my computer became very slow, but it shows no virus. Videos don't is not good and updated loading in service is very slow?

My computer became very slow and takes forever to start up. I ran a diognostic on it and he registered all those sites that open at startup, but I don't know which I need and those who didn't. In addition, do not load my videos, they stop and start!

Hello

1 are there any changes made recently to the computer?

2. What is the security software installed on the computer?

3. What are the steps that you have already tried?

Follow the steps in this article.

Optimize Windows Vista for better performance: http://windows.microsoft.com/en-US/windows-vista/Optimize-Windows-Vista-for-better-performance

Try to set up your computer in a clean boot state, and check if the same issue occurs

By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem. 

How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135

Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

I hope this helps.

Tags: Windows

Similar Questions

  • My computer became very slow (startup takes a huge time and even my internet browser takes too long to load.

    Original title: slow down the computer

    Hello world

    I am running a Win7 on an hp w1858 pavilion. My computer became very slow (startup takes a huge time and even my internet browser takes too long to load. I use Google Chrome btw)

    I also have Norton Security Suite via Comcast which shows that my system is clean, so I don't really know what the problem is. I would be grateful :) all tips thank you

    Yes svchost.exe is eating all your cpu about

    Cause the most common was that the windows update system stuck

    Please go to start and Panel and Windows updates

    On the top left click on change settings update.

    Switch to never look for updates,

    After the above, restart your machine.

    After reboot see if these updates are installed if not install it.

    KB3161664 main download page

    https://TechNet.Microsoft.com/library/security/MS16-073

    Win 7 32 bit

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=52823

    Win 7 64 bit

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=52794

    Same deal with it if it is not already installed

    Main download page,

    https://support.Microsoft.com/en-us/KB/3161608

    Win-7 32-bit

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=52976

    Win-7 64-bit

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=52974

    Once the two of them are installed,

    Change your settings to update them and manually check the updates, if this is not after the passage of the parameters and save the changes.

  • I have a monthly subscription to Adobe Revel. You received my payment for September 15, 2015 & October 15, 2015 according to Adobe, but Revel shows that I have only a free basic account and that it was yet another payment. What is happening on h

    I have a monthly subscription to Adobe Revel. You received my payment for September 15, 2015 & October 15, 2015 according to Adobe, but Revel shows that I have only a free basic account and that it was yet another payment. What happens here? You people need get the bugs out of your cloud services. I signed up with [email protected] that the Adobe Revel server fails to allow me to login, but accounts Adobe server connects me and says I am free on my subscription to Revel. Is happening here? I canceled once on this issue! Want to lose me again, this time for good? I'm telling you guys, I buy recently bought items 13 (of course just before you've released 14) on CD-ROM, because your cloud suck the Revel program! Sincerely, [email protected] and this is the email only I use.

    I did some research and your account indeed shows you paid AND that the subscription has expired (which is false!). We experience the Adobe Store people to examine it.

    Please accept our apologies and you are good to go now. You've been comped for the year.

    Kind regards

    Glenyse

  • I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to sign

    I signed up for the basic acrobat reader conversion program, but he won't let me not convert PDF to Word.  I looked at troubleshooting tips and how advice but after I connect it just says this is not supported and directs me back to register for the conversion program.  I would rather talk to someone, but I can't find a phone number or the option for a cat.  I have a PC.  Any help would be appreciated.

    Hi dianar30180588,

    Try to use the service to export to PDF Online https://cloud.acrobat.com/exportpdf

    Kind regards
    Nicos

  • If I have my firewall is turned on but no antivirus I virus even if I'm not surf the internet, and no browser opens?

    original title: Internet security

    1. If I have my firewall is turned on but no antivirus, will I get virus even if I'm not surf the internet, and no browser opens? Will I receive a virus when Windows Gets the automatic updates or when my installations are updates and checks online?

    2. Microsoft Security Essentials is enough without using any other antivirus?

    Thank you.

    (1) Yes, viruses could just enter in your PC by inserting removable media that is infected. Firewall you help, but does not fully protect you. You must have anti-virus protection and the virus went wrong and it could be a very small misateke in the second causing a great nuisance in your PC.

    (2) Yes, Microsoft Security Essentials is a solution Anti-Malware and Anti-Spyware full and you don't need anything else. And you must NOT use other protection in real time or with Microsoft Security Essentials anti-virus.

  • I've just upgraded my pc to windows 7. I tried to install my copy of vista on another pc, but I'm told that the validation key is not good. Do I need a new key?

    need a new key for installation to install my old copy of vista on a new computer. I upgraded windows 7 which was the copy of vista on the pc

    And if your copy of Vista was preinstalled on your old computer, it is classified as an OEM license is not transferable.

    The license of Vista OEM is related to the original computer it is installed on and dies with the computer.
    You cannot transfer it to another computer/laptop.

    You can transfer a license of Vista to retail, not an OEM license.

    See you soon. Mick Murphy - Microsoft partner

  • No audio audio on computer. Fix Center indicates the problem, my audio doesn't work does not sound and manufacturer-both required

    I have an acer CPU. I might delete something that caused audio does not run correctly, but not sound. Speakers are plugged.

    Install the audio for the brand device drivers and the computer audio device model you have.

    (Without device drivers, the operating system has no idea how to talk to the audio device * and * vice versa.)  We can speak English, the other Swahili.  If no member of the House can translate, then you get just a lot of weird looks.)

  • LINKSYS WRP400: Voice recorded but the number doesn't work don't no (not in service) (no SIP response)

    Hello everyone,

    I have a weird and frustrating problem with some Linksys WRP400 and I hope you can give me advice.

    Long story short: the voice on the WRP400 line keeps stop working, even if it is registered on my SIP PBX. Only a reboot of the router or a stop put on the line temporarily fix the issue.

    Let's add some details: I had a lot of WRP400 installed and running, and not all of them have this problem. They all have the same configuration.

    I tried to work around the problem, reducing registry expires 3600 to 1200, defining to call without Reg and years call without Reg, setting on restrict the IP Source address and reset daily at 05:00. It doesn't seem to help.

    When the problem occurs, if I call the voice line number I get an error "the number you have dialed is not in service" or similar. Sometimes my clients said they can make an outgoing call, while the problem is still on, but more often, the line is totally silent on the outbound road.

    On my SIP PBX, I see that the number is regularly recorded, with the right timing.

    If I do a sniff of Wireshark on my SIP PBX, I see some regular "ask: INVITE sip:[email protected]/ * /: 5060; transport = udp, with description of session' a PBX to the router but the router never answers.

    If I reboot, the vocal line to re-register and start working again.

    I have attached a screenshot and the Wireshark Sniffer.

    I use the 2.00.32 latest firmware.

    You have any advice? It becomes an annoying problem and I am groping in the dark.

    Best regards

    Maurizio

    PS: Should I I asked Belkin or is it always in the right place?

    ---

    http://about.me/mauriziotroilo

    Hi, we use the WRP400 of the years and the voice module has always been problematic.

    I have a theory on this problem: I think that the safety function to "Restrict the IP Source address" crashes after a few hours of regular work and it filters all incoming SIP messages.

    You can confirm this idea by turning on the trace of the sip. In my case the trace shows all SIP entering until the reboot request.

    Can I ask you how many CPES you have?

    What is the frequency of this problem?

    In our network, we have about 2000 installed platform and we must restart on unit 2-3 per day.

    Kind regards.

  • Photoshop CC 2015 "Installation successful but not patch ' and 'update failed '.

    I had photoshop cc 2014 up to a 2-3 days there and it worked perfectly well and then I updated to 2015 and it would break at the start screen, accordingly I tried everything I could to fix (instructions of the personnel on a separate thread) and nothing worked so I uninstalled and reinstalled one last time and since ive then got this message , I just looked before posting and now it says cancel, but I do not cancel

    If you wish you can try launching the account administrator hidden :

    Follow the procedure below and activate the hidden administrator account and try running Photoshop CC 2015

    Click the Start button and go to the menu Windows tiles.

    Type as CMD, it will command line option list in the search results.

    Important: right-click on "Command prompt" Options and select "Run as Administrator".


    It will open the command prompt in elevated mode window.

    Step 2)

    Now copy command below can do a right-click on the black prompt screen window, select the paste option and press the Enter key.

    NET user administrator / Active: Yes

    You should see a message that the command completed successfully.

    Step 3)

    Restart the computer and the connection to the user account named ' administrator' and then try to launch the app Photoshop CC 2015.

    Always the same?

    Stay on the hidden administrator account and then uninstall and reinstall Photoshop CC 2015 and launch the app and check.

  • I tried to download PES 13 on my new Mac, but he tells me that the serial number is not good.

    I bought this download of Adobe a year ago, it was an upgrade to a Windows Machine.  Should what number I use?

    If you have purchased an upgrade you should probably the serial number of the previous version that you upgraded and that of version 13.  What is the message you see when you try and it breaks down?

  • Computer is very slow and crashes off is not Windows 7 correctly.

    Yesterday, my computer froze to the point of pull me the plug on my laptop. After him have enabled again, I noticed that my computer became very slow. I tried to browse the web with Google Chrome and it takes forever just to get a loaded page. The Shockwave Flash plug accident frequently and whenever I try to browse a web page that uses Java, it hangs for a few minutes and continues to load slowly.

    Chrome is not the only program that runs slowly. All other programs seems to freeze/being slow. I have the MSI CX640 with: 4 GB of ram, Nvidia Geforce 520 M 1 GB, Intel Core i3 - 2310 M 2.1 GHz, Windows 7 Home Premium 64-bit.

    I had a look at the event logs and found a few warnings and errors:

    The driver failed to load the ACPI\ACPI0008\2 device \Driver\WUDFRd & daba3ff & 2.

    Log name: System

    Source: Kernel-PnP

    Level: WARNING
    Event ID: 219
    ___________________________________________________________________________________________________________
    Custom dynamic link libraries are loaded for each application. The system administrator should review the list of libraries to ensure that they are linked to trusted applications.
    Log name: System

    Source: Wininit

    Level: WARNING
    Event ID: 11
    ___________________________________________________________
    Windows Windows (5352): an application to write to the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 70025216 (0x00000000042c8000) to 32768 bytes (0 x 00008000) succeeded, but took an abnormally long time (91 seconds) is served by the operating system. In addition, 18 other requests to this file I/o also took an abnormally long time to be repaired since the last post regarding this issue has been sent 30 seconds ago. This problem is probably due to a defective material. For further assistance diagnosing the problem, contact your hardware vendor.
    Log name: Application
    Source: ESENT
    Level: WARNING
    Event ID: 510
    _____________________________________________________--
    Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.
    DETAIL-
    Register User 8 handles is escaped from \Registry\User\S-1-5-21-1019584894-1960917297-2461571163-1001:
    Process of 2480 (\Device\HarddiskVolume3\Program files (x86)\Steam\Steam.exe) has opened \registry\user\s-1-5-21-1019584894-1960917297-2461571163-1001-cles
    Process of 2480 (\Device\HarddiskVolume3\Program files (x86)\Steam\Steam.exe) has opened \registry\user\s-1-5-21-1019584894-1960917297-2461571163-1001-cles
    2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Intel\Display\igfxcui\3D key
    2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\UserAssist\{CEBFF5CD-ACE2-4F4F-9178-9926F41749EA}\Count key
    2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer key
    2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows NT\CurrentVersion key
    2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts key
    2480 process (files \Device\HarddiskVolume3\Program (x86)\Steam\Steam.exe) has opened the \REGISTRY\USER\S-1-5-21-1019584894-1960917297-2461571163-1001\Software\Microsoft\Windows\CurrentVersion\Explorer\UserAssist\{F4E57C4B-2036-45F0-A9AB-443BCFE33D9F}\Count key

    Log name: Application
    Source: User profile Service
    Event ID: 1530
    Level: WARNING
    It took me about an hour and a hlf to type this message as several programs open at the same time causes the constant freezing. CPU utilization remains low and less than 50% of the total RAM is used. I tried to use Timestamp (version MSI system recovery), but the previous backups have been deleted, and I tried to use the system recovery which has a windows installation, but fails in the process. I don't know if these event logs means nothing at all. I would like to help with this issue as it did my computer almost unusable.

    Hello Jleester,

    The warning of error IO error can be caused by a defective hardware:

    Windows Windows (5352): an application to write to the file "C:\ProgramData\Microsoft\Search\Data\Applications\Windows\Windows.edb" at offset 70025216 (0x00000000042c8000) to 32768 bytes (0 x 00008000) succeeded, but took an abnormally long time (91 seconds) is served by the operating system. In addition, 18 other requests to this file I/o also took an abnormally long time to be repaired since the last post regarding this issue has been sent 30 seconds ago. This problem is probably due to a defective hardware

    I would check with the manufacturer of your computer to see if there is diagnostic tests that can be run on your hardware.

    I also see that Steam.exe is not release handles to your user profile, then I would say you uninstall Steam and reinstall. Event id 1530 is just stating they were unloading the application, steam.exe. This type of errors can cause your user profile is damaged.

    Let us know if that helps.

    Marilyn

  • I updated my drivers and now my computer runs very slowly. How to solve the problem?

    I've recently updated my Intel graphics driver and my drivers Nvidia because they were terribly outdated. As a result, I am able to run some games that I couldn't run before, but my computer became very slow. Now, the startup time is significantly slower, and the worst part is that the actual performance of the system is slower. I checked in the Task Manager, and my physical memory constantly rotates between 40 and 60% (I have 8 GB of RAM, Windows 7) without any game or program being open, except the web browser and Skype.

    What is perhaps the reason for this problem? Is certainly the problem in the drivers? How to solve the problem?

    "My graphics card is GEFORCE GTX 660 M. Is it compatible with the latest driver? »

    Ah! A laptop computer. With laptops, it is generally better to download the driver from the mfg, not Nvidia.

    This is because the computer laptop mfg bring changes that can make the improper generic Nvidia driver.

    and while I always count should not slow down the system... You never know.

    "What services I need to run.


    Just to keep the correct terminology-

    Services is the area where you stopped the service of bitlocker.

    The start is where you keep things from loading when you start in Windows.

    -Most of the time what's in Startup deactivation is something personal need, but there are some things that

    I must be on the left.

    I leave the Intel common user interfaceand Installshield update service, mainly because I don't bother

    Discover what they are doing.

    I also let anti-virus, Realtek audio, software profile keyboard and a few other things active.

    I don't have Adobe Flash loading with Windows, but I don't use it a lot, and when I do the software that

    uses it it launches automatically.

    The bottom line here is that if you have software that you use all the time, it is more convenient to have it start with

    Windows.

    -Concerning the Services. This also has to do with personal preferences to a certain extent, but most things can be left alone.

    I do not use the Services tab in the Configuration of the system, because I think it's only a one time adjustment.

    (Clean boot, linked earlier, is the best tool for the verification of conflicts with Services)

    To stop or disable a Service manually, tap - services.msc - in the run command to open

    the main window of Services.

    There is an Adobe Flash update in Services that should be kept, but when Adobe makes an update

    I select the option notify me, but not to install it automatically.

    I always preferred this with any updates, including Windows updates as there is less chance of a corrupt

    Update If you're aware, it happens and do not do something intensive system while the update is being installed, particularly when an update requires a restart to complete.

    -Registry. In the control run, type - regedit - and browse the registry with the file path in the

    previous post and follow the instructions. You can save the key you are modify if you wish, that the use of the

    backup to change the value to what is current would be faster than navigating to the key again.

    -When playing around with things you are not familiar with creating a System Restore point before you

    making these changes is a good insurance policy.

    If you don't know how to create a system restore point - time to do some research.

    In fact, all of the above is covered by tons of tutorials out there in the www.

    SSD vs HDD - the specifications of the system for you the machine should be in your user manual or on the

    MFG web site.

    Prefetch is useful with HARD drive, because it improves performance somewhat, but read-ahead is not really necessary with SSD.

    and can reduce the life expectancy SSD a bit (there is debate on gravity)

    More research for more details. D

    -If you use a HARD disk and that you have enabled Prefetch, the Prefetch will be rebuilt over time, if you delete the files.

    -Here's another tip for when you are not sure of the impact of deleting files.

    Rename file/folder. You can do something like add another couple of P to the front, or a 1a which will move

    the file to the top of the window. If nothing is wrong in the next few days, you can delete the folder.

    This method protects to empty the trash accidentally and lose the file/folder.

    -Speaking of deleting the file. A great TEMP folder can slow things way down.

    Run Windows, Disk Cleanup . This will remove many files in the Temp folder.

    Or, for a full, clean, go to the - your User\AppData\Local\Temp

    Open the Temp folder and delete anything that can be deleted (impossible to delete the files that are used).

    -Defragment your HARD drive

    -Run the Zig - zag Kit you'd use again and analyze the results.

    It was a long, huh!

    .

  • I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

    I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

    CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

    l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

    https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

  • I'm runinng Windows XP Home Edition 5.1 Service Pack 3 but my computer is very slow when loading files could you tell me about the software to speed things up please

    My computer is very slow runinng when I'm checking my Email and sorting out when I delete the emails I don't want it seems to take more than five minutes to remove as it is very slow to load web pages from the Internet

    HI Bob,

    Unless you use MSE and think the problem is caused by malware (which is possible, but not very likely given the much more likely reasons - however, if this is the case, after return and we will be happy to provide instructions on how to clean your system and check that this has been done correctly and completely) please repost it here for help on this issue: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance?page=1&tab=all&tm=1300700638376 where experts in the field are better qualified to help you.

    Good luck!

  • my computer is very slow and the sound is crackling and move icons on their own i have norton security and scanned and it came with a few flaws, but has not yet sorted

    my computer is very slow especially on the startup sound is crackliing and when you watch videos it jumps a little icons often have moved when I start I have norton security and it did an analysis complete and it came with a few things but has not yet sorted

    Hello

    Try to update norton antivirus defination files and run a full system scan in SafeMode (http://support.microsoft.com/kb/315222).

    I hope this helps.

Maybe you are looking for