My computer keep beep, sayplug in battery adapt, it is plugged. What can I do?
I can't stop my computer from a sound signal. He says to plug the battery, but it is connected to the computer. Its ruin my computer each time that it beep. WHA I can do? My battery does not charge.
Hi AW-7,
Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).
How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not the adapter to recognize the AC).
The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.
I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this situation, you can turn off to avoid the beep (even though I'm at a loss for which is why "it messes up your computer" when it does like all he must do is beep). In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.
Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.
I hope this helps.
Good luck!
Tags: Windows
Similar Questions
-
I have all the Adobe Creative Suite with all the programs installed on my mac, I bought a new mac and go to sell the need for others, but I have to get the programs on the new computer and I also lost the serial number for it, what can I do about it?
-
I want to record a speech on my computer in order to make a copy. How and what I connect
Hi Jack,
The first thing you need is a microphone. Most all laptops have a built-in. Desktop are not. You will need with a USB or 3.5 mm jack plug. They have very widely in quality, but the voice didn't need anything too fancy. You can also get an integrated with headphones, you might find very convenient.
Once connected, you will need to enter the 'Sound' applet in Control Panel to configure it. Simply click Start, then Control Panel and then heard.
Click reording and you should see a listed microphone. Select it and click on "configure". This will bring up the speech recognition tools. You must first configure your microphone to make sure that it works correctly. You can then select "Start speech recognition" and follow the steps for Windows "Teach" to recognize your voice. He learns that you're going to recognize your individual speech patterns.Enjoy! Mark <> Microsoft Partner
-
Why does my computer keep with 30% remaining battery?
Whenever my MacBook Air gets to between 20 to 30% of its power, it stops. It is about 3 years old. Why is this happening? It is used to stop only when he was close to 0%.
Thank you
Ian
Check the cycle country > Determining battery cycle count for portable Mac - Apple Support
-
need help, my xp keeps shut its self off when I start it, it beeps, just before his stop, I can't even keep long eough to retreve my files and photos, can someone help me without sending a link that may be expensive?
I would like to fix and get that all saved m ais if certain wishes to walk but step by step i, he can try it.
Thank you.. loismay
Hello
· Since when are you facing this problem?
· Remember to make changes to the system?
· This happens at random, or whenever you are working with any application?
· Once the system shuts down, it restarts automatically or you have to restart the system?
· Do you have a moment to your computer automatically stop?
I suggest to check the event viewer for error logs and let us know if you notice errors. Follow the steps mentioned in the article given below to check the logs in the event viewer.
Procedure to view and manage event logs in Event Viewer in Windows XP
http://support.Microsoft.com/kb/308427
Method 1:
I suggest to start in safe mode and check if the problem persists.
Step 1:
Follow the steps mentioned below to start in safe mode.
a. restart the system and then keep tapping F8 until you reach the start menu.
b. Select safe mode from the list and press ENTER.
If the problem persists then in safe mode, I suggest you to do a clean boot. Follow step 2.
Step 2:
Follow the steps mentioned in the article below.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
My computer keep asking for the BPD and Tryapps software. What it means?
Keep receving the message that the system needs a software of SPF and Tryapps. This prevents the instalatin of a new printer tha
Keep receving the message that the system needs a software of SPF and Tryapps. This prevents the instalatin of a new printer tha
Ask HP.
"trayapp" is what I think you see. You essentially get rid of all installed HP software previously.
-
I can not connect and it says failed to connect to the profile.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
my check of battery hp stoped workin. What can I do to get it to start warking?
my hp stoped working battery check. How can I start working.
Hello
I suggest that contact you HP support for better help.
See also: http://h20239.www2.hp.com/techcenter/battery/battery_ts.htm
-
Although even I have now a new computer, still I'd like having my old 1 as a back-up if this 1 crashes ever, there is only 1 account on it and I forgot the password of admin for it. I tried to restart it in safe mode if all goes well to bypass the password admin start-up section, but surprise! always had a password and when I type the password reset link under the password box that he told me that I need a password reset disk where can I get 1 of them and I can get very cheap 1 because I am disabled and cannot work more:(si im limité sur combien dépenser chaque mois.) It also requires a USB and not a disc, the brand and the model is an Acer Aspire 5610 with windows vista home premium.
Hello DOWG pepper,.
Unfortunately Microsoft forbids us to give instructions on how to work around/hack admin password. There are ways, but we are not allowed to disclose. As this is an old PC, maybe the best thing for you to do is re - install windows on this computer.
On the reset disk, you will need to create one of these yourself by opening the control panel and clcikcing on user account icon. In user accounts, look to the left of the window and you will see a list of tasks. The first is create a reset disk.
This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.
John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com
-
my computer won't read or recognize CD or DVD. What can be the problem?
When I try to install a software, play a CD or DVD, nothing happens. I hear a few clicks and a humming noise, but then nothing. I have the default to auto-play. The instructions for the software says to follow the instructions on the screen, but they never show. Is this a driver problem, and if so, how can I solve this?
Hello
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
my computer won't let me go on my wireless connection, what can I do
I can't turn on my wireless connection, I use a laptop Amilo. When I using windows, he's saying that windows cannot find not another connection please help me.
Hello
Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site
go to their website and look for a driver and software download section
Enter your model number for the last look drivers vista then download and install
-
"Activation key is not valid" when you try to reinstall Windows after a crashed hard drive. I have a disc of Windows 7 Home Premium and I am using the product key from the back of a computer (it was originally an installation of Windows 7 Home Premium). Why do not match the keys, and what I have to report the earlier installation somehow is no longer active before attempting to reactivate?
Skip entering your product key Windows 7 and complete the installation.
When you reach the desktop, click Start, right-click on computer
Click on properties
Scroll down to the Windows Activation
Click the link x days before activation.
Click on the link that says: "show me other ways to activate.
Enter the product key
Click next
Select the Activation of the phone
Click Next when you enter your key page
Select your country
Click Next, call the number listed
Be sure to explain your situation to the Appeals Officer.
Provide the installation generated when ID requested by the call agent
They give a confirmation ID in return, enter it
Click next to complete the activation.
or
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
I can't change my password. When I go to the screen changes and follow the prompts it returns me back to an old AOL address
Hello
· What password, you try to change?
· AOL password account are you referring?
If you try to change the password for AOL, you can follow this link & check if the problem persists.
http://help.AOL.com/help/microsites/microsite.do?cmd=displayKCPopup&docType=kc&externalId=223103
Hope the helps of information.
Please provide us with more information about the issue so that we can help you further. -
Can someone help me here, I paid for a full year and now it's on. I have no need nor do I wish having more then one year. I tried to cancel my member ship but he is not totally let me... In addition, I can hardly content to support...
Hello
Please contact cat Adobe support to cancel your subscription, click on the following link and click on chat
-
Frequently, my computer stops and restarts all am surfing the net. What can I do?
Hello
1. what type of internet connection do you use? What is a wired or wireless?
2. you receive messages or error codes?
2. did you of recent changes on the system?
Step 1:
You can check the following items and check if the problem occurs in safe mode with network.
Start your computer in safe mode
Startup options (including safe mode)
Step 2:
If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
Maybe you are looking for
-
Satellite A210 PAESL: where to find XP drivers
I have a Toshiba Satellite A210 paesl 14It came with a windows vista recovery cd.I now want to get rid of vista and install xp, but where can I get the drivers, I need forinstens for internet modem and so on...I can't find them on the recovery cd?Is
-
It is not an admin or anti virus problem. Any ideas?
-
Can sharp square edges of a drawing painting be sharpened once the drawing has been expanded?
Is there a way to smooth and refine the irregular paint drawing contours where it will necessitate the extension?
-
Network connection is down...
I ran all spyware/malware notables or integrated there utilities programs: HiJack This, Adaware, Advanced Sys Care, Comodo, CCleaner, etc.. fix the TCP/IP stack. tried several browsers. even restored my system way before the problem started. Does thi
-
Cannot adjust the brightness of the screen after the new installation of Windows 7
I have a Pavilion dv2945se notebook. I have completely updated the Nvidia geforce 7150 m drivers. My laptop came with Windows Vista Home Premium 64-bit, and I did a new install of Windows 7 Home Premium 64-bit. I can't adjust the brightness of the di