My computer is a 64-bit windows 7, but works in 32 bit?
My computer is a 64-bit windows 7, but I just noticed that, in the "dxdiag" (DirectX Diagnostic tool), he said that my computer is running in 32-bit. Im not run other programs that might do this and it happens everytime I restart my computer. It is causing me not to be able to run an essential program for my dish United because they have to be 64-bit.
That's why I asked the question to confirm rather than to assume! The properties page is the final count for the version of Windows
When I run DxDiag on my system is the o/s listed 64-bit in the system information panel but it's the DxDiag itself which is in 32-bit code by default. What I get is a button to run 64-bit DxDiag.
This command will force DxDiag to start in 64-bit c:\Windows\System32\dxdiag.exe 64 bit but what led you to run DxDiag in the 1st place, what errors are getting you Maya?
Maya 2014 also has a very limited range of graphics cards is supported, some AMD over-pants, higher spec Radeon HD, NVidia Quadro and GTX which should be DX11. What are you running?
Tags: Windows
Similar Questions
-
in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?
Perhaps because Acrobat 8 is not compatible with Windows 7 or 10.
Friday, October 9, 2015 at 22:11, thosdelaney [email protected]>
-
my hp 4100 series all-in-one does not work on my windows 7 but work fine on my xp computer why
my HP 4100 Series 4100 all-in-one DOES not work on my windows 7... but worked fine on my xp computer and a ruin my driver not compatible?
You must download and install the appropriate drivers for your version of Win7 from this link.
http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29118&prodTypeId=18972&prodSeriesId=83436&cc=us
I hope this helps.
-
Kundali 2002 is not running Windows 7 but worked on Windows XP.
I have the official software of Kundali 2002, earlier it was working fine with windows XP but is not running in windows 7, I tried to solve the problem by compatibility feature programs but error receives that program is incomplete.
Hi Nitin,
Welcome to the Microsoft community where you can find all the answers related to windows.
According to the description, it seems that you can not install Kundali 2002, this could be either due to another application is originally the installation.
I suggest to perform a clean boot, and then try to install Kundali 2002 compatible mode and check if it helps.
Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.
How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
Note: once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.Note: If the problem persists then I recommend you contact the factory program for more assistance.
If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.
-
Recently, we had the updates below...
VS 2005 for VS 2010
.NET framework 2.0 to 4.0
Infragistics 8.2 to 11.2 (controls)
OS - Windows XP to Windows 7
After the updates above, MSWinsock.ocx created problems with windows 7 that worked Flory with windows XP. Then, we solved this known issue (by registering as an administrator). Basically, we use MSwinsock.ocx for the purpose of generation/report view. Now after you resolve the issue of registration MSwinsock, reporting works very well for VS2005/.net Framework 2.0/infragistics8.2 in machine windows 7 but it does not with VS 2010/.net framework 4.0/infragistics 11.2 in the windows machine 7. Is there something that we are missing to make this work in VS 2010 as well?
Hi Renon,
I suggest you to post the question on the forum of Visual Studio support on the link below.
http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio
Feel free to write us if you have any related issue of Windows. We will be happy to help you.
-
My computer crashes and restarts with windows xp but it does not occur with any other OS
When I use windows XP, 2000, ME, 98 in my computer (Dell latitude D600) it crashes and restarts all of a sudden. But when I installed winodws vista, 7 or ubuntu it will never happen. I thought that the problem could be drivers, so I ran my computer only with windows XP, without installing any driver, but it happens again. I already send my computer to dell and they changed everything in the computer, but I still get the error. What can I do to identify and solve the problem?
Hello cocodrilo,.
Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP, 2000, ME, 98 multiboot and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en/categories/
Thank you
Jack
Jack
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
When I try to open the Ebay page does not open fully text appears
Hello, this may be due to the following ms update: http://support.microsoft.com/kb/2965142/
-
Acer aspire E5-575g53re have installed windows 7 but works only usb before starting.
Have installed windows 7 x 64, but no usb does not work after you start. The lds of unknown peripheral hardware is:
IUSB3\ROOT_HUB30 & VID_8086 & PID_9D2F & REV_0021 & SID_10941025
IUSB3\ROOT_HUB30 & VID_8086 & PID_9D2F & REV_0021
IUSB3\ROOT_HUB30 & VID_8086 & PID_9D2FI tried to install the BU 3, 0_intel, but I got this computer does not meet the minimum requirements
for the installation of this software.
is windows 7 update?
have you installed the chipset drivers Intel?
run software update Intel drivers and check the update or specific drivers:
-
old program
Hello, my name is Larry. First thing you need to know is that I'm not a computer wiz, but I hope you can help me. On our old computers with windows 95, we used to use a program called HVAC calc/more great program. Then we got new computers with windows xp and this old program won't work on it. So I contact the hvac company, the person who made this product had just died, and the program went with him. Y at - it drivers, or else one do this program works on these wiith xp computers
Thank you
Larry Fischer
E-mail address is removed from the privacy *.
* removed *.
Hello
I suggest you to install Hvac calc/more in compatibility mode and check if the problem persits. Follow the steps in the link:
-
I have the CD and I found the patch, so I'm supossed to be able to install PSP. But it says that I have the cd installed first to use the patch to make it work, but it won't let me download the CD at all. I'm not upgraded to windows 7 from xp (which Yes PSP works on) I got a new laptop. It gives me a [Error 1606. Could not access network location % APPDATA%\. Message. Someone can help me with that I have enough space and have had it since 2001. Download windows xp with service pack 2 on my laptop which has windows 7 Professional already installed?
It does not work in win7, but;
Since you have win7 pro, you can install and use Windows virtual XP and install the program in this environment
http://www.Microsoft.com/Windows/Virtual-PC/
See also
http://www.SevenForums.com/virtualization/32942-i-got-XP-mode-display-24-bit-color-integration.html
-
My microphone does not work in windows 8, but worked fine on windows 7
The microphone on my laptop ASUS A55D does not work in Skype or in the Control Panel, when I select the option "listen to this device. It worked fine in any application earlier on windows 7 and I never needed to check if it is configured properly, nor did I have to install any kind of drivers to make it work.
Help, please. A response would be appreciated.
Check the site of Asus for Windows 8 audio drivers * for your laptop. I can see books similar to the A55D model, but not this exact model number. If you follow the advice of close the download link (I'm looking at that says uninstall the old audio drivers before installing new) download and install the drivers.
Please see:
http://support.asus.com/download/options.aspx?SLanguage=en .
Alternatively, you can directly ask Asus for advice:
http://vip.asus.com/VIP2/Services/TechQuery?lang=en-us .
* Make sure that you choose the drivers 32 or 64-bit according to your version of Windows 8. To find out if you are running Windows 32 or 64 bits 8, press The Windows Logo key + X on your keyboard, and then select System. Now look where it says, "System Type".
-
Host process for windows has stopped working
Today, I got an error with no activity on the computer. "host process for windows services stopped working. Immediately after this message when I clicked on the Panel of the window was empty. Also, my printer stopped working. I checked the day windows journal and noticed that the last 3 weeks of auto updates had failed for some reason any. I have tried almost everything on the site of MIcrosoft to fix this problem without success. I even tried to do manual downloads of Vista SP2 but this faills and.
Any advice?
Hello
Try to install an update of:
http://support.Microsoft.com/default.aspx/kb/940520then run Windows update.
I hope that helps!
-
WINDOWS XP Home Edition has BEEN ACTIVATED FOR YEARS AND IT APPLICATION to BE REACTIVATED AND NOT ACCEPT THE KEY NUMBER. I tried to activate it online and by phone, but I've only had the computer records. I bought Windows 7 but must recover my files on the C drive. What should I do?
original title: Activation QuestionHi, Mrkoko39,
How to activate Windows XP
-
We try to upgrade Vista Home Basic on an Acer Windows 7, but does not because there is not enough space on the hard drive C. I have another drive that is empty, hard drive called D data and will not go to it. What I can do. I just spent $ 125 for this upgrade. Thank you
original title: try to upgrade to Windows 7Hello
you are posting in the wrong forums
These are some Vista Forums
You can read this information to see if your machine is compatibile Windows 7 and repost in the correct Windows 7 forum (link below)
so eager to upgrade to Windows 7, it will depend on if the manufacturer of your computer/laptop has windows 7 drivers available for your computer/laptop as to whether Windows 7 will work properly on your machine
check with them
and read this
Windows 7 upgrade advisor
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15
Windows 7 system requirements
http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements
Windows 7 upgrade paths
http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx
_____________________________________________________________
and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all
-
Host process for services Windows has stopped working and was closed.
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
How to fix the "host process for windows services stopped working and was closed" on Vista
http://www.online-tech-tips.com/computer-tips/host-process-for-Windows-services-stopped-working/
I hope I could help
Maybe you are looking for
-
External hard disk is NOT appear
My 2 TB WD Passport appear on my desktop. But when I open the Finder it is not. This causes many problems because I can target is no longer this drive when I save files or open files, or download files from that drive. I restarted my computer at leas
-
GetTableCellValue "the control is not of the type expected by the function.
I hope you can help me to find out why GetTableCellvalue is a failure.I don't get "the control is not of the type expected by the function.int calPanelId = LoadPanel (PARENT, "gui_main.uir", CAL_PANEL);Point p;p.x = 1;p.y = 1;Double val = - 1.0;State
-
I am still running XP. My PC did an automatic update to load the SP3. When I did, and after rebooting, none of my browsers would work - I couldn't access the net. (I use IE 7 and Firefox). I called my ISP technology support and they concluded my brow
-
Reset the link password Hotmail account does not work.
Original title: reset password link does not work! Hello My hotmail account has been blocked, I asked for a link reset password to my e-mail from work, password reset link, I received doesn't work, it sends me to a page that says "there is a temporar
-
IOM has a problem with this month, there are... I can't save my contacts in my phone book... Whenever im trying to save it imy phone is just freezing and will not turn off, can anyone helpo me with this problem... Thanks in advance...