My Celler mass storage device will not work on Windows 7

Similar Questions

• Mass storage device is not recognized in Windows 7 (x 86 and x 64)

  My mass storage device has been recognized in Windows 7 before with pilot USBSTOR. SYS (ver 6.1.7600.16385). However, it is not recognized more with the new driver USBSTOR. SYS (ver. 6.1.7601.17577)

  My mass storage device can be recognized by Windows Vista (x 86) as a removable disk (FAT file system).

  Y at - it a fix for this problem for Windows 7?

  Thank you.

  Allen

  Sorry I've updated my question that the current VER is 6.1.7601.17577 and it does not see my mass storage device which is a feature of WinCE 5.0 in charge of priming mode.

  The previous version 6.1.7600.16385 works well because I have a test PC Win7 did not install all updates.

• Message "USB Mass Storage Device does not work properly"

  Ran AVG PC tune up and referred the problem message "USB storage device work does not correctly. I went to Device Manager, clicked on "bus USB controllers. He showed the device with a yellow exclamation point USB mass storage. I have double clicked on it, went to the drivers and updated the driver. I received a message that the driver was already updated and got a message "device cannot start (code 10).»

  I thought that maybe he was looking for the storage device of mass external and plugged on the USB port. He has shown in the Device Manager under the other mass storage device but had no yellow exclamation point (I guess that means it's very good).

  Is there an internal procedure and what can I do about this problem? My development program, said that this mistake could cause my computer crashes often or he can go for a long time without replying (which it does).

  Hate to be chatty but I wanted to present all the facts.

  Can someone please help me get this figured out? Thank you in advance.

  Hello Sammy,.

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause and to check the health of your system, to solve the problem permanently.

  Microsoft does not recommend using third party software melody. That running these software can damage records.

  For the problem with the error code 10, I would ask you to try the steps below:

  A Code 10 error is generated in the Device Manager in one of the following situations:

  1. Device Manager cannot start the device.
  2. One of the pilots who needs the unit does not start.
  3. The Device Manager has insufficient information to recognize the error that spread upwards by the device driver.

  Note: In this case, the Code 10 error can be a very generic message indicating some sort of unspecified driver or device problem.

  Error Code 10 is mainly related to devices and hardware driver problems or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues.

  I suggest you to follow the steps described in the following Microsoft article and see if it works for you.

  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Some software will not work on Windows Vista

  Some software will not work on Windows Vista so I need to install Windows XP
  But how to download drivers for devices such as bluetooth, Lan, his...

  Hello

  I put t know what phone you use, but many Toshiba notebook series are delivered and support similar hardware parts.
  You can simply try to test and install the drivers from different series.

  The new Toshiba Bluetooth stack supports Vista and you can install it on all the laptops Toshiba which supports the feature of BT.
  Sometimes, you will get the chip card driver LAN or compatible Sound on the site of manufacture of chips like Intel, realtek, etc.

• Direct3D devices does not work on Windows XP

  Direct3D devices does not work on Windows XP

  Hello
  1. what exactly happens when you try to access Direct3d devices?
  2. you get any error message?
  3. If it works well before?
  4. don't you make changes to the computer until the problem occurred?
   
  I suggest you to follow the steps below and check if it helps:
  
  Method 1: Try to uninstall and reinstall the Direct X on Windows XP:
  Here's how:
  a. open the registry editor by running Regedit from start > run.
  b. then, navigate to the following registry key.
  HKEY_LOCAL_MACHINE\Software\Microsoft\DirectX
  c. here, delete the DirectX folder, exit the registry editor and restart your computer XP.
  d. when starting the system, after the reboot, your system will be reinstall DirectX 8.1 which is originally preinstalled Windows XP operating system.
  Once it is done the upgrade to x 9 live.
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=2DA43D38-DB71-4C1B-BC6A-9B6652CD92A3&displaylang=en
   
  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
   
  Method 2: If the problem persists, then try to install the latest graphics driver from the link below.
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;179113
   
   
  Hope this information is useful.

• Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  It is the responsibility of the manufacturer of the device to provide device drivers that allow the device works in an operating system. You will need to contact the manufacturer of the device for info and software.

• HP LaserJet 1015 printer will not work on Windows 8

  I have a HP LaserJet 1015 printer will not work.  Used with Windows 7 and it works very well, it will not work with Windows 8. Nothing came out.  I used all the devices, coil, etc that they had and was able to find.

  You can download the latest drivers from the following link for Windows 8:

  »	Microsoft Windows 8 (32-bit)
  	»	Microsoft Windows 8 (64-bit)

• I have a belkin f5d7050 will not work with windows 7

  I have a belkin f5d7050 and it will not work with windows 7 someone at - there a way for me to solve this problem?

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• FS2004 will not work on windows 7

  FS2004 will not work on windows 7

  Read this post: http://answers.microsoft.com/en-us/windows/forum/windows_other-gaming/compatibility-microsoft-flight-simulator-2004-vs/798930b1-0c2c-49b2-bd2a-488b9e670a8f?auth=1

  And this information from Microsoft support: https://support.microsoft.com/en-us/kb/837195

  Also:

  Make older programs in this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Learn how to use the Mode of Windows 7 compatibility with legacy applications
  http://Lifehacker.com/5466628/learn-to-use-Windows-7s-compatibility-mode-with-older-apps

  Using Windows 7 or Vista Compatibility Mode
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  Also: http://www.sevenforums.com/tutorials/1196-internet-explorer-compatibility-view-turn-off.html

  J W Stuart: http://www.pagestart.com

• Canon CanoScan FB 630U will not work with Windows 7 64 bit

  CanoScan FB 630U will not work with Windows 7 (64-bit).  I need a driver that will make it compatible with my system.

  Unfortunately, there is no native 64-bit of Windows 7 available driver for your printer.

  You will need to consider investing in new hardware to print.

• Home surveillance camera kit, that will not work on Windows 7 OS. I have the following message: "DVR installation may not complete. Ox00000222 error code.

  I bought a home surveillance camera kit, that will not work on Windows 7 OS.

  I have the following message: "DVR installation may not complete. Ox00000222 error code.
  I really need to get this working on my computer. Can anyone help please?

  Contact the manufacturer of the camera to get their installed software.

• Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Downloaded the patch for an extension of game / will not work because windows cannot find ' RTR - patcher.bat

  Original title: rtr - patcher.bat

  Brian

  You need to contact the developer of the game, because they are the only one who can help you.  We support Microsoft software & hardware here.

• My external storage devices do not work.

  My laptop is running Windows 8 pro 64-bit version.

  Whenever I connect an external hard drive or USB key, it is not detected. I went to the Device Manager, it he showed that there is an error with the usb mass storage device. I checked and it shows the error 38 "code, an instance of the driver is already loaded into memory. Then when I restart my pc, it works fine, but once again the problem returns. I was faced this problem for about a week now.
  Is there a solution for this. Please help me out here.

  Hi Julie,.

  The driver could not be loaded because a previous instance is still loaded

  I suggest you run the hardware and devices Troubleshooter to check. This should solve the problem of equipment.

  Follow these steps to run the hardware and devices troubleshooter.

  a. press the Windows key + W and type Troubleshooting.

  b. Select Troubleshooting.

  c. Select show all in the upper left corner.

  d. run the convenience store hardware and devices.

  You can also use the Troubleshooting Wizard to solve the problem.

  a. in the device properties dialog box, click the general tab.

  b. click troubleshoot to start the Troubleshooting Wizard. The wizard will ask a few simple questions and provides a solution to your problem, based on the answers you provide.

  c. follow the resolution steps provided by the wizard to resolve the problem.

  Then, restart the computer.

  Reference:

  What happens if a device is not installed correctly?

  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  Let us know the status of the issue. We would be happy to help you.

• Passport Mass Storage Device does not appear to the top, when I plugged in the USB Port on Windows XP

  I have connected my passport mass storage device to a USB port and it notifies as new hardware, but it did not show in my computer anywhere. However, I installed and uninstalled several times my computer.

  Hello

  1. what happens when you plug the device to your computer, you get an error message?

  2. don't you make changes to the computer until the problem occurred?

  I suggest you try the steps mentioned below and check if it helps.

  Method 1:

   Try to connect the Passport mass storage device into the other USB port or try to connect the Passport mass storage device in another computer and verify that the problem persists.

  Method 2: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 3: Also try to follow the steps from the link below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  Hope this information is useful.

• Re: NB550D - 'No mass storage devices' during the installation of Windows

  Hello!

  I recently bought a laptop Toshiba NB550D. It goes with Windows 7 Starter. So I decided to change the operating system, I want XP Pro or Windows 7 Edition Home Premium. Because the laptop is not a CD/DVD drive, I looked on the net for Windows USB installation.

  Problem is that when I install the USB, with regard to the partitions, it says I have no mass storage devices. I tried with XP and Home Premium, used 2 different programs to make bootable USB (WinSetupFromUSB and WinToFlash) and I tried with 3 different USBs to be sure that the problem is not of them. Both seem to do the job, but it still says I have no mass storage devices. I read on this forum, found [how to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm] thread. I tried this, make an ISO with the built-in driver, made an another bootable USB key with it, but still, when I reached the partitions, they seem to be missing.

  I checked if the partitions will show if I start installing Windows directly from the Explorer to the laptop and partitions are then normally, so it seems that the problem only occurs when you try to install from a USB. But I want a * install own bootable *. I have no CD/DVD lens, so this isn't an option more.

  I'm really out of options on the left, tried everything I thought, it seems that I'm not the only one having this problem, but found no solution to it. Even if I put up with the Starter (even if I don't like), the HARD disk is separated into 2 partitions the two 116GB which is also very annoying.

  I'd appreciate any help! Thanks in advance!

  P.S. I also installed the latest drivers, BIOS seems to be too, but still did not help.

  Hey,.

  Which AHCI driver, I joined?

  Article you found how is just an example and is written for models with Intel chipset. I checked the NB550D specifications and this model has chipset AMD A50M, so you need another driver and the Intel driver will not work.

  So if you are looking for Toshiba NB550D European driver download page, you will see a driver called AHCI driver. This package contains the correct AHCI driver, but the problem is e for Windows 7 only. For obsolete XP it will not designed more pilots and that AMD is brand new. There is no old drivers.

  If you want to only Windows 7 Home Premium that s no problem. Therefore, you can use the mentioned AHCI driver. For example, to create a new Windows 7 bootable USB key with this driver and installation should work fine. :)