my computer freezes when I use the network.

Similar Questions

• My computer freezes when I use the new Firefox 4 v

  I have restored all the facilities at an earlier point, but I can't open Firefox! V 3.6.15 is installed, but it does not open when I click on it! I find the link on the start menu and under programs, but none of them starts when I click on them. That's happened?

  If you want the previous version, use instead of this link: Download Firefox v3.6.16

  Otherwise, the procedure is the same.

• Satellite A500-1GL: it is advisable to remove the battery when you use the network

  I know this is a silly question but its actually something I know not so thought I would ask.

  I almost always plug my laptop into the supply line (satellite a500 1gl)
  I was wondering have you actually keep the battery installed even when using the electrical network.
  Or is it really advisable to remove the battery when you use the network?
  I didn't know if the battery should always be in place.
  Thanks for your help
  Torti

  Hello

  A few years ago it was recommended to remove the battery of the laptop if the AC adapter is plugged. What keeps the constant charge battery
  New age of batteries are better you can leave the battery in the Bay it s ok and it should not affect the performance

  However, sooner or later each battery would die it s only a matter of time, you know

• Safari freezes when I use the button "share" after OS updated 10.11.5

  Since I upgraded to OS X to 10.11.5 I can no longer use the ' share' button as it freezes Sarari. If Safari is open in multiple windows, it freezes only the active window. Pls does anyone know a fix?

  10.11.5 - Safari 9.1.1 - MacBook Pro OS (retina, 13-inch, mid-2014, 2.6 GHz Intel Core i5, 8 G 1600 MHz DDR3)

  Hello..

  Safe Mode boot removes the system caches can help after an update.

  Follow these steps to start in safe mode.

  Start or restart your Mac.

  As soon as you hear the startup tone, hold down the SHIFT key.

  Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Then launch Safari and try to use the button share.

  On Safe Mode

• Losing Internet connection, desktop freezes when connecting to the network adapter is being reset

  Hi, sometimes when I wake up my computer and try to access the internet I get a message that I am not connected to the internet, and the page cannot be displayed.  Then, when I click on the message to solve the problem, when it gets to reset the adapter connection area the computer freezes.  I have to turn the computer off and restart and it usually solves the problem the first time.  How can I solve this problem?  Thanks in advance.  (The Office is a HP 2009 m)

  Hi bkgreatdane,

  Thanks that's exactly the information that I need. Here is a link to the driver for your device Realtek. Download and install this and let me know how it goes.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=PV-78245-1&CC=US&DLC=en&LC=en&os=4063&Product=4147103&sw_lang=

  Thank you

• Computer freezes when I connect the "rocket" sanza

  I recently bought a modernised 8 GB Saza Fuze sellout.woot.com.  When I plug it into my laptop that is running Windows Xp with sp3 the entire computer freezes.  When I unplug the laptop computer UN is "rocket" freezes.  So I tried to change auto to DPW, always the same result.  Then I tried MSC and that no longer works.  I then tried a desktop computer running Windows XP with SP3 and this computer has frozen too with all the settings and unlock when you unplugged.  Then I tried a third computer running windows Vista and the computer did not freeze but the computer does not see the mp3 player.  I tried all automobiles, MTP and MSC, and none of them worked on the vista computer.  During all tests when I plugged the mp3 player he sat there and load. He makes no attempt to connect to computers at all.

  Welcome to the undependability of woot. Send it back. You've done enough troubleshooting.

• The computer hangs when you use the DVD player

  Whenever I am playing a DVD, any DVD playing software that I use (Windows Media Player, Real Player, PowerDVD), the DVD plays fine until I move my mouse... then the computer freezes immediately. CTRL + ALT + DEL doesn't work. I have to use the power button to turn off the computer.

  I updated the DVD drive device driver; still crashes.

  I have a Dell Optiplex GX 280

  Windows XP SP3

  DVD is a teac dvd + rw dv-w58e

  
  

• RoboHelp 8 runs slow when you use the network drive...

  I have several users at my company who improved RoboHelp X 5 RoboHelp 8. They report that when they are working on projects that are located on a network drive, RohoHelp running very slowly (which never seemed to happen before with X 5). I read on several forums that RoboHelp must be used with projects that are on the local drive, but I can't find any formal recommendation to Adobe about it, or have no explanation as to why the network drive doesn't work well, I found. At Adobe all officially commented on it, and no one knows why the performance of the network drive is bad? Is there anything that can be done to allow my users to keep using their network without the poor performance? Thanks in advance for any help you people can provide, I'm stumped.

  Hello and welcome, Robo_Newbie

  You're about to become real Robo_Oldie fast

  Your projects RoboHelp MUST live on a local drive. You can archive them on a network, but NEVER actually open and change while they are on the network.

  The two reasons most people incorrectly assume that they should be on the network is because you want to share with other authors and you want to back up in case your hard drive goes down. These are valid reasons, but it does not work because the. DPC (a cache of the Access database file) usually becomes corrupt - not to mention latency LAN-related performance problems.

  Until most of us do is either use the free RoboSource Control that comes with RoboHelp or establishing a manual routine to copy your current job to a LAN for more safety and establish a routine with the other authors who will be working on what, when.

  Sorry to break the bad news. That is the reality.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  www.showmethedemo.com

• Computer crashes when you use the RunAs service.

  The computer stops responding completely after using the RunAs service. Microsoft Word hangs intermittently so. I checked for bad RAM and malware. I think an OS reinstall will fix this problem. It is Windows XP SP3. It's a Dell.

  Hello AMD_64,.

  Have you had recent virus infections?
  If so and they were correctly deleted, on-site upgrade or reinstallation of the operating system may be your best option:
  http://support.Microsoft.com/kb/978788

• Code 10 in Device Manager when you use the network adapter

  Type: ECS (Microsofot)

  Teredo Tuneline Pseudo-Interface

  Problem: could not start. Code 10

  Please, can I get help on how to fix it?

  Original title: NICs (Teredo Tuneline Code 10)

  It is not necessary to the Teredo Tunneling Pseudo-Interface until you start to need to use IPv6 - which may not be for years.

  Right-click on it in Device Manager and select Disable.

  Or open an elevated command prompt (search > cmd > right click Run as administrator) and type

  netsh int teredo set state disabled

  See http://www.sevenforums.com/network-sharing/46575-teredo-tunneling-issue.html

• My computer crashes when you use the Adobe reader on Windows 8.1 XI

  How can I solve this problem?  Where should I start?

  This is another program that has been installed recently and that has caused the problem.  I had to restore the computer from a previous point to get the problem cleared up.

• 6 s iPhone crashes when you use the keyboard

  Hi guys

  My iPhone (iOS 9.2.1) 6s freezes when I use the keyboard, doesn´t question in what program. After about 10-15 seconds to stop the gel, but only until I have started typing again. The only why to solve the problem is to "quick restart" operating the phone down the sleep and home button and release the home button when the screen goes back to the home screen. I ve already searched the net and tried several solutions, without any effect:

  Full reset

  Reset

  Disable iCloud for documents

  Disable third party including the emoji keyboard keyboards

  My best guess is that the problem has something to do with the timing of RAM or iCloud phones somehow...

  All the ideas!

  Best regards

  Mads

  Hi Samzonite,

  I understand that you are having problems with the keyboard on your iPhone. Let's see if we can get that worked.

  Based on the diagnosis that you have done so far, it seems you need to restore your iPhone and set it up like new. This will allow you to isolate the problem to sync your content back plus one. Take a look at the article below for more details on this subject.

  How to clear your iOS device and then set up as a new device or restore from backups
  https://support.Apple.com/en-us/HT204686

  Nice day

• T60 crashes when you use the touchpad or nub...

  T60p, Windows Vista business, ATI, 4 GB. Freezes when I use the touchpad or the node, I removed the palmrest reader / fingerprint of the machine, move essentially freezes. Replaced PR/FP reader, removed keyboard, used the touchpad freezes. Works perfectly with a USB mouse. Finally got through the package Index Server, but bad battery will not let me complete the download of update of the BIOS. Updated everything, the drivers/Windows, reformatted the entire system, all started as if news of the plant. Sometimes it will not make it through the WIndows progress meter.  Any ideas?

  BATTERY FLAT! Removed the battery dead, performed a flawless, to replace the battery, frozen... Who would have thought?

• My computer can not VAT registration and access the internet when connected to the network [secure] through wireless.

  Original title: fix problem 'local only' what is wireless.
   
  -My computer is a HP Pavilion dv5, running windows vista edition Home premium

  -My computer can identify and access the internet when connected to the network through a cable.

  -My computer can identify and access the internet when it is connected to the grace wireless network [without warranty].
  -My computer can't identify [unidentified network] and [room only] internet access when it is connected to the [secure] grace wireless network?
  -Other information systems, identify and access the internet when it is connected to the [secure] grace wireless network.
  -J' confirmed the network, try password works in "safe mode with network", manually configured (TCP/IPv4) using a connected computer.
  S ' Please, I'm desperate and in urgent need of help.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point:
  http://support.Microsoft.com/kb/928152

  Method 2: Uninstall and reinstall the network adapter drivers.

  Follow the steps mentioned.

  (a) click Start, right click on computer.
  (b) click on properties, click on Device Manager
  (c) expand the network card, right-click the wireless adapter option
  (d) click on uninstall
  (e) now go to your computer/wireless device manufacturer's website, download the updated drivers and install them.

  Follow the below mentioned article:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you