My double heart showing only 1 core taskmanager

Similar Questions

• Windows resource monitor shows only a CPU core when he should have four.

  Windows 7 Home Premium 64-bit, SP1
  Intel Core i3 2330 m-hyperthreading

  Resource monitor normally indicates two nuclei and Hyperthreaded (a total of four graphs) when seen on the tab CPU recently single core (one graph) is displayed. This change is caused by one of the updates of Windows or an indicator of a hardware problem? Is there a recommended KB or a patch that solves it?

  original title: change of resource monitor (?)

  You asked: "what version of Windows 7 do you have?" ... Home Premium x 64, SP1 as indicated at the beginning of my first post.

  As my screen name, incurably curious, says I couldn't let it go. Assistance in the meantime, I searched tirelessly and found a cure. I had to make a change through msconfig. I don't have any idea how the settings have been changed because no one else is using this machine.  [????] (Microsoft Security Essentials and Malwarebytes returns own scans; so I doubt that the cause is associated malware.) The following explains what I've done and the results.

  1. I went into msconfig > startup > advanced options and find the number of processors, set one. The arrow to expand a menu drop-down has also shown that a single processor. Which did not make sense because my processor Intel Core i3 2330 M's two core with hyperthreading.
  2. I unchecked the box and restart the computer.
  3. I returned the number of processors as described in #1 above. Expand the menu gave me the choice of 1, 2, 3 or 4 processors. I chose two and checked the box.
  4. I rebooted the computer again.
  5. I checked the monitor of resources (via the Task Manager) and found multiple graphics, I'm used to the display. The graphics are labeled: Service use of the CPU, CPU 0, 1 parked CPU 2 CPU and CPU3 parked.
  6. Parked CPU1 and CPU3 parked show no activity, which is expected. These show only activity when hyperthreading is active, which is rare with the programs I run. Only programs written specifically to hyperthreading use the feature.
  7. CPU utilization service CPU2 and CPU0 show activity as expected.
  8. Manager tasks shows four graphs still now.

  The reason why I know not what to expect is that I have upgraded RAM and completed cooling there are a few months and one of my tools use resource monitor to control the computer. (I used other means to monitor the internal temperature). I managed to run enough programs to use more than 7 GB, the 8 GB available RAM and CPU usage Dungeon in the range of 75 to 100% for more than an hour during trials. Hyperthreading (CPU1 and CPU3) clearly indicated to be active too. Time CPU ran in the range 165F without additional cooling and order of 125-130 with additional cooling.

  I will wait for return of the answers with explanations and/or questions until I got this mark as resolved.

• Manager tasks shows only 4 graphics on the performance tab when it should display 8 for 3770 K & Win7 x 64

  When I open the performance tab of Task Manager I see that 4 graphs (showing the CPU core activity) instead of the 8 that I would see with a 4 core with hyper-threading processor. I have unplugged and plugged into the CPU 8 power connector pins several times and once I could see 8 graphics for about an hour until what he returned to only 4. Since then, I don't me 8 graphics no matter what I do. I replaced the MB, CPU, memory and power separately, but he never makes no difference.

  My father has a Dell with a 3770 and his task as managing only shows 4 graphics.

  I have an Asus P8Z77 - V Pro MB, i7 - 3770K, 16 GB Corsair Memory (2x8GB) CL9, PSU Corsair HX850 gold and Win 7Pro x 64. My father has a Dell with the same processor, but different everything (he has Win 7 HP x 64).

  4 graphics that appear are for 2 cores with hyperthreading. I can tell because Aida64 says only 2 hearts are running. I also only 4 graphics with the ASUS AI Suite 2 program.

  Windows is set to mode performance and no power saving features are enabled in Windows or the UEFI.

  Can someone tell me what is happening? How can I get 8 graphics is displayed all the time?

  Thank you

  Bruce

  Hi Bruce,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/threads

  Hope this information helps.

• X 1 carbon i7 showing only 4 processors in Device Manager

  I just bought 4 X 1 carbon i7 and I noticed that the Manager device (Windows 7 64 bit) shows only 4 processors instead of 8.  My HP desktop computers, which are also i7, show 8 (4 physical cores, 4 cores, Hyperthreaded) processors.  The X 1 bios shows hyperthreading is enabled and the msconfig file does not limit the number of cores.  No idea how to re-enable the missing processors?

  Hello

  I just took a glance at the expedition of Tabukand the only X 1 options carbon i7 I see are dual-core:

  Processor Intel Core i7-3667U (2 hearts, 2.0 GHz, 4 MB cache), Intel HD Graphics 4000,
  (Up to 1600 MHz) DDR3 memory controller, Intel Turbo Boost 2.0 (3.20 GHz), HT technology

  There may be a quad-core option, but I'm not.  What is your type of machine (for example 1234-xyz)?

  Z

• How can I customize my new tab page to show ONLY the websites that I want?

  Whenever I use the new tab it allows me to add some sites, but also displays the sites recently visited, but also the best sites. I want my new tab to show only sites I have add in 4 columns and 2 rows as what I had in my chrome.

  Hi, it won't show recently visited until you have completed all the tiles with your own. When you have added a site that you want to keep here - PIN. See - customize the page new tab.

  More info on the page tab that could be of interest.

  You can change the number of tiles on the Page of the new tab to zoom in or out (Ctrl and + key, or Ctrl and - key).

  You can also keep the same zoom setting when a new tab is clicked: Type Subject: config in the address bar, press ENTER, accept the warning, scroll to browser.newtab.preload and double-click on it to change the 'value' of true to False.

  It is also possible about: config to change the maximum number of tiles, scrolling to the browser.newtabpage.columns (or Rows), then right-click > modify to set a new number of 'value '.

  As an alternative, you might like to try the add-on new tab tools.

  If your question is resolved by this or another answer, please take a minute to let us know. Thank you.

• I do the buttons on the taskbar show only icons, but I wanted it back.

  what I did before the buttons on the taskbar show only icons is as follows:

  Start > run > regedit > HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics

  There, you must find the one "REG_SZ" with the name "MinWidth".

  (write without quotes)

  If you do not create one in your won with the name "MinWidth".

  (write without quotes)

  Once you find it double click on it and set the number 56 then click ok and close.

  Registry and restart your computer.

  
  

  
  

  ---------------------------------------------------------------------------------------------------------

  
  

  minWidth had-255, I changed it back, but the taskbar do not change back. What should I do now?

  
  

  Here's the screen shot a http://oi51.tinypic.com/15dl2pz.jpg link

  
  

  
  

  
  

  
  

  
  

  Use this tutorial: go to an Option and take #2 - restore the task bar button

  http://www.Vistax64.com/tutorials/191509-taskbar-icons.html . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Hello my creative cloud application is empty and showing only white, I can't update or no matter what I tried to re-isntal and nothing and I try too update via photoshop and also said, if I try to update via photoshop I get this Adobe Application Manag

  Hello my creative cloud application is empty and showing only white, I can't update or no matter what I tried to re-isntal and nothing and I'm trying to update also via photoshop and also says, if I try to update via photoshop I get this Adobe Application Manager is required to solve this problem. However, it is missing or damaged. Please download and install a new copy of Application Manager of 'http://www.adobe.com/go/applicationmanager'.  but I also can't help using the application manager

  Follow the procedure below:

  N ° 1)

  Adobe Application Manager trash from Applications > utilities.

  Step 2)

  Click on the link below and download Adobe Application Manager and install the same.

  http://download.Adobe.com/pub/Adobe/creativesuite/CC/Mac/ApplicationManager9.0_all.dmg

  Once the installation is complete, a niche will disappear.

  Then open " Applications" folder and locate the launch of Adobe Application Manager icon and double-click it and update.

• Shade of color shows ONLY shades of gray on the gradient layer...?

  My color chart seems to be defaulting to only shades of gray on a gradient layer, and I can just find a way to let him replace the color I chose.  After that I created a new layer of gradient fill, when I have the layer selected in the layer list on the right side of the screen, color samples show ONLY gray.  If I click on the sample, it brings up the color selector, but no matter what color I select, the swatch shows shades of gray.  If I select the background layer, it goes back to show my color.

  There's probably a simple explanation to this problem, but I was searching Google for literally hours without finding an answer.  I found some similar questions have the response "go to Image, Mode, and make sure that RGB is selected."  Mine is already set to RGB, so it's not the question.

  How can I change the colors in a gradient fill layer, and why my color chart displays grayscale only when I selected gradient fill layer, even if by clicking on the color chart reveals the color picker?

  To change/edit the gradient colors, double click on the thumbnail of the gradient in the layers panel fill

  Then in the gradient fill box, click just to the right of the gradient word to change the colors

  In the gradient editor, click one of the stages of the color at the bottom of the gradient bar and click color to change the color of this judgment

  There is much more to the gradient to the room Editor to explain on the forum, so you can view the following for more information

  Photoshop elements help | Gradients

  Using Photoshop | Gradients

  The reason for which continues to show your color in levels of gray, is the layer mask is still active with adjustment layers in photoshop elements and layer masks are grayscale

  Photoshop elements help | Layer masks

  

• Firefox ESR 24.8.1 - Flash Video shows only 1/4 of the image with Mac mid-2014, Retina Display

  Question: Flash - YouTube, flat Anywhere, Nickelodeon (only three tested) movies all show only top left 1/4 of the screen.

  Perceived the question: given that the retina has double the number of pixels, only the 'real' number of pixels is used, who is half - half higher, and half left, is only the upper left corner.

  Flash version 15.0.0.152

  Mac OS 10.9.5

  Hardware problem: Retina Display.

  Browser: Firefox ESR 24.8.1 (updated)

  Additional notes: changing playback of YouTube's Flash player to HTML makes the reading of the work.

  Moving the window to an external monitor (no retina) makes reading flash works.

  This is only the case for playback flash on the monitor of the retina; not for the non on the retina, no flash on non-retine.

  My question: how to make this work on my retina display? The choice of only possible browser for me are firefox and safari, and I really want to avoid safari for other reasons.

  Well...

  It turns out that the passage of 24.8 Esr Firefox with the non-beta plugin to 31.1 ESR Firefox with the beta plugin solves.

  Confirmed - it works fine on both sites tested so far which gave me bad.

  Now I just a new GUI on firefox to get used to... (at least it was only once a year now.)

• Guest operating system show only 2 CPU on DP67BG

  I have a problem my Guest OS Windows 7 x 64 sp1 show only a 2-processor motherboard intel DP67BG.

  This is my environment

  Motherboard: Intel DP67BG (Bios 1900)
  CPU: Intel Core i7 2600
  ESXi 4.1 Build 348481

  Guest OS: Windows 7 Ultimate SP1

  1 - esxi summary screen shows 8 logical processors

  

  2 - guest OS config is selected the screen 8 processors

  

  screen 3 - properties of OS guest

  

  and the guest operating system device manager

  

  screen 4 - CPU bios motherboard selector

  

  Is - this question hypervisor or motherboard problem?

  Thank you.

  Welcome to the community,

  Windows 7 supports only 2 CPU. If you need more 2 vCPUs in the comments you will need to present the vCPUs as multi core vCPUs. See http://kb.vmware.com/kb/1010184 for more details.

  André

• Show only user information after the connection

  Hello world

  I hope someone can help me please, I'm new to databases and programming.

  OK, I just created my first page of the login of the user (using the dreamweaver builtin functions).  Nowi have successfully built a MySQL database, insert a table with username, userPass and e-mail.  The login page works correctly and redirects to the authorized page

  Now, this is where I get lost.  On the authorized page, I want that it lists the information related to that user only, IE display their username and your email address.  What I can't work.  I'm sure you must filter to show only the logged-in user, but I can't see anything at all.

  Help, please

  My login page

  <?php require_once('Connections/connection.php'); ?>
  <?php
  if (!function_exists("GetSQLValueString")) {
  function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "") 
  {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
    $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
    switch ($theType) {
      case "text":
        $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
        break;    
      case "long":
      case "int":
        $theValue = ($theValue != "") ? intval($theValue) : "NULL";
        break;
      case "double":
        $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
        break;
      case "date":
        $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
        break;
      case "defined":
        $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
        break;
    }
    return $theValue;
  }
  }
  mysql_select_db($database_connection, $connection);
  $query_users = "SELECT * FROM tbl_users";
  $users = mysql_query($query_users, $connection) or die(mysql_error());
  $row_users = mysql_fetch_assoc($users);
  $totalRows_users = mysql_num_rows($users);
  ?><?php
  // *** Validate request to login to this site.
  if (!isset($_SESSION)) {
    session_start();
    if (isset($_POST['userName'])) {$_SESSION['userName'] = $_POST['userName'];}
  }
  $loginFormAction = $_SERVER['PHP_SELF'];
  if (isset($_GET['accesscheck'])) {
    $_SESSION['PrevUrl'] = $_GET['accesscheck'];
  }
  if (isset($_POST['username'])) {
    $loginUsername=$_POST['username'];
    $password=$_POST['password'];
    $MM_fldUserAuthorization = "";
    $MM_redirectLoginSuccess = "index.php";
    $MM_redirectLoginFailed = "login.php";
    $MM_redirecttoReferrer = false;
    mysql_select_db($database_connection, $connection);
    
    $LoginRS__query=sprintf("SELECT userName, userPass FROM tbl_users WHERE userName=%s AND userPass=%s",
      GetSQLValueString($loginUsername, "text"), GetSQLValueString($password, "text")); 
     
    $LoginRS = mysql_query($LoginRS__query, $connection) or die(mysql_error());
    $loginFoundUser = mysql_num_rows($LoginRS);
    if ($loginFoundUser) {
       $loginStrGroup = "";
      
      //declare two session variables and assign them
      $_SESSION['MM_Username'] = $loginUsername;
      $_SESSION['MM_UserGroup'] = $loginStrGroup;       
      if (isset($_SESSION['PrevUrl']) && false) {
        $MM_redirectLoginSuccess = $_SESSION['PrevUrl']; 
      }
      header("Location: " . $MM_redirectLoginSuccess );
    }
    else {
      header("Location: ". $MM_redirectLoginFailed );
    }
  }
  ?>
  <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Untitled Document</title>
  </head>
  <body>
  <form id="form1" name="form1" method="POST" action="<?php echo $loginFormAction; ?>">
    <label>User Name:
    <input type="text" name="username" id="username" />
    </label>
    <p>
      <label>Password:
      <input type="password" name="password" id="password" />
      </label>
    </p>
    <p>
      <label>
      <input type="submit" name="submit" id="submit" value="Submit" />
      </label>
    </p>
  </form>
  </body>
  </html>
  <?php
  mysql_free_result($users);
  ?>
  
  

  My page authorized

  <?php require_once('Connections/connection.php'); ?>
  <?php
  //initialize the session
  if (!isset($_SESSION)) {
    session_start();
  }
  // ** Logout the current user. **
  $logoutAction = $_SERVER['PHP_SELF']."?doLogout=true";
  if ((isset($_SERVER['QUERY_STRING'])) && ($_SERVER['QUERY_STRING'] != "")){
    $logoutAction .="&". htmlentities($_SERVER['QUERY_STRING']);
  }
  if ((isset($_GET['doLogout'])) &&($_GET['doLogout']=="true")){
    //to fully log out a visitor we need to clear the session varialbles
    $_SESSION['MM_Username'] = NULL;
    $_SESSION['MM_UserGroup'] = NULL;
    $_SESSION['PrevUrl'] = NULL;
    unset($_SESSION['MM_Username']);
    unset($_SESSION['MM_UserGroup']);
    unset($_SESSION['PrevUrl']);
   
    $logoutGoTo = "login.php";
    if ($logoutGoTo) {
      header("Location: $logoutGoTo");
      exit;
    }
  }
  ?>
  <?php
  if (!isset($_SESSION)) {
    session_start();
  }
  $MM_authorizedUsers = "";
  $MM_donotCheckaccess = "true";
  // *** Restrict Access To Page: Grant or deny access to this page
  function isAuthorized($strUsers, $strGroups, $UserName, $UserGroup) { 
    // For security, start by assuming the visitor is NOT authorized. 
    $isValid = False; 
    // When a visitor has logged into this site, the Session variable MM_Username set equal to their username. 
    // Therefore, we know that a user is NOT logged in if that Session variable is blank. 
    if (!empty($UserName)) { 
      // Besides being logged in, you may restrict access to only certain users based on an ID established when they login. 
      // Parse the strings into arrays. 
      $arrUsers = Explode(",", $strUsers); 
      $arrGroups = Explode(",", $strGroups); 
      if (in_array($UserName, $arrUsers)) { 
        $isValid = true; 
      } 
      // Or, you may restrict access to only certain users based on their username. 
      if (in_array($UserGroup, $arrGroups)) { 
        $isValid = true; 
      } 
      if (($strUsers == "") && true) { 
        $isValid = true; 
      } 
    } 
    return $isValid; 
  }
  $MM_restrictGoTo = "login.php";
  if (!((isset($_SESSION['MM_Username'])) && (isAuthorized("",$MM_authorizedUsers, $_SESSION['MM_Username'], $_SESSION['MM_UserGroup'])))) {   
    $MM_qsChar = "?";
    $MM_referrer = $_SERVER['PHP_SELF'];
    if (strpos($MM_restrictGoTo, "?")) $MM_qsChar = "&";
    if (isset($QUERY_STRING) && strlen($QUERY_STRING) > 0) 
    $MM_referrer .= "?" . $QUERY_STRING;
    $MM_restrictGoTo = $MM_restrictGoTo. $MM_qsChar . "accesscheck=" . urlencode($MM_referrer);
    header("Location: ". $MM_restrictGoTo); 
    exit;
  }
  ?><?php
  if (!function_exists("GetSQLValueString")) {
  function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "") 
  {
    $theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
    $theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
    switch ($theType) {
      case "text":
        $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
        break;    
      case "long":
      case "int":
        $theValue = ($theValue != "") ? intval($theValue) : "NULL";
        break;
      case "double":
        $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
        break;
      case "date":
        $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
        break;
      case "defined":
        $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
        break;
    }
    return $theValue;
  }
  }
  $colname_Recordset1 = "-1";
  if (isset($_SERVER['MM_Username'])) {
    $colname_Recordset1 = $_SERVER['MM_Username'];
  }
  mysql_select_db($database_connection, $connection);
  $query_Recordset1 = sprintf("SELECT * FROM tbl_users WHERE userName = %s", GetSQLValueString($colname_Recordset1, "text"));
  $Recordset1 = mysql_query($query_Recordset1, $connection) or die(mysql_error());
  $row_Recordset1 = mysql_fetch_assoc($Recordset1);
  $totalRows_Recordset1 = mysql_num_rows($Recordset1);
  ?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
  <html xmlns="http://www.w3.org/1999/xhtml">
  <head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
  <title>Untitled Document</title>
  </head>
  <body>
  <p align="center">WELCOME <strong><?php echo $row_Recordset1['userName']; ?></strong>,</p>
  <p align="center">IF YOU ARE VIEWING THIS PAGE THEN YOU HAVE SUCCESSFULLY LOGGED IN</p>
  <p align="left"> <a href="<?php echo $logoutAction ?>">Log out</a></p>
  </body>
  </html>
  <?php
  mysql_free_result($Recordset1);
  ?>
  

  You have selected the wrong option in the fields of the Recordset dialog box filter. You have chosen Server Variable. It is expected the Session Variable.

  

• When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  When I turn on my iPhone 6 screen shows only the background color, the icon usage and the reception icon.

  The iPhone's battery is fully charged?  Otherwise, load it, and then try again.

  If it is busy, go in recovery mode as explained here.  You may need to try to get into the mode of recovery once more to succeed.

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• 4 s phone shows only Apple icon & black screen.

  4 s phone shows only Apple icon & black screen. Computer message said: my phone cannot be updated and I should delete the data to create the space,.

  But how if she will not activate?

  If your iPhone or iPad does not respond, try the steps here:

  https://support.Apple.com/en-us/HT201412

• Can I create a folder in the tree diagram that shows only unread messages?

  Currently, I put rules in place to filter messages in several different folders. But I want to be able to read all new messages in the order they are received, regardless of who they are or this folder they have been filtered in. That's why I want a folder to show only unread messages. After that I read them, I don't want to appear in the file not read more.

  I already used this "Unread mail" feature in Microsoft Outlook (to the old job), my new job is using Thunderbird and I would still like to access functionality, if possible in Thunderbird.

  Thanks for any help!

  I use a saved search to do exactly what you ask.

  https://support.Mozilla.org/en-us/KB/using-saved-searches

• 'get info' show only 2 GB available; Finder displays 100 GB available. Where is my space?

  'get info' show only 2 GB available; Finder displays 100 GB available. Where is my space?

  http://pondini.org/OSX/LionStorage.html

  You can have a lot of "other".

  What is 'other' storage and what size should it be?

  You can try an app like Disksweeper

  https://www.OmniGroup.com/more

  or

  http://grandperspectiv.sourceforge.NET/