My d drive is full and the computer won't let me save

Similar Questions

• Parental control: I am the admin of the computer and the computer won't let me access the list allow and block my child's account

  I am the administrator of the computer and the computer won't let me access the list allow and block my child's account.  I'll bring my parental control password, click on my childs account, put parental controls, go to web filter and click on block some web sites, click on edit the allow and block list and the computer tells me that it is not able to make changes to parental controls settings and see the system administrator if the problem persists.

  Hi Ranw,

  ·        What is the error message when you try to change parental controls?

  ·        Have you been able to make any changes on this computer from your account earlier?

  You can follow the steps below and check if you can make changes to the parental controls on your computer.

  Step 1:

  Disable UAC (User Account Control) and check the result. Access the link below and follow the steps to disable UAC.

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: You must restart your computer when you enable or disable UAC. Change levels of notification does not require that you restart your computer.

   

  Step 2:

  I suggest to create a new administrator account and log later in the new administrator account, try to set parental controls and check if it works.

  Create a user account:http://windows.microsoft.com/en-US/windows-vista/Create-a-user-account

  Check out the link below to check if the parental control is properly set:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-parental-controls

  I hope this helps. Let us know the result.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I don't remember my password and the computer won't let me use a password reset disk not a kno another way? __

  I don't remember my password and the computer wont let me reset disk. is - anyone kno a way?

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  Mick Murphy - Microsoft partner

• My password does not work and the computer won't let me? What caused this and how to fix it?

  Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

  Friday when I signed up computer turned off, everything worked very well. Today it lit, and all of a sudden my password does not work. I had the computer about two years and everything was fine with the same password. Someone might have tried to sign without the correct password - would he have it? I don't know what to do, but must enter into the system! Any sugguestions?

  If you have a Vista DVD, please use this tutorial from Microsoft Support:
  http://support.Microsoft.com/kb/940765/en-us

  Here's another same tutorial, but from another source;
  How to regain access to your administrator account tutorial link For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I'm trying to run the sfc/scannow command. but the computer won't let me

  How to make a console session
  I'm trying to run the sfc/scannow command. but the computer won't let me. He tells me that I need to be an administrator (which I am) and I have to run a session of consul?

  Go to start | Programs | Accessories and right click on the command prompt, and then select run as administrator.  It's a console session.

  Steve

• My hard drive is dead and now Adobe won't let me install my copy of CS6? How to solve this problem and get my product?

  It is not my fault that my hard drive has ended then why they won't let me install? It would be the 3rd time I installed because I had to wipe my hard drive last year due to a virus is not as if I was crazy with it. How is - that different from me dust off a disc and install it manually? I sent redsupport, but they have not yet responded. The telephone line will not help with anything related to my product so I can not literally put their hands on someone. I NEED for my work animation and can not afford to CC or a replacement.

  How can I speed it up and get the product I own?

  Thanks in advance.

  In that case please contact customer service to obtain your activation account is reset.

• After that the effects won't let me save my project -

  I am trying to record my AE project, but a warning appears saying that it cannot be saved.  I downloaded the permissions to check the latest version etc but nothing works.  When I open AE, I get a warning on CUDA and NVIDIA-I'm now downloading it.  This could be the reason why it wont let me save my projects?  any other suggestions.  I'm not very good with the technical jargon so please keep the simple answers for this person cannot!

  Thanks for your help

  Bev

  You cannot save the files to the root of your volume. You have to put inside a folder. Also the notation with all these extra points for naming your files are just strange and will shake your operationg system. Use underscores or just leave spaces.

  Mylenium

• Backups taking over 130 GB of 160 GB, getting 'Startup Disk Full' and the computer does not. Help!

  I fight for free space on one of my older iMacs work and I am to the point that we cannot use it because the startup disk is full.  I've recently upgraded to Snow Leopard OSX Lion (10.7.5) so I could update our video editing software, Adobe Premier.

  We run all our video projects on external hard drives, which does not have the boot disk space and are always good on the erasure of files from the Recycle Bin, audio, photo and video so that they are not get bogged down.  About this Mac shows my 160 GB boot drive contains 8.87 GB Audio, 7.69 GB, 6,49 Photos GB movies, 6.58 GB Apps and a huge 129.34 GB of backups.  I have time Machine backed up on an external hard drive and can't seem to find out where these files are to be removed from the startup disk.

  Turn off time Machine and restart does not clear space.  I have even made the Terminal kill command no matter what auto backups, deleted device and old library version in iTunes, etc.  and I have no backup label appears when I bring up the screen of star wars of the time Machine. I went through so many stages and suggestions to get this machine working again.  I understand these backups are supposed to remove themselves automatically, but why are there still first place if I save on the outside?

  PS I'm not very computer savvy, but I know my way around.  Additional suggestions are appreciated - please let me know if I need to provide more information.

  http://www.howtogeek.com/212207/how-to-free-up-space-used-by-time-machines-local - backups on your mac.

• In Vista, receive notifications that the C drive is full and need to free up space

  I get constant reminders, saying that my C drive is full and I need to free up disk space. I tried to use the disk clean up, but it does not free enough space. Please help if you can

  Hello

  1. what subjects you have stored on the C drive?
  2. How may readers you have in your computer?

  See the article below which might help you.
  Strategies to free up disk space
  http://Windows.Microsoft.com/en-us/Windows-Vista/strategies-for-freeing-disk-space

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter t

  Redesign existing external hard disks and still 6 Lightroom able to find existing photos.

  I currently store my pictures on and an external hard drive.  Lightroom 6 was not able to find the picture momentarily files.  I inserted an external Flash DRIVE after removing the hard drive and the computer renamed the stick with the same drive letter that has been designated by Lightroom to store my photos.  I could go into my Windows 10 and reset the player to the letter that Lightroom has given at the beginning of the external hard drive.   However, I know this can happen again, if I connect any stick USD or another device, while the external hard drive is not connected to my laptop.   I found the information that I can do the new designation of the final drive by choosing a letter it is 1/2 way or higher in the alphabet.   I would like to turn an external hard drive on a strong letter, warns we hope this previous problem.   My question is, if I already have a lot of pictures on this external hardrive with the designation of the current drive, how it becomes a higher letter and have 6 Lightroom recognizes files, now under the new designation of drive letter without having to go to each photo individually and manually force Lightroom 6 find each photo.  It would take more time than I'd like to lose.  Is there a way to get just 6 Lightroom to recognize the new disk designation has changed and is able to find all of the existing files?

  I have read the ADOBE LightRoom 6 manual and seem not to be able to find anything on how to do it.

  Any help would be welcome.

  Thank you!

  So in Windows, you can select a drive like q letter (or any other letter you want only towards the end of the alphabet)

  Then in Lightroom, you can reconnect to the photos on q: the following instructions (see specifically 4 Figure and related text)

  Adobe Lightroom - find moved or missing folders and files

• I had Photoshop Elements11 on the other computer, but the failed hard drive and could not be used to transfer files.  I tried to use the original disc, purchase the program won't let it charge.

  I can't Photoshop Elements11 to load on my new computer.  I get a message that the program has been registered on another computer. This is technically correct, but the computer was the lost the hard drive and I can't recover programs or files that have been on it.  I want to install the program on the new computer, but the program won't let me and sent me to this site.

  Hello

  I checked with the email, but there is no product on the redemption code you provided has not redeemed on your email, it bought on someone to another email address, please contact the seller regarding the same.

  Kind regards

  Bani

• Qosmio F10 - driver of sound and the modem does not install

  Hi all.

  Firstly, my computer is 100% up-to-date. I recently had to do a complete reinstall of my OS
  I got all my drivers and what not, install, but the driver sound max and the modem driver will not install.

  For the modem, it asks if I want to install it, I click Yes and it starts the installation and then he finshes and nothing comes. It is not installed.
  I then try my sound, and it seems as if it will install, but then I get an error that says: no driver is found, please reboot your computer.

  Or something around those lines anyway.

  Can someone help me please?

  Hi, have u tried in safe mode. Why do not you download the latest drivers? You can try this site http://driverscollection.com/?H=Qosmio%20F10&By=Toshiba

• HP 2000 - 2b19WM Notebook PC: AMD graphic Driver fails repeatedly, and the PC often restarts itself...

  I bought this laptop a few months, put it away in a corner and when is it coming out my old laptop broke. I got it at low cost, was handed to nine Windows 8 PC, I've updated to 8.1 in early December. I use this laptop heavily, I watch a lot of videos, and I kept meeting my good old friend, the green of death. I was familiar with it, that the pilot had failed several times on my other laptop as he grew older. However, this error occurs repeatedly. I'll see that I've got the greenscreen, I'll go to my office and opened to the top of the screen with all the drivers listed, click on the display of the maps section and open the graphical part of AMD. I'll click Update driver in the second tab to search for updated drivers. Each time on what he tells me that he has that no update, so I'll be back with the graphical part of AMD, click Update again and, this time, search the drivers already installed on my laptop. Currently, there are 2 AMD drivers available, both the AMD Radeon HD 6310 versions, one starting with a 12 and the other starting with a 13. No matter which version I coose, both only work for a few hours before I have to redo the procees.

  ALSO, sometimes after update the graphics drivers, my laptop with just close and restart. He will sit on page load with the HP logo and the circle with doing the loading circle, but the page with disappear and appear again and do exactly the same thing. On several occasions. Finally, a blue screen appears which says I need to restore my laptop and the previous version. I click on the button to do it, and the screen returns to the page from loading except now, it not there no circle loading, just the HP logo. He's sitting like that for about 20-30 minutes before a blue screen appears stating that the laptop could not restore to the earleir version, and there is a button Advanced Options on the Advanced Options page there is a button that says exit and go from 8.1 to Windows, so I click on that and the computer restarts normally and I can use my laptop again.

  SO I need someone to tell me how to stop the repeated appearance of greenscreen and (hopefully) tell me how to stop my computer to reboot (it did its shenanigan last night, and when I finally got my computer back to the start screen, my Word documents had disappeared completely. I even tried to restore all thatword documents recorded due to the closure forced the document, but nada for me) I'm afraid that I'll lose even more work and time to these problems, and I hope that someone can help me.

  Hi @SabrinaS,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your 2b10wm of 2000 HP Notebook PCs and laptops having problems with restore points. Two graphics drivers that you see listed and you restart the portable computer to uninstall.

  Here is a link to the HP Support Assistant. Simply download and run the application and it will help with the software and drivers on your system that may need updating.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Here is a document on assistance with the computer does not start. It gives you instructions step by step when you see the HP Logo screen.

  What happens when you play a DVD?

  What browser do you use? Here is a site that will check if your update.

  Please let me know.

  Thank you.

• Issue to receive the error message "the system has recovered from a serious error" while working on the computer and the computer restarts automatically.

  Original title: The system has recovered from a serious error-

  The system has recovered from a serious error-

  When you work in windows xp home edition, whenever this programe message and stop running and some auto restart machine.

  What is the solution for this?

  Hi Sandeep,

  Thanks for posting your question in the Microsoft Community forum.
  It seems that you have a problem with the error message "the system has recovered from a serious error," while working on the computer, and the computer restarts automatically.
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  Method 1: I suggest following the steps listed in the article and check if it works.
  Error message: the system has recovered from a serious problem
  http://support.Microsoft.com/kb/316424

  Method 2:
  I suggest you analyze your computer by using the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.
  You can see the article for more information:

  A "System has recovered from a serious error" message after every restart.

  http://support.Microsoft.com/kb/317277

  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.