My Win 7 64 bit desktop computer does not recognize my iPad 2

Similar Questions

• Desktop computer does not recognize any material (hard drive, cd/dvd-rom)

  Hi, have no idea if anyone can help me out here; but my computer is upward; at first, I thought it was the hard drive, but after further investigation, I noticed in the configuration menu of the BIOS that none of my records are to be noticed; I then went into the "boot" and then into "boot device priority" to see if I can put in my recovery cd so that I can just start there and it gives me a list of boot devices... 1st; 2nd; 3rd; 4. a group disk Boot Priority "NOT INSTALLED" list and it says 'NOT INSTALLED' for all of them... it is a dead motherboard?  I don' t want to go geek team and ask them to charge me 70 males just to tell me that.  I prefer to get all my stuff on the hard drive and hope I can find someone who can fix this... any advice would be really appreciated!

  Thank you!

  And another Wicks dust.

  http://h30434.www3.HP.com/T5/desktop-hardware/m8530f-desktop-PC-with-a-M2N78-la-mother-board-doesn-t-see-my/TD-p/181716?JumpID=reg_R1002_USEN

  Here is a partial list of well-known afflicted models:

  e9140f p5210y p6130y p6142p p6210y p6310y p6320y a4316f

  p6157c p6214c a6720y m8530f m9517c m9350f m9530f m9120y

  m9840sc p6214y

• my computer does not recognize my ipad.

  I want to download music from my computer to my ipad.  Have a itunes account and you have installed itunes on my computer.  I have the model MC820LL, capacity 14.0.  Don't get no menu when I go to itunes on the ipad to be able to do anything, bring just to buy stuff from the store.  has allowed my computer and still nothing.

  Hello

  1. which version of the operating system you are using on the computer?
  2. don't you make changes on the computer before the show?
  3. what happens when you try to download music from computer to iTunes?
  4. you receive an error message?

  
  Method 1:
  You can run the hardware troubleshooter and check.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  
  Method 2:
  You can also try the link suggestions.
  iPhone or iPod is not correctly recognized by computer when USB drivers are not installed properly or are out of date
  http://support.Apple.com/kb/TS1538
  
  You can also get in touch with the Apple support for assistance.
  http://www.Apple.com/support/iPad/

• 10 Windows does not recognize my Ipad

  I can't sync my Ipad with Windows 10 because my computer does not recognize my Ipad and does not allow me to add it as a new device.

  Help, please.

  Asked and answered dozens of times on these forums already:

  If iTunes does not recognize your iPhone, iPad or iPod - Apple Support

• My computer does not recognize my flash drive at all

  In the past I was able to plug my USB key and use it (make changes, and save the information), now when I insert it, nothing happens. The screen displays just the desktop.    The computer does not recognize it.  I tried another drive flash with information on this subject, once again, nothing happened.  I need help how to fix this problem.  Thank you.

  Sounds like your AutoPlay settings need to be adjusted.

  Something to try...

  Insert the flash drive into a USB port and go... Start / my computer...

  The flash player should be recognized by a drive letter...

  Right-click on the drive letter and go... Properties / AutoPlay tab...
  Left click on the button "Restore default settings" / apply / OK.

  Now... Remove and re - insert the flash drive and see if there is an improvement.

  And... the following Wizard may be worth a try:

  Microsoft AutoPlay Repair Wizard
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2648

• BlackBerry Smartphones Blackberry Storm my computer does not recognize my PIN code

  My computer does not recognize my Blackberry Storm when it is connected. Recently, I've updated the software on my phone to 4.7. The desktop software was still in 4.3. On Sunday, I connected the phone to my computer, and it was the beginning of my question. I uninstalled the software from my PC. Then I reinstalled the software updated since the BB site. But I still have the same question. I see an icon at the bottom right of my window that says: "Device disconnected", while in the box PIN number it says, 'NONE '. I don't know if the problem is with the USB cable. When it is connected to my phone, the phone is in charging mode.

  Any advice on what to do?

  jbriones wrote:

  My computer does not recognize my Blackberry Storm when it is connected. Recently, I've updated the software on my phone to 4.7. The desktop software was still in 4.3. On Sunday, I connected the phone to my computer, and it was the beginning of my question. I uninstalled the software from my PC. Then I reinstalled the software updated since the BB site. But I still have the same question. I see an icon at the bottom right of my window that says: "Device disconnected", while in the box PIN number it says, 'NONE '. I don't know if the problem is with the USB cable. When it is connected to my phone, the phone is in charging mode.

  Any advice on what to do?

  Most of the time a simple battery pull will correct this problem.

  Try to do a battery pull... Remove the battery with device 'ON' wait 20-30 seconds and replace the battery, wait for the device to restart (reboot may take up to 2 minuets)

  Mine will also do what you explain and a battery pull will clear up right ir.

• BlackBerry 8830 smartphones & Desktop Manager does not recognize Outlook Express 2000, cannot sync

  I just installed Desktop Manager 5.0 and connected to my BB 8830.  I use Outlook Express 2000 for the calendar and I want to sync it with my BB 8330.  However, in Desktop Manager under Sync / Config / select the device for the calendar, the only choices are Yahoo and text import/export.  Of course, it does not recognize Outlook Express 2000 as a calendar program.  Does anyone have a solution?

  I bought this 8830 mainly to sync its calendar with my Outlook Express calendar.  If this does not work, then I'll go back to my cell phone operator.

  I installed Desktop Manager 4.1 and it works now.  Be aware with this version, once you connect your BB to your computer, unless you go through the Wizard Windows Found New Hardware, Desktop Manager does not recognize the connection with your BB and your computer (I don't have to do with version 5.0).

  RIM should be more attentive to people with a recent phone, but still using an earlier version of Microsoft Outlook / office.

• Computer does not recognize the monitor after update of Win7.

  Computer does not recognize the monitor after update of Win7. Have a projector connected to the computer with the monitor; from clogging the last evening updates have been installed. When the computer has been restarted this morning the monitor is entered but did not detect a signal and fell asleep: do not get an image on the monitor or projector.  Suggestions?

  It is a laptop?

  And if you start in safe mode?

  Desktop

  Haven't tried safe mode
  Disconnected the projector, and then restarted; back to work now!

• I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  I have a My Passport to the top by car and I get error messages on this to be ejected (although it was still connected). Now my computer does not recognize the drive. All solutions?

  Drive, interface in the crankcase of training controller, or the USB port or the cable may be faulty.

• Computer does not recognize Toshiba external 500G HDD - HARD drive

  Sorry, I use a translator, because all the illiterate

  A year and a half used the hard drive, and now the computer does not recognize it, the TV too.
  In Device Manager, it is there, but says "initialization error".

  What should do?
  Thanks for the replies

  You have partitions software installed on the laptop you?
  I guess that the HARD disk does not appear in windows Explorer, but common partition as the partition Wizard tool might be able to recognize the HARD drive.
  You can try to format the HARD disk and to create the new NTFS partition.

  Another solution:
  Usually, you can initialize the disk by DiskManagement.

  In disk management, right-click the disk you want to initialize and then click on initialize disk.
  In the dialog box initialize the disk, select the disk to initialize.
  You can choose to use the master boot record (MBR) or the style of partition GUID partition table (GPT).

  Once a disk is initialized, you can create partitions on it.
  After you create a partition, you can format the partition to create a filesystem (NTFS).

• My computer does not recognize my I - Phone 5s, why?

  My personal I-phone 5s went crazy about 3 weeks.

  • wouldn t blue tooth with my truck-telephone calls
  • connection of the cable with truck, 2 songs, radio and telephone game crashes
  • try to use SoundHound and it changes the mode on my XM radio
  • my computer does not recognize
  • yet my computer recognizes my I - Pad Air

  Did a reset - erase all content and settings;

  • There will be phone calls Bluetooth
  • yet to mess with the radio when you use SoundHound
  • computer doesn't always recognize it
  • Yet computer wife recognizes it?

  PC or Mac?
  When you say "does not recognize" what you want to do?

• The computer does not recognize my skycaddie is hung

  Synchronization of caddie program is installed, but it seems that the computer does not recognize my skycaddie is hung

  Original title: I can't get the computer to recognize my sky caddie - when I go to install a new device is not able to find it

  Hello

   
   
  1. the device is recognized in Device Manager? Is there a yellow exclamation point or question mark next to the device?
   
  2. don't SkyCaddie connects to the computer via USB? If so, is he recognized initially until the software is installed?
  3. do you receive any error messages?
  4. What is the antivirus installed on the computer program?
   
  If you connect the device via USB, I suggest you to change the USB port and check with the question.
   
   
   
  
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
   
  I suggest you provide more information about the issue so that we can better help you.
   
  I also suggest you to see the link below for more option support about the issue.
   
  http://clubsg.SkyGolf.com/content/FAQ/SkyCaddie+technical+support+questions
   
   
   
  I hope this helps.

• IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot op.

  IS PowerShot A4000: My computer does not recognize my camera when it is connected, saying "Windows cannot open the device because the configuration (in the registry) is incomplete or damaged". This a recent phenomenon. I reloaded the latest Camerawindow software nothing works. Recommendations to solve this problem?

  Problem solved. Recommendations by e-mail has helped. I had to use 'Device Manager' from the Vista Control Panel for adding new hardware. I also need to add a new driver. The Kodak in Windows Vista camera driver worked. The camera is now recognized. Thanks for the help.

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Computer does not recognize LaCie external hard drive when it is connected.

  Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.

  The device is a hard drive (250 gb) bought in 2006.   LaCie support has provided relevant solutions.

  I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.

  I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.

  I have disabled the Windows Firewall.

  The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).

  Thank you very much for your help.

  Thanks for the reply.

  In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.

  So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.

  It worked for me.

  Thanks again for the reply!