Frequently, my computer stops and restarts all am surfing the net? What should I do?

Frequently, my computer stops and restarts all am surfing the net.  What can I do?

Hello

1. what type of internet connection do you use? What is a wired or wireless?

2. you receive messages or error codes?

2. did you of recent changes on the system?

Step 1:

You can check the following items and check if the problem occurs in safe mode with network.

Start your computer in safe mode

Startup options (including safe mode)

Step 2:

If you do not experience the problem in safe mode with networking, you can perform a clean boot and check.

A clean boot to check if startup item or services to third-party application is causing this issue.

You can read the following article to put the computer in a clean boot:

How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

Tags: Windows

Similar Questions

  • Hi, I have a toshiba tecra 5000 I downloaded updates when they try the third phase of the update download the computer stops and restarts.

    I'm a newbie with this stuff so bear with me.  I updated charges, when they get to the third stage of the download the computer stops and restarts. I tried all types of restart, the system is unable to connect. now the hard drive light on the face of the computer won't lite, the laptop won't even consider itself restart any ideas

    Hello

    1. the updates you downloaded?
    2 a successful installation of updates?
     
    Follow these methods and check
     
    Method 1:  If you are still not able to start the desktop computer, you can rename pending.xml and check.
    Renaming or removing the pending.xml file booting from the Windows Vista disc.
    a. Insert the installation disc.
    b. restart your computer.
    c.Press any key to load the disc.
    Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings.
    d. choose your language settings, and then click Next.
    e. in the System Recovery Options menu, click command prompt
    f. at a command prompt, type the following command below and press ENTER
    CD C:\windows\winsxs
    g. now, type ren pending.xml pending.old , and then press ENTER.
    Restart the computer and check.
     
     
    Method 2:  Once you are able to boot to the desktop, follow this method.
    An update is not installed successfully when you try to install the update in Windows Vista and Windows 7:
    http://support.Microsoft.com/kb/949358
     
     
     
    Thank you
  • Recently installed Windows 7 now cannot open any games Big Fish when I try to open the game get error message computer stops and restarts

    Cannot open the computer game stops and restarts

    Check that the Big Fish Games support the site http://bigfishgames.custhelp.com/app/home to see if it's a known issue.  I hope they don't send you here :-)

  • window will stop in less than a minute, stops and restarts everytime I use the computer

    message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer

    Hello

    ·        This happens randomly, or when you open any application on the system?

    ·        Since when are you facing this problem?

    ·        Remember to make changes to the system?

    Check the event viewer for the newspapers and let us know. Follow the steps mentioned in the link below.

    Open event viewer

    http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

    What are the information contained in the logs of the event (Event Viewer)?

    http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

    Method 1:

    Step 1:

    I suggest you to check in safemode, if the problem persists. Follow the steps mentioned below.

    a. restart the computer and keep tapping F8 until you reach the start menu.

    b. Select safe mode and press ENTER.

    Step 2:

    I suggest you do a clean boot and see if the problem still occurs.

    To perform a clean boot follow the steps mentioned in the link given below.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Follow step 7 to start the computer in normal startup.

    Method 2:

    It may be there is a scheduled task on your system. Check in Task Scheduler and if there is no scheduled tasks then, remove and check if the problem persists.

    Automate tasks with Task Scheduler

    http://Windows.Microsoft.com/en-us/Windows-Vista/automate-tasks-with-Task-Scheduler-from-Windows-Vista-inside-out

    Schedule a task

    http://Windows.Microsoft.com/en-us/Windows-Vista/schedule-a-task

    Thanks and regards.

    Thahaseena M
    Microsoft Answers Support Engineer.
    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • My computer is no longer able to connect to the internet. I can download updates of Windows and Adobe but not surf the net in the browser.

    original title: internet connectivity

    My computer is no longer able to connect to the ' net.  This ab took place two months ago.  I still get updates from MS and Adobe, but will not connect to any Web site.  I've tried wired and wireless.  All my other computers are connected again and the router and the modem seems to work properly.  This occurred after a windows update has been installed automatically while I was away and there was no restore points.  Other connectivity issues, the system works properly and I am connected to my local network, not just the internet.

    Hello

    You can follow below link that can help you to solve your problem:

    Reset Internet Explorer settings

    http://Windows.Microsoft.com/en-us/Windows-Vista/reset-Internet-Explorer-8-settings

  • Apple TV 3 frequently stops and restarts all streaming Netflix

    This happens at least once during a movie. After it restarts automatically, you must work your way to the content you were viewing and resume watching. It happens so often now that it becomes very annoying.

    I suggest to do a restore iTunes restore your Apple TV with iTunes - Apple Support

  • Computer stops and restarts continually when not in service.

    Even when I stopped it for the night, it will restart automatically back up? !!

    Hello

    Check your settings (BIOS/CMOS) - usually F2 as you start so watch the display - Wake
    On Lan, Wake on Modem and so on.

    -----------------------------------------------------------

    If you catch it the next time he awakens in issue this command:

    Start - type in the search-> CMD box find top - make a right click on - RUN AS ADMIN

    at the prompt, type in or copy and paste it

    powercfg - lastwake
    Press enter
    (space between g and -)

    -----------------------------------------------------------

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
    type of hibernation - see turn Hibernate on / off

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Problem stopping and restarting the computer

    Hello

    I searched for so long for a solution, until I decided to post a question here.

    Whenever I have shut down my computer (via Start menu / alt + f4) the computer off first and perform a restart immediately afterwarrds.

    Well, this is what happens ALL the time. My computer stops and restarts, until I am led the newspaper to the page. On the page (after ctrl + alt + del) to connect, I keep having the same problem after pressing the off button.

    It's extremely frustrating because I have two options:

    Leave my computer running in locked mode (allowing my computer to heat and drain its battery)

    or

    Force a stop down by holding the power button down (damage my computer system - directed to a page (for running normal windows not start))

    Here is my contact information for the computer and all the...

    Lenovo G400

    (Standard plug)
    500 GB WD hard drive

    Windows 7 ENTERPRISE

    If you need more details let me know, so I can help you.

    Hope to hear something soon!

    MBT

    In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

    If you have any questions do not hesitate to ask

    Please use the restart configuration.  This will reboot your computer 3 times then save your work

  • my computer dell laptop with windows vista does not recognize the battery what should I do?

    I have a computer dell laptop which will not recognize the battery what should I do?

    Contact Dell for hardware support.

  • Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

    Windows vista update 3 of 3 will not set up, computer continuously, stop and restart; Unable to access computer

    The link below has options to solve your problem of loop.

    http://support.Microsoft.com/kb/949358>

    04:17:0407/17/11

  • Stop and restart the cssd on all cluster nodes

    Hello

    Release our system to operate under linux Red Hat Enterprise Linux Server 5.3 (Tikanga) 2.6.18 - 128.1.1.el5
    Our ASM is 11.1.0.7.0 block of POWER 2
    Only ASM is clustered. Databases are not.
    2 cluster nodes (Clusterware 11.1.0.7.0)

    I have two questions:
    1. we need to stop and start the cssd (crsctl stop crs, crsctl start crs) on both our 2 nodes of clusters.
    In our test group, I stopped first the ASM and dbs all running on 2 nodes
    Then I got arrested and restarded the cssd on the first node, and then on the second node. What is the good order or procedure?
    I noticed after the cssd (crsctl stop crs) stopped the process "/ bin/sh /etc/init.d/init.cssd fatal" was always present. I waited for 30 seconds, but he was always there. Then I restarted the cssd (crsctl start crs) in any case. Why was the fatal process always there? It happened on both nodes. After you restart the cssd, I killed the "/ bin/sh /etc/init.d/init.cssd fatal" on both nodes. He was evidently reappear.

    in the event that we want to restart both nodes of the cluster, should 2 - I start by disabling the crs before restart the cluster of 2 knots (crsctl disable crs), and then turn it back on after that 2 linux servers are back (crsctl enable crs)?

    Thank you, man

    Hello

    So, for the closure of this thread, which is the appropriate procedure - for them stopping and restarting the cssd on the two cluster 2 node - among the two below:

    1 - do a "crsctl stop Sir' and then 'crsct start crs' on the first node. Then do the same thing on the second node
    2. make a "Sir crsctl stop" on both nodes. Then do 'crsct start crs' on both nodes

    I want to avoid is the two nodes start to restart because of the cssd.

    You can run 'crsctl stop/start' at the same time on both nodes or so as you want (1 or 2), no problem.

    If you start the clusterware on a first node and later the second node, just make sure that all services who were on the first node the second node have been properly resettled on the second node.

    Kind regards
    Levi Pereira

  • Explorer stops and restarts.

    Windows Explorer stops and restarts when I right-click on a file or a folder, or when I try to delete a file or folder. A window will appear: "Windows Explorer has stopped working. Windows is checking for a solution to the problem... ». Then another window will appear: "Windows Explorer restarts. This does not happen with all files and folders, but many. I can use a third-party program (sheets) to delete files and folders, but not to explore. I have recently installed Windows Live Mail, Photo Gallery and I replaced Norton Security with McAfee, but I don't know if the problem started after or before those. Says Windows solutions I check for updates but I have automatic updates turned on and I have all the updates.

    Hello

    What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
    on this machine, including those you have uninstalled (they leave leftovers behind which can cause
    strange problems).

    Did you use the McAfee removal tool to ensure that it has been uninstalled completely? If this isn't the case, it uses now.

    Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

    http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

    Norton is also known to cause strange problems with explore and Internet Explorer.

    ----------------------------------------------------

    Follow these steps:

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ==========================================

    After the foregoing:

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
    Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
    reference (if you have a small box at the bottom left - show for all users, then check that).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG then put a list of
    those here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out which files, key of registry and other objects processes have opened.
    What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
    each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to start automatically when you start your system
    and you log in. Autoruns also shows you the full list of registry and file locations where applications can
    Configure auto-start settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
    When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
    Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
    a program that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window
    Watcher says it all, reporting of any window created by running programs, if the window
    is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    ===========================================

    Vista and Windows 7 updated drivers love then here's how update the most important.

    This is my generic how updates of appropriate driver:

    This utility, it is easy see which versions are loaded:

    -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
    For each driver in the list, additional useful information is displayed: load address of the driver,
    Description, version, product name, company that created the driver and more.
    http://www.NirSoft.NET/utils/DriverView.html

    For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
    Control Panel - device - Graphics Manager - note the brand and complete model
    your video card - double - tab of the driver - write version information. Now, click on update
    Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
    Uninstall - REBOOT it will refresh the driver stack.

    Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
    with their own software and drivers and all other main drivers that you have.

    Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
    Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
    BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

    Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
    each installation.

    Always check in the Device Manager - drivers tab to be sure the version you actually install
    presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
    in particular that) so to install a driver - reboot - check that it is installed and repeat as
    necessary.

    Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
    manually by model.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
    Updates, that leaves about Windows updates but it will not install the drivers that will be generally
    older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
    get new manually if you wish.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • What is the difference between the stop and restart?

    What is the difference between the stop and restart?  I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor.  I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system.  Thank you in advance.

    Hello Jeremy_1976,

    Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.

    Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.

    A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.

    This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

    John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

  • automatic DHCP client, stop and restart

    Please help me

    in my network:

    DNS: 192.168.0.4

    DHCP:192.168.0.3

    each client problems: ""stop and restart automatic dhcp client.

    computer restart all of a sudden and when windows clent dhcp service stop

    Thank you

    Hi Shayan,

    For additional verification on that, we will ask for information. Your computer is connected to a domain network or home network? Please try the steps on this link: DHCP restarts.

    Brand of kindly as answer if this post responds to your request. Feel free to get back to us if you need further assistance.

    Kind regards

    Gilles Ova

  • HP Envy Phoenix, stop and restart suddenly

    I've had this computer for a week and every time that I turn on and sign in about ten minutes later just stops and restarts without any explanation.  I tried to disable automatic reboot in the Advanced section in the properties of the system, but it didn't fix it, and I can't find any other explanations of what is happening.  Any help would be greatly appreciated.

    Thank you

    Hello

    Just bought thisPC?

    Nice system. I have a 810-150se. similar to yours.

    I have zero tolerance for new products that fail shortly after purchase.

    Return it as soon as possible!

    Jaco

Maybe you are looking for