My desktop computer is displayed on my network card, but I can't connect my laptop and share files

My desktop and laptop running windows vista 64-bit.  I used to be able to open the files on my laptop that were stored on my desk but now I can't make the connection.  When I look at my network devices, the desktop but I can always see it on the network map.  The only thing that has changed is I had to replace my router, but I do change all the settings.

Hello

I suggest you to follow the steps in this link and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-computers-on-a-home-network

Also check out this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

It will be useful.

Tags: Windows

Similar Questions

  • "due to an unidentified problem, windows cannot display windows firewall settings" fixed but still can not visit some sites and the laptop now turns off the coast on me. What should I do?

    I have an Apire one laptop with Windows xp service pace 3. I had to restore it to factory about 3 years ago. Some time after that the sound system began to slow and the Synaptics mouse stop working properly. I can move the pointer, but the left click does not work. It works in safe mode but not in normal windows. I used the Acer eRecovery for correct, but it did not work. I tried to download the driver for the mouse on the internet, but some how it could stop the download. I gave up at tring to fix. Some time in late March or early April, I couldn't access internet and after 22:30. I ran the diagnosis that is provided by internet explore and he said that the HTTP and HTTPS worked but the FTP did not work. AVG later told me my firewall is disabled and there was the possibility to reactivate it and I did. After internet explore stop allowing you to enter certain sites that I wanted to enter, I ran the Diagnostics again and he told me that a firewall client has been the cause of the problem. I tried to control my firewall setting, but had that "due to a problem not identified, windows cannot display the firewall settings". I thought AVG was the problem, so I have unintalled then he returned and attempted to access the firewall but got the same message. I typed in Google MySapce and found this site. I followed a few directions given to others in the thread started by joecarpenter33 and discovered that my firewall has been deleted and Base filtering engine has been deleted also. I downloaded and ran Malwarebytes ANti-Malware and SUPERAntiSpyware Free Edition and tdsskiller. MBAM has found a Trojan. The results of the analysis is less to:

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS (secure/setting network Mode)
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: disabled

    10/04/2013-17:44:54
    MBAM-log-2013-04-10 (17-44-54) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 271656
    Time elapsed: 43 minute (s), 42 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\RECYCLER\S-1-5-21-4674304-3331980883-3375822000-500\$7832f44fdd2ba165f6ea01bec7f363fd\n (Trojan.0Access)-> quarantined and deleted successfully.

    (end)

    Malwarebytes Anti-Malware (Trial) 1.75.0.1300
    www.Malwarebytes.org

    Database version: v2013.04.10.14

    Windows XP Service Pack 3 x 86 NTFS
    Internet Explorer 8.0.6001.18702
    Ziadie Berry: BERRY-LAPTOP [Director]

    Protection: enabled

    10/04/2013 23:43:49
    MBAM-log-2013-04-10 (23-43-49) .txt

    Scan type: quick scan
    Analyze the options enabled: memory | Startup | Registry | File system | Heuristic or Extra | Heuristics/Shuriken | PUPPY | PUM
    Analyze the options disabled: P2P
    Objects scanned: 269636
    Elapsed time: 49 minute (s), 41 second (s)

    The process of memory detected: 0
    (No malicious items detected)

    Modules of memory detected: 0
    (No malicious items detected)

    The registry keys detected: 0
    (No malicious items detected)

    The registry values detected: 0
    (No malicious items detected)

    Registry data items detected: 0
    (No malicious items detected)

    Files detected: 0
    (No malicious items detected)

    Files detected: 1
    C:\WINDOWS\assembly\GAC\Desktop.ini (Rootkit.0access)-> quarantined and deleted successfully.

    (end)

    I ran the Diagnostics today after Internet explore and my other browsers stop allowing me to internet access. That's what came back:

    Diagnosis of last run time: 17/04/13 17:48:14 WinSock Diagnostic
    WinSock status

    attmpting error information to validate the Winsock base providers: 2
    error not all entries could be found in the basic services provider winsock catalog. A reboot is required.
    user redirection of information in support of the appeal

    Diagnosis of network adapter
    Network location detection

    Info to help home Internet connection
    Identification of network adapter

    Info network connection: name = Local, peripheral network connection = Realtek RTL8102E Family PCI - E Fast Ethernet NIC, MediaType = LAN, type = LAN
    Info network connection: name = wireless, peripheral network connection = Atheros AR5007EG Wireless Network Adapter, MediaType = LAN, type = Wireless
    Info both Ethernet connections and wireless available, ask the user for selection
    required user input action: select network connection
    Info Wireless connection selected
    State of the network adapter

    Info network connection status: connected

    HTTP, HTTPS, FTP Diagnostic
    HTTP, HTTPS, FTP connectivity

    WARN HTTPS: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.microsoft.com: a connection with the server could not be established
    warn HTTP: error 12029 connecting to www.hotmail.com: a connection with the server could not be established
    WARN HTTPS: error 12029 connecting to www.passport.net: a connection with the server could not be established
    WARN FTP (passive): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    WARN FTP (active): error 12029 connecting to FTP.Microsoft.com: a connection with the server could not be established
    error could not make an HTTP connection.
    error could not make an HTTPS connection.
    error could not make an FTP connection.
     
    Still, he remains connected to the wirelesss connection, but won't let me access the internet. Right now I use a proxy to help, but access to the sites are limited.

    I used the tweaking software and my firewall is back but, I have yet to visit some sites and the laptop now turns off by itself.

    Hello

    Follow these methods.

    Method 1.

    Start the computer in safe mode with network and run a full scan of computer viruses.

    To start the computer in safe mode: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 2.

    If the steps above do not help, then try to scan the computer using Windows defender in offline mode and check if that helps.

    Search for spyware and other potentially unwanted software: http://windows.microsoft.com/en-US/windows7/Scan-for-spyware-and-other-potentially-unwanted-software

    What is Windows Defender Offline? : http://windows.microsoft.com/en-US/windows/what-is-windows-defender-offline

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 3.

    You can create a new user account and check. Once the new user account works fine, then copy the data from the old user account for the user account.

    How to copy data from a user profile damaged to a new profile in Windows XP: http://support.microsoft.com/kb/811151

    Let us know if you need assistance with any windows problem. We will be happy to help you.

  • Hi, I have the cloud creative apps on my desktop on my laptop but I just got a new laptop and you want to transfer these apps on my new laptop computer?

    Hi, I have the cloud creative apps on my desktop on my laptop but I just got a new laptop and you want to transfer these apps on my new laptop computer?

    You must download and install Adobe Creative Cloud desktop application, using that you can install the CC apps. :

    Download and install Adobe Creative Cloud apps

  • Hi, I have CC on my desktop computer. Yesterday I connected my laptop and tried to download PremierePro on it. I had only 30 months trial version. What should I do to get the CC version?

    Hi, I have CC on my desktop computer. Yesterday I connected my laptop and tried to download PremierePro on it. I had only 30 months trial version. What should I do to get the CC version?

    Hello

    Please see the below help documents:

    Applications creative Cloud back in test mode after an update until 2015 for CC

    Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

    Kind regards

    Sheena

  • My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

    My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

    original title: internet connection.

    Hi vonhatten,

    1. Did you the latest changes on the computer?
    2. You receive an error message when you try to connect to the internet?
    3. You have security software installed on the computer?

    Refer to the article below and try the steps mentioned, check if it helps.

    In Windows network connection issues

    http://support.Microsoft.com/kb/313242

  • HP ENVY 17-j184nr: to upgrade my network card but do not know if it would be not compatible

    I just got a new router. My computers internet (WLAN) was beyond terrible. I had an old dual band of D-link router and got about 17Mbps with it and about 50 Mbps on cable. However this new routher will actually two different frequencies, while the other is just them merged into one.  With the new router, I was getting some 55-60 Mbps Wi - Fi AND wireless (on the b/g/n wireless card). However, the next morning, I only get like 2 Mbit/s or less, running the same wireless card. I think that may be because the wireless card is not compatible AC could be the reason. I was eager to upgrade the network card but was not sure if HP has always been whitelisting them with this model. Do you still think it would make a difference? I just got this computer it not too long ago with the HP care pack of replacement and it gives me nothing else than problems, do you also think that they would replace it again?

    No whitelist. I had a 17-j029nr HP lent me and he had no whitelist and yet yours is newer so 100% free whitelist.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • My wireless on my laptop will read the files on my desktop but I can't connect to the internet, my lapto electrician iI unless other computers work well

    My wireless on my laptop will read the files on my desktop but I can't connect to the internet, hard wire my laptop iI unless other computers work fine

    The following diagnostic information:

    1. Connect your laptop wireless so that you can "read the files on your desktop."
    2. Open a command prompt window (start > run > cmd > OK)
    3. Type the following command in the black command prompt window and press enter

      ipconfig/all > "% userprofile%\Desktop\testdata.txt".

    4. Let the window open orders and "hard wire" your laptop to connect to Internet
    5. Type the following commands in the black command prompt window and press ENTER after each one

      ipconfig/all > "% userprofile%\Desktop\testdata.txt".
      Notepad '% userprofile%\Desktop\testdata.txt '.

    6. Copy and paste the contents of the testdata.txt file into your answer here

    Please note that there are 2 for the second command ipconfig > characters.

    You can close and remove testdata.txt (which is located on your desktop) and close the command prompt window.

  • Why can't connect me my xbox to my laptop with an electrician? I can see my xbox on my computer but I can't connect to internet

    I can see my xbox on my computer but I can't connect to the internet. I don't know what to do

    Hello

    Maybe this can help.

    http://support.Microsoft.com/kb/978618

  • How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

    How can I change my laptop and my screen be displayed in Portrait rather than landscape? (in other words, I want to turn my laptop on its side to display more information by page)

    Vista running on a Toshiba Satellite L500

    Hello

    Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

    If this does not work: right-click on empty office rotation - graphics options.

  • I had to reset my computer and now I have to reload everything on my computer. I tried to download it but I can't.  How do I get Acrobat Pro XI back on my computer?

    I had to reset my computer and now I have to reload everything on my computer. I tried to download it but I can't.  How do I get Acrobat Pro XI back on my computer?

    Download & install instructions https://forums.adobe.com/thread/2003339 can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  • I bought 13 elements upgrade, it wouldn't install XP.  Now, I want to install it on my other computer with Windows 8, 1 & Elements 7, but I can't seem to install Abobe site again.  What should I do?

    I bought 13 elements upgrade, but it would not install XP.  Now, I want to install it on my other computer with Windows 8.1 & Elements 7, but I can't find a download site in my account more. What should I do?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Download and installation to Prodesigntools help links are located on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions". window using the Lightroom 3 link to see these "important Instructions".

  • I have a desktop Dell Windows 7, a Windows XP laptop computer and a range of printers HP 3050 has, but I can't get the laptop to Windows XP to print wireless.

    I have a new computer (Windows 7) Dell, a new printer (HP 3050 has) and a laptop with Windows XP.  I can't get my laptop to print.  I installed the software.  Help

    original title: Networking

    You use the HP 3050 has as a wireless printer, or have you connected it to the Windows 7 computer via USB?

    You have a wireless router?  What brand and model?

    Assuming the printer is wireless, what happened when you put the CD in the Windows XP laptop?  Although these printers can be installed manually, it is much easier to let the installer of HP to do.  This is page 3 of the "reference Guide" (emphasis added):

    You can share the printer HP Deskjet with other computers which are also connected to your home network. If the HP Deskjet is already connected to your network home and installed on a computer on the network, for each additional computer you install the HP Deskjet software. During the installation of the software, the software will automatically detect the HP Deskjet printer on the network. Because the HP Deskjet is already connected to your network, there is no need to configure it again when you install the HP Deskjet software on other computers.

    Please describe all the steps you have taken and the symptoms you have.  If you receive error messages, enter them completely, without paraphrasing.

  • Equium A100-147: can I connect my laptop to my desktop hard drive?

    My computer laptop satellite has a permanent error when I turn it on: "autochk program not found - skipping autocheck.

    I've tried everything I can think (and advice of you internet) to get the data on my laptop hard drive, including the creation of a boot disk (using an external floppy drive) and a knoppix disk and nothing worked.

    Now, I suppose that if I can connect the hard drive laptop on my desk, I can get the data in this way? But how can I do?

    I bought an IDE 3.5 "to 2.5" adapter disk hard drive, but the instructions indicate that laptop hard drive must have a male connector 44? The hard drive is a Toshiba MK6034GSX and when I removed it I couldn't see 44 pine?

    Any help would be greatly appreciated.

    Thank you

    Yes you can do it, but you need USB 2.0 2.5 hard drive enclosure Kit ".
    Make sure that you buy a box with the right interface. Your HARD drive is SATA HDD.

    If you can connect the laptop HDD s to every desktop or laptop as external HARD drive and you will have access to all stored data.

  • I inserted the wireless network card, but it does not work on Satellite A30

    Hello please, be gentle, lol.

    I have a Satellite A30, no manuals, disks etc. of second hand.
    I had to buy a wireless card and installed it myself (error?).

    The card is an Intel P/N: PA3362U 1MPC.

    My is... have issue I installed it properly (see below), and can someone point me in the right direction for the correct driver?

    (Correct?) installation... .clipped perfectly in the slot in the compartment in the base of the laptop. Two sons rolled? one longer than the other?
    I plugged them as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
    How could I not if it works?

    The LED does not illuminate when the wifi switch is on?
    Is it normal when the driver not installed? FN + F8 has no effect? Again the ths is normal without driver installed?

    Thank you in advance, I'm completely stuck here... Matt

    Hello

    The PA3362U 1MPC seems to be a network wireless Intel PRO/Wireless 2200BG MiniPCI Type 3b card. I think it is s ok and should be compatible.

    The WLan driver should be found here:
    http://APS2.toshiba-tro.de/WLAN/
    Take the Intel PRO/Wireless 2200/2915 driver.

    > I plugged these as follows... more long wire to THE & shorter wire by HAND (on map)? Does this sound correct?
    I put t know which wire is short or long, but the two sons are different in color.
    Should the white cable goes to the hand and Brown to the auxiliary voltage

    See also this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=45273

    > How could I not if it works?
    Well, you will not be able to connect to the Wlan ;)

    > Is - this normal when the driver is not installed? FN + F8 has no effect? Again the ths is normal without driver installed?
    You should check if the other FN keys work correctly. If other n t FN keys work then Fn + F8 does not work too

    PS: you can activate the WLan also in Device Manager-> properties-> tab advanced Wlan card

    Welcome them

  • Ethernet, the network card drivers missing after I restarted my laptop

    I have a portable 2000, windows 7 64 bit, I have restarted my laptop because it was slow and now the network and ethernet controller drivers are gone, can someone please help!

    OK got that...

    Here are the Ethernet services and network card drivers:

    Realtek LAN driver (LAN):

    Link:http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-112547-1&cc=us&dlc=en&lc=en&os=4132&product=5305061&sw_lang=

    RALink 802.11 Wireless LAN adapt:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111691-1&cc=us&DLC=en&LC=en&OS=4132&product=5305061&sw_lang=

Maybe you are looking for