my computer's date changes automatically

Similar Questions

• my date changes from computer to the manufacturing date

  HelloW

  my computer's date changes automatically for manufacturing date (2007)
  Help, please

  Your computer has a place where the Date / time and the card motherboard chipset settings are stored.  It usually has a stack in order to keep these "stored" settings when the computer is turned off.  If the date is the date the manufacturer, then is can be an indication of the battery is now "dead".  You should be able to get his change easily because it is just like a 'attention' to change the battery.

• The computer's date and time does not change automatically

  I use WinsXP and have a problem with the clock at the bottom right. Every time I have on my computer the date & time is always 01/01/2005 12:00... Whenever I have to correct... Can you pls help me on how to solve this problem, because if the time if wrong my antivirus doesn't work...

  Original title: frustrating problem...

  You are in desperate need of a CMOS battery.  Read the manual or conteact the Lim for directions on how to replace it.

• my computer continues to change the date and time

  my computer continues to change the date and time even after I set it correctly. I am running windows 7 Professional. Thank you

  Hello

  ·         Since when are you facing this problem?

  ·         Did you the latest changes on the computer before this problem?

  Method 1:

   

   

  The date and time in the BIOS settings may be incorrect.

  Important: Change BIOS (Basic input output system) /(CMOS) complementary metal oxide semiconductor

  Settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  You can see this:

  
  Incorrect time is displayed on 64 bit versions of Windows 7 or Windows Server 2008 R2 after upgrading on-site

  http://support.Microsoft.com/kb/2001086

  Method 2:

   

  I suggest you replace the CMOS battery. If you are not comfortable with that, then I suggest you to contact the manufacturer for assistance.

• When waking from sleep, the date changes to 2029

  Sometimes when my computer wakes up from being asleep, the date changes until 2029.  The month and day are the same, but the changes of the year.  I then have to set manually the date, the automatically sync with windows server doesn't fix it.  Its really annoying because then my anti-virus thinks its out of date as well as the update of windows.  My internet browser also has security due to date problems.  I can not understand what causes the date change 2029!

  Hello Nevik09,

  A possibility is that the CMOS battery is out. Did you replace the battery to determine if it could be a cause?

  Also, take a look at this thread on Technet for another possible solution. http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/9d180368-35ee-4334-9cce-cd2b2c7f1f2a

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• X 360 HP spectrum: spectrum HP x 360 date change randomly

  I am the only person to experience the date change randomly a couple days before?

  I have reset several times and now time to update automatically off to see if it solves the problem.

  My first experience with Windows 10, so really not clear as to whether it's an operating system or device (e.g. issue with the Bios battery).

  Other/causes, anyone?

  Currently, as a configuration on delivery by HP...

  Found an answer/solution here (incorporated in the first post). I already reset my date of Windows, but when I went into the BIOS, it was always made two days ahead. I have changed the date of the BIOS, and then downloaded and installed the BIOS update on the page of software and the driver to the address provided in the first post. So far, the date has not changed, but it was about 12 hours, so we'll see if it holds.

  http://h30434.www3.HP.com/T5/Windows-10-expert-day-laptops-notebooks/date-being-reset-a-day-or-two-ahead/TD-p/5303098

• How to change automatic internet connection sharing network channel

  I really need to change my internet auto channel sharing, but it is not yet an option... Can someone tell me please how to change automatically!

  It is setup for internet sharing... This is a totally different configuration... You cannot use auto because your computer is now the router... but your computer does not have a scan wireless for unused channel capacity.

• every time that the computer shuts down, (IE Automatic updates), recent documents is empty.

  original title: recent documents: every time that the computer shuts down, (IE Automatic updates), recent documents is empty. How do I prevent this? Very frustrated Ruth

  Recent documents: every time that the computer shuts down, (IE Automatic updates or I turn off during the night) recent documents is empty. How do I prevent this? Don't know if the following has nothing to do with it, but - about 6 months ago I reinstalled XP, since then I have no sound and comes to the foregoing. Oh and to add, at the same time, I've changed hard drives up and down, which means that I have and that he had 2 hard drives.

  Very frustrated Ruth

  Hello

  Try the steps below to solve the problem.

  Caution:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  (a) open the registry editor and navigate to:

  HKEY_CURRENT_USER-Software-Microsoft-Windows-CurrentVersion------Explorer-advanced

  (b) save the key in a file. See the article of support upward.

  (c) the value of Start_ShowRecentDocs as a result.

  (d) value of 0 - list of my documents most recently opened is disabled
  Value 2 - list my most recently open documents is enabled

  Note: set the value to 2.

• My computer is no longer automatically recognizes all the devices inserted in the disks.

  My computer is no longer automatically recognizes all the devices inserted into readers, like a CD or SD card photo. Recently I bought a micro sd card for my phone, but when I insert in the USB port, it recognizes that no more. How to do that everything works again. I have XP Service Pack 2

  Hi Danny Bralski,
   
  -Did you change on your computer before this problem?
   
  Follow the steps listed in the order.
   

  Method 1: Check if the USB port is defective.

  If you connect a USB device to a defective port, the device will not work. Try connecting the device to a different port. If all USB ports are in use, disconnect one of the other devices and plug the problematic device into that port.

  Method 2: Check if there is a problem with the device.

  If you have another computer that is working properly, plug this computer to see if you encounter the same problem. If you have the same problem, there could be a problem with the unit.

  If you believe that your device is defective, contact the manufacturer.

  Method 3: Run the troubleshooter from the link given below:

  Hardware devices do not work or are not detected in Windows

• How to set or change automatic backup settings

  Original title: computer

  My computer makes a noise whirring of laborious struggling. I cleaned with care, but still, it looks like a car that won't start. I'm afraid he's going to die on me and nothing is saved as backup of the island is due this Sunday. Can I replace the Sunday backup in case he dies? Any advice on what has happened to my computer works very well. A bit slow but everything ok my chap of the computer is on vacation until next week.

  Hi Nicky,

  Please contact Microsoft Community.

  If you want to change the time of backup runs, in the time list, check the box for every hour of the day you want your backup to run. Clear the check box for any time that you do not want Backup to run.

  Select one of the following options:

  • Custom. Does not set a default time for the backup to run.

  For more information see set or change automatic backup settings.

  Also as you mentioned that your computer makes a noise, I suggest you check if all cables are tied up and the CPU fan is properly cleaned.

  Meet us, then we can help you further.

• Windows 7 change automatically mapped printers group policy print drivers

  What does Windows 7 change automatically print drivers for printers that are mapped by using Group Policy?

  Print server is 2012 using drivers v3.
  Group Policy is mapping using deployed printers (computer Configuration\Policies\Windows Windows\imprimantes) printers and is spread to computers
  Printers card fine to the computer with the correct driver that is on the print server, then after a few minutes changes Windows 7 driver to one that is not yet on the print server.
  I tested this settings, first as activated and pointing directly to the print server and now as people with disabilities

  Policy	Setting	Comment
  Restrictions point and print	Activated
  Users can only point and print to these servers: People with disabilities Enter the name fully qualified server separated by semicolons Users can only point and print to machines in their forest People with disabilities Security prompts: When you install the drivers for a new connection: Do not show warning or rapid rise Updating drivers for an existing connection: Do not show warning or rapid rise This setting only applies to the: Windows Vista and later versions If anyone has experienced this? Or have any idea why this is happening?

  Hello Ronnie Jordan,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  Windows 7 IT Pro category

  Hope this information helps.

• the computer is configured to automatically run programs at startup detected

  I have windows 7... computer running very slow when I start the pc, or even to open internet programs... don't have a full scan virus no nothing...

  When I check the performance he said: convenience store has made some changes to your system.try to try the task you were trying to

  do before.

  and she said then in a pox: problems

  the computer is configured to automatically start detectet and a yellow triangle with an exclamation point

  could you please tell me how solve the problem... thank you so much manual

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Peformance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Definition of custom alarm == &gt; changes automatically Green State?

  Greetings,

  I set two alarms for preventing me from certain actions (like opening a console to a virtual computer), that works. However the alarm also changes the "status" of the machine to "alert" until I have manually reset the alarm green or 'normal '. Is it possible to run a command that sets the virtual back to normal computer or even better, not change the State of the virtual machine to "alert" when an alarm is triggered?

  I know, it seems logical that this is not possible, but you never know.

  Thanks in advance,

  Bram

  If there is an alarm representing a State he should change automatically as soon as the alarm has disappeared. But if there is an alarm represents an event, why should he disappear automatically? By confirming the alarm, you show that you recognized.

  Open a console is an event, not a status. Try to set the status not to alarm but normal, vCenter should show nothing then, but maybe you get triggered action (if you defined one).

  If you keep it as an alarm or warning, you need to confirm.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  Mail app screen complete fillings of 27 inches. Cannot reduce it. Tried to restart the computer, but no change. All covered controls can then stop just hit control Q

  You should be able to move your cursor to the top of the screen and the menu bar will fall.  So, you start with

  

  Drag the slider to the top of the screen against the edge and hold that and you should see

  

  Click the button of "green".  This should take you out of mode full-screen Mail.

  Command + control + F should do it too.

  Also when you have the cursor at the top of the screen and the menu bar comes down, you could also use Mail-> view-> full screen output

  You should also be able to use the command + Tab to switch to another application

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.