My computer freezes when I use the new Firefox 4 v

Similar Questions

• my computer freezes when I use the network.

  I had a consistent problem when I run a browser. the system hangs: no mouse or keyboard, no sound.  I would appreciate input what to do next because its use is quite strong. I went into the bios and restored the default optimal to my computer.

  MS windows 7 Home Edition premium; version 6.1.7601 service pack 1 build 7601; Dell alienware x 51; PC x 64; Intel core i7-3770 cpu 3.40 ghz, 3392 mhz, 4 cores, 8 logical processors; BIOS version/date alienware a12, 18/01/2013; SMBIOS version 2.7;

  16 GB of ram; me 8.1.20.1336 firmware version.

  I force close down and ran msconfig/tools/event viewer. PIN I did the time the camera occurs. seal are registered to control events:

  event 1001, dhcp-client:

  Your computer not was not assigned an address from the network (by the DHCP server) for the network card with network 0x0003C980080B address.  The following error occurred: 0 x 79. Your computer will continue to try and obtain an address on its own from the server network address (DHCP).

  event 7001, the Service Control Manager:

  The computer browser service depends on the Server service which failed to start because of the following error:
  The dependency service or group was able to start.

  event 10005, distributedCom:

  DCOM got error '1084' trying to start the VSS service with arguments "" to start the server:
  {0B5A2C52-3EB9-470A-96E2-6C6D4570E40F}

  event 1014, events dns client:

  Name resolution for the name of flashservice.adobe.com has expired after none of the servers configured DNS responded.

  event 1001, windows event report:

  Bucket of error, type 0
  Name of the event: LiveKernelEvent
  Answer: No available
  Cabin ID: 0

  Signature of the problem:
  P1:
  P2:
  P3:
  P4:
  P5:
  P6:
  P7:
  P8:
  P9:
  P10:
  Attached files:
  C:\Windows\LiveKernelReports\WATCHDOG\WD-20140313-1248.dmp
  C:\Windows\Temp\WER-22609224-0.SysData.XML
  C:\Windows\Temp\WER2E4.tmp.WERInternalMetadata.XML
  These files are available here:
  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\Kernel_0_0_cab_138902e4
  Symbol of the analysis:
  Recheck for solution: 0
  Report ID: c5c5c75b-aad7-11e3-a0b3-0003c980080b
  State: 0

  event 14, nvlddmkm:

  The description for event ID 14 nvlddmkm source is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  Thank you very much

  Marybeth

  Hi Vincent,.

  From the information provided, I found something that caught my attention:

  event 1014, events dns client:

  Name resolution for the name of flashservice.adobe.com has expired after none of the servers configured DNS responded.

  We had problems with Flash player since the last update. For reasons I can't explain included on Adobe finally release this 'novelty' that basically makes a request to flashservice.adobe.com that never get an answer (the domain does not exist). The event shows your machine is trying to achieve this t area and finally the request is aborted by Timeout.

  This may be related to your problems, maybe not.

  To work around the problem, you can add flashservice.adobe.com in your host file and that it points to 127.0.0.1 in this way the process not be waiting for always a response which only you and take the next step.

  I hope it helps

• When you use the new button tab is open a new tab, with a search engine that I don't want. How to change this to make it possibly open my home page?

  When I use the new button tab in the tab tool bar, it opens the Yahoo! search engine. I would like to change it to open my home page, or a search engine different. Is it possible to do it and how?

  Thanks for any help!

  I think that is changed by an extension. If you run Firefox in Mode safe search engine comes up when you open a new tab? http://support.Mozilla.com/en-us/KB/safe+mode

• Anyone who has a problem with the system crashes when importing using the new interface to import

  Anyone who has a problem with the system crashes when importing using the new interface to import

  Can specify you what Adobe program you use so that we do that your post is in the right forum?

• Windows crashes when I use the new modem.

  I just started using the new modem broadband model Maxis Huawei E1762. After some time using his accident from my window. Varies according to the duration before crashing immediately in a few hours. Help...

  Hi Azmahamd,

  The latest drivers for Windows Vista are installed? Visit the modem manufacturer to check if newer drivers are available, if they are then install them.

  John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

• Safari freezes when I use the button "share" after OS updated 10.11.5

  Since I upgraded to OS X to 10.11.5 I can no longer use the ' share' button as it freezes Sarari. If Safari is open in multiple windows, it freezes only the active window. Pls does anyone know a fix?

  10.11.5 - Safari 9.1.1 - MacBook Pro OS (retina, 13-inch, mid-2014, 2.6 GHz Intel Core i5, 8 G 1600 MHz DDR3)

  Hello..

  Safe Mode boot removes the system caches can help after an update.

  Follow these steps to start in safe mode.

  Start or restart your Mac.

  As soon as you hear the startup tone, hold down the SHIFT key.

  Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then launch Safari and try to use the button share.

  On Safe Mode

• Computer freezes when I connect the "rocket" sanza

  I recently bought a modernised 8 GB Saza Fuze sellout.woot.com.  When I plug it into my laptop that is running Windows Xp with sp3 the entire computer freezes.  When I unplug the laptop computer UN is "rocket" freezes.  So I tried to change auto to DPW, always the same result.  Then I tried MSC and that no longer works.  I then tried a desktop computer running Windows XP with SP3 and this computer has frozen too with all the settings and unlock when you unplugged.  Then I tried a third computer running windows Vista and the computer did not freeze but the computer does not see the mp3 player.  I tried all automobiles, MTP and MSC, and none of them worked on the vista computer.  During all tests when I plugged the mp3 player he sat there and load. He makes no attempt to connect to computers at all.

  Welcome to the undependability of woot. Send it back. You've done enough troubleshooting.

• The computer hangs when you use the DVD player

  Whenever I am playing a DVD, any DVD playing software that I use (Windows Media Player, Real Player, PowerDVD), the DVD plays fine until I move my mouse... then the computer freezes immediately. CTRL + ALT + DEL doesn't work. I have to use the power button to turn off the computer.

  I updated the DVD drive device driver; still crashes.

  I have a Dell Optiplex GX 280

  Windows XP SP3

  DVD is a teac dvd + rw dv-w58e

  
  

• Warnings warning when I use the New-VIPermission cmdlet...?

  I used PowerCLI to set permissions on the Windows VM in our environment. I found the "New VIPermission" cmdlet, but when I use this cmdlet I a few warnings.

  When a run this code:

  

  I get these warnings:

  WARNING: The 'Entity' parameter is obsolete. This setting no longer accepts multiple values.

  WARNING: The "Principal" parameter is obsolete. This setting no longer accepts multiple values.

  I use a cmdlet that is documented in VMware vSphere 6.0 Documentation, so, what's the problem?

  With respect,

  Wouter

  No, not as long as you do not use the parameter in the configuration described, i.e. by passing several values of the main parameter and the entity.

• Changes color when I use the new export or re-export fast in 2015

  Hi, I just upgraded to Photoshop, 2015.  I noticed, that they put the "Save for Web" command as a feature of the legacy, so I tried the new export and re-export fast, but my images accompanying through radically altered color.  (I'm saving to jpg, maximum).  Some examples of what I mean.  However, if I use the legacy, save for the Web or save slot, the color is fine.  Anyone know what is happening with the new export feature?  Thank you.

  

  Wow. Just hours after my last answer, Adobe has released 2015.1 Photoshop, which includes an option convert to sRGB in the export as dialog box. So, if I'm right about the cause of this problem, just update to this new version and you can ignore my previous suggestions. All you have to do in Photoshop 2015.1 is to select the new option convert to sRGB and colors must be consistent when exporting.

  

• Computer crashes when you use the RunAs service.

  The computer stops responding completely after using the RunAs service. Microsoft Word hangs intermittently so. I checked for bad RAM and malware. I think an OS reinstall will fix this problem. It is Windows XP SP3. It's a Dell.

  Hello AMD_64,.

  Have you had recent virus infections?
  If so and they were correctly deleted, on-site upgrade or reinstallation of the operating system may be your best option:
  http://support.Microsoft.com/kb/978788

• "Driver not installed successfully", the error message when you use the new MP3 player.

  I recently bought a Sony Mp 3 (model NWZ-E384) Player.

  When I connect the USB I get an error message will appear in the lower right corner on the screen saying "driver not installed successfully.

  Why am I seeing this? Better yet, why am I this problem? My previous Sony Mp3 worked fine with Windows 7.

  Is there a round work to install the device driver on my PC?

  Thank you very much

  Ian

  Don't know if this helps Sony - https://ca.en.kb.sony.com/app/answers/detail/a_id/42390/c/65, 67/p/57784,59687,59925,80740 / (from their support pages for the NWZ-E384 - http://esupport.sony.com/CA/p/model-home.pl?mdl=NWZE384&template_id=1®ion_id=3&tab=howto#/howtoTab ).

• When you download the new Firefox, he did the preferences Options appear in the tabs. where is the option to make a pop-up window?

  In previous versions of Options under the Tools Menu of Firefox window was a separate Firefox window. With the new update they put in the tabs that majorly clutters the space and it is difficult to go back to what I was already looking upward. Y at - it an option to the Options window to a pop up or do I have to install a previous version of Fire fox?

  Hi, you can go back to the old window Options by: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.preferences.inContent and double-click on it to change the "value" from true to False, taking care to not to change what anyone else. You will then need to restart Firefox.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• MAC address error when you use the New-VMHostNetworkAdapter cmdlet

  I try to use powercli to set up networks for a new 5.1 esxi.

  I get the error:

  The MAC address is not valid or is not in the range valid 00:50:56:00:00:00 - 00:50:56:3F:FF:FF

  The script I use:

  [CmdletBinding()]

  (Param

  [Parameter] [ValidateNotNullOrEmpty()] [string] $FQDNHostNaam,

  [Parameter] [ValidateNotNullOrEmpty()] [string] $IPManagementNetwork,

  [Parameter] [ValidateNotNullOrEmpty()] [string] $SubNetMask

  )

  $VSwitch = New-VirtualSwitch - VMHost $FQDNHostNaam - name vSwitch0 - Nic vmnic2, vmnic3

  New-VMHostNetworkAdapter - vmhost $FQDNHostNaam - Portgroup Management Network - VirtualSwitch $VSwitch IP - $IPManagementNetwork - subnet $SubNetMask mask - ManagementTrafficEnabled: $true

  This creates the vSwitch, but runs into problems when calling to New-VMHostNetworkAdapter. It gives me the above error.

  Anyone?

  And did you try with go seek the portgroup first?

  $pg = get-VirtualPortgroup-name of the "network management".

  New-VMHostNetworkAdapter - vmhost $FQDNHostNaam - Portgroup $pg - VirtualSwitch $VSwitch IP - $IPManagementNetwork - subnet $SubNetMask mask - ManagementTrafficEnabled: $true

• At first 205, 1 error code when you use the new user profile

  Hello

  I use Windows Professional 8.1 with CS6 installed.

  Now, I've decided for CC, but as several other users, I am still not able to install it!

  On my admin account, I get the error code 205 trying to launch CreativeCloudSet - Up.exe.

  I have read a lot of similar messages and tried everything I have found, for example create a new Windows - this broughtt me just admin user profile somewhat further than installers closes a bit later with another error code (1).

  My PC is a Quad processor 2.4 GHz, 8 GB of RAM and a 512 GB SSD - technical limitations (I figured out can be indicated by the error code 1) should not be a problem!

  And it is not yet possible to file a mail to Support Adobe as there only the cat and the phone from MO-FR 9-17 h-it's ridiculous...

  In any case - why is there not more simple - the download links for the Apps?

  Obviously, Adobe seems not to be able to provide installers work - CC this is absolutely crap as I am not able to use it!

  I would be really grateful if someone who had / has the same problem (s) would have found a solution - and support pages - please no standard link to fake Adobe!

  Thank you in advance and best regards

  Carsten

  Complete all Adobe processes from the Task Manager.

  Open the c: drive and navigate to C:\Program Files (x 86) \Common Files\Adobe.

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Navigate to C:\Program Files (x 86) \Adobe.

  Open the Adobe folder and if necessary remove Adobe Creative Cloud folder.

  Then try to install creative cloud desktop, if you get the error code 205, follow the previous steps again and delete these folders.

  Then see link below:

  Persistent error 205 (Win 7) during the installation of Creative Cloud Desktop

  (The link above is not dummy link, I just post other steps in this post)