My charger broke out a week after I got it

Similar Questions

• Recently, I went to the Apple Store in Easton, because I broke my screen. After that I got my fixed screen it worked for a little while but now it does not meet my contact

  Recently, I went to the Apple Store in Easton, because I broke my screen. After I got my fixed screen, it worked for a little while but now it does not meet my contact, Apple is responsible for this and how do I get my screen works again?

  Take it back to the Apple Store. Repairs made by Apple retail stores are still covered by the warranty.

• How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  How can I stop technotronic tv ranging from vga to out of reach after windows has loaded?

  VGA Out of range usually means that the display resolution is not properly set for television "limited."  Demarrer start in safe mode, and then set the resolution to a lower setting.

• Audio goes out of sync after export (PP CS3)

  Hey there!

  So I had a few problems with first Pro CS3. My main problem is with the audio goes gradually out of sync after export. I am trying to export in 1440 p (2560 x 1440). I export in h.264 with 60 images/s.

  1. Original file type: AVI
  2. Original Frame height and width: 1680 968
  3. Original Audio bitrate: 1411 kbps
  4. Original Audio sampling rate: 44 kHz
  5. Original frame rate: 60 fps
     Data rate: 1191254 kbps
  6. Total bitrate: 1192665 kbps

  Before installation:

  

  Can someone help me and tell me what are the audio settings I should export in correlate with 1440 p and 60 frames per second? Any help is much appreciated, and I look forward to your responses.

  Much appreciation,

  -David

  What codec is used in this avi (as it isn't a regular avi of a camera) and if the framerate is variable, you need to convert to constant framerate before importing it in first.

  Converter for example Handbrake.

  Bit rate may be too high. Don't forget that CS3 is pretty old.

• Audio out of sync after importation. MOV

  Audio issues out-of-sync after you import a clip .mov in Premiere Pro.

  The .mov video the problem doesn't have a problem when played with quicktime or vlc: audio fits perfectly with the video.

  Adobe Premiere Pro 7.2.1 CC (4) on OSX 10.9.1

  Open the first new project... > OK > import the single video clip (either by dragging in the app, or by using the media browser). Start to play the clip in the Source monitor, rub with impatience. Result: audio and video are way out of sync.

  Clip .mov, the origin of the problem has been exported to the Silverback app.  http://silverbackapp.com/

  Details on the clip .mov, via Media Inspector app:

  ============================================================

  General

  Full name: /Users/jukeboxhero/20140203.mov

  Format: MPEG-4

  Profile format: QuickTime

  Codec ID: qt

  File size: 638 MiB

  Duration: 34 min 46 s

  Overall bitrate: 2 566 Kbps

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-06-02 15:55:40

  Library: Apple QuickTime

  Video

  ID                               : 2

  Format: AVC

  Format/Info: Advanced Video Codec

  Format profile: [email protected]

  Parameters of the format, CABAC: No.

  Parameters of the format, Reframes: 2 images

  Parameters of the format, GOP: M = 2, N = 30

  Codec ID: avc1

  Identifier of the codec/Info: Advanced Video Coding

  Duration: 34 min 46 s

  Bit rate mode: Variable

  Bitrate: 2 449 Kbps

  Width: 1 920 pixels

  Height: 1 080 pixels

  View picture format: 16:9

  Frame rate mode: Variable

  Rate: 18,969 fps

  Minimum frame rate: 6,522 fps

  Maximum frame rate: 19,355 fps

  Color space: YUV

  The chroma subsampling: 4:2:0

  Color depth: 8 bit

  Scan type: Progressive

  /(pixel*Frame) bits: 0.062

  Stream size: 609 m (95%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:46

  Marking date: UTC 2014-02-04 15:27:35

  Primaries: BT.709 - 5, BT.1361, IEC 61966-2-4, SMPTE RP177

  Transfer characteristics: BT.709 - 5, BT.1361

  The matrix coefficients: BT.709 - 5, BT.1361, IEC 61966-2-4 709, SMPTE RP177

  Audio

  ID                               : 1

  Format: AAC

  Format/Info: Advanced Audio Codec

  Format profile: LC

  Codec ID: 40

  Duration: 34 min 45s

  Bit rate mode: Constant

  Bit rate: 104 Kbps

  Nominal flow rate: 128 Kbps

  Channels: 2 channels

  Position of the channels: Front: L R

  Sampling frequency: 44.1 KHz

  Compression mode: lossy

  Stream size: 25.9 m (4%)

  Language: English

  Encoding date: UTC 2014-02-04 06:52:45

  Marking date: UTC 2014-02-04 15:27:35

  ============================================================

  The video matter perfectly in Final Cut Pro 10.1.1

  I have Premiere Pro of the trial and the Final Cut Pro trial. If there is no fix or get around easily, I have to give up the first.

  > Frame rate mode: Variable

  No version of first does 'good' with Variable rate

  Below is on iphone, but can help

  Some people find that the Iphone will not edit easily because it uses a variable rate

  -A possible solution in the message #22 http://forums.adobe.com/thread/934466

• Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud ,

  Hi all, I have 5 LR I purchased with a serial number and a week ago I got the message about a new update, I want to get LR 6 but not the creative cloud, LR4 LR5 to last time it was just an update without having to buy the creative cloud is it possible to LR5 LR6 to? Thank you very much.

  Jeffrey

  Yes, you can buy Lightroom without subscribing to Adobe Creative Cloud.

  To purchase an upgrade to Lightroom 6 from a previous version, please see this link: products .  Scroll to lightroom and click 'buy '. Then click on the selectable text next to "I want to:" and select "upgrade". In the drop-down list, select the version that you are upgrading.  I hope that help.

  Best regards

  Guinot

• Bought AE 2015 CC, but says my trial ran out, despite only after having been a week

  I recently purchased After Effects CC earlier this week and it worked fine until at least Friday, but since I tried to update my PC (Windows 64-bit 8.1) he said that my trial has expired on After Effects, and when I try to open one of my projects a verification window software license , which then closes and opens again several times until I have stop. I made many of the troubleshooting steps that Adobe has listed, but nothing helped. I want to get this resolved quickly, so that I can continue my work.

  Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

• New VM broke out after the snapshot has been taken

  I just created a new Linux Debian 500 VM, I started and took a snapshot of the current state, until I installed VMware tools.  In the middle of the snapshot and once completed the virtual machine in gray and stop and wouldn't start up.  I also tried to get around by creating a new virtual machine and using its virtual disk already existing and not worked, made a mistake of locking file.   Attached are some of my log files.  Thank you for your help in advance.

  This disk must have a corresponding vmdk file that is needed.  Otherwise, this file will not be read by the virtual machine and can not be used.  I thought that was missing before, that's why I had you create a new drive of the same size, so you can reuse this other file descriptor to go with this - flat.vmdk file.  Who is?

  -KjB

  VMware vExpert

• For the last few weeks, after that I closed 19.0 FF, I can't open it. I resorted to having to re - install FF each time so that it can open. What should do?

  For the last few weeks, whenever I close Firefox 18 (and more recently 19.0), I can't reopen the browser again. The application runs as if it is going to open, then stops and sits there. I had to resort to the re - install the browser every time now, very irritating. He remembers my tabs as they had been, that I want to. I used to open up to 40-50 tabs, but now made an effort to keep them below 20, thinking that it would help work more optimally. I'm tired of re - install the browser all the time. What should I do? Thank you

  When this happens, check the Windows Task Manager to see if there is a hidden window or the firefox.exe process is at a standstill?

  To open the Windows Task Manager, press Ctrl + Shift + Esc

  On the Applications tab, look for any window with the icon of Firefox. See something wrong here? In another thread, users have reported finding what seems to be a rogue process. If you find something, try to select and killing using end task.

  Under the processes tab, look for firefox.exe. According to the displayed columns, you can often see that the program is reading, writing, communicate or simply sitting there, doing nothing. If you have allowed time to stop Firefox and it crashes, you can select firefox.exe and click on end process.

  After that, Firefox expected to start normally.

  Please see this article for troubleshooting suggestions for when Firefox crashes out. https://support.Mozilla.org/en-us/KB/Firefox-hangs-or-not-responding#w_firefox-hangs-when-you-quit-it

  A little luck?

• Satellite L100-179: 2-3 weeks after recovering sound interruptions and performance drop down

  I bought a new L100-179 for my daughter for school. It worked fine out of the box, but after 2 weeks, he was so full of adware (from kazaa) that spybot/adaware teacher could not clean everything off. He could not play sound properly windows sounds or music through Media Player, iTunes or other and happened to be dog slow, taking forever to do anything. So I wiped with reinstall drive and everything was good again.

  The only things we loaded were the driver for the card netgear wireless, spybot + teacher adaware and MS Word.
  I also configured Norton Internet Security which is preinstalled.

  Everything was good for another few weeks, but then the same problem is back, same symptoms - heavly sound interruption, including the sounds of windows startup/exit and the laptop had an age to do anything - it seems to take 90% cpu for a long time to perform ordinary tasks such as opening a session same Explorer.

  I ran the anti virus, spybot, adaware pograms, I defragmented the hard drive, I have experienced wth the performance in the Control Panel/System/advanced parameters such as the virtual memory settings, but nothing brought no improvement.

  I sat and looked at the processes that are using most of the cpu and it was no matter what app I chose to run or Norton IS components. Everything seems normal, but takes forever to do the simplest things, and he could not play the sounds/music cleanly again.

  I had no choice but to wipe again using the recovery as well as before minimum programs cd.
  Hey hop - all works fine again, sound is normal and things take a reasonable time to do so - this excludes a hardware problem?
  This time we uninstalled Norton Internet Security in the case who was to blame. (application of cpu very hungry)

  This lasted 3 weeks before is exactly the same thing - she did bother load the mp3 files on this time, does not load any application or update all the drivers it just used to run word, playing music through WMP and MSN Messenger friends.
  Anti-adware programs reported all was clean, I've updated the BIOS, then his driver of Toshiba, defragmented the hard drive barely used and looked like a bunch of other parameters, but once again nothing it improves until wipe us the disc and reload from the recovery disk!

  We now only loaded the map without thread, MSWord, iTunes and MSN messenger and it has been fine all over Christmas, but we know it won't last long until he must recover again.

  I've seen others report the same problem on this forum, but not a solution that works for me.

  We have 5 laptops in the House and it's the only list this problem.

  Any ideas guys?

  Hello

  If the CPU is forced to run at high level did you check which process is responsible for this? For the moment, I sometimes have the same problem with iexplore.exe. From time to time CPU is permanent on 100% usage and just if I kill this process manually the laptop works well again.

  In general, I noticed that Symantec Norton products need a lot of resources of the laptop and the first thing I did on my Toshiba is to remove it. I recommend you do the same thing after the next recovery procedure. How to do this you can see under http://support.toshiba-tro.de/kb0/TSB6B01NM000ER01.htm

  I can't imagine that there may be another problem. By the way L-series is laptop budget and you can't expect a perfect performance, but for every day use, the device is pretty good. Try to set it up without any applications that need a lot of resources and slow CPU activity.

  I'm sure you have many experiences for laptop and you will understand what I mean. ;)

• E250 SanDisk 2 GB MP3 Player - broke before two weeks, please help!

  Well, I enjoyed my e250 player renovated for about the first 10 days, but tonight it's dead.  Here is what happened.

  I was transferring some new music for the reader of my laptop.  After that I made and unplugged, I checked the player to make sure that all transferred correctly.  He said that nothing was there, no music at all the...  Well, I had not much there, so no BIG deal, I just start from scratch and put music on it again.

  When I reconnected it, or tried, to the laptop, suddenly the Sandisk flash the introduction screen, white titles on black background, but would never go beyond this, would never load.  Later even if it stopped, and now I have a blue wheel on and cannot get the thing to turn on at all.  If I connect it to the laptop, the laptop does not recognize it at all.  I guess even the lighted wheel will turn off soon, when the battery dies.

  What can I do?

  I this would come back to where I bought it, but it takes all the original packaging, which I threw it out after that everything worked fine for a week...

  Any help appreciated, because I really want to fix!

  Ouch!

  In retrospect, don't forget to keep your original packaging and received with any new device, at least for the first 30 days.  I would contact the seller, because they may be able to make an exchange for you.

  The key here is to present your case and to maintain a civil tone, despite the obvious frustration, as friendly conversation will often do the trick.

  If the unit will respond to the recovery mode, you can get to the top and running or the next step, e200tool.

  Read the thread "blue ring death" for more information.  I would try to Exchange everything first, as a few days.

  Bob

• IM lock out forgotten password after power on

  I'm locked out of my ipad after update please help sue

  Click here and follow the instructions.

  (143784)

• Sony Walkman D-don't 241 broke out, got a new identical but now the front lower average volume

  My grandmother bought a reader of CD Walkman Sony D-NE241 less than two years who has worked flawlessly until it broke. He has been replaced by an identical device that plays very well the CD, but the volume is very low. Even at the highest volume possible, it is average lower on the previous unit. Is this a known issue? My father suggested it might be a law which forbade the loud CD player that could be takrn into force after the first unit was purchased.

  Hello Magnus,

  It may be possible that the AVLS (automatic Volume limiter system) of the Walkman player is activated. The AVLS function limits the maximum volume level in order to protect listeners hearing. The default setting for the AVLS function is turned on and displayed on the LCD when the volume has reached the maximum level allowed by the AVLS function.

  Sony D-NE241 is not sold in North America. You can contact Sony support in your country for more information on the functions available in the CD Walkman player and for known problems.

  For your comfort the support pages for your Walkman player can be found here.

  http://www.Sony.dk/support/da/product/D-NE241

  If my post answered your question, please mark it as an "accepted Solution".

• HP G6-2304AU - keyboard does not not two weeks after purchase.

  Hi all
  Looking for a few hep on something that made me absolutely perplexed. I bought a HP Pavillion 2304AU G6, Win8 running, two weeks ago and since I bought the keyboard cut in and out on random intervals, even had some problems with the touchpad - no problem with the touchpad while more.
  The keyboard now completely cut off and has since a few days now - I've done a good amount of troubleshooting but I can't seem to fix. NONE of the keys work, except for the function keys (F1 to F12), but esc, del, etc. which are also on the top of the keyboard do not work.
  I did the following:
  Restart the computer.
  Uninstalled and reinstalled the driver as found on the HP site.
  Did a reset, FULL of Windows 8.
  Tried in safe mode, nothing helps.

  The keys do not work in the BIOS.

  I start University Monday and really hope I can fix this problem before this date :/

  Thanks for all your help in advance,

  Jordan

  If it does not work in the BIOS or Safe Mode, the keyboard is already defective.

  Go back to where you bought it from and exchange it for a new laptop if you can, otherwise contact HP and put in place a claim under warranty.

  In the meantime, you can use the onscreen keyboard.

  With out of control (I'm on W7 machine now)

  Open the window of the aps, right click and a button will appear at the bottom right of the screen _ all the aps.

  Click on that and find Accessories > accessibility > on screen keyboard.

  EDIT: On screen key board is simply in the window of "all points".

• Windows 7 laptop restarting after being out of hibernation after Windows Update

  A Windows 7 laptop is force a restart after coming out of hibernation when Windows Update is scheduled to run during the time, he was in hibernation. The user doesn't have a choice, even if theNoAutoRebootWithLoggedOnUsers option on windows update registry key is set to 1.

  Is - this intentional? Are what solutions there?

  Thank you

  A

  Hello

  This problem occurred for many users.

  See this link for a possible solution-
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/7353bcf5-4d1b-4657-aac5-84da5f8988d9