my computer freezes HP pavilion A6322 at startup

Similar Questions

• Computer freezing and startup repair does not solve the problem.

  fix my computer when windows start dump then launch startup, but does not solve the problem. Can you help me solve the problem

  Hi Wwiese,

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the problem, the computer freezes in the commissioning on the Windows 7 computer.

  I would appreciate if you can help me with the following information.

  1 were there any hardware or software changes made on the computer before this problem?

  2. are you able to boot into office?

  3. you receive an error message/code?

  I suggest you try these methods and check if it helps.

  Method 1

  Disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then download drivers software updated for this particular device.

  Method 2

  Try to start in last good known Configuration and see if you can start very well.

  Using the last good known Configuration

  http://Windows.Microsoft.com/is-is/Windows7/using-last-known-good-configuration

  Method 3

  Start the computer in safe mode and check if the problem persists, if the question does not persist then perform the clean boot and check if the problem resolves.

  Step 1

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed. Please click the below mentioned link.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  http://support.Microsoft.com/kb/929135

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 4

  If the problem persists, I suggest you perform a startup repair and check if it makes a difference.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  In addition, you can do a System Restore the Windows Recovery Console.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Select the boot device appears to casual throw & computer freeze certain functions

  HP Compaq Pavilion 64 bit, windows 7 Home premium

  6 months ago replace hard drive with the drive hard seagate 1 TB 64-bit

  Computer functions started random freezing of microsoft works, don't access the start menu, task bar functions, classifications, etc. all random works poorly but still able to use count in browsing the web. I look at you tube for long periods seems to stimulate the problem. Computer being left pending. Computer freezes seems to disappear spontaneously during use or after sleep or restart.

  Commissioning shows a blue square in the middle of the screen with:

  Select the boot device

  ST 1000 DM003-1 ER162

  HP DVD - Ram GH40L

  F4 amorçage using default

  What boot device use.

  Unplugged the hard drive and turned on pc and hp dvd - ram gh40l was only peripheral boot

  Replaced the motherboard battery already.

  I did the command line; sfc/scannow, HDD and motherboard diagnostics, repair of disks does not.

  One alternative is to reinstall windows 7 with discs or install windows 10 as an alternative.

  Hello @zoboomafoo,

  Thank you for all the information!

  What have been the results of physical tests?  If all the past, then it seems that you encounter problems with the operating system.  If the problem is actually related to the operating system, then by reinstalling Windows will help you solve it.  This should help to address issues with malware.  Upgrade to Windows 10 is an option, however, you don't have full support of drivers.  I hope this helps.

  Kind regards!

• what went wrong and where my pictures go? With the help of computer hp laptop Pavilion g6

  I use the computer laptop hp Pavilion with windows g6 8.
  
  For about a week now my laptop has acted strange.
  He took 10 minutes to start and when I enter my password it takes forever to load.
  A few days after this problem started the laptop began to have more problems, I would turn it on and the screen remains black. It would take 20 minutes or more for the screen to finally show a display.
  
  YESTERDAY, my laptop fan started blowing very strong wen I use it and when it would happen all would freeze and I was unble to use the slider or type AT ALL!
  
  Now today I turned on and everything disappeared!
  ALL my pictures have disappeared.
  My start page icons are no longer on the start page and an icon not displayed on my desk more eigther.
  In addition, the THEME has changed on the device.
  
  Someone, please anyone can give me a help?
  Thank you

  You are welcome. I'm really sorry about the files. According to the limited information that I have, it is difficult for me to deduce what would have caused this. May I know if you are the only user on this laptop? You have 1 single Local user account?

  I see. I understand perfectly. I've been there before and I know it can be very upsetting. I understand that the lost files were close to your heart. So, I would suggest you try the trusted third party software for the restored files. The Windows operating system doesn't have a built-in software that can help us in this regard. A file when it is deleted is never removed from your hard drive. Still, a copy of the file is in a location on your hard disk and requires a software code, what software of this type will have to get recovered.

  Please, try the free software mentioned on this site: http://pcsupport.about.com/od/filerecovery/tp/free-file-recovery-programs.htm

  NOTE: The URL above will take you out of the Hewlett-Packard Web site. HP does not control and is not responsible for information outside of the HP Web site.

   

  I hope this helps.

   

  !------------------- Please click on the star of CONGRATULATIONS on the left to say 'thank you '. Check the box "Accept as Solution" if she answers / solves your problem. Thank you-----------------------------------------------------------------!

  I am an employee of HP.

   

• Computer freezes & closed by itself.

  Original title: what is the problem?

  I would like to know what was wrong with my computer. The computer freezes all the time and off what it self. I hope someone could help me, because I work at home as a data entry keyer and I really need the equipment works properly. Thank you

  Katia

  If the computer stops himself who suggested the failure of the system.

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

  Hope this helps, Gerry Cornell

• In XP C;\windows\sec710.dll & C:\windows\imubuhuwonezonus.dll get "Error loading, be found" computer freezes

  C;\windows\sec710.dll & C:\windows\imubuhuwonezonus.dll, I get this "error loading, be found", the computer freezes? Can't find these files?
  A restored and does not work. A ran malware and viruses. These files are not listed.

  If I leave my computer for a while it freezes. When you click Ctrl, Alt, DEL, it goes to my security window.

  Do the first, launch scans, then if your computer is always bad conduct, we'll fix it.

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
  Here are the detailed instructions that protect you and solve your problem in the 'right' way.
  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• My Vista computer freezes quite often. I learned that PodData.ll is not part of Msn. What should I do?

  My Vista computer freezes quite often. I learned that PodData.ll is not part of Msn. What should I do?

  Hello

  1. you have any anti-virus installed on the computer program?

  2 - is the computer freezes when running a program or randomly?

  Method 1:

  Step 1:

  I suggest you to check if the problem persists in with clean boot safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Method 2:

  I suggest you to download and install Microsoft Security essential and do a full scan.

  Microsoft Security Essentials

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Note: It is possible that some data could be removed if infections are detected.

  For MSN related issues, I suggest you to contact MSN support.

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

• When I close the lid and open it again, my computer freezes

  Original title: back to zero problem

  I am running Windows Vista Home Premium on a laptop ACER 5570. When I close the lid and open it again, my computer freezes. Just a black screen and nothing that it will restart. I have to close it using the power button, and when I try to launch again the computer does not start upward. I need to reboot with a Vista startup disk. What is my problem?

  Have tried to take the battery out and restart, but no go.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Try to update the latest drivers for the graphics card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  Try to perform the commissioning of repair and check if this may help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• computer freezes watching a clip

  I have an acer aspire 7736 64 bit windows 7 laptop. Whenever I'm playing music in itunes, or watch a video of my computer freezes and make a buzzing sound that he plays, everything freezes then I have to press the power button to turn off. I've been to some of the forums and tried a few things others have suggested as... was updated device drivers Manager, diagnostic test that has not been able to detect something wrong. I even did a system recovery to return my computer to its factory settings, I bought a fix he written software who did nothing but clean registry. Anyone has any suggestions I would really appreciate all I have updated the drivers and all the comments.

  Original title: video troubleshooting

  Hello Tracey,

   
  Thanks for posting your query in Microsoft Community.
   
  I understand that you have problems playing videos in Windows 7 computer.
   
  But I would like to know more information about this problem to help you better.
   
  In the meantime, please try to follow the following suggestions to solve the problem.
   
  Method 1: I first suggest you perform a clean boot and see if the problem occurs in the clean boot state because, put your boot system allows to identify whether third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  
  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135
  
  Note: See "How to reset the computer to start as usual after a clean boot troubleshooting" under more information to prepare the computer to start as usual after a repair.
   
  Method 2: Check Event Viewer for error messages that are associated with this program. Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs. Open the link and follow the instructions to get the event logs, so that we can see which application is defective.
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
   
  Additional information:
   
  Optimize Windows performance

  http://Windows.Microsoft.com/en-in/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

   

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  8.1 Windows, Windows 8 or Windows 7 hangs or freezes
  http://support.Microsoft.com/kb/2681286/en-us

  Warning anti-virus (running Microsoft Safety Scanner): The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps. Otherwise, answer this answer with the required information and we will be happy to help you further.
   
  Thank you

• all open files + browser minimizes automatically followed by 2 minutes of computer freezes

  about once a day, a different time each day, out of the blue folders, all open + my browser will automatically reduce followed two whole minutes of my computer freezing and light filled up all the time... It starts to panic * me off! He did this for about a week now, and I desperately need help to find how to fix it!

  Hello

  (1) don't you make changes to the computer until the problem occurred?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to boot in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2: If the problem does not exist in Mode safe then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• computer freezes while using safari

  In recent times, at least once a day the computer freezes while using safari. All of a sudden, I'll realize the mouse won't scroll and I can't move a window. Force quit doesn't work, I have ripped off, unplug and then reverse the process. I used yesterday first aid in disk utility, but did not and bizarre messages. Any ideas what I should try next? FYI, I use actually OS 10.11.3.

  Please go to http://www.etresoft.com/etrecheck , download and run EtreCheck, copy paste here the status report.  EtreCheck is a diagnostic tool used by many contributors here to help diagnose problems with the computers of the complainant.  Sometimes, it provides all necessary assistance, that sometimes we need more information beyond that.  However, it is always a good start.  EtreCheck has also been developed by an employee trust and respected here.

• Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

  Which firewire cable do I need for computer desktop HP Pavilion Elite HPE-360uk

  roches28,

  According to the specifications , it is an IEEE 1394 (aka Firewire 400) 6wire.

• Hp18All-OnePc: my computer freezes when it restarts

  Hello. My problem is that I installed 10 Windows to restart the computer freezes and the only solution I found is to unplug and re - connect. any help?

  Hello. My problem is that I installed Windows to restart the computer 10 crashes and the only Sulution I found is to unplug and Re-Conecct. Any help?

  @Niqo14,

  Hello and thanks for the display on the HP support forums.  So that I can help you with your problem of gel have you installed as an upgrade, or you created the stand alone dvd to perform a clean installation.

  If you did upgrade anything you want to do is run the stand-alone installation of windows 10.

  So, you can run the windows update first convenience store to see if this solves the problem.

  Here is a link to help you with that.

  Troubleshooting of windows update.

  Please report if you need any other assistance.  Thanks again for the post and have a great day.

• How to type the special symbol by computer hp laptop pavilion g4

  Hello, everyone

  I use a computer hp laptop pavilion g4. Is the keyboard doesn't have the NumLock key

  I want to write several special symbols using a combination of keys (Alt + xxx)

  Please show me how to do it.

  Thank you very much!

  The only other option is to use the virtual keyboard in combination with the laptop keyboard.  You can search online to see a lot of different proposals, rather than posting me here.  Here's just one of the examples.

• I get a silverlight popup every time I try to send an e-mail, then on computer freezes

  I get a silverlight popup every time I try to send an e-mail, then on computer freezes

  Uninstall and reinstall Silverlight.