SE error message: Task Scheduler not started and unable to use the backup on my computer

Similar Questions

• file mflmsv.dll (Rundll) could not start and unable to use iTunes.

  Original title: mflmsv.dll (Rundll) file

  When I connect it says that runndll could not start. In my view, it is up to my itunes.  When I went to a ph of windows, I downloaded zune.  I always have my iPod and an iphone and I can't seem to get my itunes to work

  Hello

  Please provide the following details.

  1. You get this error when you turn on your computer?
  2. What is the exact full error message?
  3. What happens when you turn on iTunes on your computer? It gives you an error message when it does not work?

  RunDLL is a legitimate Windows file that runs / loads .dll (Dynamic Link Library) modules, which can also be legitimate or sometimes malicious associated. RunDLL could not start message occurs generally when the .dll file that is configured to run at startup in the registry or as a scheduled task has been deleted. Windows attempts to load this file (s) but cannot locate because the file was most likely removed during an anti-virus or anti-malware analysis.

  I suggest to download AutoRuns and save it to your desktop. You can download it from the link below.

  Autoruns for Windows v11.70

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  1. Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
  2. Open the folder and double-click on autoruns.exe to run. Right-click and select run as administrator.
  3. Please be patient as it scans and fills the entries.
  4. When you are finished scanning, it will say loan to the downstairs and the list of all entries on the all tab.
  5. In the main menu, click file > find and type the name of the file (backgroundcontainer.dll) related to the error message, and then click Next.
  6. Alternatively, you can scroll through the list and find any writing about backgroundcontainer.dll and them.
  7. If found, right click on the entry, then select Remove.
  8. Out Autoruns and restart your computer when it is done.

  For the problem with iTunes, I suggest you to follow the steps below and check if it helps.

  iTunes for Windows Vista, Windows 7 or Windows 8: unexpected Fix closes or launch questions

  http://support.Apple.com/kb/ts1717

  Write us with the details asked, we will help you.

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.

• Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Please help, my other computer shows an error message: "Windows did not start because of an error in the software: load needed DLLs for kernel.

  Hello

  ·          What is the number and the model of the computer?

  ·          What is the service pack installed?

  ·          The meadow of operating system has been installed on the computer?

  ·          Do you remember any changes made on the computer before the show?

  Try the steps listed in the link below: how to fix a computer that does not start: http://www.microsoft.com/windowsxp/using/setup/support/nostart.mspx

  You can also check: Error Message: Windows could not start because of the mistake in... : http://support.microsoft.com/kb/326671

• Error message: Windows has not start because the following file is missing or damaged

  This error sometimes occurs when starting upwards from my Win XP computer:
  Windows could not start because the following file is missing or damaged. Windows root\system32\hal.dll. Please reinstall a copy of the above file.
  the computer then complete the beginning upward and operate normally.

  How can I stop this error message?

  Kind regards

  Hello

  ·         Since when are you facing this problem?

  ·         Remember to make changes to the system?

   

  I suggest to disable the startup items when the system starts up and then check if the problem is resolved.

  How to disable programs that run when you start Windows XP Home Edition or Windows Vista

  http://support.Microsoft.com/kb/270035

  I suggest following the steps mentioned in the article below and check if

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• try to start the bonjour service, but get the error message: windows could not start the Bonjour service on local computer

  error message
  Windows could not start the Bonjour service on local computer
  Error 5 access is denied

  I have Vista Home.

  This prevents me to update I have tunes.

  Completely uninstall iTunes. Download the update manually from Apple or here. Restart the system and then install the software you have downloaded.

• my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem. __

  my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.

  Try to restart your machine and pressing F8 before the spash screen Windows appears.  Choose the option "last last known good configuration".

  If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.

• Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  The amount of problems listed here in the forum, I have to ask the product is real

  Anyone know how to get your money back?  My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me.  I'm new to the CC Apps but use the versions installed for years.  The amount of questions listed here in this forum, I have to ask the product is really stable?

  Thank you.  I've deleted and reinstalled.  Seems to have solved the problem.

• Error message: your browser must have Java enabled to use the Client for Java when you try to access the Citrix server.

  Original title: java question.

  I'm trying to access the Citrix server to access my work server.  When I click on an application, I get an error message: your browser must have Java enabled to use the Client for Java.  I checked and the right version of Java installed and removed the old Java applications but still this message when trying to access Citrix.  Please meet w / directions for a fix.

  Start by seeing if Java has been installed correctly:

  http://www.Java.com/en/download/testjava.jsp

  or
  http://javatester.org/

• can not defragment, task scheduler not started, but it's

  Running Windows 7 Home Premium. When I try to run Defrag, I get the message that it will not run because the Task Scheduler service is not started. When I check the Task Scheduler service, that it IS running and the game runs automatically. What should I do to solve it?

  Jim T

  I solved the problem by going to Tools\Defragment Administrative and optimize readers. I could then manually run Defrag and also restore the defragmentation task that was missing in Task Scheduler. Everything is OK now. Thank you for your return to me.

  Jim T

• Tecra 8100 - does not start and no activity on the screen

  Hello

  My Tecra 8100 not start or take me to the BIOS Setup. It lights up, swirls the hard drive, but there is no activity on the display. The only way I can get something on the screen is turning with the F12 key when I get the 'ready for the update of the BIOS. Place the BIOS update diskette in the drive "... message. So I tried the traditional method of updating the BIOS, found on the Toshiba site, but nothing helped. The machine seems to read the disk (that contains the downloaded BIOS) but does nothing. It is just there for centuries, with the disk light.

  The last two days I have trawled thro much views and even took the whole machine goes to check the connections loose, but I found no answer yet.

  Can someone out there please help?

  Thank you very much

  Hello Rory

  I did the BIOS to be updated several times, but I've never seen this message at startup upward. You did it the traditional method as described in the document which you will find under http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=B IOS & FID = TRO0000000b07?

• Error step 7, creation of WebCenter, and schemas content using the remote control

  Hi all

  I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.

  This is the content of install_setup.log

  Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance

  Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..

  localhost.localdomain:1521:ORCL

  Installation of patterns Begin spaces

  Please enter the password(User:sys) of the database:

  Processing of command line...

  Timeout connecting to the database. Current timeout value is 30 seconds.

  UCR-6090: jump main operation: validation step connection failure

  And the rcu.log

  14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...

  14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...

  14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))

  14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))

  14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:

  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.

  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)

  at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)

  at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)

  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)

  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)

  2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure

  2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure

  Any suggestions?

  Best regards!

  Hello

  (1) you see no error on the Setup screen? If Yes please download the screenshot?

  (2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.

  Also, can you please try the following and check the box.

  Go to the location / / rcu/config /

  Take backup for the file rcu.properties, and then change the below

  JDBC_LOGIN_TIMEOUT = 30

  TO

  JDBC_LOGIN_TIMEOUT = 300

  and try again.

  Concerning

  Françoise

• XP does not start normally. Must use the F8-last known good configuration.

  For the last three days, XP does not start normally. I use F8 and you select last known good configuration that worked. It gets old. If I try to boot normally, it freezes on Autontfs not found I have a MSI wind Pc with Windows XP Service Pack 3.

  Hello Susanherna,

  The last known good configuration is created during the logon process. This means that something has changed between the time that connect us and time that shut down us the computer.

  At the next startup, select instead of last known good configuration safe mode.

  We want to then try a clean boot.

  The following articles describe this process on Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Let us know what are the results of this and we will continue from there.

  Best regards

  Matthew_Ha

• I get the message "files for the recovery diskette could not be created" when you use the backup utility. Why?

  I was using the Backup Wizard, backup all info on the computer to an external hard drive and insert a diskette in the drive.

  Hello

  · What is the edition of windows that you have installed?

  · What is the service pack installed?

  Try the steps listed in the link below: year Error Message is displayed when you try to use the Automated System Recovery Wizard: http://support.microsoft.com/kb/302700