then try to startup repair.)How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7Try the disk Options recovery or Windows 7 startup repair.
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlAlso from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.htmlRetry After Chkdsk startup repair.
If after those you can try the system restore to fashion without failure or the valuation or Windows 7
disc.How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html--------------------------------------------------------------------
If you need to repair disks - these help repair Windows not re-install.
Often an ERD will help you when the recovery disk does not work.Download Windows 7 system recovery discs - charge now $9.75 for ISO
images to make the discs.
http://NeoSmart.net/blog/2009/Windows-7-system-repair-discs/How to create a Windows 7 - free system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html======================================
If necessary:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctlyHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorialsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
Application does not start and does not respond. Closed that it self.
Hi guys
I made a game for the BlackBerry using Flash Pro CS6 z10. I tried it in the Simulator and I installed it in a system z10.
To do this, I packed the bar and signed the app using the command line and I send the Simulator and the device with the HELP of graphics OS Tablet.
Everything works perfectly, in the SIM and the device... However, when I presented the game on the portal of the seller for review and approval, I had... "correct the following issues and resubmit your application as a new version."
I'm testing your app on the BlackBerry Z10. When I press the icon for your application, it does not start and does not respond. Closed by it self. » ...
Anyone know how to solve this problem or what can I do? (and why it's working ok for me and not them?)
Thank you very much!
OK, I downloaded your app and checked that it uses Stage3D (you renderMode value to indicate in the app.xml file). I tested it in point 10.2 and it works for me. When using the portal provider make sure you specify BlackBerry 10.2 or higher.
-
Anyone know how to get your money back? My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me. I'm new to the CC Apps but use the versions installed for years. The amount of questions listed here in this forum, I have to ask the product is really stable?
Thank you. I've deleted and reinstalled. Seems to have solved the problem.
-
my windows firewall does not start and I get a erroe code 5, can someone help me
my windows firewall does not start and I get a erroe code 5, can someone help me
Hello
1. What is the brand and model of the computer?
2. what security software is installed on the computer?
3. have you made changes on the computer recently?
Method 1.
To resolve this problem, click the fix button of this article to diagnose and fix common Windows Firewall problems automatically.
Some services start not in Windows Vista and Windows 7: http://support.microsoft.com/kb/943996
Method 2.
Automatically repair the settings of Windows security to secure your PC: http://support.microsoft.com/mats/Malware_Prevention/
To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows
For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry
I hope this helps.
-
CS 5 will not start. Scratch disk cannot be found. How can I get photoshop to start?
CS 5 will not start. Scratch disk cannot be found. How can I get photoshop to start?
Hi Rsrich,
Please follow the steps below to reset the Photoshop preferences.
> Hold down the SHIFT key, command and Option (in Mac) or shift, Ctrl, and Alt (Windows) key and click on the Photoshop CS5 icon until you get a dialog box to delete the settings of Photoshop file.
> Click Yes to it.
Note: Using the hotkey, preference files for custom shortcuts, workspaces, and color settings will also reset to the default.
Also, please mention the operating system you are using.
Let me know if it helps.
~ UL
-
By typing the e-mail address that I sent emails to before I have to change so my computer will remember these e-mail addresses, as Explorer does? I can't find my email settings?
It's called autocomplete. Please read the article Firefox saves web form entries notbecause it should solve the problem.
-
Firefox sometimes refuses to start and a cautionary note saying (ddl c:\program files\mozilla firefox \xul.ddl) is a problem, I restart the computer 2 - 3 times and he eventually found. Can someone tell me what the problem
Thanks Bob
Hello
Some Firefox problems can be solved by performing a clean reinstall. This means that you delete your Firefox program files, and then reinstall Firefox. This process does not delete your Firefox profile (such as bookmarks and passwords) data, since this information is stored in a different location.To do a clean reinstall of Firefox, follow these steps: Note: you can print these steps or consult them in another browser.
- Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
- Once the download is complete, close all Firefox Windows (or open the Firefox menu
Click the close button
).
- Remove the Firefox installation folder, which is located in one of these locations, by default:
- Windows:
- C:\Program Files\Mozilla Firefox
- C:\Program Files (x 86) \Mozilla Firefox
- Mac: Delete Firefox in the Applications folder.
- Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
- Windows:
- Now, go ahead and reinstall Firefox:
- Double-click on the downloaded Setup file and go through the steps in the installation wizard.
- Once the wizard is completed, click to open Firefox directly after clicking the Finish button.
More information on the resettlement of Firefox can be found here.
WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.
Please report to say if this helped you!
Thank you.
-
SE error message: Task Scheduler not started and unable to use the backup on my computer
"Original title: re start task sheduler. __
Hi... I can not use backup on my computer... message saying not started from Task Scheduler appears... then start Task Scheduler... that I can't do no matter what advice or solution suggested that I use.can someone help please.
PS... my computer skills are limited but can follow instructions ok thank you very much in advance.
Hi pewsey,.
1. When did you start to question?
You can check out the following link and try the steps by Arona A Microsoft Support, Moderator Thursday, December 31, 2009 16:13 and check if this may help resolve the problem:
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
-
Question on the percentage of meter works - M40X-119
I have problem on the battery indicator, when I plug in AC, charge indicator power off batteries decreases too quickly to 7, but when it comes to 7, it does not change until about 2 pm. So there is no problem on my battery I think. No matter what sof
-
MacBook Pro with the Retina display problem
I put my 2013-model MacBook with Retina display to sleep and tried to turn it on the next day, but he had no answer. I've loaded and kept cool for about 8 hours, but the battery would not get full and it won't always turn. The next day, I continued t
-
is it possible to use family sharing, but continue to make our purchases separately, as before, we used part of family? We use all individual Apple ID and the password associated with them and they charge the same credit card, we would like to be abl
-
Develop the VI for acquisition of data that is actually disconnected from the PC
Hello Data acquisition for which I develop a VI is in fact used for certain jobs, so it is not connected to the PC. Is it possible to 'activate' the device in order to use their resources for development purposes. Thanks in advance
-
ccSvcHst.exe consumes CPU: (XP Media Center 2002 w/Service Pack 3) PC does not respond, until ccSvcHst.exe completes his domination of CPU from 30 to 90 minutes. Completely consumes 100% CPU AMD Athlon 64 4000 + (4 GB RAM). Has always been a problem