My CC PS refuses to acknowledge my GPU

Similar Questions

• Toshiba AT200 refuses to acknowledge my connection wireless home

  My AT200 refuses to acknowledge my connection wireless home.
  1st time, that he could not recognize, I restarted the broadband system and then recognized.

  Now he just continues to scan and will not find the connection?
  I tried to manually force but he said that it is not in the range - even when I'm standing right next to the box.

  This is a major issue - what is a Tablet without wifi connection - right?

  > Is there a way to reset to the factory settings?
  To reset to factory settings Android, go to:
  Apps-> settings-> privacy-> data reset > reset compressed-> clear all

• I have the last El Captain MAC update fom and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

  I have the latest update of El captain and an iMac Mid 2015 retina but Lightroom refuses to use the GPU indicating a display error. Has anyone else experienced the same question?

  I also got an iMac mid 2015 27 "retina and not have problems. But I have another option 'see the add screen pictures"deselected it's the ravages of a single reading. See screenshot of my graphics card.

  

• I'm upgrading LR from V5 to V6 and the installation software refuses to acknowledge my V5 serial number.

  I'm upgrading LR from V5 to V6 and the installation software refuses to acknowledge my V5 serial number.

  You enter the serial number for upgrade of LR 6 you would have bought first.

• Windows requires activation, but when I enter the product key, he refuses to acknowledge

  Good evening. I suddenly started to lift a message at startup that my activation has expired and I need to activate. I followed the instructions but as soon as I start on the second series of five letters/numbers in my product code, he refuses to allow me to type the second letter and said that is not valid. I also notice on the bottom of the right hand of my screen telling me

  Windows7

  Build 7601

  This copy of Windows is not genuine.

  It is, as I bought it from Microsoft online in October 2013 (2013 office, Windows 7).

  However, I had to reinstall the program in about seven months due to a hardware problem that caused my laptop down.

  I also reinstalled it yesterday to try to resolve the problem and it does not accept my product key, informing me afterwards, it was installed successfully.

  Can someone please?

  Thank you, Luci

  Make sure you enter the right characters. The following characters that is not used:

  E, U, I, O, A, S, L, Z, N and 1.0

  easy to confuse B and 8 G and 6

  In addition, please note, you cannot use a product ID.

  You can also try phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• iTunes producer refuses to acknowledge my Apple ID

  I downloaded several books on iTunes with iTunes producer.  After the upgrade to El Capitan (have no idea if it is) iTunes producer claims "your Apple ID or password has been entered incorrectly."  I rentered both several times, then clicked through to change the password.  iTunes producer always gives the same error message with the new password.

  How do I rectify this?

  John

  Oke, had the same problem. I fixed it.

  This is because the validation in two stages and requires an additional password for this application.

  This is how I fixed it:

  Go to https://appleid.apple.com/account/manage

  opening of session

  Go to security, Edit.

  Go to the password specific app. Generate a password. use it in your application to itunes producer.

  and your done.

  I hope this can help, good luck!

• members of the team get tiralversion when they connect the first time, after nog activation trial period is possible, they showed in the team, with good ID but adobe refuses to acknowledge the affiliation. Adobe support is the worst ever seen, some Indian

  How I can activate

  Hello

  I apologize for the frustrating experience.

  Don't you see State of the team member of the license as 'Active' on the admin console?

  Please visit: https://helpx.adobe.com/creative-cloud/help/manage-teams-membership.html

  Kind regards

  Sheena

• Why Firefox refuses to go to my chosen homepage. Whenever I open the browser, it is up to Google

  Why Firefox refuses to acknowledge my chosen homepage. Whenever I open the browser, it is up to Google

  This has happened

  Each time Firefox opened

  Today is... July 4, 2010

  Did you put your homepage in Firefox?
  http://support.Mozilla.com/en-us/KB/how+to+set+the+home+page

• Adobe Media Encoder not using GPU at all for H.264 encoding

  So I have a strange problem, it seems SOUL refuses to use the GPU for transcoding - I have a minute 9 4 k file I need to transcode and it takes more than an hour on a very fast machine. I tried other formats and files of that specific file and nothing does the GPU at all (using GPU - Z to monitor the load). Specifically trying to get DNxHR or DNxHD files in H.264 VBR 2 pass codec

  Machine: hex 3960K core i7 core cpu - GPU installed: ti 980 GTX / GTX 1080 - 64 GB RAM Win 10 64 pro

  -First pro uses the GPU (actually 1080) for CUDA acceleration video

  -J' tried to disable 1080 GTX in Nvidia with SOUL Panel (setting preference CUDA at 980ti, as I know, pascal is perhaps not compatible yet)

  -J' original CC, no luck tried versions of SOUL

  -J' tried transcoding other types of files in the case where this was a problem of specific file (animation, cineform, etc.) no luck

  My gut tells me it's maybe a CUDA or OpenCL / OpenGL / DLL problem.

  I had CUDA installed 8.0 for use with Octane render, but uninstalled and it makes no difference

  maybe try a CUDA 7.0 installation? that would help? Any other suggestions?

  Hello tstopdigital420,

  Is the GTX 980ti supported for H.264 encoding in Adobe Media Encoder or not? I thought I had read that it was, but maybe I'm wrong. IF not I'll talk accordingly.

  Parenthesis - anyone knows of other software that supports rendering GPU accelerated by CUDA h.264?

  I think you're under the false impression that the GPU speeds up encoding H.264 exports. It does not, but is a feature that is often requested.

  Encoding is a process that focuses on the CPU in Premiere Pro and Adobe Media Encoder. The GPU accelerates certain elements in the entire export process, but not the encoding itself.

  The GPU will accelerate what follows in the export process: scaling, conversion of the image, blending modes, deinterlacing and color space conversion. The GPU will also speed up the processing of GPU based video effects, including the effect of color Lumetri.

  Example:

  • If you are encoding a file of 4K in a file of HEVC H.265 4 K, the GPU acceleration is not involved in the export process because no scaling has been used.
  • If you are encoding a file of 4K in a file, H.264 HD, GPU acceleration is involved in the export process, because the scale was necessary.

  If your GPU is disabled or "grayed out" and he has capable specifications, then this is another problem of troubleshooting.

  Thank you
  Kevin

• What settings for GPU GTX970m to work in PProCC2015, CC Photoshop & Lightroom CC 2015 2015?

  I have a new laptop Gigabyte P35W v5 with standard spec UK 16 GB of RAM, integrated graphics Intel HD 530 & graphics card NVidia Geforce GTX970m card running under 64-bit Windows 10.

  In first Pro CC 2015 beginning screen does not display correctly (a blank screen) and I am unable to play any video in the source monitor or timeline - I just get a black screen even though the sound is ok. It's the same, only Mercury Playback Engine Software only, CL open or CUDA is selected in the project preferences. If I turn off the graphics card Intel HD 530 or the video GTX970m will play. If the Intel HD graphics card is disabled I am able to select the playback engine Mercury (CUDA) and everything seems to work fine. What settings are required to be activated and functional as I have it on my desk?

  I have a similar problem in Lightroom CC 2015 in the develop module where I have a black screen, unless I have to uncheck the option 'Use the graphics processor' in the Performance preference (which clearly acknowledges the GPU). By clicking on system information in this dialog box includes a line available "GPUDevice:not". If I turn off the graphics card Intel HD 530 or GTX970m, then I am able to select the processor use chart and see the picture.

  I tried various option in the NVIDIA Control Panel to set the graphics popular NVIDIA processor on a global basis and by the program, but this does not seem to make a difference. I updated the BIOS, all drivers through the Smart Update utility from Gigabyte and directly from manufacturers Web sites and reinstalled creative Cloud applications.

  Can any one help object parameters to allow the integrated graphics card Intel and the GPU to be activated and working together?

  It is confusing for programs which charts to use with both running... so stop Embedded Intel, this graphics card you breath the Intel thing to be irrelevant in any case.

  Then, as you have noted, everything works as it should.

  Neil

• Code 39 - video card driver. already tried to reinstall the drivers several times.

  Suddenly, I lived this issue one day after having had a normal life with a new video card.  It was quite well until you restart the next day, where he then reports in Manager device which:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  I am completely puzzled, as I have:

  -If she had problems with drivers-free work provided by the CD the initial day of the installation,
  -A tried several installations of:
  (a) CD drivers provided by.
  (b) latest driver from nVidia.
  (c) later twist driver Xtreme-G.
  (d) to allow Windows Update to install the drivers.
  -Also attempted to return to the old video card and using [compatible] drivers for it, but it returned code 39; This video card, I had no such problems with in the past.

  The first noticeable symptom has been toggled off Aero and the resolution to 640.  I am unable to run several games/etc. as the video card is automatically disabled "because he has a problem.  My graphics card is an ASUS 240 512 DDR5 ENGT, and the old one is eVGA 9400 GT; my OS is Windows 7 x 64.   The first time using the map with this computer, it was compared with the time 3D games Vantage / real and proved to be stable and functional order.

  I can't do a restore with the drivers, or have no system restore points.  Everything is fine and I can still watch videos (assuming that the CPU is handling); I can also run games like Starcraft, which I suppose doesn't require DirectX or anything that requires a dedicated card.

  I tried the sweeper driver as well as the General uninstaller, and he still refuses to acknowledge the drivers - this was done after a full withdrawal of all components of nVidia ("NVIDIA Drivers", PhysX and NVIDIA Control Panel); However, I saw again the nVidia control panel in the Panel of the menu start (no uninstall programs and features). my steps were:

  (1) Uninstall using programs uninstall,
  (2) secure using mode driver sweeper,
  3) reset, once again in SafeMode to aid driver sweeper,
  (4) restart, install the drivers.

  Of this, I was successfully able to disable the generic automatic installation of drivers window; later, I was able to install the video drivers.  However it still does not.  The Control Panel also continues to say, "Now you do not use a screen attached to a NVIDIA GPU", and Device Manager reports code 39.

  I'm running out of ideas, so I'm looking for outside help for this problem - I appreciate any information you may be able to provide.

  Check the programs and features (and memory), I can say that I have nothing else that the drivers installed for the new video card.

  I reinstalled the drivers for the 9400GT when I was testing to see if the replaced card would fail, and he gave the code 39.

  Thanks for your comments.

  EDIT: The problem seems to be fixed after a reinstall of Windows.  I give my thanks to both of you for the effort.

• Move photos iPad on an external hard drive

  I have about 4000 + photos on iPad Pro of vacation, I downloaded from a SD card using an adapter. The photos are distributed among the 15 albums or more. I want to get the end these photos on an external hard drive. Currently they are all saved in my pictures from iCloud, but my only option with iCloud Photos is to download these photos individually, and I don't have the time to download 4000 + photos individually.

  I would import each album into my Mac Photos app, but my Photos Mac app refuses to acknowledge one of the albums. No amount of reset or change the USB port or reload all fixes the problem.

  I tried to use iTunes to get the pictures, but they are not found.

  Ideally I would like to batch download all about iCloud Photos, but there seems not to be this option.

  All this seems unnecessarily complicated. How can I get photos from my iPad on my hard drive? There should be a way to simply drag and drop, in my opinion.

  Thank you ~.

  Try the procedure described in this article from Apple:

  Archive or make copies of your iCloud - Apple Support data

• AppleTV not recognizing HomeShared library

  Hi all, for those who have seen this message in its previous location, I decided to move it. Why it is here, no one responded to it in the sharing category then I hope someone help here.

  My apple TV (3rd gen, A1469 model, software version 7.2.1) does not recognize HomeShared of my laptop or desktop, libraries that have both different downloaded content.
  Now, until someone comes up with a copy paste of the troubleshooting page.
  All devices are on the same network.

  All devices have home sharing enabled.

  All devices use the same account for sharing and itunes.
  I restarted the router.

  iTunes is open on both computers all the time.
  I restarted the devices in all possible orders.

  Now, I thought the appleTV was not only interact with other computers, but I can't airplay on both computers to the AppleTV.
  Now, at first I thought that the ATV was just streaming on the internet and not in fact the computer, so I forced to through the option 'Read iTunes in the cloud' Airplay (I have set Auto Off). AirPlay works always.

  So, which leads me to conclude that it can interact with computers, but simply refuses to acknowledge their library for roommate for some reason any.

  Anyone had this problem before?
  Any help is appreciated. Thank you

  Have you checked the necessary computer firewall for home sharing settings. I don't link to the troubleshooting page, since you have already seen.

  You are the poster of this Apple TV not recognizing my iTunes (shared hosting) libraries? You have very similar writing styles...

• Had to reload operating system and applications data, now can't get firefox to recognize the profile data

  My C drive (disk solid state drive), which held my operating system and data from the app crashed. I had it replaced, updated Win 7 to win 10 and have downloaded Firefox. I was able to restore my profile from a Mozy backup data and copied in the Firefox folder. But Firefox resolutely refuses to recognize. I tried using the recovery data from an old profile, but no advantage help page. Tried to use the Manager profile, but without success. When I go to Troubleshooting Information and click on file/Show profile, it comes up with a list of files (files starting with bookmarkbackups, which however is empty, down for webapps, which has the file inside webapps.json), then the files from addons.json down through xulstore.json and the file places.sqlite is 10 240 KB Although there is something in there, but Firefox resolutely refuses to acknowledge my profile, bookmarks, etc..

  I'm out of options and ripping my hair out trying to get all my favorites, in which I have a lot of information such as the authentication of data for many favorite sites. It is frustrating that all the information seems to be there, but Firefox ignore all.

  Can anyone help?

  Such a backup is perhaps a ZIP archive containing all the files into it if it is not a real file, but only one file.

  Note is that you replace the file places.sqlite with a copy of the backup that you have to make sure to remove existing places.sqlite - shm and temporary files to SQLite places.sqlite - wal.
  Ditto for the other SQLite files that you are restoring.

  Have you checked the application.ini file in the backup?

• AppleTV not recognizing HomeShared libraries.

  My apple TV (3rd gen, A1469 model, software version 7.2.1) does not recognize HomeShared of my laptop or desktop, libraries that have both different downloaded content.
  Now, until someone comes up with a copy paste of the troubleshooting page.
  All devices are on the same network.

  All devices have home sharing enabled.

  All devices use the same account for sharing and itunes.
  I restarted the router.

  iTunes is open on both computers all the time.
  I restarted the devices in all possible orders.

  Now, I thought the appleTV was not only interact with other computers, but I can't airplay on both computers to the AppleTV.
  Now, at first I thought that the ATV was just streaming on the internet and not in fact the computer, so I forced to through the option 'Read iTunes in the cloud' Airplay (I have set Auto Off). AirPlay works always.

  So, which leads me to conclude that it can interact with computers, but simply refuses to acknowledge their library for roommate for some reason any.

  Anyone had this problem before?
  Any help is appreciated. Thank you

  I have long had a similar problem.  In my case, I have an Apple TV 2.

  Part of the answer is to turn off home sharing, and then turn it on.  This should be repeated every time that you restart your computer.  Although home sharing is on when you last use of the computer, and all the things to check indicates that it is already on, it's not.

  That's how it worked in El Capitan 10.11.5.  I reported it as a bug.  It seemed that it would be fixed.  It has been changed, but not fixed.

  In El Capitan 10.11.6, it may or may not be necessary to turn off sharing at home, and then back on it, that it.  Sometimes it works when the computer reboots, sometimes not.  The problem since the release of 10.11.6, is that when the albums that are in the shared House are shown, the images are not.

  On my system, it's completely reproducible.  I have reported as a bug.

  Note that I refer to release builds.  I'm reporting the bugs with the systems put in place for beta testing, but these problems are in the release version.