My computer starts start but good after enforcement of the part of Windows XP, stops, instead of loading the background & programs... Why?

Similar Questions

• Computer starts but cannot access all programs, error "the APPCRASH event name.

  Original title: computer starts but can not access to all programs

  What is an APPCRASH problem event name?       or entry point setupapi-CM Get brother is not found in the CFGMGR32.dll dynamic link library.

  Hi Philippe,.

  Please contact Microsoft Community. I will surely help you with the resolution of this error on startup.

  APPCRASH is a term used by Windows for a crash of the application and is reported as "problem event name: APPCRASH", it will also contain information about the name of the program crashed.

  This problem might have occurred because of these reasons:

  1 conflict between third-party applications.

  2 virus.

  3 corrupt system files.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest to start the computer using safe mode and check if the problem occurs or not. If this isn't the case, I suggest you to put the computer in a clean boot state and check if it helps.

  Step 1:
  Start the computer in Mode safe. At the start of the computer Mode safe with the minimum set of drivers and files.
   
  Start your computer in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:
  If the issue happen not in Mode without failure, perform a clean boot and check. Setting the system in a clean boot state will help you determine if third-party applications or startup items are causing the problem.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135/en-us

  Note: After the clean boot troubleshooting steps, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Method 2:
  If the problem persists, I suggest you analyze your computer by using the Microsoft Safety scanner to make sure that the computer is virus-free. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  -The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  -If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Method 3:
  If the problem persists, I suggest you perform the Scan SFC (System File Checker) and check if it helps. SFC scan will search the system files corrupted on the computer and replace them.

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized.

  After that the most recent windows update, my computer starts a little more slowly and the start bar at the bottom rises gray and rasterized. In addition, all pages that I opened on the internet are coming with the same blocks of old, gray. Any ideas on what was past, and how to fix it?

  Original title: old start bar

  Right-click on your desktop, go to customize and then make sure that any theme in the 'Aero' section is currently selected.

• my file were gone in all menu programs start but it still usable in the c drive... Why? and how to get back to normal

  my file were gone in all menu programs start but it still usable in the c drive... Why? and how to get back to normal?...

  its empty in all programs but available to the c drive... can someone help me? /

  The elements of the start menu are a few shortcuts to the files on the C: drive you mention.  Done that caused all the elements of Start Menu to disappear?  This is sometimes caused by viruses that hide items on the computer, make sure that the computer is virus free, run a Malwarebytes scan on the machine.  If the machine is free virus that then I suggest that you do a system restore to a point just before the problem started.

  John

• Download Itunes on my laptop just before, it starts to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation

  original title: Itunes and DEP

  While downloading Itunes on my laptop right before you start to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation.  Is there any solution for this?  I'd like to install itunes on my laptop.

  Hi Steve681229,

  Thank you for using the Microsoft Answers forum.  Here's what worked for someone else.  Thanks Kevin

  Hi thrivenformore,

  Please use the forum for Support of Vista,

  You could try to add iTunes to the DEP exception list.  However, this behavior is not normal.  Go to the support forum of Apple for iTunes for Windows, search on DEP.  There should be a thread "How can I turn off DEP for iTunes?" or it Prevet planting iTunes? "which provide troubleshooting steps you might want to try before adding it to the list of exceptions."

  How to add the program to the DEP exception list:

  1. Press Start, right click on computer and select Properties.
  2. in the window that appears, click Advanced (on the left panel) system settings.
  3. in the first box that says Performance, click on the settings button.
  4. in the window that opens, click the Data Execution Prevention tab at the top.
  5. There should be a box of exceptions in the middle of this window. Click the Add button and navigate to the C: drive, then Program Files, then the iTunes folder, and then choose the iTunes exe.
  6. Add the exception, and then click OK in the window of the DEP.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  trying to preload my computer laptop tosiba but keeps failing and giving the code oxc00000e9

  Hi Pashley,

  I see you get error 0xc00000e9. I'll help you with this problem.

  1. What is the model number of the computer?

  2. you talk to re - load Windows Vista on Toshiba computer?

  3. How are you trying to re - load Windows Vista?

  4. when exactly you get this error message?

  Please provide us with more information to continue troubleshooting as a result.

  See the link on how to ask questions or help on the Forums.

  Suggestions for a question on help forums: http://support.microsoft.com/kb/555375

  Refer.

  You can also post this question in the Toshiba Forums: http://forums.computers.toshiba-europe.com/forums/index.jspa

  Thank you.

• Whenever I have shut down my computer, it displays a popup saying to close the background image and then it stops.

  Original title:

  Whenever I have shut down my computer, it displays a popup saying to close the background image and then it stops. Should what settings I change so that does not happen?

  Hello

  1. What is the brand and model of the computer?

  2 have you made any changes to the computer, before the show?

  Method 1:

  Perform a clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Once you are done with the boot, follow step 7 of article to reset your computer to normal startup.

  Method 2:

  Change the wallpaper and check.

  Change your desktop background (wallpaper)

• Designed the large page background color/text and images. Seems ok, but when I send pdf the background page is much too small.

  Designed the large page background color/text and images. Seems ok, but when I send pdf the background page is far too small - the drawings are ok.

  Send to the printers tomorrow but pdf does not appear correctly! Any ideas? Please, I beg you!

  Please tell us

  -This page - is that he recorded in a graphic file? What type? If not, where is it?

  -How exactly do you send as PDF - what app do you use? and what are the measures?

• I have CS5.1 on a single computer and I would like to install the new computer (by download) that I have to disable the original program first?

  I have CS5.1 on a single computer and I would like to install the new computer (by download) that I have to disable the original program first?

  You are allowed to have facilities of acrivated twop is not necessary that you clear the first, even if you can, if you wish to have available additional activation.

• CD/dvd drive does not work - it is recognized when the computer starts, and it is listed in the Device Manager?

  I am running Vista Home Premium on a laptop Compaq Presario F700. It is listed in the list of computers of readers, it is listed in Device Manager. The lites drive that the computer boots so I know it is detected. When you run itunes or media player the player does not open. When I push the drive button it will not open. It opens with a paperclip in the exit hole. It cannot read a CD or a DVD. None of the media players even recognize there is a disc in the drive. I tried to run fixit, but it would not drive either. I tried restoring from a previous backup, without change.

  Hello

  Check / settings (BIOS/CMOS) often F2 so watch the screen as it starts - place CD/DVD
  1st in the boot order (remember to put it at the time where the fact).

  Then put in a DVD to boot Windows and see if the driver works.

  If it doesn't then it's a hardware problem.

  =======================================

  If the drive has worked in the test above, that these can help:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Have a new Dell, the print spooler must be started manually, and after you close the properties of the printer etc.

  Problems with the print spooler, is not serious what printer etc. have removed all and re-installed... the spooler, must be started manually everytime... after I restart the service., he works for a few minutes and stops at OFF, normally 3 or click during the verification of the properties of the printer etc... Help please!

  Jimmyp5,

  Print jobs stuck in the queue can cause problems. Try to run the remove print jobs , and then restart your computer.

  So try these settings...

  Start, Control Panel, Manager of devices.

  Go to the section USB controller, and then click the plus sign +.

  Go to each USB hub root and right-click on it, on the left, click Properties, on the left, click power management. Uncheck the allow the computer to turn off this device to save power.

  Restart your computer.

  --------------------------------------

  Start, Control Panel, Manager of devices. Click Network and then right click on your wireless network adapter, on the left, click on properties, power management. Uncheck the allow the computer to turn off this device to save power.

  Rick

• When the computer starts a dialog box appears on the screen, the title of box - Windows Product Activation - it's authentic? (details below)

  The message says:-since first, windows has been activated on this computer, the computer hardware has changed a lot. Because of these changes, Windows must be reactivated within 3 days. You want to reactivate Windows now?

  That sounds like a real message, or would it be a virus?

  There are months that additional memory has been added on the hard drive.

  It looks like a real message and that activation glitch sometimes. Go ahead and turn on the computer. MS - MVP - Elephant Boy computers - don't panic!

• I've updated as much as my computer will go, but it is still asking me to upgrade, how to stop?

  I have a MAC and you cannot upgrade the operating system. Firefox keeps asking me to upgrade and I can't. How can I stop it asking me every time I go to another page? Even with google and gmail. I can't be upgraded more. How can I stop it asks all the time?

  Thank you all for all the help, but after trying all the suggestions, the conclusion, more or less a solution is not to use Firefox more! Nothing get rid if the real question Yes, sorry but good bye Firefox! Thank you all...

• I downloaded T-bird, set up, but I can't launch the installation. Why not?

  I got Thunderbird, but I couldn't open the incoming messages on one of my laptops. I uninstalled and downloaded a new version, but I couldn't install it. Why can I not?

  No error messages refer to why?

  I would like to once again, it download from here: https://www.mozilla.org/en-US/thunderbird/all.html