My computer doesn't read any cd I put in that.

Similar Questions

• Satellite A20 - CD/DVD doesn't read any type of disc

  I just got a used Satellite A20. Former owner uninstalled programs, and now the CD/DVD doesn't read any type of disc. It has worked well for the former owner.

  Satellite A20C - 0231Q Windows XP - Home drive SD-R2412

  In the bios a cd-rom drive is listed
  In Control Panel, the drive is listed, but with a yellow triangle and a message indicating that the device cannot be used... driver problem?

  Is there a way to locate the driver for an older machine, install it, without making a complete recovery (as the cd player does not work?)? I noticed that the driver Announces began with the Satellite A - 200.

  Any suggestions will be appreciated!
  Thank you!

  Boarder's right. If the drive is listed in the device with the yellow exclamation point manager and the drive is not listed in Windows Explorer, you can resolve following the method described in the document of Microsoft.
  After reboot everything should be ok again.

• Satellite L750-11W - DVD rom doesn't read any DVD

  The problem is very annoying, that the dvd rom is not reading my dvd;

  I tried to install a game on a dvd but it doen't want to read it, I have, but another dvd (different game) and it read; the two DVD works on other laptops (I checked)

  DVDs are not made by me, they are purchased in the store

  any ideas on what's going on? I reinstalled the driver but nothing

  I use w7 ultimate x 64

  I found your other son that you posted some time there is failure of CD/DVD drive.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=72663

  My idea was to clean the laser lens, but has already been suggested in other threads as well.

  In my opinion, there is not much to do sometimes firmware could be updated to improve the compatibility between the different discs, but this is possible only in case these packages would be available.
  I checked the page of the Toshiba UE driver and firmware update is not available for the series L750.
  So I guess that your problem is related to the WEIRD malfunction.

• Why my computer can not read any CD?

  Every time when I inserted the CD into the computer, nothing appears on the screen... .and I don't know what the problem

  Hello

  See if that helps you.

  Did you go to start > computer > open the CD from there?

  There is a "Fix - it" Microsoft for your problem on this link

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  If above doesn't fix it, continue with the help of Microsoft:

  http://support.Microsoft.com/kb/982116/en-us

  See you soon.

• Have Dell Inspiron 1720, it doesn't read any type of dvd

  I have windows vista and my cd/dvd drive does not read or play any type of dvd.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• my windows xp computer doesn't read DVDs without further

  I COULD STILL READ CD AND BURN STILL

  I COULD STILL READ CD AND BURN STILL

  Click on the link below and run the fix it.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• Windows 7 doesn't read registry information with keyboards after that new user is made

  Hello.

  What I'm doing - trying to make a customized image of Windows 7 for more deployment on users computers, so that after installing it, language of keyboard entry and keyboard layouts are switched to those I need (Latvian).

  What I do is install some new keyboards for the administrator account, and then change the registry with these keys:

  [HKEY_USERS\. DEFAULT\Keyboard Layout\Substitutes]
  "00000426" = "00030426."
  [HKEY_USERS\. DEFAULT\Keyboard Layout\Preload]
  '1' = '00000426. '
  "2" = "00000409."

  Now, when I make a new user account on this PC, the default input language and layout is switched back to U.S.. Shouldn't each new user get/copy account settings the HKEY_USERS\. BY DEFAULT?

  I do not know. You must check with Technet. They are good in these: http://social.technet.microsoft.com/Forums/en/categories/

• My DVD - RW drive won't read any discs of all kinds

  Original title: Please help me with my cd/dvd!

  I have a laptop HP Compaq 6735 s with a Xp Sp3 system and I have problems with the Sony optiarc DvdRw AD7561S dvd, he doesn't read any type of disc (Cd and DvD new or original or burned), anyone have a suggestion for me please?

  Hi FabrizioBazzani,

  ·         You get the error message?

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

• Satellite U400-112 CD/DVD optical drive doesn't read CD disks

  Same problem, my CD/DVD drive doesn't read any cd, but it works with the DVD. Same problem if I try to burn CDs (it does not work, clear yellow on the drive and the drive gets hard blue light on the laptop (U305) permanently on) but it's ok to burn DVDs, even if it takes long to start reading a new dvd. How to solve it? I tried to find a new firmware for the drive, but apparently does not exist (my drive is HL-DT-ST DVDRAM GSA-U10N ATA device). Can anyone help? .

  HI Arkadiusz Kulesza,

  You should try to clean the lens using a microfibre cloth. Maybe dust is on the lens it takes long to start to read the disc.

  I had a similar issue that he wasn t possible to burn a DVD and the reason was the CD/DVD drive itself. I replaced it with a new one and everything worked then! :)

• Satellite 5200-903-drive DVD not reading any type of CD

  My old 5200-903 Satellite with multi DVD doesn't read any kind of CD; material and pilot test shows no failure; What can I do else?

  Have you noticed the same test with DVD?
  I can't say for sure, but it may be that the optical disk drive is defective.

  It may happen that the calibration of the lens is defective and objective cannot be calibrated to the CD, but with DVD works perfectly.

  Check it out.

• computer does not read the disc

  my computer used to read any disk and was able to burn CDs now it reads only DVDs. How can I fix

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean power
  and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates
  and the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• DVD/CD driver is detected by computer but when any disk is put in it does not read.

  LightScribe DVD Supermulti drive / CD - Writeris found by computer, but can not read any kind of dick that is inserted. How can I fix this. or do I need a new driver?

  Hello

  Please make all below even if you have done some before as it is often the set of operations which solves
  the question.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Cannot read ANY book - even bought. code E_ADEPT_INTERNAL. Cannot remove the authorization/reauthorize with computer: "unable to clear permission. Please try after some time. "Tried for two weeks...

  Windows:

  1. Close all applications.
  2. Click Start > run.
  3. Open, type regedit in the text box and press ENTER. The Registry Editor opens.
  4. In the left pane of the registry editor, locate the following registry key: HKEY_CURRENT_USER\Software\Adobe\Adept
  5. Select the key of the follower.
  6. Choose file > export.
  7. In the export registry file dialog box, select the branch selected under export range. Enter a name and location for the backup registry key, and then click Save.
  8. Right click on the key to the follower, and then choose Remove.
  9. In the dialog box confirm the key deletion, click OK.
  10. Close the registry editor.
  11. Open Adobe Digital Editions and reauthorize.

  Macintosh:

  1. exit the Adobe Digital Editions software.
  2. Navigate to / Users / / Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash.
     If you use 10.7, see library access hidden files. Mac OS 10.7 and later.
  3. Open Adobe Digital Editions and reauthorize.

• Computer will not read my SD cards

  I am trying to download pictures and videos from my SD card as well as a PRO Duo SD card, and my computer doesn't seem to be reading them.  I've done it before without any problem.  Please help, here are pictures of the wedding and the bride and groom are to rely on me.

  Hello knoxlab,

  Your computer cannot read your SD card after you have made a recovery on your laptop.

  Go to Device Manager and uninstall the card reader, it should include the IDE ATA/ATAPI controllers.

  This will uninstall and reinstall the driver for the card reader.

  Here is a link to the Device Manager.

  By clicking on the White Star congratulations on the left is a way of saying thanks!

  I would like to know how everything goes.

  Nice day.

• After re-installing Vista: error message "Windows doesn't detect any hardware networking".

  On another thread Microsoft Answers, I was advised to do an "inplace upgrade" to Vista to solve a problem I had with the opening of Word documents.

  I followed the instructions but was unable to do the upgrade in place of Vista.

  (The 'Upgrade' option has been blocked during the installation process.  And there is no other choice available "Troubleshooting", even if the directions had mentioned that this could be an option.  There is no workaround solution mentioned about how to proceed where it upgrade when the 'upgrade' option has been blackened.)

  So, I did a clean install of Vista - after saving all my files on an external drive, of course.

  This fixed the initial problem that I ask.

  Now, however, I can't access the internet after you complete this process.  I tried via wireless and services to broadband.

  Reads the error message: "Windows doesn't detect any hardware networking."

  How do I fix this?

  Thanks in advance.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner