My Dish TV recorder USB key.

Similar Questions

• How to record the recovery of BitLocker on USB key code?

  How to record the recovery of bitlocker on my USB key code?

  Original thread: BitLocker

  Hi, nurse,.

  If I understand correctly you want to activate the Bit locker on your computer and save the recovery on USB code.

  Please follow the steps below to do so:

  1. Press Windows + X, and then select Control Panel.
  2. Click system and security, and then click BitLocker Drive encryption.
  3. Click on turn on BitLocker for the operating system disk. BitLocker will scan your computer to make sure that it meets the requirements of system for BitLocker. If your computer meets the requirements, BitLocker informs you of the next steps that should be adopted to enable BitLocker, such as preparation by car, turn on the TPM module and encrypt the drive.
  4. Secure once the TPM is initialized, the BitLocker Setup Wizard prompts you to pick how to store the recovery key. You can choose 'Save the recovery on a USB flash drive key' and follow the instructions on the screen.

  Hope this information is useful. Please let us know if you need more help with Windows, we will be happy to help you.

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• If you like a challenge? Weird USB problem, he does not see my own USB key, but he sees another USB, but on other computers - it - see my USB key! P.S., Already tried a lot of solutions (unemployed). I'm an ITer.

  Hey there.

  I have the weirdest problem ever. I have a computer that does not see my USB, other computers but do not see my USB.
  Now, we tried another usb key (with usbstick I mean a ^_^ usb flash drive) and he DOES not see that stick! My own stick is a SANDISK Cruzer without U3, just ordinary storage 8gigs. None of the firmware see-as-CD. And the other was a different brand, but I don't remember.

  I also tried to plug a very specific device (A P2000 keystrokes recorder, it is a device that recorded incidents, I work for the firedepartment/police/ambulance and it records events), but he doesn't know that aswell of device, as if it has never been plugged in (we have installed the correct drivers for it).

  Now, I did some standard troubleshooting (check drivers, drivers of reupdating) and I removed all the usb drivers, restarted, drivers were back as usual, is not yet connect mine but it connects the other stick. My usb key works perfectly well with all computers but this one (same for the recorder to P2000), reupdated and installed, checked and stuff. Ports SHOULD work.

  I would appreciate help! Thank you!

  P. S.
  More info; It does not take into account the USB and connects anything, even the little blue light inside the usb key does not illuminate. Its as if she was never plugged on. The other has worked flawlessly on the same port, however. And my USB works on other computers. (Ditto for the P2000, but is not on the P2000.)

  P.S.S.
  I guess my computer-type is too relevant?

  Its a HP Compaq dc7100 Small Form Factor.
  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=NL&CC=NL&ContentType=SupportManual&docIndexId=64255&prodTypeId=12454&prodSeriesId=410112&lang=NL&CC=NL
  All the statistics are there.

  Hello

  We concluded that the PC was actually broken. (He suddenly begins to restart and stuff randomly gave away.)

  .. Third PC in a line that falls down and breaks down...

• How can I save items on a USB key with Vista?

  original title: using Flash Drive

  How can I save items on a USB key with Vista

  Plug the Flash drive.  Go to start / computer and find your USB drive listed there.  Find what you want to record on the FlashDrive (from other units identified in Explorer) and copy / them (CTRL + C) and then go to your USB key and click it to open it and press Ctrl + V to paste the files.  That's all there is to it.  You can create folders to store files, like flash drives have limits on the number of files can be stored in the root directory (but not folders).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to restore a backup made via the Dell USB key Solution?

  I have a backup on an external disk created with the Dell USB key Solution and takes the name 05-01-2012_135210_Backup and looks like this:

  Directory of E:\05-01-2012_135210_Backup
  05/01/2012 17:21

  .
  05/01/2012 17:21 ...
  05/01/2012 17:21 APPS. INP
  05/01/2012 APPS_0000.INP 942 17:21
  05/01/2012 APPS_0001.INP 1 449 984 17:21
  05/01/2012 17:21 3 713 788 DATA. INP
  05/01/2012 17:21 949 160 DATA_0000.INP
  05/01/2012 16:59 DATA_0001.INP 650,996,224
  05/01/2012 17:00 DATA_0002.INP 650,377,728
  05/01/2012 DATA_0003.INP 650,780,672 17:01
  05/01/2012 DATA_0004.INP 650,156,544 17:01
  05/01/2012 DATA_0005.INP 650,135,040 17:02
  05/01/2012 17:03 DATA_0006.INP 650,592,768
  05/01/2012 17:03 DATA_0007.INP 650,867,200
  05/01/2012 DATA_0008.INP 650,413,568 17:04
  05/01/2012 DATA_0009.INP 650,225,152 17:05
  05/01/2012 DATA_0010.INP 650,678,272 17:05
  05/01/2012 17:06 DATA_0011.INP 651,130,880
  05/01/2012 17:07 DATA_0012.INP 650,716,160
  05/01/2012 DATA_0013.INP 650,323,968 17:08
  05/01/2012 DATA_0014.INP 650,544,640 17:08
  05/01/2012 17:09 DATA_0015.INP 650,903,552
  05/01/2012 DATA_0016.INP 650,121,728 17:10
  05/01/2012 DATA_0017.INP 650,273,280 17:11
  05/01/2012 DATA_0018.INP 650,703,872 17:12
  05/01/2012 DATA_0019.INP 650,381,824 17:13
  05/01/2012 DATA_0020.INP 650,613,248 17:13
  05/01/2012 DATA_0021.INP 650,506,752 17:14
  05/01/2012 DATA_0022.INP 650,527,744 17:15
  05/01/2012 DATA_0023.INP 650,539,008 17:15
  05/01/2012 DATA_0024.INP 650,273,792 17:16
  05/01/2012 DATA_0025.INP 650,347,520 17:17
  05/01/2012 DATA_0026.INP 651,014,656 17:17
  05/01/2012 DATA_0027.INP 650,540,544 17:18
  05/01/2012 DATA_0028.INP 478,608,896 17:21
  05/01/2012 include.xml 2 281 350 17:21
  05/01/2012 migr.xml 1 330 286 17:21
  35 file (s) on 18,053,022,754 bytes
  2 dir 607,587,577,856 bytes free

  I was not able to complete the full implementation of the solution Dell Direct USB key due to various problems.  .    Dell ended up sending me a new Windows 7 HARD disk image.   I have now the laptop up and running again with Windows 7 and have various applications installed.   That's all pretty well.  But now how do I get my data files restored?   Basically, I want to connect the external drive to backup and complete step 19 of the solution, as described below.

  
  Here are the steps OS using the Dell USB key: 
  
  1. Boot from the Direct USB Key by tapping F12 at the Dell logo, then select the
  USB Memory Key option from the boot device menu. 
  
  2. Accept the Dell End User License Agreement (EULA) by clicking the box next to
  Accept, scroll down till the end of the license agreement and then click on
  continue. 
  
  3. On this screen, the usb key gives an overview of the process it is about to
  perform, click continue when ready to proceed. 
  
  4. The Smart Repair solution runs a surface scan on the system to identify any
  errors with the boot record or the startup files. If any errors are found, they
  are automatically corrected. 
  
  5. Once the process completes, there will be an analysis summary, in this case,
  there is no issue found by the smart repair, click continue. 
  
  6. In this window the user can select what data they would like to back up, they
  can either go with the default backup solution or they can click select more to
  select more files for backup, click continue after selecting files for backup. 
  
  7. If user clicks on select more, they will get the screen below, they can go
  ahead and select the necessary data for backup by checking the box next to the
  respective folder, sub-directories are selected by default once the root folder
  is selected. 
  
  8. The user will be prompted to attach a USB hard drive to the system, user
  needs to connect the USB Hard drive at this point and click continue. 
  
  9. Once the solution detects the USB hard drive , it goes ahead with file
  backup. 
  
  10. Once the files are backed up, the solution will back up the user personal
  settings. 
  
  11. The Direct USB Key displays a summary of the data and personal settings
  backup. Click continue. 
  
  12. The Direct USB key then proceeds to install the operating system image on
  the system. 
  
  13. Once the operating system image is transferred, the drivers are also
  transferred. 
  
  14. After the operating system image and driver transfer, a summary page comes
  up giving the user information as to what process was performed successfully and
  what failed. The user needs to remove the USB key at this point and click
  restart. 
  
  15. The system restarts and comes to a flash screen on recovery and restore. 
  
  16. After the flash screen, the applications start installing. 
  
  17. Once the applications are installed, the user would see a summary screen
  informing them that the Operating system has been restored, connect the Direct
  USB Key and click restart. 
  
  18. After the restart the user will be prompted to connect the data backup hard
  drive and then click continue. 
  
  19. The files and personal settings are then restored from the USB backup drive. 
  
  20. After the files are transferred the system comes to the desktop with a pop
  up window informing the user to check the device manager for any exclamation
  marks, the tool also guides the user to download the drivers from the support
  site and the applications from My Dell Downloads and Dell Digital Delivery. User
  needs to select the check box to prevent the message from being displayed again
  and click close. 
  
  =============================================
  
  What program/utility can be used to run step 19  to restore my data?
  

  Thanks in advance!
  

  The Windows Migration utility (MigRestore) was obtained from Dell, decompressed and Support execution of data taken with the backup restore.

• I get startup repair screen when I try to boot my laptop from dell inspirion windows 7, I run the scan and detects any errors. When I ran repair usb key received the error 0x400110020000100A

  I get startup repair screen when I try to boot my laptop Dell Inspiron windows 7, I run the scan and detects any errors. So, I tried to use a USB repair for a laptop Dell Latitude Windows 7 pro and I still can't the computer to start. Tried to restore to the factory settings, can not. I have no image, backups, all missing, restore points?

  After that I tried to launch the USB repair I got 0x400110020000100A error code and I received error (0x8007027E) indicating the device will not start without a reboot.

  Anyone know how to fix this?

  Any advice would be greatly appreciated. I'm not computer illiterate, but am not pro either. Just use them not program them or even understand all languages!

  ____________________________________________________________________________________________________________

  Dell Inspiron laptop about 4-5 years.

  Running windows 7 Home Edition.

  Does not start little matter what I tried.

  If I remember correctly, I looked in MS-DOS mode and noticed that it said something like "x: win...» "that seemed strange to me because I thought that it should say"c: victory... "but as I said I am not a computer wiz so if anyone can help me, I would appreciate it.

  I'm about to rip the hair off my head with my laptop. My latitude was blue planned, surprisingly I fixed it (don't ask how, you couldn't tell). Then my dell inspiron would not start right after my dell latitude fell out of my truck and landed on the sidewalk, wanted to kill the person, the screen is broken. I can use it but it is very difficult, see a mosquito net and not perfectly clear, works well. lol someone knows somewhere or that would install a new screen for a reasonable price? I live in the Boston area.

  Back to the laptop won't start not, when I ran repair USB key received the error 0x400110020000100A

  Hello

  Thank you for the update on the issue. I appreciate your time and effort in resolving this issue.

  You can try the following methods and check if it helps.

  Method 1:

  You can use the Bootrec.exe tool in the Windows recovery environment (Windows RE) to troubleshoot and repair the following items in Windows Vista or Windows 7:

  • A master boot record (MBR)
  • A boot sector
  • A Boot Configuration data (BCD) store

  Note: When you are troubleshooting startup issues by using the Windows RE, you should first try the Startup Repair option in the System Recovery Options dialog box. If the Startup Repair option does not resolve the problem, or if you must troubleshoot more steps manually, use the Bootrec.exe

  Use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  If the problem persists, proceed to method 2.

  Method 2:

  Please follow these steps:

  1. Tool command prompt open in the mode of the Windows recovery environment .
  2. You will see X:\Sources
  3. Type chkdsk c:\ at the flashing prompt to launch the utility Chkdsk. replace c:\ with the letter of the drive that you want to run the Chkdsk utility. If the hard drive is d:\, then type that instead.
  4. After the "chkdsk c:\. "insert \f command to fix errors on the disk volume or the \r to recover bad sectors and then press ENTER.
  5. Restart the computer once the chkdsk command has completed.

  Note: Running chkdsk on the drive if bad sectors are found on the hard drive, it attempts to repair this sector, if all available on which data may be lost.

  For more information: Please refer to the section of the additional If you can not boot into Windows at all stages in the following link.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-in/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I would like to know how to install Windows Server 2008 and Windows 7 Enterprise from a USB key, please.

  I'm not trying to run either on the USB key, I just need to know how to install from a USB key. I tried Multiboot, grub for DOS and other, but they do not seem to work :/

  I am going through a book that uses these two to form Microsoft MCITP: Server 2008 Administrator and if I could install these Via USB, this would save my records and a lot of hassle... basically just for convenience, as everything that I need will be on a stick * lol *.

  Otherwise, I'll have to use discs instead :)

  Take a look at this:

  http://www.Haiders.NET/post/installing-Windows-Server-2008-from-a-USB-Flash-pen-drive.aspx

  Like to make a bootable USB with WIndows 7, take a look to use the following:

  Download Windows 7 USB/DVD tool

  http://store.Microsoft.com/help/ISO-tool

• I need to do to copy a model of title on a USB key, so I can use it in the other computer. How can I do?

  I need to copy a model of title on a USB key, so I can use it in the other computer.

  How can I do?

  On 1 PC export to the USB key as title and move the usb to PC 2. Import the track recorded for the first as a title, open and add styles.

• Boot Camp El Capitan Windows ISO USB key

  Install Windows 7 with a USB key that is already configured as a windows installation disc, Boot Camp did not acknowledge the presence of the USB and claimed installation media. I inserted the DVD and it started to install.

  Is it possible that the Thumb control procedure is no longer necessary or do I lucky/unlucky?

  If she doesn't have a drivers W7 Apple pre-start, it won't work.

• Space available USB keys

  Hi, I have a few (FAT32) USB key that I use as backups. I delete the files to send it to the trash, but when I try to use the system says there is not enough space. There is no indication in the Finder, but when I looked on the stick in a PC it showed a directory trash with files deleted in it. Hence the lack of space.

  How to bring back the full storage space?

  I like to keep interchangeability FAT32 format.

  Empty the trash before dislodge you.

• USB key came into read-only mode

  Hello

  This morning my USB key came into read-only mode and I can't reverse this trend. I just assumed to come from the third party who helped me write on NTFS, but I have a drive HARD Toshiba (NTFS) that works and a USB key that is read-only. I changed the third party software and the same result. I tried the option 'get info' and I still do not see the permissions.

  I tried to format the drive - because it is read-only won't let me not - it. And so on.

  I tried disk utility - no result.

  I need an idea, suggestion, something for it to work.

  Thank you.

  When some Flash storage starts to falter, it locks in a read-only mode. So, it might be failing.

  When you try to format the drive, you must select the drive itself in disk utility, not partitions. If that's how you try to reformat, so I guess it's a failure.

• USB key used in iMac unrecognized by any other device

  Hi all, I recently encountered a problem using USB keys with my iMac 2010 10.11.3 running OSx.

  My iMac will recognize UBS sticks and allow me to save documents and files for them, but when I insert into any other device (e.g. a few friend PC and Macs, professional printers to Officeworks etc.) the USB stick is not recognized and does not see the same on their system.   Then when I insert the USB in my iMac, it is recognized immediately as well as its content.

  Before that, I was able to share files and documents with family, friends and clients on USB with no problems at all.

  I tried a variety of different USB keys (old and new) and what is happening to all of them, whatever the brand, age, size, etc.   Is produced only for a few months and at first I was in denial and thought that it was my friend PC, but now I see that it is certainly a problem with my iMac.  He may have started happening around the same time that when I upgraded to IE Captain earlier this year.

  Any ideas please?

  Thank you.

  eccydee

  The fact that this happens with different computers suggests that the problem could be the configuration.

  Go to Applications/Utilities/Disk utility. Insert your flash key and look at the settings. It may look like this:

  

  Everything on this list must be verified. While you're there, see if your USB is correctly configured:

  http://www.PCAdvisor.co.UK/how-to/storage/how-format-USB-stick-on-Mac-3434423/

• I am helping a friend who doesn't have a browser on his computer and want to download Firefox on a USB key. I can't find a way to do it, any help?

  I don't want to charge my laptop I already use Firefox. I need to know how to download on a USB key that I can load and then in the other laptop.

  You can download a complete installer from this page (scroll down to his preferred language):

  https://www.Mozilla.org/Firefox/all/

  I suggest to download hard disk and then copying to the USB flash drive in Windows Explorer (you can click on the folder icon on the right side of the download for the file list to open a window for her). That way Firefox will try to access the flash player in the future as your last used download location.

• I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  I have the model of macbook air 2016 with i5 Professor and 8 GB ram... since it's the fastest ssd, but I have not seen all speeds up to now, I want to say is bcz I need to have usb 3.0 USB key or hard drive to see the speed of the ssd to usb 2.0 will work

  What do you mean, your message is not clear.