After re-installing Vista: error message "Windows doesn't detect any hardware networking".

Similar Questions

• IdeaPad Y500 "Windows doesn't detect any hardware networking".

  Hello

  I have problems with my recently purchased Lenovo Ideapad Y500 because it is impossible to connect to the internet. As a first step, the connection worked well and I managed to set up the connection Wireless using an ethernet cable.

  The problems started when I installed the F-Secure virus/firewall program - in the middle of the installation process (some time after the installation tool uninstalled MacAfee default program) the laptop became unresponsive. First of all everything except the background color disappeared, then the screen went completely empty and the laptop has not responded to other buttons. I waited for about 20 minutes until what I pressed the button for a few seconds in order to stop the laptop.

  The laptop rebooted normally, and the installation of F-Secure program was still underway. However, because the laptop had been closed at halfway, I decided to cancel the installation and re-install the program. I removed the parts installed with Control Panel tools, to realize that the wireless internet from the laptop disappeared.

  The laptop detects all connections; the network group says no connection is available. Previously, before the strange white screen problem, the Panel showed several nearby wi - fi networks. When I try to connect via the Network Center and sharing, I get only "Windows does not detect any networking hardware." Connect the ethernet cable (connected to the modem/router) makes no difference.

  I managed to solve this problem. For some reason, the pilots of two network components have been updated but did not work, so I did a restore on those, the question of fixing.

• Windows doesn't detect any hardware networking

  We have a HP Pavilion desktop computer, model # a6610t, by using the Vista operating system.  We have been connected to the internet wireless for almost 1 year and now everything suddenly that he cannot find wireless networks.  We are able to connect wirelessly to the Internet on other laptops, and I can connect to the internet on the desktop with a cable so I know that this is not the modem or the router.  I have also unplugged the modem and routers - still without success.

  We ran a virus scan and no treats have been identified.  The only different thing that we see is that we have updated to Internet Explorer 8.

  Any suggestions?

  Please try reinstalling the drivers of the Recovery Manager network and also please inform the status of the wireless button. It turns blue or remains orange.

• Windows doesn't detect any network hardware... HELP Please

  Hope someone can help me...

  I have a HP Pavilion g6 and have been able to connect to the internet wirelessly with no problems. So far!

  I have two user accounts on the laptop, Mine which is the main and also a guest account. I am able to connect to the internet and so post this message on my own account, but when I try the guest account which was also connected to the internet without any problem has now suddenly stopped working...

  This message is displayed: Windows doesn't detect any hardware networking

  but I can connect to the internet very well on my user but not on the other...

  Any help?

  Thank you

  I highly recommend to disable the guest account.

  You use a malware antivirus\anti product when you are connected to the internet?

  Best regards

  ERICO

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB951847 will not, install no error message - windows XP Pro

  Cannot install update .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5
  What should I do?

  Most common:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  TaurArian [MVP] 2005-2010 - Update Services

• 6 - 1010sa envy: Windows doesn't detect any networking hardware after reinstallation of Windows 7

  Hello

  I'm looking for the following drivers who disappeared after I reinstalled Windows 7 on my 6-1010sa desire:

  Network controller:

  PCI\VEN_8086 & dev_0887 & subsys_40628086 & rev_c4

  PCI\VEN_8086 & dev_0887 & subsys_40628086

  PCI\VEN_8086 & dev_0887 & CC_028000

  PCI\VEN_8086 & dev_0887 & CC_0280

  Ethernet controller:

  pci\ven_10ec & dev_8168 & subsys_1896103c & rev_0a

  pci\ven_10ec & dev_8168 & subsys_1896103c

  pci\ven_10ec & dev_8168 & cc_020000

  pci\ven_10ec & dev_8168 & cc_0200

  PCI device:

  pci\ven_10ec & dev_5289 & subsys_1896103c & rev_01

  pci\ven_10ec & dev_5289 & subsys_1896103c

  pci\ven_10ec & dev_5289 & cc_ff0000

  pci\ven_10ec & dev_5289 & cc_ff00

  Thank you very much

  Hello:

  You need these drivers...

  This package contains the Intel wireless drivers and Intel PROSet for Wireless LAN cards Intel (see supported devices) in the notebook models that are running a supported operating system. Intel PROSet includes Intel "My WiFi" feature.

  File name: sp57090.exe

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56726.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp56725.exe

• HP 15r_250tu: driver Wifi doesn't detect any wifi network

  Im trying to activate a wifi. When press F12, there is no option for on/off a WiFi there are Modeavion... ihve already install a Qualcomm AR9000 LAN atheros wireless driver, but his does not work...

  Hello:

  You need these... good drivers for W7 and W8.1...

  Wireless:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_143747_1&swEnvOid=4059

  Bluetooth:

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=6943827&swItemId=ob_147332_1&swEnvOid=4059

• SE error message: Windows has not start because the following file is missing or damaged. Windows root\system32\hal.dll, after removing the RAM

  Original title: computer \sysytems32|hal.dll shows this when starting. Old dimension 2350.

  I tried to install McAfee Total Protection on an old Dimension 2350 and after that computer system has been slow and useless. After the call of Mcafee, they told me my RAM was too small at 640 MB and said if necessary to upgrade to 1 GB. I called Dell and they wanted to know that the RAM so had to remove it. After removal and reinstallation of the computer, but I got the error above.

  I have the reinstallation windows xp cd drive professional service pack 3, but can not get beryond this message options

  Hi gfritz1,

  You can consult the following Microsoft KB article and check if it helps:

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot install Windows update, the error message "" Windows update canoe currently check for updates, because the service is not running ".

  Initial version of updated title: windows

  My "Windows update" is not updated. The problem started recently and its shows the error message "Windows update canoe currently check for updates, because the service is not running. You may have to restart your computer "." I tried it with several reboots, but there still is not up to date. Kindly help.

  Hello

  Have you made changes on the computer before this problem?

  Method 1:

   

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Try the procedure described in the following article and check the status of the issue.

  http://support.Microsoft.com/kb/822798

  Restart the computer and check it please for windows update.

  Hope the above information is helpful.

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• When you try to format CD - RW, receive error message 'windows could not complete the format' Vista SP2

  Impossible to format CD

  Windows Vista Ultimate SP2 installed

  When you try to format CD - RW, error message "windows could not finish this format.

  Because the installed SP2 (which supposedly contains the fix for the problem) can not install the patch - receive 40 Code error when system tries to decompress the files.

  Help?

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

  Burn a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-CD-or-DVD-format-should-I-use

  Should which CD or DVD format I use?

  See if help above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Otherwise:

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your question in Vista Hardware and drivers Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• I have intalled Windows 10 and when I tried to open my pdf files I got this error message: Acrobat doesn't have its Basic DLL

  I have intalled Windows 10 and when I tried to open my pdf files I got this error message: Acrobat doesn't have its Basic DLL

  Hi edwinn24434551,

  You have Acrobat or Reader installed on your computer?

  Also, let me know the version of Acrobat / Reader & operating system installed on your computer?

  Kind regards

  Nicos

• Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will be closs after several attepts.

  Error message, Windows no disk Exception Processing Message c0000013 parameters 75b6bf7c 4 75b6bf7c 75c6bf7c? This error message appears on start up, but will close after several attempts.

  The message above appears on start up. Want to know how to prevent it from happening?

  Hello

  • What were the changes made before the show?
   
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
   
  b. it is a possibility that there is a startup program that is launched with a command line and it appears.
  You need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.
  I hope this helps.
  
   

• Windows xp hp will not start. error message: Windows has not start because the following file is missing or corrupt: < root windows > \system32\hal.dll. Please re - install a copy of the above file.

  Hello, I recently restored my windows hp tower to its factory because of virus settings and when I restarted my PC I recieced this error message: Windows has not start because the following file is missing or corrupt: \system32\hal.dll Please reinstall a copy of the above file.  where can I get a copy? and is it possible to download the start software and burn it to a cd?

  Hi FRANKGRIMES_945,

  What is the model of your computer?

  (a) you can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your machine.

  (b) thereafter, follow this link & check if you are able to start correctly on the desktop.

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  Hope the helps of information.
  Please post back and we do know.