Problem with efficiency

Similar Questions

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• I was called by someone who said that I had a problem with my computer

  original title:

  I think I was a victim of a SCAM, a solution Windows online Eric called me to say that I had a problem with my computer.  He had me to enter a code (key Windwos more R entered eventvwr and gave me all the error messages that have been sent to microsoft.)   He had a technician take over my computer to see if the software layer of secruity has been exceeded, the technician SAIS Yes and wanted me to buy a new title for my windows XP to 120.00.    I said no. I have his contact details, it was California.

  How has this affected my computer?

  Remove all error events that affect the system?   to see u windows touch R and then type eventvwr.

  Microsoft can verify the software layer of security to see it really happened to expire?

  Hello

  Its a total scam. Uninstall their software and then perform a system restore before you install.
  Change all your sensitive passwords at all sites - e-mail, Bank, credit cards and others. (Do not
  on the computer compromise and it would be better to do it on the phone or in person.)

  You can even restore your system to factory fresh to make sure their software violates not
  your security. (Ways to re - install Windows Clean - removing everything on the backup drive so all the data
  before hand.)

  ====================================================================
  ====================================================================

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Do not fall for the fake phone Tech Support
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  ===========================================================
  ===========================================================

  Follow these steps carefully:

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN - type in the box-

  sfc/scannow

  Then run checkdisk (chkdsk).

  RUN - type in the box-

  Chkdsk /f /r

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with the rendering of JProgressBar in JTable

  I have some problems with the rendering of JProgressBar in JTable. In the case of several lines, when a progress bar is updated, and its text is changing, then he painted all the progress bars in this column.
  
  Here is my code I used to create the table:
  --------------------------------------------------------------------------------------

  JTable convertTable = new JTable(convertTableModel) {
  
              public Component prepareRenderer(TableCellRenderer renderer,
                      int rowIndex, int vColIndex) {
                  Component c = null;
                  if (renderer != null) {
                      c = super.prepareRenderer(renderer, rowIndex, vColIndex);
  
                      if (vColIndex == INDEX_CONVERT_STATUS) {
                          //System.out.println("c = "+c.getClass());
                          if(c instanceof JProgressBar) {
                              //System.out.println("inside = ");
                              c.setBackground(Color.BLUE);
                          }
                      }
                  }
                  return c;
              }
  
              public boolean isCellEditable(int rowIndex, int mColIndex) {
                  if (mColIndex == INDEX_CONVERT_SELECT) {
                      return true;
                  } else if (mColIndex == INDEX_CONVERT_STATUS) {
                      return false;
                  } else {
                      return false;
                  }
              }
  
              /*
               * JTable uses this method to determine the default renderer/
               * editor for each cell.  If we didn't implement this method,
               * then the last column would contain text ("true"/"false"),
               * rather than a check box.
               */
              public Class getColumnClass(int c) {
                  if (getValueAt(0, c) != null) {
                      return getValueAt(0, c).getClass();
                  }
                  return null;
              }
          };

  --------------------------------------------------------------------------------------
  
  Then I applied on this table rendering engine
  
  ---------------------------------------------------------------------------------------

  // Applying JProgressBar Renderer for convert table
          TableColumn col = convertTable.getColumnModel().getColumn(INDEX_CONVERT_STATUS);
          ProgressBarRenderer progressBarRenderer = new ProgressBarRenderer();
          col.setCellRenderer(progressBarRenderer);

  ---------------------------------------------------------------------------------------
  
  Class code ProgressBarRenderer is as follows:
  ---------------------------------------------------------------------------------------

  public class ProgressBarRenderer extends JProgressBar implements TableCellRenderer {
  
      private Hashtable ht = new Hashtable();
  
      public ProgressBarRenderer() {
          super(0);
          this.setMinimum(0);
          this.setMaximum(100);
          this.setStringPainted(true);
          this.setBorderPainted(true);
  
          UIDefaults defaults = UIManager.getDefaults();
          Font font = new Font("Arial", Font.BOLD, 12);
          defaults.put("ProgressBar.font", font);
      }
  
      public void setRowEnabled(int row, boolean enabled) {
          ht.put(row, enabled);
      }
  
      public void setForeground(Color c, int row) {
          //System.out.println("setString ht = " + ht.size() + "  row= " + row + "  Selected= " + (Boolean) ht.get(row) + " color= " + c);
          if (ht.isEmpty()) {
              this.setForeground(c);
          } else if (ht.size() == 1) {
              this.setForeground(c);
          } else if ((Boolean) ht.get(row)) {
              this.setForeground(c);            
          } else {
              this.setForeground(c);
          }
      }
  
      public void setString(String s, int row) {
  
          //System.out.println("setString ht = " + ht.size() + "  row= " + row + " text= " + s);
          if (ht.isEmpty()) {
              this.setString(s);
          } else if (ht.size() == 1) {
              this.setString(s);
          } else if ((Boolean) ht.get(row)) {
              this.setString(s);
          } else {
              this.setString(s);
          }
  
      }
  
      @Override
      public Component getTableCellRendererComponent(JTable table,
              Object value, boolean isSelected, boolean hasFocus, int row, int column) {
          
          //System.out.println("getTableCellRendererComponent = " + table);
          //System.out.println("Renderer ht = " + ht.size() + "  row= " + row + "  Selected= " + (Boolean) ht.get(row));
          
          if (ht.isEmpty()) {
              return this;
          } else if (ht.size() == 1) {
              return this;
          } else if ((Boolean) ht.get(row)) {
              return this;
          } else {
              return null;
          }
      }
  }

  ---------------------------------------------------------------------------------------
  
  I add the next line and rendered the progress column is follows:
  

     convertTableModel.addRow(new Vector());
     ((ProgressBarRenderer) convertTable.getCellRenderer(row, INDEX_CONVERT_STATUS)).setRowEnabled(row, false);

  ---------------------------------------------------------------------------------------
  
  When I add the first row, it works fine, but when I add the second row, he painted the entire column.

  Naturally, you will have problems if you set a string or a color of a table cell value when the class of the column is declared as integer. As I have already said, you need to spend some time with the tutorials.

  import java.awt.BorderLayout;
  import java.awt.Component;
  import java.awt.event.ActionEvent;
  import java.awt.event.ActionListener;
  import java.util.Random;
  import javax.swing.*;
  import javax.swing.table.DefaultTableCellRenderer;
  import javax.swing.table.TableCellRenderer;
  
  public class ProgressBarTableCellRendererExample {
  
    Random random = new Random();
    JTable table;
  
    public static void main(String[] args) {
      SwingUtilities.invokeLater(new Runnable() {
  
        public void run() {
          new ProgressBarTableCellRendererExample().makeUI();
        }
      });
    }
  
    public void makeUI() {
      table = new JTable(10, 1) {
  
        @Override
        public boolean isCellEditable(int row, int column) {
          return false;
        }
      };
      for (int i = 0; i < table.getRowCount(); i++) {
        table.setValueAt(0, i, 0);
      }
      table.getColumnModel().getColumn(0).
              setCellRenderer(new ProgressBarTableCellRenderer());
  
      JButton button = new JButton("Increment");
      button.addActionListener(new ActionListener() {
  
        public void actionPerformed(ActionEvent e) {
          increment();
        }
      });
  
      JFrame frame = new JFrame();
      frame.add(new JScrollPane(table), BorderLayout.CENTER);
      frame.add(button, BorderLayout.SOUTH);
  
      frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
      frame.setSize(400, 400);
      frame.setLocationRelativeTo(null);
      frame.setVisible(true);
    }
  
    private void increment() {
      for (int i = 0; i < table.getRowCount(); i++) {
        Object value = table.getValueAt(i, 0);
        if (value instanceof Integer) {
          Integer oldValue = (Integer) table.getValueAt(i, 0);
          int newValue = Math.min(100, oldValue + random.nextInt(25));
          switch (newValue) {
            case 13: // and its multiples
            case 26:
            case 39:
            case 52:
            case 65:
            case 78:
            case 91:
              table.setValueAt("Failed", i, 0);
              break;
            case 100:
              table.setValueAt("Completed", i, 0);
              break;
            default:
              table.setValueAt(newValue, i, 0);
          }
        }
      }
    }
  
    private class ProgressBarTableCellRenderer
            extends JProgressBar implements TableCellRenderer {
  
      private TableCellRenderer stringRenderer =
              new DefaultTableCellRenderer();
  
      public Component getTableCellRendererComponent(JTable table,
              Object value, boolean isSelected, boolean hasFocus,
              int row, int column) {
        if (value instanceof Integer) {
          setValue((Integer) value);
          return this;
        } else {
          return stringRenderer.getTableCellRendererComponent(table,
                  value, isSelected, hasFocus, row, column);
        }
      }
      // Override void validate(), invalidate(), revalidate(), repaint()
      // and all overloads of firePropertyChange(...) as no-ops
      // for efficiency
    }
  }
  

  DB

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I'm having problems with an outdated Apple ID

  I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  Hello

  Go down to itunes apple ID Delete page homepage all ID and then add it back back.

  See you soon

  Brian

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.

• ios10 problem with non-users of iphone messaging

  After upgrading my iPhone 6 ios10, I had intermittent problems with the messaging of Android users (basically, the conversations no iMessage). In about 60% of the time it is not just to deliver the message no matter what I do (pressing the 'Try Again' don't work do not). He has no problem with the reception of the texts, but I can't answer to Android users (Interestingly, I can message users of Android if they are in a group with iPhone users text). I tried everything was updated to the last verision until reset of ios everything.

  I can't find anything online about this. I'm the only one who what?

  Group Messaging uses the MMS. Normal text messages using SMS. SMS uses the voice channel to transfer messages and is strictly a basic function. If you are experiencing problems sending SMS, contact your carrier.

• I have problems with ios 9.3.5

  my ipod says it's still Friday, September 23 when it is Monday 26 and is stuck in the 04:00 time when I change the time, the screen turns off a color at random, then restarts then both will and I have to change but rest later if it changes at all used to date will not change anything and it runs still works when it wants to and it doesn't stay connected to WiFi , I have the ipod 5th generation and am not elligible for ios 10 Please if you can solve this problem with ios 9.3.5 I would be very grateful as I use my ipod for almost everything. Thanks - René

  It is a community based on the user. You do not speak to Apple directly. You can contact the Apple Support here: http://www.apple.com/ca/contact/

• I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. Update

  I have intermittent problems with iphoto importing from iphone since 0sx 10.11.6. -Update

  1 iphoto sees not iphone - restart

  2 iphoto sees iphone but says "no pictures" - restart

  3 Iphoto sees phone and photos and I click Import all or import selected - then I have problem of file format and nothing is imported

  NOTE: I have similar problems with image capture - sometimes you can see the phone and photos, and sometimes is not

  I have an imac 2015 - execution of yosemite

  Help my new iphone because 7 is coming today and I am terrified of the transfer.

  Not sure, but in any case iPhoto is a dead - it would be really smart to learn pictures (a totally new and different program with a learning curve and different workflows)

  With the help of pictures with my new iPhone 7 and iCloud photo library all works well without any problem - nothing different photos with my iPhone except the news and the best quality Photos 5

  LN